- 23 12月, 2009 2 次提交
-
-
由 Stefani Seibold 提交于
Move the pointer to the spinlock out of struct kfifo. Most users in tree do not actually use a spinlock, so the few exceptions now have to call kfifo_{get,put}_locked, which takes an extra argument to a spinlock. Signed-off-by: NStefani Seibold <stefani@seibold.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefani Seibold 提交于
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: NStefani Seibold <stefani@seibold.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 12月, 2009 5 次提交
-
-
由 Mike Christie 提交于
It is rare to get a queue full with iscsi, because targets seem to just reduce the iscsi cmd window. However, there is at least one iscsi target that will throw a queue full when overloaded. This hooks the iscsi code in to the ramp up/down code, so we can handle it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
This implements warm target reset tmf support for the scsi-ml target reset callback. Previously we would just drop the session in that callback. This patch will now try a target reset and if that fails drop the session. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
Patch and mail from both MikeC and HannesR: Before we're trying to send a PDU we have to check whether a TMF is active. If so and if the PDU will be affected by the TMF we should allow only Data-out PDUs to be sent. If fast_abort is set, no Data-out PDUs will be sent while a LUN reset is being processed for a affected LUN. fast_abort is now ingored during a ABORT TASK tmf. We will not send any Data-outs for a task if the task is being aborted. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
For some reason we used to check for the the immediate bit set and the opcocde in many places instead of just masking the opcode. In the passthrough code this is a problem because userspace may or may not have set the immediate bit and it does not have to. This fixes up the opcode checks in the passthrough code, so we mask off the opcode then check against the iscsi proto definition like is done in other places. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
This patch modifies scsi_host_template->change_queue_depth so that it takes an argument indicating why it is being called. This will be used so that if a LLD needs to do some extra processing when handling queue fulls or later ramp ups, it can do so. This is a simple port of the drivers setting a change_queue_depth callback. In the patch I just have these LLDs adjust the queue depth if the user was requesting it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> [Vasu.Dev: v2 Also converted pmcraid_change_queue_depth and then verified all modules compile using "make allmodconfig" for any new build warnings on X86_64. Updated original description after combing two original patches from Mike to make this patch git bisectable.] Signed-off-by: NVasu Dev <vasu.dev@intel.com> [jejb: fixed up 53c700] Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 03 10月, 2009 1 次提交
-
-
由 Jayamohan Kallickal 提交于
This patch contains changes that allow iscsi_session_setup to allocate private space for LLD's Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com> Acked-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 12 9月, 2009 2 次提交
-
-
由 Mike Christie 提交于
bnx2i currently has a check for if a ep is properly bound, so if iscsi_queuecommand/xmit_task is called while there is no ep we will not queue IO. be2iscsi sends IO from queuecommand/xmit_task like how bnx2i does and needs a similar test. This patch has us just use the suspend_bit test for this. When ep_poll has succeeed iscsid will call conn_bind, the LLD will then call iscsi_conn_bind which will clear the suspend bit. When ep_disconnect is called (or if there is a conn error) we set the suspend bit. For the ep_disconnect case I am adding a helper in this patch that will take the session lock to make sure iscsi_queuecommand/xmit_task is not running and it will set the suspend bit. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
beiscsi does not need the iscsi scsi cmd processing. It does not even get this info on the completion path. This adds a function to just update the sequencing numbers and complete a task. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 9月, 2009 3 次提交
-
-
由 Mike Christie 提交于
If we had multiple tasks on the cmd or requeue lists, and iscsi_tcp returns a error, the write_space function can still run and queue iscsi_data_xmit. If it was a legetimate problem and iscsi_conn_failure was run but we raced and iscsi_data_xmit was run first it could miss the suspend bit checks, and start trying to send data again and hit another timeout. A similar problem is present when using cxgb3i. This has libiscsi check the suspend bit before calling the xmit task callout, so we at least do not try sending multiple tasks (one could be sent). Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
If we sent multiple pdus as immediate the target could be rejecting some and we have just been dropping the rejection notification. This adds code to handle nop-out rejections, so if a nop-out was sent as a ping and rejected we do not mark the connection bad. Instead we just clean up the timers since we have pdu making a rount trip we know the connection is good. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Christie 提交于
