Pull btrfs updates from Chris Mason:
 "This has our usual assortment of fixes and cleanups, but the biggest
  change included is Omar Sandoval's free space tree.  It's not the
  default yet, mounting -o space_cache=v2 enables it and sets a readonly
  compat bit.  The tree can actually be deleted and regenerated if there
  are any problems, but it has held up really well in testing so far.

  For very large filesystems (30T+) our existing free space caching code
  can end up taking a huge amount of time during commits.  The new tree
  based code is faster and less work overall to update as the commit
  progresses.

  Omar worked on this during the summer and we'll hammer on it in
  production here at FB over the next few months"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (73 commits)
  Btrfs: fix fitrim discarding device area reserved for boot loader's use
  Btrfs: Check metadata redundancy on balance
  btrfs: statfs: report zero available if metadata are exhausted
  btrfs: preallocate path for snapshot creation at ioctl time
  btrfs: allocate root item at snapshot ioctl time
  btrfs: do an allocation earlier during snapshot creation
  btrfs: use smaller type for btrfs_path locks
  btrfs: use smaller type for btrfs_path lowest_level
  btrfs: use smaller type for btrfs_path reada
  btrfs: cleanup, use enum values for btrfs_path reada
  btrfs: constify static arrays
  btrfs: constify remaining structs with function pointers
  btrfs tests: replace whole ops structure for free space tests
  btrfs: use list_for_each_entry* in backref.c
  btrfs: use list_for_each_entry_safe in free-space-cache.c
  btrfs: use list_for_each_entry* in check-integrity.c
  Btrfs: use linux/sizes.h to represent constants
  btrfs: cleanup, remove stray return statements
  btrfs: zero out delayed node upon allocation
  btrfs: pass proper enum type to start_transaction()
  ...

Pull more networking fixes from David Miller:

 1) Fix brcmfmac build with older gcc, from Arend van Spriel.

 2) IRQ values unintentionally truncated to u8 in mlx5 driver, from
    Doron Tsur.

 3) Fix build warnings wrt tcp cgroup changes, from Geert Uytterhoeven.

 4) Limit deep recursion in ovs stack, from Hannes Frederic Sowa.

 5) at803x phy driver bug fixes from, Martin Blumenstingl.

 6) Fix TSO handling in hns driver, from Daode Huang

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  ovs: limit ovs recursions in ovs_execute_actions to not corrupt stack
  team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
  net: hns: bug fix about hisilicon TSO BD mode
  brcmfmac: fix BRCMF_FW_NVRAM_DEF macro for older gcc compilers
  net: phy: at803x: Add the interrupt register bit definitions
  net: phy: at803x: Clean up duplicate register definitions
  net: phy: at803x: Allow specifying the RGMII RX clock delay via phy mode
  net: phy: at803x: Don't set gbit features for the AR8030 phy
  arm64: bpf: add extra pass to handle faulty codegen
  arm64: insn: remove BUG_ON from codegen
  sctp: the temp asoc's transports should not be hashed/unhashed
  net/mlx5_core: Fix trimming down IRQ number
  tcp_memcontrol: Forward declare cgroup_subsys and mem_cgroup stucts
  batman-adv: Drop immediate orig_node free function
  batman-adv: Drop immediate batadv_hard_iface free function
  batman-adv: Drop immediate neigh_ifinfo free function
  batman-adv: Drop immediate batadv_hardif_neigh_node free function
  batman-adv: Drop immediate batadv_neigh_node free function
  batman-adv: Drop immediate batadv_orig_ifinfo free function
  batman-adv: Avoid recursive call_rcu for batadv_nc_node
  ...

Pull IDE updates from David Miller:
 "Just a few small changes this merge window, marking ops const, printf
  string type fixes, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  drivers/ide: make ide-scan-pci.c driver explicitly non-modular
  ide: constify ide_dma_ops structures
  ide: silence some underflow warnings

Pull RTC updates from Alexandre Belloni:
 "Core:
   - fix module reference count in rtc-proc
   - Replace simple_strtoul by kstrtoul

  New driver:
   - Epson RX8010SJ

  Subsystem wide cleanups:
   - use %ph for short hex dumps
   - constify *_chip_ops structures

