Realizing that unicast is just a special case of broadcast, we also see
that we can go in the other direction, i.e., that modest changes to the
current unicast link can make it generic enough to support broadcast.

The following changes are introduced here:

- A new counter ("ackers") in struct tipc_link, to indicate how many
  peers need to ack a packet before it can be released.
- A corresponding counter in the skb user area, to keep track of how
  many peers a are left to ack before a buffer can be released.
- A new counter ("acked"), to keep persistent track of how far a peer
  has acked at the moment, i.e., where in the transmission queue to
  start updating buffers when the next ack arrives. This is to avoid
  double acknowledgements from a peer, with inadvertent relase of
  packets as a result.
- A more generic tipc_link_retrans() function, where retransmit starts
  from a given sequence number, instead of the first packet in the
  transmision queue. This is to minimize the number of retransmitted
  packets on the broadcast media.

When the new functionality is taken into use in the next commits,
we expect it to have minimal effect on unicast mode performance.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast link instance (struct tipc_link) used for sending is
currently aggregated into struct tipc_bclink. This means that we cannot
use the regular tipc_link_create() function for initiating the link, but
do instead have to initiate numerous fields directly from the
bcast_init() function.

We want to reduce dependencies between the broadcast functionality
and the inner workings of tipc_link. In this commit, we introduce
a new function tipc_bclink_create() to link.c, and allocate the
instance of the link separately using this function.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In reality, the link implementation is already independent from
struct tipc_bearer, in that it doesn't store any reference to it.
However, we still pass on a pointer to a bearer instance in the
function tipc_link_create(), just to have it extract some
initialization information from it.

I later commits, we need to create instances of tipc_link without
having any associated struct tipc_bearer. To facilitate this, we
want to extract the initialization data already in the creator
function in node.c, before calling tipc_link_create(), and pass
this info on as individual parameters in the call.

This commit introduces this change.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast transmission link is currently instantiated when the
network subsystem is started, i.e., on order from user space via netlink.

This forces the broadcast transmission code to do unnecessary tests for
the existence of the transmission link, as well in single mode node as
in network mode.

In this commit, we do instead create the link during initialization of
the name space, and remove it when it is stopped. The fact that the
transmission link now has a guaranteed longer life cycle than any of its
potential clients paves the way for further code simplifcations
and optimizations.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The broadcast lock will need to be acquired outside bcast.c in a later
commit. For this reason, we move the lock to struct tipc_net. Consistent
with the changes in the previous commit, we also introducee two new
functions tipc_bcast_lock() and tipc_bcast_unlock(). The code that is
currently using tipc_bclink_lock()/unlock() will be phased out during
the coming commits in this series.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, a number of structure and function definitions related
to the broadcast functionality are unnecessarily exposed in the file
bcast.h. This obscures the fact that the external interface towards
the broadcast link in fact is very narrow, and causes unnecessary
recompilations of other files when anything changes in those
definitions.

In this commit, we move as many of those definitions as is currently
possible to the file bcast.c.

We also rename the structure 'tipc_bclink' to 'tipc_bc_base', both
since the name does not correctly describe the contents of this
struct, and will do so even less in the future, and because we want
to use the term 'link' more appropriately in the functionality
introduced later in this series.

Finally, we rename a couple of functions, such as tipc_bclink_xmit()
and others that will be kept in the future, to include the term 'bcast'
instead.

There are no functional changes in this commit.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the selection of a multipath route to use a flow-based
hash. This more suitable for traffic sensitive to reordering within a
flow (e.g. TCP, L2VPN) and whilst still allowing a good distribution
of traffic given enough flows.

Selection of the path for a multipath route is done using a hash of:
1. Label stack up to MAX_MP_SELECT_LABELS labels or up to and
   including entropy label, whichever is first.
2. 3-tuple of (L3 src, L3 dst, proto) from IPv4/IPv6 header in MPLS
   payload, if present.

Naturally, a 5-tuple hash using L4 information in addition would be
possible and be better in some scenarios, but there is a tradeoff
between looking deeper into the packet to achieve good distribution,
and packet forwarding performance, and I have erred on the side of the
latter as the default.
Signed-off-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for MPLS multipath routes.