We increment session->cmdsn at the top of iscsi_prep_scsi_cmd_pdu, but if the prep ecb or prep bidi or init_task calls fails then we leave the session->cmdsn incremented. This moves the cmdsn manipulation to the end of the function when we know it has succeeded. It also adds a session->cmdsn--; in queuecommand for if a driver like bnx2i tries to send a a task from that context but it fails. We do not have to do this in the xmit thread context because that code will retry the same task if the initial call fails. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 7月, 2009 1 次提交
-
-
由 Mike Christie 提交于
The session lock can be held in the scsi eh thread or the completion paths run from the net softirq. This disables bhs in iscsi_eh_abort when taking the session lock. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 21 6月, 2009 2 次提交
-
-
由 Erez Zilber 提交于
Allow the user to control the debug logs in libiscsi. We will now have a module param for connection, session & error handling. [Mike Christie - Fixed up to compile on current code and added missing ISCSI_DBG_EH conversions] Signed-off-by: NErez Zilber <erezzi.list@gmail.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If we are sending or receiving data for the task successfully do not run the scsi eh, because we know the task is making progress. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 24 5月, 2009 11 次提交
-
-
由 Mike Christie 提交于
This patch just adds some debug statements for the abort and completion paths. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If a task did not complete normally due to a TMF, libiscsi will now complete the task with the state ISCSI_TASK_ABRT_TMF. Drivers like bnx2i that need to free resources if a command did not complete normally can then check the task state. If a driver does not need to send a special command if we have dropped the session then they can check for ISCSI_TASK_ABRT_SESS_RECOV. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
Instead of having libiscsi check if the offload bit is set, have it check if the lld created a work queue. I think this is more clear. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If the session is failed, but we have not yet fully transitioned to the recovery stage we were still queueuing IO. The idea is that for some failures we can recvover at the command level and still continue to execute other IO. Well, we never have added the recovery within a command code, so queueing up IO here just creates the possibility that it might time time out so this just has us requeue the IO the scsi layer for now. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
bnx2i needs to send a hardware specific cleanup command if a command has not completed normally (iscsi/scsi response from target), and the session is still ok (this is the case when we send a TMF to stop the command). At this time it will need to drop the session lock. The problem with the current code is that fail_all_commands assumes we will hold the lock the entire time, so it uses list_for_each_entry_safe. If while bnx2i drops the session lock multiple cmds complete then list_for_each_entry_safe will not handle this correctly. This patch removes the running lists and just has us loop over the cmds array (in later patches we will then replace that array with a block tag map at the session level). It also fixes up the completion path so that if the TMF code and the normal recv path were completing the same command then they both do not try to do release the refcount taken when the task is queued. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If we have not got any pdus for recv_timeout seconds, then we will send a iscsi ping/nop to make sure the target is still around. The problem is if this is a slow link, and the ping got queued after the data for a data_out (read), then the transport code could think the ping has failed when it is just slowly making its way through the network. This patch has us check if we are making progress while the nop is outstanding. If we are still reading in data, then we do not fail the session at that time. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If we are responding to a nop from the target by sending our nop, and the session is getting torn down, then iscsi_start_session_recovery could set the conn stop bits while the recv path is sending the nop response and we will hit the bug ons in __iscsi_conn_send_pdu. This has us check the state in __iscsi_conn_send_pdu and fail all incoming mgmt IO if we are not logged in and if the pdu is not login related. It also changes the ordering of the setting of conn stop state bits so they are set after the session state is set (both are set under the session lock). Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
This has iscsi_data_in_rsp call iscsi_update_cmdsn when a pdu is completed like is done for other pdu's that are don. For libiscsi_tcp, this means that it calls iscsi_update_cmdsn when it is handling the pdu internally to only transfer data, but if there is status then it does not need to call it since the completion handling will do it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