  Drivers:
   - abx80x: Microcrystal rv1805 support, alarm support
   - cmos: prevent kernel warning on IRQ flags mismatch
   - s5m: various cleanups
   - rv8803: rx8900 compatibility, small error path fix
   - sunxi: various cleanups
   - lpc32xx: remove irq > NR_IRQS check from probe()
   - imxdi: fix spelling mistake in warning message
   - ds1685: don't try to micromanage sysfs output size
   - da9063: avoid writing undefined data to rtc
   - gemini: Remove unnecessary platform_set_drvdata()
   - efi: add efi_procfs in efi_rtc_ops
   - pcf8523: refuse to write dates later than 2099"

* tag 'rtc-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (24 commits)
  rtc: cmos: prevent kernel warning on IRQ flags mismatch
  rtc: rtc-ds2404: constify ds2404_chip_ops structures
  rtc: s5m: Make register configuration per S2MPS device to remove exceptions
  rtc: s5m: Add separate field for storing auto-cleared mask in register config
  rtc: s5m: Cleanup by removing useless 'rtc' prefix from fields
  rtc: Replace simple_strtoul by kstrtoul
  rtc: abx80x: add alarm support
  rtc: abx80x: Add Microcrystal rv1805 support
  rtc: v3020: constify v3020_chip_ops structures
  rtc: rv8803: Extend compatibility with the rx8900
  rtc: rv8803: fix handling return value of i2c_smbus_read_byte_data
  rtc: Add Epson RX8010SJ RTC driver
  rtc: lpc32xx: remove irq > NR_IRQS check from probe()
  rtc: imxdi: fix spelling mistake in warning message
  rtc: ds1685: don't try to micromanage sysfs output size
  rtc: use %ph for short hex dumps
  rtc: da9063: avoid writing undefined data to rtc
  rtc: sunxi: use of_device_get_match_data
  rtc: sunxi: constify the data_year_param structure
  rtc: sunxi: fix signedness issues
  ...

Pull fbdev updates from Tomi Valkeinen:
 "Summary:

   - pxafb: device-tree support
   - An unsafe kernel parameter 'lockless_register_fb' for debugging
     problems happening while inside the console lock
   - Small miscellaneous fixes & cleanups
   - omapdss: add writeback support functions
   - Separation of omapfb and omapdrm (see below)

  About the separation of omapfb and omapdrm, see

    http://permalink.gmane.org/gmane.comp.video.dri.devel/143151

  for longer story.  The short version:

  omapfb and omapdrm have shared low level drivers (omapdss and panel
  drivers), making further development of omapdrm difficult.  After
  these patches omapfb and omapdrm have their own versions of the
  drivers, which are more or less direct copies for now but will diverge
  soon.

  This also means that omapfb (everything under drivers/video/fbdev/omap2/)
  is now in maintenance mode, and all new development will be done for
  omapdrm (drivers/gpu/drm/omapdrm/)"

* tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits)
  video: fbdev: pxafb: fix out of memory error path
  drm/omap: make omapdrm select OMAP2_DSS
  drm/omap: move omapdss & displays under omapdrm
  omapfb: move vrfb into omapfb
  omapfb: take omapfb's private omapdss into use
  omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_*
  omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP*
  omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h
  omapfb: copy omapdss & displays for omapfb
  omapfb: allow compilation only if DRM_OMAP is disabled
  fbdev: omap2: panel-dpi: simplify gpio setting
  fbdev: omap2: panel-dpi: in .disable first disable backlight then display
  OMAPDSS: DSS: fix a warning message
  video: omapdss: delete unneeded of_node_put
  OMAPDSS: DISPC: Remove boolean comparisons
  OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define
  OMAPDSS: remove extra out == NULL checks
  OMAPDSS: change internal dispc functions to static
  OMAPDSS: make a two dss feat funcs internal to omapdss
  OMAPDSS: remove extra EXPORT_SYMBOLs
  ...

The Kconfig for this support is currently:

config IDEPCI_PCIBUS_ORDER
        bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"

...meaning that it currently is not being built as a module by anyone.
Lets change the initcall to be the equivalent device_initcall, so that
when reading the driver code, there is no doubt it is builtin-only.

Unlike other similar changes, we leave the module.h header to be
included since this code interacts with other drivers and needs to
know what a struct module is.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ide_dma_ops structures are never modified, so declare these as const,
as is already done for the others.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Back in the day we used to just say this code was root only so it was
ok that the bounds checking was sloppy.  These days it annoys static
checkers so we fix it.

In the original code "c > INT_MAX" was never true since "c" was an int.
I am not sure what was intended so I left it alone.  But because I made
"c" unsigned it means we don't have a warning any more.

