commit 2c012a4ad1a2cd3fb5a0f9307b9d219f84eda1fa upstream.

When file refaults are detected and there are many inactive file pages,
the system never reclaim anonymous pages, the file pages are dropped
aggressively when there are still a lot of cold anonymous pages and
system thrashes.  This issue impacts the performance of applications
with large executable, e.g.  chrome.

With this patch, when file refault is detected, inactive_list_is_low()
always returns true for file pages in get_scan_count() to enable
scanning anonymous pages.

The problem can be reproduced by the following test program.

---8<---
void fallocate_file(const char *filename, off_t size)
{
	struct stat st;
	int fd;

	if (!stat(filename, &st) && st.st_size >= size)
		return;

	fd = open(filename, O_WRONLY | O_CREAT, 0600);
	if (fd < 0) {
		perror("create file");
		exit(1);
	}
	if (posix_fallocate(fd, 0, size)) {
		perror("fallocate");
		exit(1);
	}
	close(fd);
}

long *alloc_anon(long size)
{
	long *start = malloc(size);
	memset(start, 1, size);
	return start;
}

long access_file(const char *filename, long size, long rounds)
{
	int fd, i;
	volatile char *start1, *end1, *start2;
	const int page_size = getpagesize();
	long sum = 0;

	fd = open(filename, O_RDONLY);
	if (fd == -1) {
		perror("open");
		exit(1);
	}

	/*
	 * Some applications, e.g. chrome, use a lot of executable file
	 * pages, map some of the pages with PROT_EXEC flag to simulate
	 * the behavior.
	 */
	start1 = mmap(NULL, size / 2, PROT_READ | PROT_EXEC, MAP_SHARED,
		      fd, 0);
	if (start1 == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	end1 = start1 + size / 2;

	start2 = mmap(NULL, size / 2, PROT_READ, MAP_SHARED, fd, size / 2);
	if (start2 == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}

	for (i = 0; i < rounds; ++i) {
		struct timeval before, after;
		volatile char *ptr1 = start1, *ptr2 = start2;
		gettimeofday(&before, NULL);
		for (; ptr1 < end1; ptr1 += page_size, ptr2 += page_size)
			sum += *ptr1 + *ptr2;
		gettimeofday(&after, NULL);
		printf("File access time, round %d: %f (sec)
", i,
		       (after.tv_sec - before.tv_sec) +
		       (after.tv_usec - before.tv_usec) / 1000000.0);
	}
	return sum;
}

int main(int argc, char *argv[])
{
	const long MB = 1024 * 1024;
	long anon_mb, file_mb, file_rounds;
	const char filename[] = "large";
	long *ret1;
	long ret2;

	if (argc != 4) {
		printf("usage: thrash ANON_MB FILE_MB FILE_ROUNDS
");
		exit(0);
	}
	anon_mb = atoi(argv[1]);
	file_mb = atoi(argv[2]);
	file_rounds = atoi(argv[3]);

	fallocate_file(filename, file_mb * MB);
	printf("Allocate %ld MB anonymous pages
", anon_mb);
	ret1 = alloc_anon(anon_mb * MB);
	printf("Access %ld MB file pages
", file_mb);
	ret2 = access_file(filename, file_mb * MB, file_rounds);
	printf("Print result to prevent optimization: %ld
",
	       *ret1 + ret2);
	return 0;
}
---8<---

Running the test program on 2GB RAM VM with kernel 5.2.0-rc5, the program
fills ram with 2048 MB memory, access a 200 MB file for 10 times.  Without
this patch, the file cache is dropped aggresively and every access to the
file is from disk.

  $ ./thrash 2048 200 10
  Allocate 2048 MB anonymous pages
  Access 200 MB file pages
  File access time, round 0: 2.489316 (sec)
  File access time, round 1: 2.581277 (sec)
  File access time, round 2: 2.487624 (sec)
  File access time, round 3: 2.449100 (sec)
  File access time, round 4: 2.420423 (sec)
  File access time, round 5: 2.343411 (sec)
  File access time, round 6: 2.454833 (sec)
  File access time, round 7: 2.483398 (sec)
  File access time, round 8: 2.572701 (sec)
  File access time, round 9: 2.493014 (sec)

With this patch, these file pages can be cached.

