commit 053be4854f9bcceba99cdfa0c89acc4696852c3f upstream

As we're going to reuse some pre-allocated memory for the property
table, split out the zeroing of that table into a separate function
for later use.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit d38a71c5452529fd3326b0ae488292e5fbd8d2a1 upstream

We currently initialize the LPIs (and the ITS) fairly early, even
before the SMP support and the CPU interface. This is a bit odd
(as LPIs are not exactly crutial for the early boot process),
and is going to cause issues when reorganizing the probing code.

Let's move this initialization later.
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 5e731073bc0a4a53a213412dbd33982d829560f1 upstream

Simplify the code by removing an unnecessary wrapper function.

This was left behind by commit 2f657add
("iommu/arm-smmu-v3: Specialise CMD_SYNC handling")
Signed-off-by: NAndrew Murray <andrew.murray@arm.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 44f6876a00e83df5fd28681502b19b0f51e4a3c6 upstream

All we need is to wire up .flush_iotlb_all properly and implement the
domain attribute, and iommu-dma and io-pgtable will do the rest for us.
The only real subtlety is documenting the barrier semantics we're
introducing between io-pgtable and the drivers for non-strict flushes.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit b2dfeba654cb08db327d0ed4547b66c2f8fce997 upstream

As for LPAE, it's simply a case of skipping the leaf invalidation for a
regular unmap, and ensuring that the one in split_blk_unmap() is paired
with an explicit sync ASAP rather than relying on one which might only
eventually happen way down the line.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 9662b99a19abccb0b7bfc91abb3fec1447c35bf0 upstream

Now that io-pgtable knows how to dodge strict TLB maintenance, all
that's left to do is bridge the gap between the IOMMU core requesting
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE for default domains, and showing the
appropriate IO_PGTABLE_QUIRK_NON_STRICT flag to alloc_io_pgtable_ops().
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak commit message]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit b6b65ca20bc93d14319f9b5cf98fd3c19a4244e3 upstream

Non-strict mode is simply a case of skipping 'regular' leaf TLBIs, since
the sync is already factored out into ops->iotlb_sync at the core API
level. Non-leaf invalidations where we change the page table structure
itself still have to be issued synchronously in order to maintain walk
caches correctly.

To save having to reason about it too much, make sure the invalidation
in arm_lpae_split_blk_unmap() just performs its own unconditional sync
to minimise the window in which we're technically violating the break-
before-make requirement on a live mapping. This might work out redundant
with an outer-level sync for strict unmaps, but we'll never be splitting
blocks on a DMA fastpath anyway.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[rm: tweak comment, commit message, split_blk_unmap logic and barriers]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 68a6efe86f6a16e25556a2aff40efad41097b486 upstream

Add a generic command line option to enable lazy unmapping via IOVA
flush queues, which will initally be suuported by iommu-dma. This echoes
the semantics of "intel_iommu=strict" (albeit with the opposite default
value), but in the driver-agnostic fashion of "iommu.passthrough".
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[rm: move handling out of SMMUv3 driver, clean up documentation]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
[will: dropped broken printk when parsing command-line option]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 2da274cdf998a1c12afa6b5975db2df1df01edf1 upstream

With the flush queue infrastructure already abstracted into IOVA
domains, hooking it up in iommu-dma is pretty simple. Since there is a
degree of dependency on the IOMMU driver knowing what to do to play
along, we key the whole thing off a domain attribute which will be set
on default DMA ops domains to request non-strict invalidation. That way,
drivers can indicate the appropriate support by acknowledging the
attribute, and we can easily fall back to strict invalidation otherwise.

The flush queue callback needs a handle on the iommu_domain which owns
our cookie, so we have to add a pointer back to that, but neatly, that's
also sufficient to indicate whether we're using a flush queue or not,
and thus which way to release IOVAs. The only slight subtlety is
switching __iommu_dma_unmap() from calling iommu_unmap() to explicit
iommu_unmap_fast()/iommu_tlb_sync() so that we can elide the sync
entirely in non-strict mode.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak comments and commit message]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 07fdef34d2be6811f00c6f9e4e2a1483cf86696c upstream

.flush_iotlb_all is currently stubbed to arm_smmu_iotlb_sync() since the
only time it would ever need to actually do anything is for callers
doing their own explicit batching, e.g.:

	iommu_unmap_fast(domain, ...);
	iommu_unmap_fast(domain, ...);
	iommu_iotlb_flush_all(domain, ...);

where since io-pgtable still issues the TLBI commands implicitly in the
unmap instead of implementing .iotlb_range_add, the "flush" only needs
to ensure completion of those already-in-flight invalidations.

