mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (57 commits)
  tidy the trailing symlinks traversal up
  Turn resolution of trailing symlinks iterative everywhere
  simplify link_path_walk() tail
  Make trailing symlink resolution in path_lookupat() iterative
  update nd->inode in __do_follow_link() instead of after do_follow_link()
  pull handling of one pathname component into a helper
  fs: allow AT_EMPTY_PATH in linkat(), limit that to CAP_DAC_READ_SEARCH
  Allow passing O_PATH descriptors via SCM_RIGHTS datagrams
  readlinkat(), fchownat() and fstatat() with empty relative pathnames
  Allow O_PATH for symlinks
  New kind of open files - "location only".
  ext4: Copy fs UUID to superblock
  ext3: Copy fs UUID to superblock.
  vfs: Export file system uuid via /proc/<pid>/mountinfo
  unistd.h: Add new syscalls numbers to asm-generic
  x86: Add new syscalls for x86_64
  x86: Add new syscalls for x86_32
  fs: Remove i_nlink check from file system link callback
  fs: Don't allow to create hardlink for deleted file
  vfs: Add open by file handle support
  ...

The new vfs locking scheme introduced in 2.6.38 breaks NFS sillyrename
because the latter relies on being able to determine the parent
directory of the dentry in the ->iput() callback in order to send the
appropriate unlink rpc call.

Looking at the code that cares about races with dput(), there doesn't
seem to be anything that specifically uses d_parent as a test for
whether or not there is a race:
  - __d_lookup_rcu(), __d_lookup() all test for d_hashed() after d_parent
  - shrink_dcache_for_umount() is safe since nothing else can rearrange
    the dentries in that super block.
  - have_submount(), select_parent() and d_genocide() can test for a
    deletion if we set the DCACHE_DISCONNECTED flag when the dentry
    is removed from the parent's d_subdirs list.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org (2.6.38, needs commit c826cb7d "dcache.c:
	create helper function for duplicated functionality" )
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This creates a helper function for he "try to ascend into the parent
directory" case, which was written out in triplicate before.  With all
the locking and subtle sequence number stuff, we really don't want to
duplicate that kind of code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* pull the handling of current->total_link_count into
__do_follow_link()
* put the common "do ->put_link() if needed and path_put() the link"
  stuff into a helper (put_link(nd, link, cookie))
* rename __do_follow_link() to follow_link(), while we are at it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The last remaining place (resolution of nested symlink) converted
to the loop of the same kind we have in path_lookupat() and
path_openat().

Note that we still *do* have a recursion in pathname resolution;
can't avoid it, really.  However, it's strictly for nested symlinks
now - i.e. ones in the middle of a pathname.

link_path_walk() has lost the tail now - it always walks everything
except the last component.

do_follow_link() renamed to nested_symlink() and moved down.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that link_path_walk() is called without LOOKUP_PARENT
only from do_follow_link(), we can simplify the checks in
last component handling.  First of all, checking if we'd
arrived to a directory is not needed - the caller will check
it anyway.  And LOOKUP_FOLLOW is guaranteed to be there,
since we only get to that place with nd->depth > 0.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now the only caller of link_path_walk() that does *not* pass
LOOKUP_PARENT is do_follow_link()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and note that we only need to do it for LAST_BIND symlinks
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helper: walk_component().  Handles everything except symlinks;
returns negative on error, 0 on success and 1 on symlinks we decided
to follow.  Drops out of RCU mode on such symlinks.

link_path_walk() and do_last() switched to using that.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We don't want to allow creation of private hardlinks by different application
using the fd passed to them via SCM_RIGHTS. So limit the null relative name
usage in linkat syscall to CAP_DAC_READ_SEARCH
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: suspend: remove xen_hvm_suspend
  xen: suspend: pull pre/post suspend hooks out into suspend_info
  xen: suspend: move arch specific pre/post suspend hooks into generic hooks
  xen: suspend: refactor non-arch specific pre/post suspend hooks
  xen: suspend: add "arch" to pre/post suspend hooks
  xen: suspend: pass extra hypercall argument via suspend_info struct
  xen: suspend: refactor cancellation flag into a structure
  xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open coding
  xen: switch to new schedop hypercall by default.
  xen: use new schedop interface for suspend
  xen: do not respond to unknown xenstore control requests
  xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
  xen: PV on HVM: support PV spinlocks and IPIs
  xen: make the ballon driver work for hvm domains
  xen-blkfront: handle Xen major numbers other than XENVBD
  xen: do not use xen_info on HVM, set pv_info name to "Xen HVM"
  xen: no need to delay xen_setup_shutdown_event for hvm guests anymore

Merge branches 'stable/ia64', 'stable/blkfront-cleanup' and 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/ia64' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: ia64 build broken due to "xen: switch to new schedop hypercall by default."