  $ ./thrash 2048 200 10
  Allocate 2048 MB anonymous pages
  Access 200 MB file pages
  File access time, round 0: 2.475189 (sec)
  File access time, round 1: 2.440777 (sec)
  File access time, round 2: 2.411671 (sec)
  File access time, round 3: 1.955267 (sec)
  File access time, round 4: 0.029924 (sec)
  File access time, round 5: 0.000808 (sec)
  File access time, round 6: 0.000771 (sec)
  File access time, round 7: 0.000746 (sec)
  File access time, round 8: 0.000738 (sec)
  File access time, round 9: 0.000747 (sec)

Checked the swap out stats during the test [1], 19006 pages swapped out
with this patch, 3418 pages swapped out without this patch. There are
more swap out, but I think it's within reasonable range when file backed
data set doesn't fit into the memory.

$ ./thrash 2000 100 2100 5 1 # ANON_MB FILE_EXEC FILE_NOEXEC ROUNDS
PROCESSES Allocate 2000 MB anonymous pages active_anon: 1613644,
inactive_anon: 348656, active_file: 892, inactive_file: 1384 (kB)
pswpout: 7972443, pgpgin: 478615246 Access 100 MB executable file pages
Access 2100 MB regular file pages File access time, round 0: 12.165,
(sec) active_anon: 1433788, inactive_anon: 478116, active_file: 17896,
inactive_file: 24328 (kB) File access time, round 1: 11.493, (sec)
active_anon: 1430576, inactive_anon: 477144, active_file: 25440,
inactive_file: 26172 (kB) File access time, round 2: 11.455, (sec)
active_anon: 1427436, inactive_anon: 476060, active_file: 21112,
inactive_file: 28808 (kB) File access time, round 3: 11.454, (sec)
active_anon: 1420444, inactive_anon: 473632, active_file: 23216,
inactive_file: 35036 (kB) File access time, round 4: 11.479, (sec)
active_anon: 1413964, inactive_anon: 471460, active_file: 31728,
inactive_file: 32224 (kB) pswpout: 7991449 (+ 19006), pgpgin: 489924366
(+ 11309120)

With 4 processes accessing non-overlapping parts of a large file, 30316
pages swapped out with this patch, 5152 pages swapped out without this
patch.  The swapout number is small comparing to pgpgin.

[1]: https://github.com/vovo/testing/blob/master/mem_thrash.c

Link: http://lkml.kernel.org/r/20190701081038.GA83398@google.com
Fixes: e9868505 ("mm,vmscan: only evict file pages when we have plenty")
Fixes: 7c5bd705 ("mm: memcg: only evict file pages when we have plenty")
Signed-off-by: NKuo-Hsin Yang <vovoy@chromium.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>	[4.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
[backported to 4.14.y, 4.19.y, 5.1.y: adjust context]
Signed-off-by: NKuo-Hsin Yang <vovoy@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf64527bb33f6cec2ed50f89182fc4688d0056b6 upstream.

Letting this pend may cause nested_get_vmcs12_pages to run against an
invalid state, corrupting the effective vmcs of L1.

This was triggerable in QEMU after a guest corruption in L2, followed by
a L1 reset.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 7f7f1ba3 ("KVM: x86: do not load vmcs12 pages while still in SMM")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 88dddc11a8d6b09201b4db9d255b3394d9bc9e57 upstream.

If a KVM guest is reset while running a nested guest, free_nested will
disable the shadow VMCS execution control in the vmcs01.  However,
on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync
the VMCS12 to the shadow VMCS which has since been freed.

This causes a vmptrld of a NULL pointer on my machime, but Jan reports
the host to hang altogether.  Let's see how much this trivial patch fixes.
Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e19d6b65fb4fc42e352ce9883649e049da14743 upstream.

The largedir feature was intended to allow ext4 directories to have
unmapped directory blocks (e.g., directory holes).  And so the
released e2fsprogs no longer enforces this for largedir file systems;
however, the corresponding change to the kernel-side code was not made.