Includes following changes to support multipath:
- splits struct mpls_route into 'struct mpls_route + struct mpls_nh'

- 'struct mpls_nh' represents a mpls nexthop label forwarding entry

- moves mpls route and nexthop structures into internal.h

- A mpls_route can point to multiple mpls_nh structs

- the nexthops are maintained as a array (similar to ipv4 fib)

- In the process of restructuring, this patch also consistently changes
  all labels to u8

- Adds support to parse/fill RTA_MULTIPATH netlink attribute for
multipath routes similar to ipv4/v6 fib

- In this patch, the multipath route nexthop selection algorithm
simply returns the first nexthop. It is replaced by a
hash based algorithm from Robert Shearman in the next patch

- mpls_route_update cleanup: remove 'dev' handling in mpls_route_update.
mpls_route_update though implemented to update based on dev, it was
never used that way. And the dev handling gets tricky with multiple
nexthops. Cannot match against any single nexthops dev. So, this patch
removes the unused 'dev' handling in mpls_route_update.

- dead route/path handling will be implemented in a subsequent patch

Example:

$ip -f mpls route add 100 nexthop as 200 via inet 10.1.1.2 dev swp1 \
                nexthop as 700 via inet 10.1.1.6 dev swp2 \
                nexthop as 800 via inet 40.1.1.2 dev swp3

$ip  -f mpls route show
100
        nexthop as to 200 via inet 10.1.1.2  dev swp1
        nexthop as to 700 via inet 10.1.1.6  dev swp2
        nexthop as to 800 via inet 40.1.1.2  dev swp3
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the returned buffer of register_sysctl() is stored into net_header
variable, but net_header is not used after, and compiler maybe
optimise the variable out, and lead kmemleak reported the below warning

	comm "swapper/0", pid 1, jiffies 4294937448 (age 267.270s)
	hex dump (first 32 bytes):
	90 38 8b 01 c0 ff ff ff 00 00 00 00 01 00 00 00 .8..............
	01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
	backtrace:
	[<ffffffc00020f134>] create_object+0x10c/0x2a0
	[<ffffffc00070ff44>] kmemleak_alloc+0x54/0xa0
	[<ffffffc0001fe378>] __kmalloc+0x1f8/0x4f8
	[<ffffffc00028e984>] __register_sysctl_table+0x64/0x5a0
	[<ffffffc00028eef0>] register_sysctl+0x30/0x40
	[<ffffffc00099c304>] net_sysctl_init+0x20/0x58
	[<ffffffc000994dd8>] sock_init+0x10/0xb0
	[<ffffffc0000842e0>] do_one_initcall+0x90/0x1b8
	[<ffffffc000966bac>] kernel_init_freeable+0x218/0x2f0
	[<ffffffc00070ed6c>] kernel_init+0x1c/0xe8
	[<ffffffc000083bfc>] ret_from_fork+0xc/0x50
	[<ffffffffffffffff>] 0xffffffffffffffff <<end check kmemleak>>