* 'stable/blkfront-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Union the blkif_request request specific fields

* 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: annotate functions which only call into __init at start of day
  xen p2m: annotate variable which appears unused
  xen: events: mark cpu_evtchn_mask_p as __refdata

* 'stable/irq.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: events: remove dom0 specific xen_create_msi_irq
  xen: events: use xen_bind_pirq_msi_to_irq from xen_create_msi_irq
  xen: events: push set_irq_msi down into xen_create_msi_irq
  xen: events: update pirq_to_irq in xen_create_msi_irq
  xen: events: refactor xen_create_msi_irq slightly
  xen: events: separate MSI PIRQ allocation from PIRQ binding to IRQ
  xen: events: assume PHYSDEVOP_get_free_pirq exists
  xen: pci: collapse apic_register_gsi_xen_hvm and xen_hvm_register_pirq
  xen: events: return irq from xen_allocate_pirq_msi
  xen: events: drop XEN_ALLOC_IRQ flag to xen_allocate_pirq_msi
  xen: events: do not leak IRQ from xen_allocate_pirq_msi when no pirq available.
  xen: pci: only define xen_initdom_setup_msi_irqs if CONFIG_XEN_DOM0

Merge branches 'stable/irq.rework' and 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/irq.rework' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
  xen: Use IRQF_FORCE_RESUME
  xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
  xen: Fix compile error introduced by "switch to new irq_chip functions"
  xen: Switch to new irq_chip functions
  xen: Remove stale irq_chip.end
  xen: events: do not free legacy IRQs
  xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
  xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
  xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
  xen: handled remapped IRQs when enabling a pcifront PCI device.
  genirq: Add IRQF_FORCE_RESUME

* 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code.
  pci/xen: Cleanup: convert int** to int[]
  pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq
  xen-pcifront: Sanity check the MSI/MSI-X values
  xen-pcifront: don't use flush_scheduled_work()

Merge branches 'stable/p2m-identity.v4.9.1' and 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/p2m-identity.v4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set..
  xen/m2p: No need to catch exceptions when we know that there is no RAM
  xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
  xen/debugfs: Add 'p2m' file for printing out the P2M layout.
  xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
  xen/mmu: WARN_ON when racing to swap middle leaf.
  xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
  xen/mmu: Add the notion of identity (1-1) mapping.
  xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.

* 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/e820: Don't mark balloon memory as E820_UNUSABLE when running as guest and fix overflow.
  xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps.

Just need to make sure that AF_UNIX garbage collector won't
confuse O_PATHed socket on filesystem for real AF_UNIX opened
socket.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For readlinkat() we simply allow empty pathname; it will fail unless
we have dfd equal to O_PATH-opened symlink, so we are outside of
POSIX scope here.  For fchownat() and fstatat() we allow AT_EMPTY_PATH;
let the caller explicitly ask for such behaviour.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

At that point we can't do almost nothing with them.  They can be opened
with O_PATH, we can manipulate such descriptors with dup(), etc. and
we can see them in /proc/*/{fd,fdinfo}/*.

We can't (and won't be able to) follow /proc/*/fd/* symlinks for those;
there's simply not enough information for pathname resolution to go on
from such point - to resolve a symlink we need to know which directory
does it live in.

We will be able to do useful things with them after the next commit, though -
readlinkat() and fchownat() will be possible to use with dfd being an
O_PATH-opened symlink and empty relative pathname.  Combined with
open_by_handle() it'll give us a way to do realink-by-handle and
lchown-by-handle without messing with more redundant syscalls.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