This commit fixes this oversight.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 73131fbb003b3691cfcf9656f234b00da497fcd6 upstream.

Use the newly introduced jbd2_inode dirty range scoping to prevent us
from waiting forever when trying to complete a journal transaction.
Signed-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ba0e7dc64a5adcda2fbe65adc466891795d639e upstream.

Currently both journal_submit_inode_data_buffers() and
journal_finish_inode_data_buffers() operate on the entire address space
of each of the inodes associated with a given journal entry.  The
consequence of this is that if we have an inode where we are constantly
appending dirty pages we can end up waiting for an indefinite amount of
time in journal_finish_inode_data_buffers() while we wait for all the
pages under writeback to be written out.

The easiest way to cause this type of workload is do just dd from
/dev/zero to a file until it fills the entire filesystem.  This can
cause journal_finish_inode_data_buffers() to wait for the duration of
the entire dd operation.

We can improve this situation by scoping each of the inode dirty ranges
associated with a given transaction.  We do this via the jbd2_inode
structure so that the scoping is contained within jbd2 and so that it
follows the lifetime and locking rules for that structure.

This allows us to limit the writeback & wait in
journal_submit_inode_data_buffers() and
journal_finish_inode_data_buffers() respectively to the dirty range for
a given struct jdb2_inode, keeping us from waiting forever if the inode
in question is still being appended to.
Signed-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa0bfcd939c30617385ffa28682c062d78050eba upstream.

In the spirit of filemap_fdatawait_range() and
filemap_fdatawait_keep_errors(), introduce
filemap_fdatawait_range_keep_errors() which both takes a range upon
which to wait and does not clear errors from the address space.
Signed-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 02b016ca7f99229ae6227e7b2fc950c4e140d74a upstream.

According to the chattr man page, "a file with the 'i' attribute
cannot be modified..."  Historically, this was only enforced when the
file was opened, per the rest of the description, "... and the file
can not be opened in write mode".

There is general agreement that we should standardize all file systems
to prevent modifications even for files that were opened at the time
the immutable flag is set.  Eventually, a change to enforce this at
the VFS layer should be landing in mainline.  Until then, enforce this
at the ext4 level to prevent xfstests generic/553 from failing.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2e53840362771c73eb0a5ff71611507e64e8eecd upstream.

Don't allow any modifications to a file that's marked immutable, which
means that we have to flush all the writable pages to make the readonly
and we have to check the setattr/setflags parameters more closely.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1cf8dfe8a661f0462925df943140e9f6d1ea5233 upstream.

Syzcaller reported the following Use-after-Free bug:

	close()						clone()

							  copy_process()
							    perf_event_init_task()
							      perf_event_init_context()
							        mutex_lock(parent_ctx->mutex)
								inherit_task_group()
								  inherit_group()
								    inherit_event()
								      mutex_lock(event->child_mutex)
								      // expose event on child list
								      list_add_tail()
								      mutex_unlock(event->child_mutex)
							        mutex_unlock(parent_ctx->mutex)

							    ...
							    goto bad_fork_*

							  bad_fork_cleanup_perf:
							    perf_event_free_task()

	  perf_release()
	    perf_event_release_kernel()
	      list_for_each_entry()
		mutex_lock(ctx->mutex)
		mutex_lock(event->child_mutex)
		// event is from the failing inherit
		// on the other CPU
		perf_remove_from_context()
		list_move()
		mutex_unlock(event->child_mutex)
		mutex_unlock(ctx->mutex)

							      mutex_lock(ctx->mutex)
							      list_for_each_entry_safe()
							        // event already stolen
							      mutex_unlock(ctx->mutex)

							    delayed_free_task()
							      free_task()

	     list_for_each_entry_safe()
	       list_del()
	       free_event()
	         _free_event()
		   // and so event->hw.target
		   // is the already freed failed clone()
		   if (event->hw.target)
		     put_task_struct(event->hw.target)
		       // WHOOPSIE, already quite dead

Which puts the lie to the the comment on perf_event_free_task():
'unexposed, unused context' not so much.

