We will need EFER.LMA saving to provide unrestricted guest mode. All
what is missing for this is picking up EFER.LMA from VM_ENTRY_CONTROLS
on L2->L1 switches. If the host does not support EFER.LMA saving,
no change is performed, otherwise we properly emulate for L1 what the
hardware does for L0. Advertise the support, depending on the host
feature.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Only interrupt and NMI exiting are mandatory for KVM to work, thus can
be exposed to the guest unconditionally, virtual NMI exiting is
optional. So we must not advertise it unless the host supports it.

Introduce the symbolic constant PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR at
this chance.
Reviewed-by: N: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Properly set those bits to 1 that the spec demands in case bit 55 of
VMX_BASIC is 0 - like in our case.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:

- for pending interrupt, instead of direct injection, we may need
  update architecture specific indicators before resuming to guest.

- A pending interrupt, which is masked by ISR, should be also
  considered in above update action, since hardware will decide
  when to inject it at right time. Current has_interrupt and
  get_interrupt only returns a valid vector from injection p.o.v.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

basically to benefit from apicv, we need to enable virtualized x2apic mode.
Currently, we only enable it when guest is really using x2apic.

Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic:
0x800 - 0x8ff: no read intercept for apicv register virtualization,
               except APIC ID and TMCCT which need software's assistance to
               get right value.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

- APIC read doesn't cause VM-Exit
- APIC write becomes trap-like
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

It's easy to confuse KVM_MEMORY_SLOTS and KVM_MEM_SLOTS_NUM.  One is
the user accessible slots and the other is user + private.  Make this
more obvious.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Bit24 in VMX_EPT_VPID_CAP_MASI is  not used for address-specific invalidation capability
reporting, so remove it from KVM to avoid conflicts in future.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Exporting KVM exit information to userspace to be consumed by perf.
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch handles PCID/INVPCID for guests.

Process-context identifiers (PCIDs) are a facility by which a logical processor
may cache information for multiple linear-address spaces so that the processor
may retain cached information when software switches to a different linear
address space. Refer to section 4.10.1 in IA32 Intel Software Developer's Manual
Volume 3A for details.

For guests with EPT, the PCID feature is enabled and INVPCID behaves as running
natively.
For guests without EPT, the PCID feature is disabled and INVPCID triggers #UD.
Signed-off-by: NJunjie Mao <junjie.mao@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHaitao Shan <haitao.shan@intel.com>
Signed-off-by: NXudong Hao <xudong.hao@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instruction emulation for EOI writes can be skipped, since sane
guest simply uses MOV instead of string operations. This is a nice
improvement when guest doesn't support x2apic or hyper-V EOI
support.

a single VM bandwidth is observed with ~8% bandwidth improvement
(7.4Gbps->8Gbps), by saving ~5% cycles from EOI emulation.
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
<Based on earlier work from>:
Signed-off-by: NEddie Dong <eddie.dong@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds a bunch of tests of the validity of the vmcs12 fields,
according to what the VMX spec and our implementation allows. If fields
we cannot (or don't want to) honor are discovered, an entry failure is
emulated.

According to the spec, there are two types of entry failures: If the problem
was in vmcs12's host state or control fields, the VMLAUNCH instruction simply
fails. But a problem is found in the guest state, the behavior is more
similar to that of an exit.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch implements nested_vmx_vmexit(), called when the nested L2 guest
exits and we want to run its L1 parent and let it handle this exit.

Note that this will not necessarily be called on every L2 exit. L0 may decide
to handle a particular exit on its own, without L1's involvement; In that
case, L0 will handle the exit, and resume running L2, without running L1 and
without calling nested_vmx_vmexit(). The logic for deciding whether to handle
a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(),
will appear in a separate patch below.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

VMX instructions specify success or failure by setting certain RFLAGS bits.
This patch contains common functions to do this, and they will be used in
the following patches which emulate the various VMX instructions.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In certain use-cases, we want to allocate guests fixed time slices where idle
guest cycles leave the machine idling.  There are many approaches to achieve
this but the most direct is to simply avoid trapping the HLT instruction which
lets the guest directly execute the instruction putting the processor to sleep.