Before fix, the objdump result on ARM64:
0000000000000000 <net_sysctl_init>:
   0:   a9be7bfd        stp     x29, x30, [sp,#-32]!
   4:   90000001        adrp    x1, 0 <net_sysctl_init>
   8:   90000000        adrp    x0, 0 <net_sysctl_init>
   c:   910003fd        mov     x29, sp
  10:   91000021        add     x1, x1, #0x0
  14:   91000000        add     x0, x0, #0x0
  18:   a90153f3        stp     x19, x20, [sp,#16]
  1c:   12800174        mov     w20, #0xfffffff4                // #-12
  20:   94000000        bl      0 <register_sysctl>
  24:   b4000120        cbz     x0, 48 <net_sysctl_init+0x48>
  28:   90000013        adrp    x19, 0 <net_sysctl_init>
  2c:   91000273        add     x19, x19, #0x0
  30:   9101a260        add     x0, x19, #0x68
  34:   94000000        bl      0 <register_pernet_subsys>
  38:   2a0003f4        mov     w20, w0
  3c:   35000060        cbnz    w0, 48 <net_sysctl_init+0x48>
  40:   aa1303e0        mov     x0, x19
  44:   94000000        bl      0 <register_sysctl_root>
  48:   2a1403e0        mov     w0, w20
  4c:   a94153f3        ldp     x19, x20, [sp,#16]
  50:   a8c27bfd        ldp     x29, x30, [sp],#32
  54:   d65f03c0        ret
After:
0000000000000000 <net_sysctl_init>:
   0:   a9bd7bfd        stp     x29, x30, [sp,#-48]!
   4:   90000000        adrp    x0, 0 <net_sysctl_init>
   8:   910003fd        mov     x29, sp
   c:   a90153f3        stp     x19, x20, [sp,#16]
  10:   90000013        adrp    x19, 0 <net_sysctl_init>
  14:   91000000        add     x0, x0, #0x0
  18:   91000273        add     x19, x19, #0x0
  1c:   f90013f5        str     x21, [sp,#32]
  20:   aa1303e1        mov     x1, x19
  24:   12800175        mov     w21, #0xfffffff4                // #-12
  28:   94000000        bl      0 <register_sysctl>
  2c:   f9002260        str     x0, [x19,#64]
  30:   b40001a0        cbz     x0, 64 <net_sysctl_init+0x64>
  34:   90000014        adrp    x20, 0 <net_sysctl_init>
  38:   91000294        add     x20, x20, #0x0
  3c:   9101a280        add     x0, x20, #0x68
  40:   94000000        bl      0 <register_pernet_subsys>
  44:   2a0003f5        mov     w21, w0
  48:   35000080        cbnz    w0, 58 <net_sysctl_init+0x58>
  4c:   aa1403e0        mov     x0, x20
  50:   94000000        bl      0 <register_sysctl_root>
  54:   14000004        b       64 <net_sysctl_init+0x64>
  58:   f9402260        ldr     x0, [x19,#64]
  5c:   94000000        bl      0 <unregister_sysctl_table>
  60:   f900227f        str     xzr, [x19,#64]
  64:   2a1503e0        mov     w0, w21
  68:   f94013f5        ldr     x21, [sp,#32]
  6c:   a94153f3        ldp     x19, x20, [sp,#16]
  70:   a8c37bfd        ldp     x29, x30, [sp],#48
  74:   d65f03c0        ret

Add the possible error handle to free the net_header to remove the
kmemleak warning
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add netlink directives and ndo entry to trust VF user.

This controls the special permission of VF user.
The administrator will dedicatedly trust VF user to use some features
which impacts security and/or performance.

The administrator never turn it on unless VF user is fully trusted.

CC: Sy Jong Choi <sy.jong.choi@intel.com>
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Multiple cpus can process duplicates of incoming ACK messages
matching a SYN_RECV request socket. This is a rare event under
normal operations, but definitely can happen.

Only one must win the race, otherwise corruption would occur.

To fix this without adding new atomic ops, we use logic in
inet_ehash_nolisten() to detect the request was present in the same
ehash bucket where we try to insert the new child.

If request socket was not found, we have to undo the child creation.

This actually removes a spin_lock()/spin_unlock() pair in
reqsk_queue_unlink() for the fast path.

Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently adding a new ipv4 address always cause the creation of the
related network route, with default metric. When a host has multiple
interfaces on the same network, multiple routes with the same metric
are created.

If the userspace wants to set specific metric on each routes, i.e.
giving better metric to ethernet links in respect to Wi-Fi ones,
the network routes must be deleted and recreated, which is error-prone.

This patch implements the support for IFA_F_NOPREFIXROUTE for ipv4
address. When an address is added with such flag set, no associated
network route is created, no network route is deleted when
said IP is gone and it's up to the user space manage such route.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Raw sockets with hdrincl enabled can insert ipv6 extension headers
right into the data stream. In case we need to fragment those packets,
we reparse the options header to find the place where we can insert
the fragment header. If the extension headers exceed the link's MTU we
actually cannot make progress in such a case.

Instead of ending up in broken arithmetic or rounding towards 0 and
entering an endless loop in ip6_fragment, just prevent those cases by
aborting early and signal -EMSGSIZE to user space.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If alpha is strictly reduced by alpha >> dctcp_shift_g and if alpha is less
than 1 << dctcp_shift_g, then alpha may never reach zero. For example,
given shift_g=4 and alpha=15, alpha >> dctcp_shift_g yields 0 and alpha
remains 15. The effect isn't noticeable in this case below cwnd=137, but
could gradually drive uncongested flows with leftover alpha down to
cwnd=137. A larger dctcp_shift_g would have a greater effect.

