- 05 3月, 2018 3 次提交
-
-
由 Xin Long 提交于
This patch is to move the codes for checking sinfo_flags on one asoc after this asoc has been found into sctp_sendmsg_check_sflags. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to move the codes for creating a new asoc if no asoc was found into sctp_sendmsg_new_asoc. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to move the codes for checking and sending on one asoc after this asoc has been found or created into sctp_sendmsg_to_asoc. Note that 'err != -ESRCH' check is for the case that asoc is freed when waiting for tx buffer in sctp_sendmsg_to_asoc. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2018 24 次提交
-
-
由 Eric Dumazet 提交于
Its value is computed then immediately used, there is no need to store it. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This is second part of dealing with suboptimal device gso parameters. In first patch (350c9f48 "tcp_bbr: better deal with suboptimal GSO") we dealt with devices having low gso_max_segs Some devices lower gso_max_size from 64KB to 16 KB (r8152 is an example) In order to probe an optimal cwnd, we want BBR being not sensitive to whatever GSO constraint a device can have. This patch removes tso_segs_goal() CC callback in favor of min_tso_segs() for CC wanting to override sysctl_tcp_min_tso_segs Next patch will remove bbr->tso_segs_goal since it does not have to be persistent. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Soheil Hassas Yeganeh 提交于
recvmmsg does not call ___sys_recvmsg when sk_err is set. That is fine for normal reads but, for MSG_ERRQUEUE, recvmmsg should always call ___sys_recvmsg regardless of sk->sk_err to be able to clear error queue. Otherwise, users are not able to drain the error queue using recvmmsg. Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
According to RFC 4429 (section 3.1), adding new IPv6 addresses as optimistic addresses is acceptable, as long as the implementation follows some rules: * Optimistic DAD SHOULD only be used when the implementation is aware that the address is based on a most likely unique interface identifier (such as in [RFC2464]), generated randomly [RFC3041], or by a well-distributed hash function [RFC3972] or assigned by Dynamic Host Configuration Protocol for IPv6 (DHCPv6) [RFC3315]. Optimistic DAD SHOULD NOT be used for manually entered addresses. Thus, it seems reasonable to allow userspace to set the optimistic flag when adding new addresses. We must not let userspace set NODAD + OPTIMISTIC, since if the kernel is not performing DAD we would never clear the optimistic flag. We must also ignore userspace's request to add OPTIMISTIC flag to addresses that have already completed DAD (addresses that don't have the TENTATIVE flag, or that have the DADFAILED flag). Then we also need to clear the OPTIMISTIC flag on permanent addresses when DAD fails. Otherwise, IFA_F_OPTIMISTIC addresses added by userspace can still be used after DAD has failed, because in ipv6_chk_addr_and_flags(), IFA_F_OPTIMISTIC overrides IFA_F_TENTATIVE. Setting IFA_F_OPTIMISTIC from userspace is conditional on CONFIG_IPV6_OPTIMISTIC_DAD and the optimistic_dad sysctl. Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
Fix trivial spelling mistake "greater then" -> "greater than". Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
When the processing of a DELETE LINK message has started, new connections should not be added to the link group that is about to terminate. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Add initial support for the LLC messages ADD LINK and DELETE LINK. Introduce a link state field. Extend the initial LLC handshake with ADD LINK processing. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
SMC does not support eyecatchers in RMB elements, decline peers requesting this support. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Process and respond to CONFIRM RKEY and DELETE RKEY messages. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
Add TEST LINK message responses, which also serves as preparation for support of sockopt TCP_KEEPALIVE. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
The daddr field holds the destination IPv4 address. The field was set but never used and can be removed. The addr field was a left-over from an earlier version of non-blocking connects and can be removed. The result of the call to kernel_getpeername is not used, the call can be removed. Non-blocking connects are working, so remove restriction comment. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Graul 提交于
The function smc_netinfo_by_tcpsk() belongs to CLC handling. Move it to smc_clc.c and rename to smc_clc_netinfo_by_tcpsk. Signed-off-by: NKarsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Remove structures used internal only from headers. And remove an extra function parameter. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The various MFC entries are being held in the same kind of mr_tables for both ipmr and ip6mr, and their traversal logic is identical. Also, with the exception of the addresses [and other small tidbits] the major bulk of the nla setting is identical. Unite as much of the dumping as possible between the two. Notice this requires creating an mr_table iterator for each, as the for-each preprocessor macro can't be used by the common logic. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
MFC_NOTIFY exists in ip6mr, probably as some legacy code [was already removed for ipmr in commit 06bd6c03 ("net: ipmr: remove unused MFC_NOTIFY flag and make the flags enum"). Remove it from ip6mr as well, and move the enum into a common file; Notice MFC_OFFLOAD is currently only used by ipmr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Same as previously done with the mfc seq, the logic for the vif seq is refactored to be shared between ipmr and ip6mr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
With the exception of the final dump, ipmr and ip6mr have the exact same seq logic for traversing a given mr_table. Refactor that code and make it common. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
