For supporting ATSC and QAM modes the driver should use a smaller IF frequency than 5 MHz.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix a few minor CodingStyle issues at the source code:
	- Use proper multi-line comments;
	- Align the log tables;
	- Remove the .type from dvb_frontend_ops, since this is not
	  needed anymore (since the drivers conversion to DVBv5);
	- Remove emacs format macro.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix most of checkpatch warnings like:
	WARNING: line over 80 characters
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Ideally, we should be replacing this function by intlog10().

While we don't do that, let's at least constify the tables,
in order to remove its code footfrint, and get rid of nelems.

This also fixes a few 80-cols CodingStyle warnings.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

WARNING: braces {} are not necessary for any arm of this statement
+		if (ret == 0) {
[...]
+		} else {
[...]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Get rid of the remaining checkpatch.pl warnings:
	WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The logic there is too complex and it looks like an inifite
loop.

So, simplify the logic and implement it as a for loop.

This gets rid of the following checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return
+			return LG3306_UNLOCK;
+		} else {

WARNING: else is not generally useful after a break or return
+			return LG3306_UNLOCK;
+		} else {
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use pr_foo() where there's a direct replacement. For debug, use
custom-made macros, for now, as there are 3 different debug levels.

We should get rid of those some day, specially since several such
macros can be just removed, as Kernel trace would provide about
the same output.

This gets rid of some checkpatch errors:

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+#define lg_info(fmt, arg...)	printk(KERN_INFO "lgdt3306a: " fmt, ##arg)

ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_dbg(fmt, arg...) if (debug & DBG_INFO)			\
+				lg_printk(KERN_DEBUG,         fmt, ##arg)

ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_reg(fmt, arg...) if (debug & DBG_REG)			\
+				lg_printk(KERN_DEBUG,         fmt, ##arg)
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix this CodingStyle error:

	ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so ag$
	#56: FILE: drivers/media/dvb-frontends/lgdt3306a.c:19:
	+ *    along with this program; if not, write to the Free Software$
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fixes the following smatch errors:

drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_set_if':
drivers/media/dvb-frontends/lgdt3306a.c:695:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_monitor_vsb':
drivers/media/dvb-frontends/lgdt3306a.c:1033:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_oper_mode':
drivers/media/dvb-frontends/lgdt3306a.c:1082:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_lock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1109:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_neverlock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1185:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_pre_monitoring':
drivers/media/dvb-frontends/lgdt3306a.c:1199:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_get_packet_error':
drivers/media/dvb-frontends/lgdt3306a.c:1310:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As warned by smatch:
	drivers/media/dvb-frontends/lgdt3306a.c:1354 log10_x1000() error: buffer overflow 'valx_x10' 14 <= 14
	drivers/media/dvb-frontends/lgdt3306a.c:1355 log10_x1000() error: buffer overflow 'log10x_x1000' 14 <= 14

There's a potential of returning a value out of the buffer. Fix it.

While here, remove the ugly braced block.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix two smatch warnings:
	drivers/media/dvb-frontends/lgdt3306a.h:53:28: error: dubious one-bit signed bitfield
	drivers/media/dvb-frontends/lgdt3306a.h:56:33: error: dubious one-bit signed bitfield
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Simplify the check if CONFIG_DVB_LGDT3306A is enabled, use the
IS_ENABLED() macro, just like the other frontend modules.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

While this is not a mandatory rule at the CodingStyle, we prefer
hexadecimal values in lowercase. Currently, there's a mix of lowercase
and uppercase ons at lgdt3306a. So, convert all to lowercase with this
small script:

	perl -ne 'if (m,0x([\dA-F]+),) { $o=$1; $n=lc $1; s,0x($o),0x$n, } print $_'
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Just CodingStyle. No functional changes.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

fix WARNING: 'supress' may be misspelled - perhaps 'suppress'?
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Properly indent register initialization tables.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace C99 comments by /* */ blocks.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We should not be using typedefs at the Kernel, as this makes harder
for reviewers to understand the code.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Just CodingStyle fix.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fixes CodingStyle error:
	WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

No need for an else, as the previous if will return.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

No functional changes.
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This ATSC/QAM-B demodulator is used by several new devices.

Add support for it. Other patches will fix CodingStyle issues.
Signed-off-by: NFred Richter <frichter@hauppauge.com>
Signed-off-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The documentation of the xvYCC601 Y'CbCr encoding was part of the SMPTE 170M
(SDTV) colorspace, but it should have been part of the Rec. 709 (HDTV) colorspace
as per the xvYCC standard.

This change only affects the documentation and not any code.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The handling of VIDIOC_G/S_PRIORITY is now entirely done by the V4L2
core, so we can drop the g/s_priority ioctl ops.

We do have to make sure though that when S_PRIORITY is called we check
that the driver used struct v4l2_fh. This check can be removed once all
drivers are converted to that structure.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

By using struct v4l2_fh both the prio handling and the linked list
implementation in pvrusb2 can be removed since both are now done in
the v4l2 core if you use struct v4l2_fh.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

To keep V4L2 drivers that did not yet convert to unlocked_ioctl happy,
the v4l2 core had a .ioctl file operation that took a V4L2 lock.

The last drivers are now converted to unlocked_ioctl, so all this
old code can now be removed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The V4L2 core will warn if this is not done. Unfortunately this driver
wasn't updated.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of .ioctl use unlocked_ioctl. This allows us to finally remove
the old .ioctl op.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Switch this driver over to the V4L2 core locking mechanism in preparation
for switching to unlocked_ioctl. Suggested by Laurent Pinchart.

This patch introduces a new mutex at the struct uvc_video level and
drops the old mutex at the queue level. The new lock is now used for all
ioctl locking and in the release file operation (the driver always has
to take care of locking in file operations, the core only serializes
ioctls).

Note that the mmap and get_unmapped_area file operations no longer take
a lock. Commit f035eb4e fixed a AB-BA
deadlock by moving all the locking down into vb2, so the mmap and
get_unmapped_area file operations should no longer do any locking before
calling into vb2.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver does its own locking, so there is no need to use
ioctl instead of unlocked_ioctl.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As far as I can tell pvrusb2 does its own locking, so there is
no need to use .ioctl.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It is confusing which parts of the driver are adv7604 specific, adv7611
specific or common for both. This patch renames any adv7604 prefixes (both
for functions and defines) to adv76xx whenever they are common.
Signed-off-by: NPablo Anton <pablo.anton@vodalys-labs.com>
Signed-off-by: NJean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
[hans.verkuil@cisco.com: rebased and renamed ADV76xx_fsc to ADV76XX_FSC]
[hans.verkuil@cisco.com: kept the existing adv7604 driver name]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add handling for timeout case.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

wait_for_completion_timeout() returns unsigned long not int. This assigns
the return value to an appropriately typed variable (also helps keep
static code checkers happy).
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The bits are the same, but register is 0xf4 on ADV7611 instead of 0xfc.
When reading back the value in log_status, differentiate both.
Signed-off-by: NJean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

return type of wait_for_completion_timeout is unsigned long not int. A
appropriately named variable of type unsigned long is added and the
assignments fixed up.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Integer return of bcm2048_parse_rds_rt () is never used, changing the return
type to void.
Signed-off-by: NLuis de Bethencourt <luis.bg@samsung.com>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The CP_NON_STD_VIDEO bit indicates an input not aligned with DV timings.
If there is no input, and chip is in free run mode, consider we are locked.
Signed-off-by: NJean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
[hans.verkuil@cisco.com: put both conditions in one 'if']
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>