This change causes alpha=15 to drop to 0 instead of being decrementing by 1
as it would when alpha=16. However, it requires one less conditional to
implement since it doesn't have to guard against subtracting 1 from 0U. A
decay of 15 is not unreasonable since an equal or greater amount occurs at
alpha >= 240.
Signed-off-by: NAndrew G. Shewmaker <agshew@gmail.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error condition -EAGAIN, which is signaled by throw routes, tells
the rules framework to walk on searching for next matches. If the walk
ends and we stop walking the rules with the result of a throw route we
have to translate the error conditions to -ENETUNREACH.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While transitioning to netdev based vport we broke OVS
feature which allows user to retrieve tunnel packet egress
information for lwtunnel devices.  Following patch fixes it
by introducing ndo operation to get the tunnel egress info.
Same ndo operation can be used for lwtunnel devices and compat
ovs-tnl-vport devices. So after adding such device operation
we can remove similar operation from ovs-vport.

Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device").
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent fix for the vsock sock_put issue used the wrong
initializer for the transport spin_lock causing an issue when
running with lockdep checking.

Testing: Verified fix on kernel with lockdep enabled.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No driver implements port_fdb_getnext anymore, and port_fdb_dump is
preferred anyway, so remove this function from DSA.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all switch chips support a Get Next operation to iterate on its FDB.
So add a more simple port_fdb_dump function for them.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
adds the RT6_LOOKUP_F_IFACE flag to make device index mismatch fatal if
oif is given. Hajime reported that this change breaks the Mobile IPv6
use case that wants to force the message through one interface yet use
the source address from another interface. Handle this case by only
adding the flag if oif is set and saddr is not set.

Fixes: 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
Cc: Hajime Tazaki <thehajime@gmail.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the vsock vmci_transport driver, sock_put wasn't safe to call
in interrupt context, since that may call the vsock destructor
which in turn calls several functions that should only be called
from process context. This change defers the callling of these
functions  to a worker thread. All these functions were
deallocation of resources related to the transport itself.

Furthermore, an unused callback was removed to simplify the
cleanup.

Multiple customers have been hitting this issue when using
VMware tools on vSphere 2015.

Also added a version to the vmci transport module (starting from
1.0.2.0-k since up until now it appears that this module was
sharing version with vsock that is currently at 1.0.1.0-k).
Reviewed-by: NAditya Asarwade <asarwade@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, NETLINK_LIST_MEMBERSHIPS grabs the netlink table while copying
the membership state to user-space. However, grabing the netlink table is
effectively a write_lock_irq(), and as such we should not be triggering
page-faults in the critical section.

This can be easily reproduced by the following snippet:
    int s = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
    void *p = mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0);
    int r = getsockopt(s, 0x10e, 9, p, (void*)((char*)p + 4092));

This should work just fine, but currently triggers EFAULT and a possible
WARN_ON below handle_mm_fault().

Fix this by reducing locking of NETLINK_LIST_MEMBERSHIPS to a read-side
lock. The write-lock was overkill in the first place, and the read-lock
allows page-faults just fine.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With use of lwtunnel, we can directly call dev_queue_xmit()
rather than calling netdev vport send operation.
Following change make tunnel vport code bit cleaner.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch fixes following sparse warning.
net/openvswitch/flow_netlink.c:583:30: warning: incorrect type in assignment (different base types)
net/openvswitch/flow_netlink.c:583:30:    expected restricted __be16 [usertype] ipv4
net/openvswitch/flow_netlink.c:583:30:    got int

Fixes: 6b26ba3a ("openvswitch: netlink attributes for IPv6 tunneling")
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the addition of support for diagnostic feature, it makes sense to
increase the minor version of the Bluetooth core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Looking at current situation of memory management in 6lowpan receive
function I detected some invalid handling. After calling
lowpan_invoke_rx_handlers we will do a kfree_skb and then NET_RX_DROP on
error handling. We don't do this before, also on
skb_share_check/skb_unshare which might manipulate the reference
counters.