bnx2i needs to be able to look up mgmt task like login and nop, because it does some processing of them on the completion path. This exports iscsi_itt_to_task so it can look up the task. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If we could not allocate the initiator name or some other id like the hwaddress or netdev, then userspace could deal with the failure by just running in a dregraded mode. Now we want to be able to switch values for the params and we want some feedback, so this patch will check if a string like the initiatorname could not be allocated and return an error. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
bnx2i does not have one. It currently preallocates the bdt when the session is setup. We probably want to change that to a dma pool, then allocate from the pool in the alloc pdu. Until then check if there is a alloc pdu callout. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 27 4月, 2009 1 次提交
-
-
由 Mike Christie 提交于
Set target can queue limit to the number of preallocated session tasks we have. This along with the cxgb3i can_queue patch will fix a throughput problem where it could only queue one LU worth of data at a time. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 03 4月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
Le lundi 30 mars 2009, Chris Wright a écrit : > q->queue could be ERR_PTR(-ENOMEM) which will break unwinding > on error. Make iscsi_pool_free more defensive. > Making the freeing of q->queue dependent on q->pool being set looks really weird (although it is correct at the moment. But this seems to be fixable in a much simpler way. With the benefit that only the error case is slowed down. In both cases we have a problem if q->queue contains an error value but it's not -ENOMEM. Apparently this can't happen today, but it doesn't feel right to assume this will always be true. Maybe it's the right time to fix this as well. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 14 3月, 2009 7 次提交
-
-
由 Mike Christie 提交于
If the iscsi eh fires when the current task is a nop, then the task->sc pointer is null. fail_all_commands could then try to do task->sc->device and oops. We actually do not need to access the curr task in this path, because if it is a cmd task the fail_command call will handle this and if it is mgmt task then the flush of the mgmt queues will handle that. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
The api for conn and session failures is akward because one takes a conn from the lib and one takes a session from the class. This syncs up the interfaces to use structs from the lib. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
The qdepth setting was useful when we needed libiscsi to verify the setting. Now we just need to make sure if older tools passed in zero then we need to set some default. So this patch just has us use the sht->cmd_per_lun or if for LLD does a host per session then we can set it on per host basis. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
We were using the shost work queue which ended up being a little akward since all iscsi hosts need a thread for scanning, but only drivers hooked into libiscsi need a workqueue for transmitting. So this patch moves the xmit workqueue to the lib. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
There is no need to cap the queue depth in the modules. We set this in userspace and can do that there. For performance testing with ram based targets, this is helpful since we can have very high queue depths. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
This makes the logging a compile time option and replaces the scsi_debug macro with session and connection ones that print out a driver model id prefix. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Jean Delvare 提交于
Memory freeing in iscsi_pool_free() looks wrong to me. Either q->pool can be NULL and this should be tested before dereferencing it, or it can't be NULL and it shouldn't be tested at all. As far as I can see, the only case where q->pool is NULL is on early error in iscsi_pool_init(). One possible way to fix the bug is thus to not call iscsi_pool_free() in this case (nothing needs to be freed anyway) and then we can get rid of the q->pool check. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 11 2月, 2009 1 次提交
-
-
由 Mike Christie 提交于
