Patrick McHardy <kaber@trash.net> noticed that it would be nice to
handle NET_XMIT_BYPASS by NET_XMIT_SUCCESS with an internal qdisc flag
__NET_XMIT_BYPASS and to remove the mapping from dev_queue_xmit().

David Miller <davem@davemloft.net> spotted a serious bug in the first
version of this patch.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patrick McHardy <kaber@trash.net> noticed:
"The other problem that affects all qdiscs supporting actions is
TC_ACT_QUEUED/TC_ACT_STOLEN getting mapped to NET_XMIT_SUCCESS
even though the packet is not queued, corrupting upper qdiscs'
qlen counters."

and later explained:
"The reason why it translates it at all seems to be to not increase
the drops counter. Within a single qdisc this could be avoided by
other means easily, upper qdiscs would still increase the counter
when we return anything besides NET_XMIT_SUCCESS though.

This means we need a new NET_XMIT return value to indicate this to
the upper qdiscs. So I'd suggest to introduce NET_XMIT_STOLEN,
return that to upper qdiscs and translate it to NET_XMIT_SUCCESS
in dev_queue_xmit, similar to NET_XMIT_BYPASS."

David Miller <davem@davemloft.net> noticed:
"Maybe these NET_XMIT_* values being passed around should be a set of
bits. They could be composed of base meanings, combined with specific
attributes.

So you could say "NET_XMIT_DROP | __NET_XMIT_NO_DROP_COUNT"

The attributes get masked out by the top-level ->enqueue() caller,
such that the base meanings are the only thing that make their
way up into the stack. If it's only about communication within the
qdisc tree, let's simply code it that way."

This patch is trying to realize these ideas.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid the overhead of atomic increment/decrement on each received packet.
This helps performance of non-NAPI devices (like loopback).
Use cleanup function to walk queue on each cpu and clean out any
left over packets.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The old code will drop IPv6 packet if ipfragok is not set, since
ipfragok is obsoleted, will be instead by used skb->local_df, so this
check must be changed to skb->local_df.

This patch fix this problem and not drop packet if skb->local_df is
set to true.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ipfragok flag controls whether the packet may be fragmented
either on the local host on beyond.  The latter is only valid on
IPv4.

In fact, we never want to do the latter even on IPv4 when PMTU is
enabled.  This is because even though we can't fragment packets
within SCTP due to the prtocol's inherent faults, we can still
fragment it at IP layer.  By setting the DF bit we will improve
the PMTU process.

RFC 2960 only says that we SHOULD clear the DF bit in this case,
so we're compliant even if we set the DF bit.  In fact RFC 4960
no longer has this statement.

Once we make this change, we only need to control the local
fragmentation.  There is already a bit in the skb which controls
that, local_df.  So this patch sets that instead of using the
ipfragok argument.

The only complication is that there isn't a struct sock object
per transport, so for IPv4 we have to resort to changing the
pmtudisc field for every packet.  This should be safe though
as the protocol is single-threaded.

Note that after this patch we can remove ipfragok from the rest
of the stack too.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When Set Hop-by-Hop options header with NULL data 
pointer and optlen is not zero use setsockopt(),
the kernel successfully return 0 instead of 
return error EINVAL or EFAULT.

This patch fix the problem.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cookie_v6_check() did not call reqsk_free() if xfrm_lookup() fails,
leaking the request sock.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 76e6ebfb ("netns: add namespace
parameter to rt_cache_flush") acceses the extra2 parameter of the
ip_default_ttl ctl_table, but it is never set to a meaningful
value. When e84f84f2 ("netns: place
rt_genid into struct net") is applied, we'll oops in
rt_cache_invalidate(). Set extra2 to init_net, to avoid that.
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NSven Wegener <sven.wegener@stealer.net>
Tested-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a netdevice does not support hardware GSO, allowing the stack to
use GSO anyway and then splitting the GSO skb into MSS-sized pieces
as it is handed to the netdevice for transmitting is likely still
a win as far as throughput and/or CPU usage are concerned, since it
reduces the number of trips through the output path.

This patch enables the use of GSO on any netdevice that supports SG.
If a GSO skb is then sent to a netdevice that supports SG but does not
support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take
care of doing the necessary GSO segmentation in software.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When pneigh entries exist, but the user's read buffer isn't sufficient to
hold them all, one of the pneigh entries will be missing from the results.

In neigh_get_idx_any, the number of elements which neigh_get_idx
encountered is not correctly subtracted from the position number before
the call to pneigh_get_idx.  neigh_get_idx reduces the position by 1 for
each call to neigh_get_next, but it does not reduce it by one for the
first element (neigh_get_first). The patch alters the neigh_get_idx and
pneigh_get_idx functions to subtract one from pos, for the first element,
when pos is non-zero.
Signed-off-by: NChris Larson <clarson@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

neigh_seq_next won't be called both with *pos > 0 && v ==
SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're
on the start token, just call neigh_get_first directly.
Signed-off-by: NChris Larson <clarson@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is the only legal environment in which this can be
used.

Add some commentary explaining the situation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qdisc_root_lock() is only %100 safe to use when the RTNL
semaphore is held.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a bug report by Jeff Kirsher.

Don't use qdisc_root_lock() in these cases as the root
qdisc could have been changed, and we'd thus lock the
wrong object.