Which is a 'fun' confluence of fail; copy_process() doing an
unconditional free_task() and not respecting refcounts, and perf having
creative locking. In particular:

  82d94856 ("perf/core: Fix lock inversion between perf,trace,cpuhp")

seems to have overlooked this 'fun' parade.

Solve it by using the fact that detached events still have a reference
count on their (previous) context. With this perf_event_free_task()
can detect when events have escaped and wait for their destruction.
Debugged-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: syzbot+a24c397a29ad22d86c98@syzkaller.appspotmail.com
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 82d94856 ("perf/core: Fix lock inversion between perf,trace,cpuhp")
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8a58ddae23796c733c5dfbd717538d89d036c5bd upstream.

So far, we tried to disallow grouping exclusive events for the fear of
complications they would cause with moving between contexts. Specifically,
moving a software group to a hardware context would violate the exclusivity
rules if both groups contain matching exclusive events.

This attempt was, however, unsuccessful: the check that we have in the
perf_event_open() syscall is both wrong (looks at wrong PMU) and
insufficient (group leader may still be exclusive), as can be illustrated
by running:

  $ perf record -e '{intel_pt//,cycles}' uname
  $ perf record -e '{cycles,intel_pt//}' uname

ultimately successfully.

Furthermore, we are completely free to trigger the exclusivity violation
by:

   perf -e '{cycles,intel_pt//}' -e '{intel_pt//,instructions}'

even though the helpful perf record will not allow that, the ABI will.

The warning later in the perf_event_open() path will also not trigger, because
it's also wrong.

Fix all this by validating the original group before moving, getting rid
of broken safeguards and placing a useful one to perf_install_in_context().
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mathieu.poirier@linaro.org
Cc: will.deacon@arm.com
Fixes: bed5b25a ("perf: Add a pmu capability for "exclusive" events")
Link: https://lkml.kernel.org/r/20190701110755.24646-1-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1323c3b72a987de57141cabc44bf9cd83656bc70 upstream.

The pin mappings introduced in commit 636f8ba6
("MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers")
are completely wrong. The pinctrl driver name is incorrect, and the
function and group fields are swapped.

Fixes: 636f8ba6 ("MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers")
Cc: <stable@vger.kernel.org>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: od@zcrc.me
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 541e4095f388c196685685633c950cb9b97f8039 upstream.

Silence error prints in case of EPROBE_DEFER. This avoids
multiple/duplicate defer prints during boot.

Cc: <stable@vger.kernel.org>
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f5b07b04e5f090a85d1e96938520f2b2b58e4a8e upstream.

If we have to drop the seqcount & rcu lock to perform a krealloc, we
have to restart the loop. In doing so, be careful not to lose track of
the already acquired exclusive fence.

Fixes: fedf5413 ("dma-buf: Restart reservation_object_get_fences_rcu() after writes")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: stable@vger.kernel.org #v4.10
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604125323.21396-1-chris@chris-wilson.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e383a9798990c69fc759a4930de224bb497e62c upstream.

The debugfs take reference on fence without dropping them.
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206161840.6578-1-jglisse@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2446a68ae6a8cee6d480e2f5b52f5007c7c41312 ]

Don't cache eth dest pointer before calling pskb_may_pull.

Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3d26eb8ad1e9b906433903ce05f775cf038e747f ]

We would cache ether dst pointer on input in br_handle_frame_finish but
after the neigh suppress code that could lead to a stale pointer since
both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to
always reload it after the suppress code so there's no point in having
it cached just retrieve it directly.

Fixes: 057658cb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3b26a5d03d35d8f732d75951218983c0f7f68dff ]

We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.

Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e57f61858b7cf478ed6fa23ed4b3876b1c9625c4 ]

We take a pointer to grec prior to calling pskb_may_pull and use it
afterwards to get nsrcs so record nsrcs before the pull when handling
igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling
mld2 which again could lead to reading 2 bytes out-of-bounds.