However, we're about to start using it in anger with flush queues, so
let's get a proper implementation wired up.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
[rm: document why it wasn't a bug]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 901510ee32f7190902f6fe4affb463e5d86a804c upstream

Putting adjacent CMD_SYNCs into the command queue is nonsensical, but
can happen when multiple CPUs are inserting commands. Rather than leave
the poor old hardware to chew through these operations, we can instead
drop the subsequent SYNCs and poll for completion of the first. This
has been shown to improve IO performance under pressure, where the
number of SYNC operations reduces by about a third:

	CMD_SYNCs reduced:	19542181
	CMD_SYNCs total:	58098548	(include reduced)
	CMDs total:		116197099	(TLBI:SYNC about 1:1)
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 0f02477d16980938a84aba8688a4e3a303306116 upstream

The condition break condition of:

	(int)(VAL - sync_idx) >= 0

in the __arm_smmu_sync_poll_msi() polling loop requires that sync_idx
must be increased monotonically according to the sequence of the CMDs in
the cmdq.

However, since the msidata is populated using atomic_inc_return_relaxed()
before taking the command-queue spinlock, then the following scenario
can occur:

CPU0			CPU1
msidata=0
			msidata=1
			insert cmd1
insert cmd0
			smmu execute cmd1
smmu execute cmd0
			poll timeout, because msidata=1 is overridden by
			cmd0, that means VAL=0, sync_idx=1.

This is not a functional problem, since the caller will eventually either
timeout or exit due to another CMD_SYNC, however it's clearly not what
the code is supposed to be doing. Fix it, by incrementing the sequence
count with the command-queue lock held, allowing us to drop the atomic
operations altogether.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
[will: dropped the specialised cmd building routine for now]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 85c7a0f1ef624ef58173ef52ea77780257bdfe04 upstream

In removing the pagetable-wide lock, we gained the possibility of the
vanishingly unlikely case where we have a race between two concurrent
unmappers splitting the same block entry. The logic to handle this is
fairly straightforward - whoever loses the race frees their partial
next-level table and instead dereferences the winner's newly-installed
entry in order to fall back to a regular unmap, which intentionally
echoes the pre-existing case of recursively splitting a 1GB block down
to 4KB pages by installing a full table of 2MB blocks first.

Unfortunately, the chump who implemented that logic failed to update the
condition check for that fallback, meaning that if said race occurs at
the last level (where the loser's unmap_idx is valid) then the unmap
won't actually happen. Fix that to properly account for both the race
and recursive cases.

Fixes: 2c3d273e ("iommu/io-pgtable-arm: Support lockless operation")
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
[will: re-jig control flow to avoid duplicate cmpxchg test]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 657135f3108122556c3cf60a78c6f0e76aeb60e6 commit

Fix some comment typos spotted.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 4adcdcea717cb2d8436bef00dd689aa5bc76f11b upstream.

When passing a equal or more then 32 bytes long string to psi_write(),
psi_write() copies 31 bytes to its buf and overwrites buf[30]
with '\0'. Which makes the input string 1 byte shorter than
it should be.

Fix it by copying sizeof(buf) bytes when nbytes >= sizeof(buf).

This does not cause problems in normal use case like:
"some 500000 10000000" or "full 500000 10000000" because they
are less than 32 bytes in length.

	/* assuming nbytes == 35 */
	char buf[32];

	buf_size = min(nbytes, (sizeof(buf) - 1)); /* buf_size = 31 */
	if (copy_from_user(buf, user_buf, buf_size))
		return -EFAULT;

	buf[buf_size - 1] = '\0'; /* buf[30] = '\0' */

Before:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [   22.473497] nbytes=35,buf_size=31
 [   22.473775] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [   64.916162] nbytes=32,buf_size=31
 [   64.916331] 123456789|123456789|123456789| (print 30 chars)
 %sh: write error: Invalid argument

After:

 %cd /proc/pressure/
 %echo "123456789|123456789|123456789|1234" > memory
 [  254.837863] nbytes=35,buf_size=32
 [  254.838541] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

 %echo "123456789|123456789|123456789|1" > memory
 [ 9965.714935] nbytes=32,buf_size=32
 [ 9965.715096] 123456789|123456789|123456789|1 (print 31 chars)
 %sh: write error: Invalid argument

Also remove the superfluous parentheses.
Signed-off-by: NMiles Chen <miles.chen@mediatek.com>
Cc: <linux-mediatek@lists.infradead.org>
Cc: <wsd_upstream@mediatek.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190912103452.13281-1-miles.chen@mediatek.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 04e048cf09d7b5fc995817cdc5ae1acd4482429c upstream.