ipmr and ip6mr utilize the exact same methods for searching the hashed resolved connections, difference being only in the construction of the hash comparison key. In order to unite the flow, introduce an mr_table operation set that would contain the protocol specific information required for common flows, in this case - the hash parameters and a comparison key representing a (*,*) route. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
mfc_cache and mfc6_cache are almost identical - the main difference is in the origin/group addresses and comparison-key. Make a common structure encapsulating most of the multicast routing logic - mr_mfc and convert both ipmr and ip6mr into using it. For easy conversion [casting, in this case] mr_mfc has to be the first field inside every multicast routing abstraction utilizing it. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Now that both ipmr and ip6mr are using the same mr_table structure, we can have a common function to allocate & initialize a new instance. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Following previous changes to ip6mr, mr_table and mr6_table are basically the same [up to mr6_table having additional '6' suffixes to its variable names]. Move the common structure definition into a common header; This requires renaming all references in ip6mr to variables that had the distinct suffix. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Since commit 8fb472c0 ("ipmr: improve hash scalability") ipmr has been using rhashtable as a basis for its mfc routes, but ip6mr is currently still using the old private MFC hash implementation. Align ip6mr to the current ipmr implementation. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
In ipmr the mr_table socket is handled under RCU. Introduce the same for ip6mr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The two implementations have almost identical structures - vif_device and mif_device. As a step toward uniforming the mr_tables, eliminate the mif_device and relocate the vif_device definition into a new common header file. Also, introduce a common initializing function for setting most of the vif_device fields in a new common source file. This requires modifying the ipv{4,6] Kconfig and ipv4 makefile as we're introducing a new common config option - CONFIG_IP_MROUTE_COMMON. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2018 9 次提交
-
-
由 Roopa Prabhu 提交于
Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations (Thanks to Nikolay Aleksandrov for some review here). Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
support to match on src port, dst port and ip protocol. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
support to match on src port, dst port and ip protocol. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
uapi for ip_proto, sport and dport range match in fib rules. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Offload sch_prio graft command for capable drivers. Warn in case of a failure, unless the graft was done as part of a destroy operation (the new qdisc is a noop) or if all the qdiscs (the parent, the old child, and the new one) are not offloaded. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Reviewed-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
When the number the bands of sch_prio is decreased, child qdiscs on the deleted bands would get deleted as well. This change and deletions are being done under sch_tree_lock of the sch_prio qdisc. Part of the destruction of qdisc is unoffloading it, if it is offloaded. Un-offloading can't be done inside this lock. Move the offload command to be done before reducing the number of bands, so unoffloading of the qdiscs that are about to be deleted could be done outside of the lock. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Reviewed-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Offloaded qdiscs are allowed to expose only parts of their statistics. It means that if backlog is being exposed and qlen is not, it might trigger a warning in qdisc_tree_reduce_backlog. Do not warn in case the qdisc that was removed was an offloaded one. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Reviewed-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Ran simple script to find/remove trailing whitespace and blank lines at EOF because that kind of stuff git whines about and editors leave behind. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2018 4 次提交
-
-
由 Petr Machata 提交于
Initializing struct flowi4 is useful for drivers that need to emulate routing decisions made by a tunnel interface. Publish the function (appropriately renamed) so that the drivers in question don't need to cut'n'paste it around. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Determining whether a device is a GRE device is easily done by inspecting struct net_device.type. However, for the tap variants, the type is just ARPHRD_ETHER. Therefore introduce two predicate functions that use netdev_ops to tell the tap devices. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
This commit is an optimization over commit 01883eda ("rds: support for zcopy completion notification") for PF_RDS sockets. RDS applications are predominantly request-response transactions, so it is more efficient to reduce the number of system calls and have zerocopy completion notification delivered as ancillary data on the POLLIN channel. Cookies are passed up as ancillary data (at level SOL_RDS) in a struct rds_zcopy_cookies when the returned value of recvmsg() is greater than, or equal to, 0. A max of RDS_MAX_ZCOOKIES may be passed with each message. This commit removes support for zerocopy completion notification on MSG_ERRQUEUE for PF_RDS sockets. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NWillem de Bruijn <willemb@google.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations only unregister nf hooks. So, they are able to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-