 ==================================================================
 BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge]
 Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16

 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G           OE     5.2.0-rc6+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x71/0xab
  print_address_description+0x6a/0x280
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  __kasan_report+0x152/0x1aa
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  kasan_report+0xe/0x20
  br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_disable_port+0x150/0x150 [bridge]
  ? ktime_get_with_offset+0xb4/0x150
  ? __kasan_kmalloc.constprop.6+0xa6/0xf0
  ? __netif_receive_skb+0x1b0/0x1b0
  ? br_fdb_update+0x10e/0x6e0 [bridge]
  ? br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  ? br_pass_frame_up+0x3a0/0x3a0 [bridge]
  ? virtnet_probe+0x1c80/0x1c80 [virtio_net]
  br_handle_frame+0x731/0xd90 [bridge]
  ? select_idle_sibling+0x25/0x7d0
  ? br_handle_frame_finish+0x11d0/0x11d0 [bridge]
  __netif_receive_skb_core+0xced/0x2d70
  ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring]
  ? do_xdp_generic+0x20/0x20
  ? virtqueue_napi_complete+0x39/0x70 [virtio_net]
  ? virtnet_poll+0x94d/0xc78 [virtio_net]
  ? receive_buf+0x5120/0x5120 [virtio_net]
  ? __netif_receive_skb_one_core+0x97/0x1d0
  __netif_receive_skb_one_core+0x97/0x1d0
  ? __netif_receive_skb_core+0x2d70/0x2d70
  ? _raw_write_trylock+0x100/0x100
  ? __queue_work+0x41e/0xbe0
  process_backlog+0x19c/0x650
  ? _raw_read_lock_irq+0x40/0x40
  net_rx_action+0x71e/0xbc0
  ? __switch_to_asm+0x40/0x70
  ? napi_complete_done+0x360/0x360
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __schedule+0x85e/0x14d0
  __do_softirq+0x1db/0x5f9
  ? takeover_tasklets+0x5f0/0x5f0
  run_ksoftirqd+0x26/0x40
  smpboot_thread_fn+0x443/0x680
  ? sort_range+0x20/0x20
  ? schedule+0x94/0x210
  ? __kthread_parkme+0x78/0xf0
  ? sort_range+0x20/0x20
  kthread+0x2ae/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x35/0x40

 The buggy address belongs to the page:
 page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
 flags: 0xffffc000000000()
 raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000
 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
 ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                     ^
 ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ==================================================================
 Disabling lock debugging due to kernel taint

Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Reported-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9b6c08878e23adb7cc84bdca94d8a944b03f099e ]

Now when sctp_connect() is called with a wrong sa_family, it binds
to a port but doesn't set bp->port, then sctp_get_af_specific will
return NULL and sctp_connect() returns -EINVAL.

Then if sctp_bind() is called to bind to another port, the last
port it has bound will leak due to bp->port is NULL by then.

sctp_connect() doesn't need to bind ports, as later __sctp_connect
will do it if bp->port is NULL. So remove it from sctp_connect().
While at it, remove the unnecessary sockaddr.sa_family len check
as it's already done in sctp_inet_connect.

Fixes: 644fbdea ("sctp: fix the issue that flags are ignored when using kernel_connect")
Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit acd3e96d53a24d219f720ed4012b62723ae05da1 ]

Commit 86029d10 ("tls: zero the crypto information from tls_context
before freeing") added memzero_explicit() calls to clear the key material
before freeing struct tls_context, but it missed tls_device.c has its
own way of freeing this structure. Replace the missing free.

Fixes: 86029d10 ("tls: zero the crypto information from tls_context before freeing")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3f05e6886a595c9a29a309c52f45326be917823c ]

For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS,
notably fq_codel, it makes no sense to let packets bypass the TC
filters we setup in any scenario, otherwise our packets steering
policy could not be enforced.

This can be reproduced easily with the following script:

 ip li add dev dummy0 type dummy
 ifconfig dummy0 up
 tc qd add dev dummy0 root fq_codel
 tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo
 tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo
 ping -I dummy0 192.168.112.1

Without this patch, packets are sent directly to dummy0 without
hitting any of the filters. With this patch, packets are redirected
to loopback as expected.