The second warning is that we cap "i" but allow negatives leading to an
underflow of the ide_disks_chs[] array.  The third set of warnings is
because these values come from the user and we cap most of the upper
bounds but allow negative values.  Negative cylinders doesn't make
sense.

drivers/ide/ide.c:262 ide_set_disk_chs() warn: impossible condition '(c > ((~0 >> 1))) => (s32min-s32max > s32max)'
drivers/ide/ide.c:270 ide_set_disk_chs() warn: check 'ide_disks_chs[i]' for negative offsets 'i' = s32min.  extra = 's32min-19'
drivers/ide/ide.c:271 ide_set_disk_chs() warn: no lower bound on 'h'
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was seen that defective configurations of openvswitch could overwrite
the STACK_END_MAGIC and cause a hard crash of the kernel because of too
many recursions within ovs.

This problem arises due to the high stack usage of openvswitch. The rest
of the kernel is fine with the current limit of 10 (RECURSION_LIMIT).

We use the already existing recursion counter in ovs_execute_actions to
implement an upper bound of 5 recursions.

Cc: Pravin Shelar <pshelar@ovn.org>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <simon.horman@netronome.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't be within an RCU read-side critical section when deleting
VLANs, as underlying drivers might sleep during the hardware operation.
Therefore, replace the RCU critical section with a mutex. This is
consistent with team_vlan_rx_add_vid.

Fixes: 3d249d4c ("net: introduce ethernet teaming device")
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current upstreaming code fails to set the tso_mode register
when initilizes, when processes large size packets, the default 4 bd is
not enough, so this patch initilizes it and set the default value to 8 bds
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With gcc < 4.3 __UNIQUE_ID does not create unique ids with the macro
BRCMF_FW_NVRAM_DEF. Fix this by removing the MODULE_FIRMWARE instance
for the nvram file. This file is not in linux-firmware repo so it may
not be needed anyway. Otherwise consider this as a temporary fix.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NArend van Spriel <aspriel@gmail.com>
Acked-by: NKalle Valo <kvalo@codeaurora.org>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As seen by Julia, the initial allocation memory is not checked anymore
after commit "video: fbdev: pxafb: initial devicetree conversion".
Introduce back the removed test.
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Pull security subsystem updates from James Morris:

 - EVM gains support for loading an x509 cert from the kernel
   (EVM_LOAD_X509), into the EVM trusted kernel keyring.

 - Smack implements 'file receive' process-based permission checking for
   sockets, rather than just depending on inode checks.

 - Misc enhancments for TPM & TPM2.

 - Cleanups and bugfixes for SELinux, Keys, and IMA.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
  selinux: Inode label revalidation performance fix
  KEYS: refcount bug fix
  ima: ima_write_policy() limit locking
  IMA: policy can be updated zero times
  selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
  selinux: export validatetrans decisions
  gfs2: Invalid security labels of inodes when they go invalid
  selinux: Revalidate invalid inode security labels
  security: Add hook to invalidate inode security labels
  selinux: Add accessor functions for inode->i_security
  security: Make inode argument of inode_getsecid non-const
  security: Make inode argument of inode_getsecurity non-const
  selinux: Remove unused variable in selinux_inode_init_security
  keys, trusted: seal with a TPM2 authorization policy
  keys, trusted: select hash algorithm for TPM2 chips
  keys, trusted: fix: *do not* allow duplicate key options
  tpm_ibmvtpm: properly handle interrupted packet receptions
  tpm_tis: Tighten IRQ auto-probing
  tpm_tis: Refactor the interrupt setup
  tpm_tis: Get rid of the duplicate IRQ probing code
  ...

Pull audit updates from Paul Moore:
 "Seven audit patches for 4.5, all very minor despite the diffstat.

  The diffstat churn for linux/audit.h can be attributed to needing to
  reshuffle the linux/audit.h header to fix the seccomp auditing issue
  (see the commit description for details).

  Besides the seccomp/audit fix, most of the fixes are around trying to
  improve the connection with the audit daemon and a Kconfig
  simplification.  Nothing crazy, and everything passes our little
  audit-testsuite"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: always enable syscall auditing when supported and audit is enabled
  audit: force seccomp event logging to honor the audit_enabled flag
  audit: Delete unnecessary checks before two function calls
  audit: wake up threads if queue switched from limited to unlimited
  audit: include auditd's threads in audit_log_start() wait exception
  audit: remove audit_backlog_wait_overflow
  audit: don't needlessly reset valid wait time

Commit b8d3c4c3 ("mm/huge_memory.c: don't split THP page when
MADV_FREE syscall is called") introduced this new function, but got the
error handling for when pmd_trans_huge_lock() fails wrong.  In the
failure case, the lock has not been taken, and we should not unlock on
the way out.

Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This just fixes a warning on 64-bit builds:

  drivers/gpu/drm/vc4/vc4_validate.c: In function ‘validate_gl_shader_rec’:
  drivers/gpu/drm/vc4/vc4_validate.c:864:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also use them instead of a magic value when enabling the interrupts.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

at803x currently automatically enables the RGMII TX clock delay when the
phy interface mode is PHY_INTERFACE_MODE_RGMII_TXID. The same should be
done when PHY_INTERFACE_MODE_RGMII_ID is specified.
Use a similar logic to enable the RGMII RX clock delay as well.
at803x_context_{save,restore} were not touched because these are only
used on AR8030 which is a RMII phy (RGMII clock delays are irrelevant).
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 8030 is only a "RMII Fast Ethernet PHY", thus it must not have the
SUPPORTED_1000* bits set.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code generation functions in arch/arm64/kernel/insn.c previously
BUG_ON invalid parameters. Following change of that behavior, now we
need to handle the error case where AARCH64_BREAK_FAULT is returned.

Instead of error-handling on every emit() in JIT, we add a new
validation pass at the end of JIT compilation. There's no point in
running JITed code at run-time only to trap due to AARCH64_BREAK_FAULT.
Instead, we drop this failed JIT compilation and allow the system to
gracefully fallback on the BPF interpreter.
Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com>
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During code generation, we used to BUG_ON unknown/unsupported encoding
or invalid parameters.

Instead, now we report these as errors and simply return the
instruction AARCH64_BREAK_FAULT. Users of these codegen helpers should
check for and handle this failure condition as appropriate.

Otherwise, unhandled codegen failure will result in trapping at
run-time due to AARCH64_BREAK_FAULT, which is arguably better than a
BUG_ON.
Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Re-establish the previous behavior and avoid hashing temporary asocs by
checking t->asoc->temp in sctp_(un)hash_transport. Also, remove the
check of t->asoc->temp in __sctp_lookup_association, since they are
never hashed now.

Fixes: 4f008781 ("sctp: apply rhashtable api to send/recv path")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reported-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.5.  I don't think I've missed
  anything too major, I'm mostly back at work now but I'll probably get
  some sleep in 5 years time.

  Summary:

  New drivers:
   - etnaviv:

     GPU driver for the 3D core on the Vivante core used in numerous
     ARM boards.

  Highlights:

  Core:
   - Atomic suspend/resume helpers
   - Move the headers to using userspace friendlier types.
   - Documentation updates
   - Lots of struct_mutex removal.
   - Bunch of DP MST fixes from AMD.

  Panel:
   - More DSI helpers
   - Support for some new basic panels

  i915:
   - Basic Kabylake support
   - DP link training and detect code refactoring
   - fbc/psr fixes
   - FIFO underrun fixes
   - SDE interrupt handling fixes
   - dma-buf/fence support in pageflip path.
   - GPU side for MST audio support

  radeon/amdgpu:
   - Drop UMS support
   - GPUVM/Scheduler optimisations
   - Initial Powerplay support for Tonga/Fiji/CZ/ST
   - ACP audio prerequisites

  nouveau:
   - GK20a instmem improvements
   - PCIE link speed change support

  msm:
   - DSI support for msm8960/apq8064

  tegra:
   - Host1X support for Tegra210 SoC

  vc4:
   - 3D acceleration support

  armada:
   - Get rid of struct mutex

  tda998x:
   - Atomic modesetting support
   - TMDS clock limitations

  omapdrm:
   - Atomic modesetting support
   - improved TILER performance

  rockchip:
   - RK3036 VOP support
   - Atomic modesetting support
   - Synopsys DW MIPI DSI support

  exynos:
   - Runtime PM support
   - of_graph binding for DP panels
   - Cleanup of IPP code
   - Configurable plane support
   - Kernel panic fixes at release time"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/amdgpu: add missing irq.h include
  drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
  drm/vmwgfx: Fix an incorrect lock check
  drm: nouveau: fix nouveau_debugfs_init prototype
  drm/nouveau/pci: fix check in nvkm_pcie_set_link
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/sysfs: use kobj_to_dev()
  ...