Yanling Qi from LSI found the root cause of the panic, below is his analysis: Problem description: the open iscsi driver installs eh_timed_out handler to the blank_transport_template of the scsi middle level that causes panic of timed out command of other host Here are the details Iscsi Session creation During iscsi session creation time, the iscsi_tcp_session_create() of iscsi_tpc.c will create a scsi-host for the session. See the statement marked with the label A. The statement B replaces the shost->transportt point with a local struct variable. static struct iscsi_cls_session * iscsi_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, uint32_t initial_cmdsn, uint32_t *hostno) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct Scsi_Host *shost; int cmd_i; if (ep) { printk(KERN_ERR "iscsi_tcp: invalid ep %p.\n", ep); return NULL; } A shost = iscsi_host_alloc(&iscsi_sht, 0, qdepth); if (!shost) return NULL; B shost->transportt = iscsi_tcp_scsi_transport; shost->max_lun = iscsi_max_lun; Please note the scsi host is allocated by invoking isccsi_host_alloc() in libiscsi.c Polluting the middle level blank_transport_template in iscsi_host_alloc() of libiscsi.c The iscsi_host_alloc() invokes the middle level function scsi_host_alloc() in hosts.c for allocating a scsi_host. Then the statement marked with C assigns the iscsi_eh_cmd_timed_out handler to the eh_timed_out callback function. struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, int dd_data_size, uint16_t qdepth) { struct Scsi_Host *shost; struct iscsi_host *ihost; shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; C shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; Please note the shost->transport is the middle level blank_transport_template as shown in the code segment below. We see two problems here. 1. iscsi_eh_cmd_timed_out is installed to the blank_transport_template that will cause some body else problem. 2. iscsi_eh_cmd_timed_out will never be invoked when iscsi command gets timeout because the statement B resets the pointer. Middle level blank_transport_template In the middle level function scsi_host_alloc() of hosts.c, the middle level assigns a blank_transport_template for those hosts not implementing its transport layer. All HBAs without supporting a specific scsi_transport will share the middle level blank_transport_template. Please see the statement D struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) { struct Scsi_Host *shost; gfp_t gfp_mask = GFP_KERNEL; int rval; if (sht->unchecked_isa_dma && privsize) gfp_mask |= __GFP_DMA; shost = kzalloc(sizeof(struct Scsi_Host) + privsize, gfp_mask); if (!shost) return NULL; shost->host_lock = &shost->default_lock; spin_lock_init(shost->host_lock); shost->shost_state = SHOST_CREATED; INIT_LIST_HEAD(&shost->__devices); INIT_LIST_HEAD(&shost->__targets); INIT_LIST_HEAD(&shost->eh_cmd_q); INIT_LIST_HEAD(&shost->starved_list); init_waitqueue_head(&shost->host_wait); mutex_init(&shost->scan_mutex); shost->host_no = scsi_host_next_hn++; /* XXX(hch): still racy */ shost->dma_channel = 0xff; /* These three are default values which can be overridden */ shost->max_channel = 0; shost->max_id = 8; shost->max_lun = 8; /* Give each shost a default transportt */ D shost->transportt = &blank_transport_template; Why we see panic at iscsi_eh_cmd_timed_out() The mpp virtual HBA doesn’t have a specific scsi_transport. Therefore, the blank_transport_template will be assigned to the virtual host of the MPP virtual HBA by SCSI middle level. Please note that the statement C has assigned iscsi-transport eh_timedout handler to the blank_transport_template. When a mpp virtual command gets timedout, the iscsi_eh_cmd_timed_out() will be invoked to handle mpp virtual command timeout from the middle level scsi_times_out() function of the scsi_error.c. enum blk_eh_timer_return scsi_times_out(struct request *req) { struct scsi_cmnd *scmd = req->special; enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *); enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED; scsi_log_completion(scmd, TIMEOUT_ERROR); if (scmd->device->host->transportt->eh_timed_out) E eh_timed_out = scmd->device->host->transportt->eh_timed_out; else if (scmd->device->host->hostt->eh_timed_out) eh_timed_out = scmd->device->host->hostt->eh_timed_out; else eh_timed_out = NULL; if (eh_timed_out) { rtn = eh_timed_out(scmd); It is very easy to understand why we get panic in the iscsi_eh_cmd_timed_out(). A scsi_cmnd from a no-iscsi device definitely can not resolve out a session and session->lock. The panic can be happed anywhere during the differencing. static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; struct iscsi_conn *conn; enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED; cls_session = starget_to_session(scsi_target(scmd->device)); session = cls_session->dd_data; debug_scsi("scsi cmd %p timedout\n", scmd); spin_lock(&session->lock); This patch fixes the problem by moving the setting of the iscsi_eh_cmd_timed_out to iscsi_add_host, which is after the LLDs have set their transport template to shost->transportt. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 25 1月, 2009 1 次提交
-
-
由 Mike Christie 提交于
I am not sure what happened. It looks like we have always leaked the q->queue that is allocated from the kfifo_init call. nab finally noticed that we were leaking and this patch fixes it by adding a kfree call to iscsi_pool_free. kfifo_free is not used per kfifo_init's instructions to use kfree. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 30 12月, 2008 2 次提交
-
-
由 Mike Christie 提交于
Mgmt setup used to not fail so we did not have to check the return value. Now with cxgb3i it can so this has us pass up a error. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
We do not need to allocate a itt for data_out, so this passes the opcode to the alloc_pdu callout. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-