After running some 'grep -r "dev_add_pack" net/' to look how others
packet-layer receive callbacks works I detected that every subsystem do
a kfree_skb, then NET_RX_DROP without calling skb functions which
might manipulate the skb reference counters. This is the reason why we
should do the same here like all others subsystems. I didn't find any
documentation how the packet-layer receive callbacks handle NET_RX_DROP
return values either.

This patch will add a kfree_skb, then NET_RX_DROP handling for the
"trivial checks", in case of skb_share_check/skb_unshare the kfree_skb
call will be done inside these functions.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There are a few places that don't explicitly check the connection
state before calling hci_disconnect(). To make this API do the right
thing take advantage of the new hci_abort_conn() API and also make
sure to only read the clock offset if we're really connected.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Convert the various places mapping connection state to
disconnect/cancel HCI command to use the new hci_abort_conn helper
API.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There are several different places needing to make sure that a
connection gets disconnected or canceled. The exact action needed
depends on the connection state, so centralizing this logic can save
quite a lot of code duplication.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When unpairing the keys stored in hci_dev are removed. If SMP is
ongoing the SMP context will also have references to these keys, so
removing them from the hci_dev lists will make the pointers invalid.
This can result in the following type of crashes:

 BUG: unable to handle kernel paging request at 6b6b6b6b
 IP: [<c11f26be>] __list_del_entry+0x44/0x71
 *pde = 00000000
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in: hci_uart btqca btusb btintel btbcm btrtl hci_vhci rfcomm bluetooth_6lowpan bluetooth
 CPU: 0 PID: 723 Comm: kworker/u5:0 Not tainted 4.3.0-rc3+ #1379
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
 Workqueue: hci0 hci_rx_work [bluetooth]
 task: f19da940 ti: f1a94000 task.ti: f1a94000
 EIP: 0060:[<c11f26be>] EFLAGS: 00010202 CPU: 0
 EIP is at __list_del_entry+0x44/0x71
 EAX: c0088d20 EBX: f30fcac0 ECX: 6b6b6b6b EDX: 6b6b6b6b
 ESI: f4b60000 EDI: c0088d20 EBP: f1a95d90 ESP: f1a95d8c
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
 CR0: 8005003b CR2: 6b6b6b6b CR3: 319e5000 CR4: 00000690
 Stack:
  f30fcac0 f1a95db0 f82dc3e1 f1bfc000 00000000 c106524f f1bfc000 f30fd020
  f1a95dc0 f1a95dd0 f82dcbdb f1a95de0 f82dcbdb 00000067 f1bfc000 f30fd020
  f1a95de0 f1a95df0 f82d1126 00000067 f82d1126 00000006 f30fd020 f1bfc000
 Call Trace:
  [<f82dc3e1>] smp_chan_destroy+0x192/0x240 [bluetooth]
  [<c106524f>] ? trace_hardirqs_on_caller+0x14e/0x169
  [<f82dcbdb>] smp_teardown_cb+0x47/0x64 [bluetooth]
  [<f82dcbdb>] ? smp_teardown_cb+0x47/0x64 [bluetooth]
  [<f82d1126>] l2cap_chan_del+0x5d/0x14d [bluetooth]
  [<f82d1126>] ? l2cap_chan_del+0x5d/0x14d [bluetooth]
  [<f82d40ef>] l2cap_conn_del+0x109/0x17b [bluetooth]
  [<f82d40ef>] ? l2cap_conn_del+0x109/0x17b [bluetooth]
  [<f82c0205>] ? hci_event_packet+0x5b1/0x2092 [bluetooth]
  [<f82d41aa>] l2cap_disconn_cfm+0x49/0x50 [bluetooth]
  [<f82d41aa>] ? l2cap_disconn_cfm+0x49/0x50 [bluetooth]
  [<f82c0228>] hci_event_packet+0x5d4/0x2092 [bluetooth]
  [<c1332c16>] ? skb_release_data+0x6a/0x95
  [<f82ce5d4>] ? hci_send_to_monitor+0xe7/0xf4 [bluetooth]
  [<c1409708>] ? _raw_spin_unlock_irqrestore+0x44/0x57
  [<f82b3bb0>] hci_rx_work+0xf1/0x28b [bluetooth]
  [<f82b3bb0>] ? hci_rx_work+0xf1/0x28b [bluetooth]
  [<c10635a0>] ? __lock_is_held+0x2e/0x44
  [<c104772e>] process_one_work+0x232/0x432
  [<c1071ddc>] ? rcu_read_lock_sched_held+0x50/0x5a
  [<c104772e>] ? process_one_work+0x232/0x432
  [<c1047d48>] worker_thread+0x1b8/0x255
  [<c1047b90>] ? rescuer_thread+0x23c/0x23c
  [<c104bb71>] kthread+0x91/0x96
  [<c14096a7>] ? _raw_spin_unlock_irq+0x27/0x44
  [<c1409d61>] ret_from_kernel_thread+0x21/0x30
  [<c104bae0>] ? kthread_parkme+0x1e/0x1e