Merge tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This 14 patch update:

   - adds a new test for intel_pstate driver
   - adds empty string and async test cases to firmware class tests
   - fixes and cleans up several existing tests"

* tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: firmware: add empty string and async tests
  firmware: actually return NULL on failed request_firmware_nowait()
  test: firmware_class: add asynchronous request trigger
  test: firmware_class: use kstrndup() where appropriate
  test: firmware_class: report errors properly on failure
  selftests/seccomp: fix 32-bit build warnings
  add breakpoints/.gitignore
  add ptrace/.gitignore
  update .gitignore in selftests/timers
  update .gitignore in selftests/vm
  tools, testing, add test for intel_pstate driver
  selftest/ipc: actually test it
  selftests/capabilities: actually test it
  selftests/capabilities: clean up for Makefile

Pull parsic updates from Helge Deller:
 "This patchset includes two major fixes which are both scheduled for
  stable:

  First, __ARCH_SI_PREAMBLE_SIZE was defined with a wrong value.
  Second, huge page pte and TLB changes needed protection with a
  spinlock.  Other than that there are just some trivial optimizations
  and cleanups"

* 'parisc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Protect huge page pte changes with spinlocks
  parisc: Imporove debug info about space registers and TLB configuration
  parisc: Drop parisc-specific NSIGTRAP define
  parisc: Fix __ARCH_SI_PREAMBLE_SIZE
  parisc: Reduce overhead of parisc_requires_coherency()
  parisc: Initialize PCI bridge cache line and default latency

Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next

misc i915 fixes all over the place.

* tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
  drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
  drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
  drm/i915: shut up gen8+ SDE irq dmesg noise, again
  drm/i915: Restore inhibiting the load of the default context
  drm/i915: Tune down rpm wakelock debug checks
  drm/i915: Avoid writing relocs with addresses in non-canonical form
  drm/i915: Move Braswell stop_machine GGTT insertion workaround

Since your main drm-next pull isn't out of the door yet I figured I might
as well flush out drm-misc instead of delaying for 4.6. It's really just
random stuff all over, biggest thing probably connector_mask tracking from
Maarten.

* tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/sysfs: use kobj_to_dev()
  drm/i915: Init power domains early in driver load
  drm: Do not set connector->encoder in drivers
  apple-gmux: Add initial documentation
  drm: move MODULE_PARM_DESC to other file
  drm/edid: index CEA/HDMI mode tables using the VIC
  drm/atomic: Remove drm_atomic_connectors_for_crtc.
  drm/i915: Update connector_mask during readout, v2.
  drm: Remove opencoded drm_gem_object_release_handle()
  drm: Do not set outparam on error during GEM handle allocation
  drm/docs: more leftovers from the big vtable documentation pile
  drm/atomic-helper: Reject legacy flips on a disabled pipe
  drm/atomic: add connector mask to drm_crtc_state.
  drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2.
  drm/atomic: Add __drm_atomic_helper_connector_reset, v2.
  drm/i915: Set connector_state->connector using the helper.
  drm: Use a normal idr allocation for the obj->name
  drm: Only bump object-reference count when adding first handle
  drm: Balance error path for GEM handle allocation
  ...

Merge second patch-bomb from Andrew Morton:

 - more MM stuff:

    - Kirill's page-flags rework

    - Kirill's now-allegedly-fixed THP rework

    - MADV_FREE implementation

    - DAX feature work (msync/fsync).  This isn't quite complete but DAX
      is new and it's good enough and the guys have a handle on what
      needs to be done - I expect this to be wrapped in the next week or
      two.

  - some vsprintf maintenance work

  - various other misc bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (145 commits)
  printk: change recursion_bug type to bool
  lib/vsprintf: factor out %pN[F] handler as netdev_bits()
  lib/vsprintf: refactor duplicate code to special_hex_number()
  printk-formats.txt: remove unimplemented %pT
  printk: help pr_debug and pr_devel to optimize out arguments
  lib/test_printf.c: test dentry printing
  lib/test_printf.c: add test for large bitmaps
  lib/test_printf.c: account for kvasprintf tests
  lib/test_printf.c: add a few number() tests
  lib/test_printf.c: test precision quirks
  lib/test_printf.c: check for out-of-bound writes
  lib/test_printf.c: don't BUG
  lib/kasprintf.c: add sanity check to kvasprintf
  lib/vsprintf.c: warn about too large precisions and field widths
  lib/vsprintf.c: help gcc make number() smaller
  lib/vsprintf.c: expand field_width to 24 bits
  lib/vsprintf.c: eliminate potential race in string()
  lib/vsprintf.c: move string() below widen_string()
  lib/vsprintf.c: pull out padding code from dentry_name()
  printk: do cond_resched() between lines while outputting to consoles
  ...

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for v4.5.