This fix is not perfect, it only unsets the flag but does not set it back
because we have to save the information somewhere in the qdisc if we
really want that. Note, both fq_codel and sfq clear this flag in their
->bind_tcf() but this is clearly not sufficient when we don't use any
class ID.

Fixes: 23624935 ("net_sched: TCQ_F_CAN_BYPASS generalization")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4638faac032756f7eab5524be7be56bee77e426b ]

sock_efree() releases the sock refcnt, if we don't hold this refcnt
when setting skb->destructor to it, the refcnt would not be balanced.
This leads to several bug reports from syzbot.

I have checked other users of sock_efree(), all of them hold the
sock refcnt.

Fixes: c8c8218ec5af ("netrom: fix a memory leak in nr_rx_frame()")
Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c8c8218ec5af5d2598381883acbefbf604e56b5e ]

When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.

Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7d8b16b9facb0dd81d1469808dd9a575fa1d525a ]

Fix checksumming after decryption.
Signed-off-by: NAndreas Steinmetz <ast@domdv.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 095c02da80a41cf6d311c504d8955d6d1c2add10 ]

Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS.
Signed-off-by: NAndreas Steinmetz <ast@domdv.de>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ef1ce7d7b67b46661091c7ccc0396186b7a247ef ]

Check return value from mlx5e_attach_netdev, add error path on failure.

Fixes: 48935bbb ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 107e47cc80ec37cb332bd41b22b1c7779e22e018 ]

vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).

Case:

1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.

So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.
Signed-off-by: NPeter Kosyh <p.kosyh@gmail.com>
Reviewed-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e858faf556d4e14c750ba1e8852783c6f9520a0e ]

If an app is playing tricks to reuse a socket via tcp_disconnect(),
bytes_acked/received needs to be reset to 0. Otherwise tcp_info will
report the sum of the current and the old connection..

Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: bdd1f9ed ("tcp: add tcpi_bytes_received to tcp_info")
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8d650cdedaabb33e85e9b7c517c0c71fcecc1de9 ]

Neal reported incorrect use of ns_capable() from bpf hook.

bpf_setsockopt(...TCP_CONGESTION...)
  -> tcp_set_congestion_control()
   -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)
    -> ns_capable_common()
     -> current_cred()
      -> rcu_dereference_protected(current->cred, 1)

Accessing 'current' in bpf context makes no sense, since packets
are processed from softirq context.

As Neal stated : The capability check in tcp_set_congestion_control()
was written assuming a system call context, and then was reused from
a BPF call site.

The fix is to add a new parameter to tcp_set_congestion_control(),
so that the ns_capable() call is only performed under the right
context.

Fixes: 91b5b21c ("bpf: Add support for changing congestion control")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Reported-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NLawrence Brakmo <brakmo@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b617158dc096709d8600c53b6052144d12b89fab ]

Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.

We should allow these flows to make progress.

This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.

It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15

Note for < 4.15 backports :
 tcp_rtx_queue_tail() will probably look like :

static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk)
{
	struct sk_buff *skb = tcp_send_head(sk);

	return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk);
}

Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrew Prout <aprout@ll.mit.edu>
Tested-by: NAndrew Prout <aprout@ll.mit.edu>
Tested-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Tested-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NChristoph Paasch <cpaasch@apple.com>
Cc: Jonathan Looney <jtl@netflix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a261e3797506bd561700be643fe1a85bf81e9661 ]

The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume
due to the infamous IRQ problem.  Disabling MSI works around it, so
let's add it to the blacklist.

Unfortunately the BIOS on the machine doesn't fill the standard
DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496Reported-and-tested-by: NMarcus Seyfarth <m.seyfarth@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4d1415811e492d9a8238f8a92dd0d51612c788e9 ]

It allocates the extended area for outbound streams only on sendmsg
calls, if they are not yet allocated.  When using the priority
stream scheduler, this initialization may imply into a subsequent
allocation, which may fail.  In this case, it was aborting the stream
scheduler initialization but leaving the ->ext pointer (allocated) in
there, thus in a partially initialized state.  On a subsequent call to
sendmsg, it would notice the ->ext pointer in there, and trip on
uninitialized stuff when trying to schedule the data chunk.