When a process creates a new trigger by writing into /proc/pressure/*
files, permissions to write such a file should be used to determine whether
the process is allowed to do so or not. Current implementation would also
require such a process to have setsched capability. Setting of psi trigger
thread's scheduling policy is an implementation detail and should not be
exposed to the user level. Remove the permission check by using _nocheck
version of the function.
Suggested-by: NNick Kralevich <nnk@google.com>
Signed-off-by: NSuren Baghdasaryan <surenb@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: lizefan@huawei.com
Cc: mingo@redhat.com
Cc: akpm@linux-foundation.org
Cc: kernel-team@android.com
Cc: dennisszhou@gmail.com
Cc: dennis@kernel.org
Cc: hannes@cmpxchg.org
Cc: axboe@kernel.dk
Link: https://lkml.kernel.org/r/20190730013310.162367-1-surenb@google.comSigned-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 14f5c7b46a41a595fc61db37f55721714729e59e upstream.

PSI defaults to a FIFO-99 thread, reduce this to FIFO-1.

FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the psi work is the
most important work on the machine.

Since Real-Time tasks will have pre-allocated memory and locked it in
place, Real-Time tasks do not care about PSI. All it needs is to be
above OTHER.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Tested-by: NSuren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit fd112c74652371a023f85d87b70bee7169e8f4d0 upstream.

With the psi stuff in place we can use the memstall flag to indicate
pressure that happens from throttling.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d2fcd82bb83aab47c6d63aa8c960cd5edb578065 upstream

This is the third version that was updated according to the comments from
Sergey Senozhatsky https://lkml.org/lkml/2019/5/29/73 and Shakeel Butt
https://lkml.org/lkml/2019/6/4/973

zswap compresses swap pages into a dynamically allocated RAM-based memory
pool.  The memory pool should be zbud, z3fold or zsmalloc.  All of them
will allocate unmovable pages.  It will increase the number of unmovable
page blocks that will bad for anti-fragment.

zsmalloc support page migration if request movable page:
        handle = zs_malloc(zram->mem_pool, comp_len,
                GFP_NOIO | __GFP_HIGHMEM |
                __GFP_MOVABLE);

And commit "zpool: Add malloc_support_movable to zpool_driver" add
zpool_malloc_support_movable check malloc_support_movable to make sure if
a zpool support allocate movable memory.

This commit let zswap allocate block with gfp
__GFP_HIGHMEM | __GFP_MOVABLE if zpool support allocate movable memory.

Following part is test log in a pc that has 8G memory and 2G swap.

Without this commit:
~# echo lz4 > /sys/module/zswap/parameters/compressor
~# echo zsmalloc > /sys/module/zswap/parameters/zpool
~# echo 1 > /sys/module/zswap/parameters/enabled
~# swapon /swapfile
~# cd /home/teawater/kernel/vm-scalability/
/home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
/home/teawater/kernel/vm-scalability# ./case-anon-w-seq
2717908992 bytes / 4826062 usecs = 549973 KB/s
2717908992 bytes / 4864201 usecs = 545661 KB/s
2717908992 bytes / 4867015 usecs = 545346 KB/s
2717908992 bytes / 4915485 usecs = 539968 KB/s
397853 usecs to free memory
357820 usecs to free memory
421333 usecs to free memory
420454 usecs to free memory
/home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10
Node    0, zone      DMA, type    Unmovable      1      1      1      0      2      1      1      0      1      0      0
Node    0, zone      DMA, type      Movable      0      0      0      0      0      0      0      0      0      1      3
Node    0, zone      DMA, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type    Unmovable      6      5      8      6      6      5      4      1      1      1      0
Node    0, zone    DMA32, type      Movable     25     20     20     19     22     15     14     11     11      5    767
Node    0, zone    DMA32, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type    Unmovable   4753   5588   5159   4613   3712   2520   1448    594    188     11      0
Node    0, zone   Normal, type      Movable     16      3    457   2648   2143   1435    860    459    223    224    296
Node    0, zone   Normal, type  Reclaimable      0      0     44     38     11      2      0      0      0      0      0
Node    0, zone   Normal, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type      Isolate      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type     Unmovable      Movable  Reclaimable   HighAtomic          CMA      Isolate
Node 0, zone      DMA            1            7            0            0            0            0
Node 0, zone    DMA32            4         1652            0            0            0            0
Node 0, zone   Normal          931         1485           15            0            0            0