  Notably there are big refactorings mostly by myself, aimed at getting
  the gpio_chip into a shape that makes me believe I can proceed to
  preserve state for a proper userspace ABI (character device) that has
  already been proposed once, but resulted in the feedback that I need
  to go back and restructure stuff.  So I've been restructuring stuff.
  On the way I ran into brokenness (return code from the get_value()
  callback) and had to fix it.  Also, refactored generic GPIO to be
  simpler.

  Some of that is still waiting to trickle down from the subsystems all
  over the kernel that provide random gpio_chips, I've touched every
  single GPIO driver in the kernel now, oh man I didn't know I was
  responsible for so much...

  Apart from that we're churning along as usual.

  I took some effort to test and retest so it should merge nicely and we
  shook out a couple of bugs in -next.

  Infrastructural changes:

   - In struct gpio_chip, rename the .dev node to .parent to better
     reflect the fact that this is not the GPIO struct device
     abstraction.  We will add that soon so this would be totallt
     confusing.

   - It was noted that the driver .get_value() callbacks was sometimes
     reporting negative -ERR values to the gpiolib core, expecting them
     to be propagated to consumer gpiod_get_value() and gpio_get_value()
     calls.  This was not happening, so as there was a mess of drivers
     returning negative errors and some returning "anything else than
     zero" to indicate that a line was active.  As some would have bit
     31 set to indicate "line active" it clashed with negative error
     codes.  This is fixed by the largeish series clamping values in all
     drivers with !!value to [0,1] and then augmenting the code to
     propagate error codes to consumers.  (Includes some ACKed patches
     in other subsystems.)

   - Add a void *data pointer to struct gpio_chip.  The container_of()
     design pattern is indeed very nice, but we want to reform the
     struct gpio_chip to be a non-volative, stateless business, and keep
     states internal to the gpiolib to be able to hold on to the state
     when adding a proper userspace ABI (character device) further down
     the road.  To achieve this, drivers need a handle at the internal
     state that is not dependent on their struct gpio_chip() so we add
     gpiochip_add_data() and gpiochip_get_data() following the pattern
     of many other subsystems.  All the "use gpiochip data pointer"
     patches transforms drivers to this scheme.

   - The Generic GPIO chip header has been merged into the general
     <linux/gpio/driver.h> header, and the custom header for that
     removed.  Instead of having a separate mm_gpio_chip struct for
     these generic drivers, merge that into struct gpio_chip,
     simplifying the code and removing the need for separate and
     confusing includes.

  Misc improvements:

   - Stabilize the way GPIOs are looked up from the ACPI legacy
     specification.

   - Incremental driver features for PXA, PCA953X, Lantiq (patches from
     the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48

  New drivers:

   - Add a GPIO chip to the ALSA SoC AC97 driver.

   - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
     but the branch is merged here too to account for infrastructural
     changes).

   - The sx150x driver now supports the sx1502"

* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
  gpio: generic: make bgpio_pdata always visible
  gpiolib: fix chip order in gpio list
  gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
  gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
  gpio: brcmstb: Allow building driver for BMIPS_GENERIC
  gpio: brcmstb: Set endian flags for big-endian MIPS
  gpio: moxart: fix build regression
  gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
  leds: pca9532: use gpiochip data pointer
  leds: tca6507: use gpiochip data pointer
  hid: cp2112: use gpiochip data pointer
  bcma: gpio: use gpiochip data pointer
  avr32: gpio: use gpiochip data pointer
  video: fbdev: via: use gpiochip data pointer
  gpio: pch: Optimize pch_gpio_get()
  Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
  pinctrl: nsp-gpio: use gpiochip data pointer
  pinctrl: vt8500-wmt: use gpiochip data pointer
  pinctrl: exynos5440: use gpiochip data pointer
  pinctrl: at91-pio4: use gpiochip data pointer
  ...

Pull watchdog updates from Wim Van Sebroeck:
 "This adds following items:

   - watchdog restart handler support
   - watchdog reboot notifier support
   - watchdog sysfs attributes
   - support for the following new devices: AMD Mullins platform, AMD
     Carrizo platform, meson8b SoC, CSRatlas7, TS-4800, Alphascale
     asm9260-wdt, Zodiac, Sigma Designs SMP86xx/SMP87xx
   - Changes in refcounting for the watchdog core
   - watchdog core improvements
   - and small fixes"