The fix is undo the ->ext initialization if the stream scheduler
initialization fails and avoid the partially initialized state.

Although syzkaller bisected this to commit 4ff40b86262b ("sctp: set
chunk transport correctly when it's a new asoc"), this bug was actually
introduced on the commit I marked below.

Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com
Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations")
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e835ada07091f40dcfb1bc735082bd0a7c005e59 ]

If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.

Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.

Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.

This can be tested with:

	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <sys/socket.h>
	#include <arpa/inet.h>
	#include <linux/rxrpc.h>
	static const unsigned char inet6_addr[16] = {
		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
	};
	int main(void)
	{
		struct sockaddr_rxrpc srx;
		struct cmsghdr *cm;
		struct msghdr msg;
		unsigned char control[16];
		int fd;
		memset(&srx, 0, sizeof(srx));
		srx.srx_family = 0x21;
		srx.srx_service = 0;
		srx.transport_type = AF_INET;
		srx.transport_len = 0x1c;
		srx.transport.sin6.sin6_family = AF_INET6;
		srx.transport.sin6.sin6_port = htons(0x4e22);
		srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
		srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
		memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
		cm = (struct cmsghdr *)control;
		cm->cmsg_len	= CMSG_LEN(sizeof(unsigned long));
		cm->cmsg_level	= SOL_RXRPC;
		cm->cmsg_type	= RXRPC_USER_CALL_ID;
		*(unsigned long *)CMSG_DATA(cm) = 0;
		msg.msg_name = NULL;
		msg.msg_namelen = 0;
		msg.msg_iov = NULL;
		msg.msg_iovlen = 0;
		msg.msg_control = control;
		msg.msg_controllen = cm->cmsg_len;
		msg.msg_flags = 0;
		fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
		connect(fd, (struct sockaddr *)&srx, sizeof(srx));
		sendmsg(fd, &msg, 0);
		return 0;
	}

Leading to the following oops:

	BUG: kernel NULL pointer dereference, address: 0000000000000018
	#PF: supervisor read access in kernel mode
	#PF: error_code(0x0000) - not-present page
	...
	RIP: 0010:rxrpc_connect_call+0x42/0xa01
	...
	Call Trace:
	 ? mark_held_locks+0x47/0x59
	 ? __local_bh_enable_ip+0xb6/0xba
	 rxrpc_new_client_call+0x3b1/0x762
	 ? rxrpc_do_sendmsg+0x3c0/0x92e
	 rxrpc_do_sendmsg+0x3c0/0x92e
	 rxrpc_sendmsg+0x16b/0x1b5
	 sock_sendmsg+0x2d/0x39
	 ___sys_sendmsg+0x1a4/0x22a
	 ? release_sock+0x19/0x9e
	 ? reacquire_held_locks+0x136/0x160
	 ? release_sock+0x19/0x9e
	 ? find_held_lock+0x2b/0x6e
	 ? __lock_acquire+0x268/0xf73
	 ? rxrpc_connect+0xdd/0xe4
	 ? __local_bh_enable_ip+0xb6/0xba
	 __sys_sendmsg+0x5e/0x94
	 do_syscall_64+0x7d/0x1bf
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2341e077 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fe4e8db0392a6c2e795eb89ef5fcd86522e66248 ]

On RTL8411b the RX unit gets confused if the PHY is powered-down.
This was reported in [0] and confirmed by Realtek. Realtek provided
a sequence to fix the RX unit after PHY wakeup.

The issue itself seems to have been there longer, the Fixes tag
refers to where the fix applies properly.

[0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075

Fixes: a99790bf ("r8169: Reinstate ASPM Support")
Tested-by: NIonut Radu <ionut.radu@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dd006fc434e107ef90f7de0db9907cbc1c521645 ]

The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4993e5b37e8bcb55ac90f76eb6d2432647273747 ]

Ben Hutchings says:
	"This is the wrong place to change the queue mapping.
	stmmac_xmit() is called with a specific TX queue locked,
	and accessing a different TX queue results in a data race
	for all of that queue's state.