With this commit:
~# echo lz4 > /sys/module/zswap/parameters/compressor
~# echo zsmalloc > /sys/module/zswap/parameters/zpool
~# echo 1 > /sys/module/zswap/parameters/enabled
~# swapon /swapfile
~# cd /home/teawater/kernel/vm-scalability/
/home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
/home/teawater/kernel/vm-scalability# ./case-anon-w-seq
2717908992 bytes / 4689240 usecs = 566020 KB/s
2717908992 bytes / 4760605 usecs = 557535 KB/s
2717908992 bytes / 4803621 usecs = 552543 KB/s
2717908992 bytes / 5069828 usecs = 523530 KB/s
431546 usecs to free memory
383397 usecs to free memory
456454 usecs to free memory
224487 usecs to free memory
/home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10
Node    0, zone      DMA, type    Unmovable      1      1      1      0      2      1      1      0      1      0      0
Node    0, zone      DMA, type      Movable      0      0      0      0      0      0      0      0      0      1      3
Node    0, zone      DMA, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone      DMA, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type    Unmovable     10      8     10      9     10      4      3      2      3      0      0
Node    0, zone    DMA32, type      Movable     18     12     14     16     16     11      9      5      5      6    775
Node    0, zone    DMA32, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      1
Node    0, zone    DMA32, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone    DMA32, type      Isolate      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type    Unmovable   2669   1236    452    118     37     14      4      1      2      3      0
Node    0, zone   Normal, type      Movable   3850   6086   5274   4327   3510   2494   1520    934    438    220    470
Node    0, zone   Normal, type  Reclaimable     56     93    155    124     47     31     17      7      3      0      0
Node    0, zone   Normal, type   HighAtomic      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type          CMA      0      0      0      0      0      0      0      0      0      0      0
Node    0, zone   Normal, type      Isolate      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type     Unmovable      Movable  Reclaimable   HighAtomic          CMA      Isolate
Node 0, zone      DMA            1            7            0            0            0            0
Node 0, zone    DMA32            4         1650            2            0            0            0
Node 0, zone   Normal           79         2326           26            0            0            0

You can see that the number of unmovable page blocks is decreased
when the kernel has this commit.

Link: http://lkml.kernel.org/r/20190605100630.13293-2-teawaterz@linux.alibaba.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit c165f25d23ecb2f9f121ced20435415b931219e2 upstream

As a zpool_driver, zsmalloc can allocate movable memory because it support
migate pages.  But zbud and z3fold cannot allocate movable memory.

Add malloc_support_movable to zpool_driver.  If a zpool_driver support
allocate movable memory, set it to true.  And add
zpool_malloc_support_movable check malloc_support_movable to make sure if
a zpool support allocate movable memory.

Link: http://lkml.kernel.org/r/20190605100630.13293-1-teawaterz@linux.alibaba.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 425aa0e1d01513437668fa3d4a971168bbaa8515 upstream.

In function ip_ra_control(), the pointer new_ra is allocated a memory
space via kmalloc(). And it is used in the following codes. However,
when  there is a memory allocation error, kmalloc() fails. Thus null
pointer dereference may happen. And it will cause the kernel to crash.
Therefore, we should check the return value and handle the error.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 4e78921ba4dd0aca1cc89168f45039add4183f8e upstream.

The old_memmap flow in efi_call_phys_prolog() performs numerous memory
allocations, and either does not check for failure at all, or it does
but fails to propagate it back to the caller, which may end up calling
into the firmware with an incomplete 1:1 mapping.

So let's fix this by returning NULL from efi_call_phys_prolog() on
memory allocation failures only, and by handling this condition in the
caller. Also, clean up any half baked sets of page tables that we may
have created before returning with a NULL return value.

Note that any failure at this level will trigger a panic() two levels
up, so none of this makes a huge difference, but it is a nice cleanup
nonetheless.