* git://www.linux-watchdog.org/linux-watchdog: (60 commits)
  watchdog: asm9260: remove __init and __exit annotations
  watchdog: Drop pointer to watchdog device from struct watchdog_device
  watchdog: ziirave: Use watchdog infrastructure to create sysfs attributes
  watchdog: Add support for creating driver specific sysfs attributes
  watchdog: kill unref/ref ops
  watchdog: stmp3xxx: Remove unused variables
  watchdog: add MT7621 watchdog support
  hwmon: (sch56xx) Drop watchdog driver data reference count callbacks
  watchdog: da9055_wdt: Drop reference counting
  watchdog: da9052_wdt: Drop reference counting
  watchdog: Separate and maintain variables based on variable lifetime
  watchdog: diag288: Stop re-using watchdog core internal flags
  watchdog: Create watchdog device in watchdog_dev.c
  watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device
  watchdog: mena21: Do not use device pointer from struct watchdog_device
  watchdog: gpio: Do not use device pointer from struct watchdog_device
  watchdog: tangox: Print info message using pointer to platform device
  watchdog: bcm2835_wdt: Drop log message if watchdog is stopped
  devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog
  watchdog: add support for Sigma Designs SMP86xx/SMP87xx
  ...

Pull sound updates from Takashi Iwai:
 "We've had quite busy weeks in this cycle.  Looking at ALSA core, the
  significant changes are a few fixes wrt timer and sequencer ioctls
  that have been revealed by fuzzer recently.  Other than that, ASoC
  core got a few updates about DAI link handling, but these are rather
  straightforward refactoring.

  In drivers scene, ASoC received quite lots of new drivers in addition
  to bunch of updates for still ongoing Intel Skylake support and
  topology API.  HD-audio gained a new HDMI/DP hotplug notification via
  component.  FireWire got a pile of code refactoring/updates with
  SCS.1x driver integration.

  More highlights are shown below.

  [ NOTE: this contains also many commits for DRM.  This is due to the
    pull of drm stable branch into sound tree, as the base of i915 audio
    component work for HD-audio.  The highlights below don't contain
    these DRM changes, as these are supposed to be pulled via drm tree
    in anyway sooner or later.  ]

  Core:
   - Handful fixes to harden ALSA timer and sequencer ioctls against
     races reported by syzkaller fuzzer
   - Irq description string can be unique to each card; only for
     HD-audio for now

  ASoC:
   - Conversion of the array of DAI links to a list for supporting
     dynamically adding and removing DAI links
   - Topology API enhancements to make everything more component based
     and being able to specify PCM links via topology
   - Some more fixes for the topology code, though it is still not final
     and ready for enabling in production; we really need to get to the
     point where that can be done
   - A pile of changes for Intel SkyLake drivers which hopefully deliver
     some useful initial functionality for systems with this chipset,
     though there is more work still to come
   - Lots of new features and cleanups for the Renesas drivers
   - ANC support for WM5110
   - New drivers: Imagination Technologies IPs, Atmel class D speaker,
     Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
     RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
   - Rename PCM1792a driver to be generic pcm179x

  HD-Audio:
   - Use audio component for i915 HDMI/DP hotplug handling
   - On-demand binding with i915 driver
   - bdl_pos_adj parameter adjustment for Baytrail controllers
   - Enable power_save_node for CX20722; this shouldn't lead to
     regression, hopefully
   - Kabylake HDMI/DP codec support
   - Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
     machines
   - A few code refactoring

  FireWire:
   - Lots of code cleanup and refactoring
   - Integrate the support of SCS.1x devices into snd-oxfw driver;
     snd-scs1x driver is obsoleted

  USB-audio:
   - Fix possible NULL dereference at disconnection
   - A regression fix for Native Instruments devices

  Misc:
   - A few code cleanups of fm801 driver"

* tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits)
  ALSA: timer: Code cleanup
  ALSA: timer: Harden slave timer list handling
  ALSA: hda - Add fixup for Dell Latitidue E6540
  ALSA: timer: Fix race among timer ioctls
  ALSA: hda - add codec support for Kabylake display audio codec
  ALSA: timer: Fix double unlink of active_list
  ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
  ALSA: hda - fix the headset mic detection problem for a Dell laptop
  ALSA: hda - Fix white noise on Dell Latitude E5550
  ALSA: hda_intel: add card number to irq description
  ALSA: seq: Fix race at timer setup and close
  ALSA: seq: Fix missing NULL check at remove_events ioctl
  ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
  ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
  ASoC: AMD: Add missing include file
  ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
  ALSA: usb: Add native DSD support for Oppo HA-1
  ASoC: Make aux_dev more like a generic component
  ASoC: bcm2835: cleanup includes by ordering them alphabetically
  ASoC: AMD: Manage ACP 2.x SRAM banks power
  ...