New flag for open(2) - O_PATH.  Semantics:
	* pathname is resolved, but the file itself is _NOT_ opened
as far as filesystem is concerned.
	* almost all operations on the resulting descriptors shall
fail with -EBADF.  Exceptions are:
	1) operations on descriptors themselves (i.e.
		close(), dup(), dup2(), dup3(), fcntl(fd, F_DUPFD),
		fcntl(fd, F_DUPFD_CLOEXEC, ...), fcntl(fd, F_GETFD),
		fcntl(fd, F_SETFD, ...))
	2) fcntl(fd, F_GETFL), for a common non-destructive way to
		check if descriptor is open
	3) "dfd" arguments of ...at(2) syscalls, i.e. the starting
		points of pathname resolution
	* closing such descriptor does *NOT* affect dnotify or
posix locks.
	* permissions are checked as usual along the way to file;
no permission checks are applied to the file itself.  Of course,
giving such thing to syscall will result in permission checks (at
the moment it means checking that starting point of ....at() is
a directory and caller has exec permissions on it).

fget() and fget_light() return NULL on such descriptors; use of
fget_raw() and fget_raw_light() is needed to get them.  That protects
existing code from dealing with those things.

There are two things still missing (they come in the next commits):
one is handling of symlinks (right now we refuse to open them that
way; see the next commit for semantics related to those) and another
is descriptor passing via SCM_RIGHTS datagrams.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

File system UUID is made available to application
via  /proc/<pid>/mountinfo
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

File system UUID is made available to application
via  /proc/<pid>/mountinfo
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We add a per superblock uuid field. File systems should
update the uuid in the fill_super callback
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch add new syscalls to x86_64
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch adds new syscalls to x86_32
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that VFS check for inode->i_nlink == 0 and returns proper
error, remove similar check from file system
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add inode->i_nlink == 0 check in VFS. Some of the file systems
do this internally. A followup patch will remove those instance.
This is needed to ensure that with link by handle we don't allow
to create hardlink of an unlinked file. The check also prevent a race
between unlink and link
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

[AV: duplicate of open() guts removed; file_open_root() used instead]
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The syscall also return mount id which can be used
to lookup file system specific information such as uuid
in /proc/<pid>/mountinfo
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For name_to_handle_at(2) we'll want both ...at()-style syscall that
would be usable for non-directory descriptors (with empty relative
pathname).  Introduce new flag (AT_EMPTY_PATH) to deal with that and
corresponding LOOKUP_EMPTY; teach user_path_at() and path_init() to
deal with the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
  MN10300: atomic_read() should ensure it emits a load
  MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
  MN10300: Proper use of macros get_user() in the case of incremented pointers

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
  MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
  MIPS: MTX-1: Make au1000_eth probe all PHY addresses
  MIPS: Jz4740: Add HAVE_CLK
  MIPS: Move idle task creation to work queue
  MIPS, Perf-events: Use unsigned delta for right shift in event update
  MIPS, Perf-events: Work with the new callchain interface
  MIPS, Perf-events: Fix event check in validate_event()
  MIPS, Perf-events: Work with the new PMU interface
  MIPS, Perf-events: Work with irq_work
  MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
  MIPS: Loongson: Fix potentially wrong string handling
  MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
  MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
  MIPS: Remove unused code from arch/mips/kernel/syscall.c
  MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
  MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
  MIPS: Select R4K timer lib for all MSP platforms
  MIPS: Loongson: Remove ad-hoc cmdline default
  MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
  MIPS: Add an unreachable return statement to satisfy buggy GCCs.
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ce4100: Set pci ops via callback instead of module init
  x86/mm: Fix pgd_lock deadlock
  x86/mm: Handle mm_fault_error() in kernel space
  x86: Don't check for BIOS corruption in first 64K when there's no need to

This reverts the parent commit.  I hate doing that, but it's generating
some discussion ("half of it is right"), and since I am planning on
doing the 2.6.38 release later today we can punt it to stable if
required. Let's not rock the boat right now.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

oom_kill_process() starts with victim_points == 0.  This means that
(most likely) any child has more points and can be killed erroneously.

Also, "children has a different mm" doesn't match the reality, we should
check child->mm != t->mm.  This check is not exactly correct if t->mm ==
NULL but this doesn't really matter, oom_kill_task() will kill them
anyway.

Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong
too.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c)
Alchemy-based boards use their own reset function. For MTX-1 and XXS1500,
the reset function pokes at the BCSR.SYSTEM_RESET register, but this does
not work. According to Bruno Randolf, this was not tested when written.

Previously, the generic au1000_restart() routine called the board specific
reset function, which for MTX-1 and XXS1500 did not work, but finally made
a jump to the reset vector, which really triggers a system restart. Fix
reboot for both targets by jumping to the reset vector.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2093/Acked-by: NBruno Randolf <br1@einfach.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.

CC: stable@kernel.org
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>