To solve the issue, introduce a new smp_cancel_pairing() API that can
be used to clean up the SMP state before touching the hci_dev lists.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For connection parameters that are left around until a disconnection
we should at least clear any auto-connection properties. This way a
new Add Device call is required to re-set them after calling Unpair
Device.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Tom Herbert added SIT support to GRO with commit
19424e05 ("sit: Add gro callbacks to sit_offload"),
later reverted by Herbert Xu.

The problem came because Tom patch was building GRO
packets without proper meta data : If packets were locally
delivered, we would not care.

But if packets needed to be forwarded, GSO engine was not
able to segment individual segments.

With the following patch, we correctly set skb->encapsulation
and inner network header. We also update gso_type.

Tested:

Server :
netserver
modprobe dummy
ifconfig dummy0 8.0.0.1 netmask 255.255.255.0 up
arp -s 8.0.0.100 4e:32:51:04:47:e5
iptables -I INPUT -s 10.246.7.151 -j TEE --gateway 8.0.0.100
ifconfig sixtofour0
sixtofour0 Link encap:IPv6-in-IPv4
          inet6 addr: 2002:af6:798::1/128 Scope:Global
          inet6 addr: 2002:af6:798::/128 Scope:Global
          UP RUNNING NOARP  MTU:1480  Metric:1
          RX packets:411169 errors:0 dropped:0 overruns:0 frame:0
          TX packets:409414 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20319631739 (20.3 GB)  TX bytes:29529556 (29.5 MB)

Client :
netperf -H 2002:af6:798::1 -l 1000 &

Checked on server traffic copied on dummy0 and verify segments were
properly rebuilt, with proper IP headers, TCP checksums...

tcpdump on eth0 shows proper GRO aggregation takes place.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If userspace provides a ct action with no nested mark or label, then the
storage for these fields is zeroed. Later when actions are requested,
such zeroed fields are serialized even though userspace didn't
originally specify them. Fix the behaviour by ensuring that no action is
serialized in this case, and reject actions where userspace attempts to
set these fields with mask=0. This should make netlink marshalling
consistent across deserialization/reserialization.
Reported-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New, related connections are marked as such as part of ovs_ct_lookup(),
but they are not marked as "new" if the commit flag is used. Make this
consistent by setting the "new" flag whenever !nf_ct_is_confirmed(ct).
Reported-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, 0-bits are generated in ct_state where the bit position is
undefined, and matches are accepted on these bit-positions. If userspace
requests to match the 0-value for this bit then it may expect only a
subset of traffic to match this value, whereas currently all packets
will have this bit set to 0. Fix this by rejecting such masks.
Signed-off-by: NJoe Stringer <joestringer@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e520af48 introduced the following bug when setting the
TCP_REPAIR sockoption:

[ 2860.657036] BUG: using __this_cpu_add() in preemptible [00000000] code: daemon/12164
[ 2860.657045] caller is __this_cpu_preempt_check+0x13/0x20
[ 2860.657049] CPU: 1 PID: 12164 Comm: daemon Not tainted 4.2.3 #1
[ 2860.657051] Hardware name: Dell Inc. PowerEdge R210 II/0JP7TR, BIOS 2.0.5 03/13/2012
[ 2860.657054]  ffffffff81c7f071 ffff880231e9fdf8 ffffffff8185d765 0000000000000002
[ 2860.657058]  0000000000000001 ffff880231e9fe28 ffffffff8146ed91 ffff880231e9fe18
[ 2860.657062]  ffffffff81cd1a5d ffff88023534f200 ffff8800b9811000 ffff880231e9fe38
[ 2860.657065] Call Trace:
[ 2860.657072]  [<ffffffff8185d765>] dump_stack+0x4f/0x7b
[ 2860.657075]  [<ffffffff8146ed91>] check_preemption_disabled+0xe1/0xf0
[ 2860.657078]  [<ffffffff8146edd3>] __this_cpu_preempt_check+0x13/0x20
[ 2860.657082]  [<ffffffff817e0bc7>] tcp_xmit_probe_skb+0xc7/0x100
[ 2860.657085]  [<ffffffff817e1e2d>] tcp_send_window_probe+0x2d/0x30
[ 2860.657089]  [<ffffffff817d1d8c>] do_tcp_setsockopt.isra.29+0x74c/0x830
[ 2860.657093]  [<ffffffff817d1e9c>] tcp_setsockopt+0x2c/0x30
[ 2860.657097]  [<ffffffff81767b74>] sock_common_setsockopt+0x14/0x20
[ 2860.657100]  [<ffffffff817669e1>] SyS_setsockopt+0x71/0xc0
[ 2860.657104]  [<ffffffff81865172>] entry_SYSCALL_64_fastpath+0x16/0x75

Since tcp_xmit_probe_skb() can be called from process context, use
NET_INC_STATS() instead of NET_INC_STATS_BH().

Fixes: e520af48 ("tcp: add TCPWinProbe and TCPKeepAlive SNMP counters")
Signed-off-by: NRenato Westphal <renatow@taghos.com.br>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if_nlmsg_size() overestimates the minimum allocation size of netlink
dump request (when called from rtnl_calcit()) or the size of the
message (when called from rtnl_getlink()). This is because
ext_filter_mask is not supported by rtnl_link_get_af_size() and
rtnl_link_get_size().

The over-estimation is significant when at least one netdev has many
VLANs configured (8 bytes for each configured VLAN).

This patch-set "rightsizes" the protocol specific attribute size
calculation by propagating ext_filter_mask to rtnl_link_get_af_size()
and adding this a argument to get_link_af_size op in rtnl_af_ops.

Bridge module already used filtering aware sizing for notifications.
br_get_link_af_size_filtered() is consistent with the modified
get_link_af_size op so it replaces br_get_link_af_size() in br_af_ops.
br_get_link_af_size() becomes unused and thus removed.
Signed-off-by: NRonen Arad <ronen.arad@intel.com>
Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit d999297c ("tipc: reduce locking scope during packet reception")
we altered the packet retransmission function. Since then, when
restransmitting packets, we create a clone of the original buffer
using __pskb_copy(skb, MIN_H_SIZE), where MIN_H_SIZE is the size of
the area we want to have copied, but also the smallest possible TIPC
packet size. The value of MIN_H_SIZE is 24.

Unfortunately, __pskb_copy() also has the effect that the headroom
of the cloned buffer takes the size MIN_H_SIZE. This is too small
for carrying the packet over the UDP tunnel bearer, which requires
a minimum headroom of 28 bytes. A change to just use pskb_copy()
lets the clone inherit the original headroom of 80 bytes, but also
assumes that the copied data area is of at least that size, something
that is not always the case. So that is not a viable solution.

We now fix this by adding a check for sufficient headroom in the
transmit function of udp_media.c, and expanding it when necessary.

Fixes: commit d999297c ("tipc: reduce locking scope during packet reception")
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code for message reassembly is erroneously assuming that
the the first arriving fragment buffer always is linear, and then goes
ahead resetting the fragment list of that buffer in anticipation of
more arriving fragments.

However, if the buffer already happens to be non-linear, we will
inadvertently drop the already attached fragment list, and later
on trig a BUG() in __pskb_pull_tail().

We see this happen when running fragmented TIPC multicast across UDP,
something made possible since
commit d0f91938 ("tipc: add ip/udp media type")

We fix this by not resetting the fragment list when the buffer is non-
linear, and by initiatlizing our private fragment list tail pointer to
the tail of the existing fragment list.

Fixes: commit d0f91938 ("tipc: add ip/udp media type")
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>