Pull documentation updates from Jon Corbet:
 "A relatively boring cycle in the docs tree.  There's a few kernel-doc
  fixes and various document tweaks.

  One patch reaches out of the documentation subtree to fix a comment in
  init/do_mounts_rd.c.  There didn't seem to be anybody more appropriate
  to take that one, so I accepted it"

* tag 'docs-4.5' of git://git.lwn.net/linux: (29 commits)
  thermal: add description for integral_cutoff unit
  Documentation: update libhugetlbfs site url
  Documentation: Explain pci=conf1,conf2 more verbosely
  DMA-API: fix confusing sentence in Documentation/DMA-API.txt
  Documentation: translations: update linux cross reference link
  Documentation: fix typo in CodingStyle
  init, Documentation: Remove ramdisk_blocksize mentions
  Documentation-getdelays: Apply a recommendation from "checkpatch.pl" in main()
  Documentation: HOWTO: update versions from 3.x to 4.x
  Documentation: remove outdated references from translations
  Doc: treewide: Fix grammar "a" to "an"
  Documentation: cpu-hotplug: Fix sysfs mount instructions
  can-doc: Add hint about getting timestamps
  Fix CFQ I/O scheduler parameter name in documentation
  Documentation: arm: remove dead links from Marvell Berlin docs
  Documentation: HOWTO: update code cross reference link
  Doc: Docbook/iio: Fix typo in iio.tmpl
  DocBook: make index.html generation less verbose by default
  DocBook: Cleanup: remove an unused $(call) line
  DocBook: Add a help message for DOCBOOKS env var
  ...

With several ConnectX-4 cards installed on a server, one may receive
irqn > 255 from the kernel API, which we mistakenly trim to 8bit.

This causes EQ creation failure with the following stack trace:
[<ffffffff812a11f4>] dump_stack+0x48/0x64
[<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0
[<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180
[<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core]
[<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core]
[<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core]
[<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core]
[<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core]
[<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0

Fixing it by changing of the irqn type from u8 to unsigned int to
support values > 255

Fixes: 61d0e73e ('net/mlx5_core: Use the the real irqn in eq->irqn')
Reported-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDoron Tsur <doront@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In file included from net/ipv4/tcp_ipv4.c:77 (and many more):
include/net/tcp_memcontrol.h:5: warning: ‘struct cgroup_subsys’ declared inside parameter list
include/net/tcp_memcontrol.h:5: warning: its scope is only this definition or declaration, which is probably not what you want

Add forward declarations for all used structures to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
pull request [net]: batman-adv 20160117

here you have a bunch of patches intended for net.

This patchset is provided by Sven Eckelmann and it is basically
fixing 2 major issues that exist in several parts of the code -
that is why we have 8 patches.

The first bugfix (patch 1 and 2) is preventing call_rcu from
being invoked recursively. This would deceive any user waiting
on rcu_barrier() because the latter won't be able to wait for
the nested invocation thus triggering any sort of undefined
behaviours.

The second bugfix (patches from 3 to 8) prevents the code from
freeing rcu protected objects without waiting for the proper grace
period. This issue can potentially lead to wrong memory access
and thus kernel crashes.

Unfortunately this bogus code pattern was copy/pasted
all around the place when developing new features, therefore
Sven diligently created several patches to address each component
independently.

Given that such bugs were introduced quite some time ago, all
the patches except patch 5 should be considered for submission
to stable.

Included changes:
- avoid recursive invocations of call_rcu() which would fool users waiting on
  rcu_barrier()
- prevent immediate kfree of objects used in rcu protected contexts
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

`recursion_bug' is used as recursion_bug toggle, so make it `bool'.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move switch case to the netdev_features_string() and rename it to
netdev_bits().  In the future we can extend it as needed.

Here we replace the fallback of %pN from '%p' with possible flags to
sticter '0x%p' without any flags variation.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

special_hex_number() is a helper to print a fixed size type in a hex
format with '0x' prefix, zero padding, and small letters.  In the module
we have already several copies of such code.  Consolidate them under
special_hex_number() helper.

There are couple of differences though.

It seems nobody cared about the output in case of CONFIG_KALLSYMS=n,
when printing symbol address, because the asked field width is not
enough to care last 2 characters in the string represantation of the
pointer.  Fixed here.

The %pNF specifier used to be allowed with a specific field width,
though there is neither any user of it nor mention the possibility in
the documentation.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>