Similar to the previous patch, use the device lookup functions
that bump device refcount and flag this as DOIT_UNLOCKED to avoid
rtnl mutex.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of relying on rtnl mutex bump device reference count.
After this change, values reported can change in parallel, but thats not
much different from current state, as anyone can change the settings
right after rtnl_unlock (and before userspace processed reply).

While at it, switch to GFP_KERNEL allocation.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: sched: get rid of cls_flower->egress_dev

Introduction of cls_flower->egress_dev was a workaround. Turned out
to be a bit ugly hack. So replace it with more generic and reusable
infrastructure.

This is a dependency of shared block introduction that will be send as
a follow-up patchsets group.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The helper and the struct field ares no longer used by any code,
so remove them.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only user of cls_flower->egress_dev is mlx5. So do the conversion
there alongside with the code originating the call in cls_flower
function fl_hw_replace_filter to the newly introduced egress device
callback infrastucture.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce infrastructure that allows drivers to register callbacks that
are called whenever tc would offload inserted rule and specified device
acts as tc action egress device.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return dev directly, NULL if not possible. That is enough.

Makes no sense to pass struct net * to get_dev op, as there is only one
net possible, the one the action was created in. So just store it in
mirred priv and use directly.

Rename the mirred op callback function.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Rewrite some existing functionality

This series fixes some of the broken rmnet functionality.
Bridge mode is re-written and made useable and the muxed_ep is converted to hlist.

Patches 1-5 are cleanups in preparation for these changes.
Patch 6 does the hlist conversion.
Patch 7 has the implementation of the rmnet bridge mode.

v1->v2: Fix the warning and code style issue in rmnet_rx_handler as
mentioned by David.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to bridge two devices which can send multiplexing and
aggregation (MAP) data. This is done only when the data itself is
not going to be consumed in the stack but is being passed on to a
different endpoint. This is mainly used for testing.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than using a static array, use a hlist to store the muxed
endpoints and use the mux id to query the rmnet_device.
This is useful as usually very few mux ids are used.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rmnet_devices information is already stored in muxed_ep, so
storing this in rmnet_devices[] again is redundant.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The end point is set twice in the local_ep as well as the mux_id and
the real_dev in the rmnet private structure. Remove the local_ep.
While these elements are equivalent, rmnet_endpoint will be
used only as part of the rmnet_port for muxed scenarios in VND mode.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mode information on the real device makes it easier to route packets
to rmnet device or bridged device based on the configuration.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most of these constants were used in the initial patchset where
custom netlink configuration was used and hence are no longer relevant.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will be rewritten in the following patches.
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Timur Tabi says:

====================
net: qcom/emac: various minor fixes

A set of patches for 4.15 that clean up some code, apply minors fixes,
and so on.  Some of the code also prepares the driver for a future
version of the EMAC controller.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the error messages that are printed by the interrupt handlers
are poorly written.  For example, many don't include a device prefix,
so there's no indication that they are EMAC errors.

Also use rate limiting for all messages that could be printed from
interrupt context.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The EMAC has a restriction that the upper 32 bits of the base addresses
for the RFD and RRD rings must be the same.  The ensure that restriction,
we allocate twice the space for the RRD and locate it at an appropriate
address.

We also re-arrange the allocations so that invalid addresses are even
less likely.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The EMAC is capable of multiple TX and RX rings, but the driver only
supports one ring for each.  One function had some left-over unused
code that supports multiple rings, but all it did was make the code
harder to read.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 64/32-bit DMA mask hackery in the EMAC driver is not actually necessary,
and is technically not accurate.  The EMAC hardware is limted to a 45-bit
DMA address.  Although no EMAC-enabled system can have that much DDR,
an IOMMU could possible provide a larger address.  Rather than play games
with the DMA mappings, the driver should provide a correct value and
trust the DMA/IOMMU layers to do the right thing.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bjorn Andersson says:

====================
net: qrtr: Fixes and support receiving version 2 packets

On the latest Qualcomm platforms remote processors are sending packets with
version 2 of the message header. This series starts off with some fixes and
then refactors the qrtr code to support receiving messages of both version 1
and version 2.

As all remotes are backwards compatible transmitted packets continues to be
send as version 1, but some groundwork has been done to make this a per-link
property.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the necessary logic for decoding incoming messages of version 2 as
well. Also make sure there's room for the bigger of version 1 and 2
headers in the code allocating skbs for outgoing messages.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than parsing the header of incoming messages throughout the
implementation do it once when we retrieve the message and store the
relevant information in the "cb" member of the sk_buff.

This allows us to, in a later commit, decode version 2 messages into
this same structure.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the message header generation is deferred the internal functions for
generating control packets can be simplified.