	I think this commit should be reverted upstream and in all
	stable branches.  Instead, the driver should implement the
	ndo_select_queue operation and override the queue mapping there."

Fixes: c5acdbee22a1 ("net: stmmac: Send TSO packets always from Queue 0")
Suggested-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0cea0e1148fe134a4a3aaf0b1496f09241fb943a ]

The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.

With this change in place, sensors(1) and ethtool -m agree:

sff2-isa-0000
Adapter: ISA adapter
in0:          +3.23 V
temp1:        +33.1 C
power1:      270.00 uW
power2:      200.00 uW
curr1:        +0.01 A

        Laser output power                        : 0.2743 mW / -5.62 dBm
        Receiver signal average optical power     : 0.2014 mW / -6.96 dBm

Reported-by: chris.healy@zii.aero
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ]

Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.

The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.

The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.

However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.

Fix the issue by removing the bit inverts in the csum_partial calculation.

The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.

Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc599 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 071c37983d99da07797294ea78e9da1a6e287144 ]

Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:

[   32.465295] NEIGH: BUG, double timer add, state is 8
[   32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65
[   32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   32.465313] Call Trace:
[   32.465318]  dump_stack+0x7c/0xc0
[   32.465323]  __neigh_event_send+0x20c/0x880
[   32.465326]  ? ___neigh_create+0x846/0xfb0
[   32.465329]  ? neigh_lookup+0x2a9/0x410
[   32.465332]  ? neightbl_fill_info.constprop.0+0x800/0x800
[   32.465334]  neigh_add+0x4f8/0x5e0
[   32.465337]  ? neigh_xmit+0x620/0x620
[   32.465341]  ? find_held_lock+0x85/0xa0
[   32.465345]  rtnetlink_rcv_msg+0x204/0x570
[   32.465348]  ? rtnl_dellink+0x450/0x450
[   32.465351]  ? mark_held_locks+0x90/0x90
[   32.465354]  ? match_held_lock+0x1b/0x230
[   32.465357]  netlink_rcv_skb+0xc4/0x1d0
[   32.465360]  ? rtnl_dellink+0x450/0x450
[   32.465363]  ? netlink_ack+0x420/0x420
[   32.465366]  ? netlink_deliver_tap+0x115/0x560
[   32.465369]  ? __alloc_skb+0xc9/0x2f0
[   32.465372]  netlink_unicast+0x270/0x330
[   32.465375]  ? netlink_attachskb+0x2f0/0x2f0
[   32.465378]  netlink_sendmsg+0x34f/0x5a0
[   32.465381]  ? netlink_unicast+0x330/0x330
[   32.465385]  ? move_addr_to_kernel.part.0+0x20/0x20
[   32.465388]  ? netlink_unicast+0x330/0x330
[   32.465391]  sock_sendmsg+0x91/0xa0
[   32.465394]  ___sys_sendmsg+0x407/0x480
[   32.465397]  ? copy_msghdr_from_user+0x200/0x200
[   32.465401]  ? _raw_spin_unlock_irqrestore+0x37/0x40
[   32.465404]  ? lockdep_hardirqs_on+0x17d/0x250
[   32.465407]  ? __wake_up_common_lock+0xcb/0x110
[   32.465410]  ? __wake_up_common+0x230/0x230
[   32.465413]  ? netlink_bind+0x3e1/0x490
[   32.465416]  ? netlink_setsockopt+0x540/0x540
[   32.465420]  ? __fget_light+0x9c/0xf0
[   32.465423]  ? sockfd_lookup_light+0x8c/0xb0
[   32.465426]  __sys_sendmsg+0xa5/0x110
[   32.465429]  ? __ia32_sys_shutdown+0x30/0x30
[   32.465432]  ? __fd_install+0xe1/0x2c0
[   32.465435]  ? lockdep_hardirqs_off+0xb5/0x100
[   32.465438]  ? mark_held_locks+0x24/0x90
[   32.465441]  ? do_syscall_64+0xf/0x270
[   32.465444]  do_syscall_64+0x63/0x270
[   32.465448]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set
Reported-by: NMarek Majkowski <marek@cloudflare.com>
Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>