[ardb: update commit log, add efi_call_phys_epilog() call on error path]
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Bradford <robert.bradford@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190525112559.7917-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 95baa60a0da80a0143e3ddd4d3725758b4513825 upstream.

In function ip6_ra_control(), the pointer new_ra is allocated a memory
space via kmalloc(). And it is used in the following codes. However,
when there is a memory allocation error, kmalloc() fails. Thus null
pointer dereference may happen. And it will cause the kernel to crash.
Therefore, we should check the return value and handle the error.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit f9e3ebeea4521652318af903cddeaf033527e93e upstream.

In _ctl_ioctl_main(), 'ioctl_header' is fetched the first time from
userspace. 'ioctl_header.ioc_number' is then checked. The legal result is
saved to 'ioc'. Then, in condition MPT3COMMAND, the whole struct is fetched
again from the userspace. Then _ctl_do_mpt_command() is called, 'ioc' and
'karg' as inputs.

However, a malicious user can change the 'ioc_number' between the two
fetches, which will cause a potential security issues.  Moreover, a
malicious user can provide a valid 'ioc_number' to pass the check in first
fetch, and then modify it in the second fetch.

To fix this, we need to recheck the 'ioc_number' in the second fetch.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Acked-by: NSuganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit fcdf445ff42f036d22178b49cf64e92d527c1330 upstream.

In sunxi_divs_clk_setup(), 'derived_name' is allocated by kstrndup().
It returns NULL when fails. 'derived_name' should be checked.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit efa9ace68e487ddd29c2b4d6dd23242158f1f607 upstream.

In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup().
kstrdup() may return NULL, so it should be checked and handle error.
And prop should be freed if 'prop->name' is NULL.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit f74dc880098b4a29f76d756b888fb31d81ad9a0c upstream.
Suggested-by: NTim Pepper <timothy.c.pepper@linux.intel.com>
Signed-off-by: NMiguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Acked-by: NSasha Neftin <sasha.neftin@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit ab6973aed6200510662856afce5e3d1e386b7b64 upstream.

The e1000e driver is a great user of the usleep_range() API,
and has any nice ranges that in principle help power management.

However the ranges that are used only during system startup are
very long (and can add easily 100 msec to the boot time) while
the power savings of such long ranges is irrelevant due to the
one-off, boot only, nature of these functions.

This patch shrinks some of the longest ranges to be shorter
(while still using a power friendly 1 msec range); this saves
100msec+ of boot time on my BDW NUCs
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Only when calling the poll syscall the first time can user
receive POLLPRI correctly. After that, user always fails to
acquire the event signal.

Reproduce case:
1. Get the monitor code in Documentation/accounting/psi.txt
2. Run it, and wait for the event triggered.
3. Kill and restart the process.

The question is why we can end up with poll_scheduled = 1 but the work
not running (which would reset it to 0). And the answer is because the
scheduling side sees group->poll_kworker under RCU protection and then
schedules it, but here we cancel the work and destroy the worker. The
cancel needs to pair with resetting the poll_scheduled flag.
Signed-off-by: NJason Xing <kerneljasonxing@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: NSuren Baghdasaryan <surenb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7bd75230b43727b258a4f7a59d62114cffe1b6c8 upstream.

Ext4 may not free clusters correctly when punching holes in bigalloc
file systems under high load conditions.  If it's not possible to
extend and restart the journal in ext4_ext_rm_leaf() when preparing to
remove blocks from a punched region, a retry of the entire punch
operation is triggered in ext4_ext_remove_space().  This causes a
partial cluster to be set to the first cluster in the extent found to
the right of the punched region.  However, if the punch operation
prior to the retry had made enough progress to delete one or more
extents and a partial cluster candidate for freeing had already been
recorded, the retry would overwrite the partial cluster.  The loss of
this information makes it impossible to correctly free the original
partial cluster in all cases.

This bug can cause generic/476 to fail when run as part of
xfstests-bld's bigalloc and bigalloc_1k test cases.  The failure is
reported when e2fsck detects bad iblocks counts greater than expected
in units of whole clusters and also detects a number of negative block
bitmap differences equal to the iblocks discrepancy in cluster units.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 799578ab16e86b074c184ec5abbda0bc698c7b0b upstream.