This patch modifies qrtr_alloc_ctrl_packet() to, in addition to the
sk_buff, return a reference to a struct qrtr_ctrl_pkt, which clarifies
and simplifies the helpers to the point that these functions can be
folded back into the callers.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Defer writing the message header to the skb until its time to enqueue
the packet. As the receive path is reworked to decode the message header
as it's received from the transport and only pass around the payload in
the skb this change means that we do not have to fill out the full
message header just to decode it immediately in qrtr_local_enqueue().

In the future this change also makes it possible to prepend message
headers based on the version of each link.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The QMUX protocol specification defines structure of the special control
packet messages being sent between handlers of the control port.

Add these to the uapi header, as this structure and the associated types
are shared between the kernel and all userspace handlers of control
messages.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The constants are used by both the name server and clients, so clarify
their value and move them to the uapi header.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than manually waking up any context sleeping on the sock to
signal an error we should call sk_error_report(). This has the added
benefit that in-kernel consumers can override this notification with
its own callback.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:464:5: warning:
 symbol 'hns3_change_all_ring_bd_num' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:477:5: warning:
 symbol 'hns3_set_ringparam' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling setup_timer() is redundant when DEFINE_TIMER() has been used.

Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the TI  DP83822 10/100Mbit ethernet phy.

The DP83822 provides flexibility to connect to a MAC through a
standard MII, RMII or RGMII interface.

In addition the DP83822 needs to be removed from the DP83848 driver
as the WoL support is added here for this device.

Datasheet:
http://www.ti.com/product/DP83822I/datasheetSigned-off-by: NDan Murphy <dmurphy@ti.com>
Acked-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Egil Hjelmeland says:

====================
lan9303: Add basic offloading of unicast traffic

This series add basic offloading of unicast traffic to the lan9303
DSA driver.

Review welcome!

Changes v1 -> v2:
 - Patch 1: Codestyle linting.
 - Patch 2: Remember SWE_PORT_STATE while not bridged.
            Added constant LAN9303_SWE_PORT_MIRROR_DISABLED.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When both user ports are joined to the same bridge, the normal
HW MAC learning is enabled. This means that unicast traffic is forwarded
in HW.

If one of the user ports leave the bridge,
the ports goes back to the initial separated operation.

Port separation relies on disabled HW MAC learning. Hence the condition
that both ports must join same bridge.

Add brigde methods port_bridge_join, port_bridge_leave and
port_stp_state_set.
Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prepare for next patch:
Move tag setup from lan9303_separate_ports() to new function
lan9303_setup_tagging()
Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yury reported crash with this signature :

[  554.034021] [<ffff80003ccd5a58>] 0xffff80003ccd5a58
[  554.034156] [<ffff00000888fd34>] skb_release_all+0x14/0x30
[  554.034288] [<ffff00000888fd64>] __kfree_skb+0x14/0x28
[  554.034409] [<ffff0000088ece6c>] tcp_sendmsg_locked+0x4dc/0xcc8
[  554.034541] [<ffff0000088ed68c>] tcp_sendmsg+0x34/0x58
[  554.034659] [<ffff000008919fd4>] inet_sendmsg+0x2c/0xf8
[  554.034783] [<ffff0000088842e8>] sock_sendmsg+0x18/0x30
[  554.034928] [<ffff0000088861fc>] SyS_sendto+0x84/0xf8

Problem is that skb->destructor contains garbage, and this is
because I accidentally removed tcp_skb_tsorted_anchor_cleanup()
from tcp_unlink_write_queue()

This would trigger with a write(fd, <invalid_memory>, len) attempt,
and we will add to packetdrill this capability to avoid future
regressions.

Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Reported-by: NYury Norov <ynorov@caviumnetworks.com>
Tested-by: NYury Norov <ynorov@caviumnetworks.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2017-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Work continues in various areas:
 * port authorized event for 4-way-HS offload (Avi)
 * enable MFP optional for such devices (Emmanuel)
 * Kees's timer setup patch for mac80211 mesh
   (the part that isn't trivially scripted)
 * improve VLAN vs. TXQ handling (myself)
 * load regulatory database as firmware file (myself)
 * with various other small improvements and cleanups

I merged net-next once in the meantime to allow Kees's
timer setup patch to go in.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently CRDA implements the signature checking, and the previous
commits added the ability to load the whole regulatory database
into the kernel.

However, we really can't lose the signature checking, so implement
it in the kernel by loading a detached signature (regulatory.db.p7s)
and check it against built-in keys.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If the regulatory database is loaded, and then updated, it may
be necessary to reload it. Add an nl80211 command to do this.

Note that this just reloads the database, it doesn't re-apply
the rules from it immediately.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>