Tested by Emil S Tantilov who confirms that this seems
to fix the problem.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rt2x00usb_vendor_request_large_buff is write-only, so it is
safe to make the argument a const.

Fixes compile warning:
drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware':
drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Move include/asm-ia64 to arch/ia64/include/asm

This fixes a bug in operator precedence in the newly introduced vc_translate
macro.  Without this fix, the translation of some characters on the
kernel console is garbled.

This patch was copied to the e-mail list previously for testing.  Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Delete 2 EXPORTs that were accidentally sent upstream.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.

This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wire up for FRV the system calls that were added in the last merge window.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wire up system calls added in the last merge window for the MN10300 arch.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.

Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.

I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Signed-off-by: NEugeniy Meshcheryakov <eugen@debian.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: s390: Fix kvm on IBM System z10
  KVM: Advertise synchronized mmu support to userspace
  KVM: Synchronize guest physical memory map to host virtual memory map
  KVM: Allow browsing memslots with mmu_lock
  KVM: Allow reading aliases with mmu_lock

* 'zero-len' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  drivers/media, include/media: delete zero-length files

Some platform decide whether they support huge pages at boot time.  On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.

The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ARCH=h8300:

init/main.c:781: undefined reference to `___early_initcall_end'

Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end

When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.

You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions.  in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them.  Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: "Mike Frysinger" <vapier.adi@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.

Also, use scnprintf() rather than snprintf() when building up the
buffer to print.  scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).

snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer.  That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.

Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
    http://marc.info/?l=linux-kernel&m=121736480005656&w=2

More useful snprintf/scnprintf discussion:
    http://lwn.net/Articles/69419/Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Reported-by: NPete Clements <clem@clem.clem-digital.net>
Cc: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some module parameters with only one line have the '\n' at the end of the
description.  This is not needed nor wanted as after the description the
type (i.e.  int) is followed by a newline.

Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: NNiels de Vos <niels.devos@wincor-nixdorf.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_it821x: Driver updates and reworking
  libata.h: replace __FUNCTION__ with __func__
  ata_piix: subsys 106b:00a3 is apple ich8m too
  libata-core: make sure that ata_force_tbl is freed in case of an error
  libata: update atapi disable handling
  pata_via: add VX800 flag; add function for fixing h/w bugs
  pata_ali: misplaced pci_dev_put()

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
  [XFS] Remove vn_revalidate calls in xfs.
  [XFS] Now that xfs_setattr is only used for attributes set from ->setattr
  [XFS] xfs_setattr currently doesn't just handle the attributes set through
  [XFS] fix use after free with external logs or real-time devices
  [XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
  [XFS] fix compilation without CONFIG_PROC_FS
  [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
  [XFS] fix mount option parsing in remount
  [XFS] Disable queue flag test in barrier check.
  [XFS] streamline init/exit path
  [XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
  [XFS] Don't assert if trying to mount with blocksize > pagesize
  [XFS] Don't update mtime on rename source
  [XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
  [XFS] Restore the lowspace extent allocator algorithm
  [XFS] use minleft when allocating in xfs_bmbt_split()
  [XFS] attrmulti cleanup
  [XFS] Check for invalid flags in xfs_attrlist_by_handle.
  [XFS] Fix CI lookup in leaf-form directories
  [XFS] Use the generic xattr methods.
  ...

iwl3945_rx_reply_rx was sending packets too early to
mac80211, before updating signal strength/quality.
This resulted in garbage power levels.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use the standard offsetof() macro to fix a compile warning below:
  CC [M]  drivers/net/wireless/prism54/isl_ioctl.o
drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element':
drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ipw_write8() can't be used alone with a loop because of a wrong definition.

  CC [M]  drivers/net/wireless/ipw2200.o
drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom':
drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds
drivers/net/wireless/ipw2200.c: In function 'ipw_load':
drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds

Add missing do {} while (0) to fix them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Some users of the RTL8187B have experienced difficulties since commit
49292d56 that introduced the power
management wext hooks. This difficulty has not made much sense until
it was realized that it was possible for mac80211 to make a call to the
config routine while that routine was already being executed. On this
device, it is necessary to loopback the TX when changing channels. Unless
this is properly restored, the device will lockup. A mutex now protects
the device state, and the private data in several places.

The problem was found by Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
who also suggested this type of fix.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Acked-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Acked-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the
released 2.6.26, my RaLink rt2500 card wouldn't associate.

Git-bisect led me to this patch:

	61486e0f
	rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()

I believe that there is a problem with that patch --- it
(inadvertantly) removes an extra line of code, that used to set the
DATABYTE_COUNT field.

This patch reinstates that line, and with it my card works again.
Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on
which the rtap functionality depends, only expose the rtap functionality
when mesh is also available.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sequence counter can be accessed in IRQ context,
which means the lock protecting the counter should
be irqsave. To prevent making the entire intf->lock irqsave
without reason, create a new lock which only protects
the sequence counter.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When the EEPROM_BBPTUNE_VGC word is valid, we should
override EEPROM_BBPTUNE_VGCLOWER field with the BBP
value.

And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

After the hardware has indicated the firmware upload has completed
and the device is ready, we should wait another millisecond to
make sure the device is really ready to continue.

Without this timout, bringing the interface down and up again will
fail due to incorrect register initialization.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>