Enabling DX_DEBUG triggers the build error below.  info is an attribute
of  the dxroot structure.

linux/fs/ext4/namei.c:2264:12: error: ‘info’
undeclared (first use in this function); did you mean ‘insl’?
	   	  info->indirect_levels));

Fixes: e08ac99f ("ext4: add largedir feature")
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 64081362e8ff4587b4554087f3cfc73d3e0a4cd7 upstream.

We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.

range_cyclic
writeback		Process 1		Process 2

xfs_vm_writepages
  write_cache_pages
    writeback_index = 2
    cycled = 0
    ....
    find page 2 dirty
    lock Page 2
    ->writepage
      page 2 writeback
      page 2 clean
      page 2 added to bio
    no more pages
			write()
			locks page 1
			dirties page 1
			locks page 2
			dirties page 1
			fsync()
			....
			xfs_vm_writepages
			write_cache_pages
			  start index 0
			  find page 1 towrite
			  lock Page 1
			  ->writepage
			    page 1 writeback
			    page 1 clean
			    page 1 added to bio
			  find page 2 towrite
			  lock Page 2
			  page 2 is writeback
			  <blocks>
						write()
						locks page 1
						dirties page 1
						fsync()
						....
						xfs_vm_writepages
						write_cache_pages
						  start index 0

    !done && !cycled
      sets index to 0, restarts lookup
    find page 1 dirty
						  find page 1 towrite
						  lock Page 1
						  page 1 is writeback
						  <blocks>

    lock Page 1
    <blocks>

DEADLOCK because:

	- process 1 needs page 2 writeback to complete to make
	  enough progress to issue IO pending for page 1
	- writeback needs page 1 writeback to complete so process 2
	  can progress and unlock the page it is blocked on, then it
	  can issue the IO pending for page 2
	- process 2 can't make progress until process 1 issues IO
	  for page 1

The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages().  The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.

generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.

However:
	mpage_writepages() has a private bio context,
	exofs_writepages() has page_collect
	fuse_writepages() has fuse_fill_wb_data
	nfs_writepages() has nfs_pageio_descriptor
	xfs_vm_writepages() has xfs_writepage_ctx

All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.

Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock.  I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much.  I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.

There's a few ways I can see avoid this deadlock.  There's probably more,
but these are the first I've though of:

1. get rid of range_cyclic altogether

2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()

2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation

3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer

3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.

I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.

performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.

retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.

inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.

band-aid fix of #3.

So it seems that the simplest way to fix this issue is to implement
solution #2

Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.comSigned-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NJan Kara <jack@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 2a5cf35cd6c56b2924bce103413ad3381bdc31fa upstream.

There are actually two kinds of discard merge:

- one is the normal discard merge, just like normal read/write request,
and call it single-range discard

- another is the multi-range discard, queue_max_discard_segments(rq->q) > 1

For the former case, queue_max_discard_segments(rq->q) is 1, and we
should handle this kind of discard merge like the normal read/write
request.

This patch fixes the following kernel panic issue[1], which is caused by
not removing the single-range discard request from elevator queue.

Guangwu has one raid discard test case, in which this issue is a bit
easier to trigger, and I verified that this patch can fix the kernel
panic issue in Guangwu's test case.

[1] kernel panic log from Jens's report

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
 PGD 0 P4D 0.
 Oops: 0000 [#1] SMP PTI
 CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \
4.20.0-rc3-00649-ge64d9a554a91-dirty #14  Hardware name: Wiwynn \
Leopard-Orv2/Leopard-DDR BW, BIOS LBM08   03/03/2017       Workqueue: kblockd \
blk_mq_run_work_fn                                            RIP: \
0010:blk_mq_get_driver_tag+0x81/0x120                                       Code: 24 \
10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \
0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \
f6 87 b0 00 00 00 02  RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246                     \
  RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8
 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000
 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300
 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000
 FS:  0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  blk_mq_dispatch_rq_list+0xec/0x480
  ? elv_rb_del+0x11/0x30
  blk_mq_do_dispatch_sched+0x6e/0xf0
  blk_mq_sched_dispatch_requests+0xfa/0x170
  __blk_mq_run_hw_queue+0x5f/0xe0
  process_one_work+0x154/0x350
  worker_thread+0x46/0x3c0
  kthread+0xf5/0x130
  ? process_one_work+0x350/0x350
  ? kthread_destroy_worker+0x50/0x50
  ret_from_fork+0x1f/0x30
 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \
kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \
cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \
button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \
nvme_core fuse sg loop efivarfs autofs4  CR2: 0000000000000148                        \

 ---[ end trace 340a1fb996df1b9b ]---
 RIP: 0010:blk_mq_get_driver_tag+0x81/0x120
 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \
00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \
20 72 37 f6 87 b0 00 00 00 02

Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached")
Reported-by: NJens Axboe <axboe@kernel.dk>
Cc: Guangwu Zhang <guazhang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 upstream.

Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.

Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 69840466086d2248898020a08dda52732686c4e6 upstream.

There are two cases when handle DISCARD merge.
If max_discard_segments == 1, the bios/requests need to be contiguous
to merge. If max_discard_segments > 1, it takes every bio as a range
and different range needn't to be contiguous.

But now, attempt_merge screws this up. It always consider contiguity
for DISCARD for the case max_discard_segments > 1 and cannot merge
contiguous DISCARD for the case max_discard_segments == 1, because
rq_attempt_discard_merge always returns false in this case.
This patch fixes both of the two cases above.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 74694bcbdf7e28a5ad548cdda9ac56d30be00d13 upstream.

Sending a check/repair message infrequently leads to -EBUSY instead of
properly identifying an active resync.  This occurs because
raid_message() is testing recovery bits in a racy way.

Fix by calling decipher_sync_action() from raid_message() to properly
identify the idle state of the RAID device.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 37fd1678245f7a5898c1b05128bc481fb403c290 upstream.

When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d
("xfs: use sync buffer I/O for sync delwri queue submission").

Despite this, I think there is still an issue with xfs_buf_rele()
in this code:

        release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
        spin_lock(&bp->b_lock);
        if (!release) {
.....

If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:

CPU 0				CPU 1
atomic_dec_and_lock()
				atomic_dec_and_lock()
				spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
				<release = true bp->b_lru_ref = 0>
				<remove from lists>
				freebuf = true
				spin_unlock(&bp->b_lock)
				xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>

IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.

It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 6e693b3ffecb0b478c7050b44a4842854154f715 upstream.

Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
makes the access_ok() check part of the user_access_begin() preceding a
series of 'unsafe' accesses.  This has the desirable effect of ensuring
that all 'unsafe' accesses have been range-checked, without having to
pick through all of the callsites to verify whether the appropriate
checking has been made.

However, the consolidated range check does not inhibit speculation, so
it is still up to the caller to ensure that they are not susceptible to
any speculative side-channel attacks for user addresses that ultimately
fail the access_ok() check.

This is an oversight, so use __uaccess_begin_nospec() to ensure that
speculation is inhibited until the access_ok() check has passed.
Reported-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 594cc251fdd0d231d342d88b2fdff4bc42fb0690 upstream.

Originally, the rule used to be that you'd have to do access_ok()
separately, and then user_access_begin() before actually doing the
direct (optimized) user access.

But experience has shown that people then decide not to do access_ok()
at all, and instead rely on it being implied by other operations or
similar.  Which makes it very hard to verify that the access has
actually been range-checked.

If you use the unsafe direct user accesses, hardware features (either
SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged
Access Never - on ARM) do force you to use user_access_begin().  But
nothing really forces the range check.

By putting the range check into user_access_begin(), we actually force
people to do the right thing (tm), and the range check vill be visible
near the actual accesses.  We have way too long a history of people
trying to avoid them.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[ Shile: fix following conflicts by adding a dummy arguments ]
Conflicts:
	kernel/compat.c
	kernel/exit.c
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>

commit 0b2c8f8b6b0c7530e2866c95862546d0da2057b0 upstream.

When commit fddcd00a49e9 ("drm/i915: Force the slow path after a
user-write error") unified the error handling for various user access
problems, it didn't do the user_access_end() that is needed for the
unsafe_put_user() case.

It's not a huge deal: a missed user_access_end() will only mean that
SMAP protection isn't active afterwards, and for the error case we'll be
returning to user mode soon enough anyway.  But it's wrong, and adding
the proper user_access_end() is trivial enough (and doing it for the
other error cases where it isn't needed doesn't hurt).

I noticed it while doing the same prep-work for changing
user_access_begin() that precipitated the access_ok() changes in commit
96d4f267e40f ("Remove 'type' argument from access_ok() function").

Fixes: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@kernel.org # v4.20
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>