Introduce this as a module-level option for kvm-vmx.ko since if you do this
for one guest, you probably want to do it for all.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently the exit is unhandled, so guest halts with error if it tries
to execute INVD instruction. Call into emulator when INVD instruction
is executed by a guest instead. This instruction is not needed by ordinary
guests, but firmware (like OpenBIOS) use it and fail.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.
Signed-off-by: NDexuan Cui <dexuan.cui@intel.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add all-context INVVPID type support.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

According to SDM, we need check whether single-context INVVPID type is supported
before issuing invvpid instruction.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

For the sake of completeness, this patch adds a symbolic
constant for VMX exit reason 0x21 (invalid guest state).
Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Following the new SDM. Now the bit is named "Ignore PAT memory type".
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Before enabling, execution of "rdtscp" in guest would result in #UD.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We don't support these instructions, but guest can execute them even if the
feature('monitor') haven't been exposed in CPUID. So we would trap and inject
a #UD if guest try this way.

Cc: stable@kernel.org
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

New NHM processors will support Pause-Loop Exiting by adding 2 VM-execution
control fields:
PLE_Gap    - upper bound on the amount of time between two successive
             executions of PAUSE in a loop.
PLE_Window - upper bound on the amount of time a guest is allowed to execute in
             a PAUSE loop

If the time, between this execution of PAUSE and previous one, exceeds the
PLE_Gap, processor consider this PAUSE belongs to a new loop.
Otherwise, processor determins the the total execution time of this loop(since
1st PAUSE in this loop), and triggers a VM exit if total time exceeds the
PLE_Window.
* Refer SDM volume 3b section 21.6.13 & 22.1.3.

Pause-Loop Exiting can be used to detect Lock-Holder Preemption, where one VP
is sched-out after hold a spinlock, then other VPs for same lock are sched-in
to waste the CPU time.

Our tests indicate that most spinlocks are held for less than 212 cycles.
Performance tests show that with 2X LP over-commitment we can get +2% perf
improvement for kernel build(Even more perf gain with more LPs).
Signed-off-by: NZhai Edwin <edwin.zhai@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Required for EPT misconfiguration handler.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

"Unrestricted Guest" feature is added in the VMX specification.
Intel Westmere and onwards processors will support this feature.

    It allows kvm guests to run real mode and unpaged mode
code natively in the VMX mode when EPT is turned on. With the
unrestricted guest there is no need to emulate the guest real mode code
in the vm86 container or in the emulator. Also the guest big real mode
code works like native.

  The attached patch enhances KVM to use the unrestricted guest feature
if available on the processor. It also adds a new kernel/module
parameter to disable the unrestricted guest feature at the boot time.
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

VT-x needs an explicit MC vector intercept to handle machine checks in the
hyper visor.

It also has a special option to catch machine checks that happen
during VT entry.

Do these interceptions and forward them to the Linux machine check
handler. Make it always look like user space is interrupted because
the machine check handler treats kernel/user space differently.

Thanks to Jiang Yunhong for help and testing.

Cc: stable@kernel.org
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

So far KVM only had basic x86 debug register support, once introduced to
realize guest debugging that way. The guest itself was not able to use
those registers.

This patch now adds (almost) full support for guest self-debugging via
hardware registers. It refactors the code, moving generic parts out of
SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and
it ensures that the registers are properly switched between host and
guest.

This patch also prepares debug register usage by the host. The latter
will (once wired-up by the following patch) allow for hardware
breakpoints/watchpoints in guest code. If this is enabled, the guest
will only see faked debug registers without functionality, but with
content reflecting the guest's modifications.

Tested on Intel only, but SVM /should/ work as well, but who knows...

Known limitations: Trapping on tss switch won't work - most probably on
Intel.

Credits also go to Joerg Roedel - I used his once posted debugging
series as platform for this patch.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

VMX differentiates between processor and software generated exceptions
when injecting them into the guest. Extend vmx_queue_exception
accordingly (and refactor related constants) so that we can use this
service reliably for the new guest debugging framework.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Those definitions will be used by code outside KVM, so move it outside
of a KVM-specific source file.

Those definitions are used only on kvm/vmx.c, that already includes
asm/vmx.h, so they can be moved safely.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

vmx.h will be used by core code that is independent of KVM, so I am
moving it outside the arch/x86/kvm directory.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

PCI device assignment would map guest MMIO spaces as separate slot, so it is
possible that the device has more than 2 MMIO spaces and overwrite current
private memslot.

The patch move private memory slot to the top of userspace visible memory slots.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

GUEST_PAT support is a new feature introduced by Intel Core i7 architecture.
With this, cpu would save/load guest and host PAT automatically, for EPT memory
type in guest depends on MSR_IA32_CR_PAT.

Also add save/restore for MSR_IA32_CR_PAT.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>