When some interrupts happen together, we need to process every interrupt
one-by-one, and should not return immediately when one interrupt process
is finished being processed.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch provides fixes for the following issues:

1. Fix issue of controller reset required to send commands. For reset
   process, it may be required to send commands to the controller, but
   not during soft reset.  So add HISI_SAS_NOT_ACCEPT_CMD_BIT to prevent
   executing a task during this period.

2. Send a broadcast event in rescan topology to detect any topology
   changes during reset.

3. Previously it was not ensured that libsas has processed the PHY up
   and down events after reset. Potentially this could cause an issue
   that we still process the PHY event after reset. So resolve this by
   flushing shot workqueue in LLDD reset.

4. Port ID requires refresh after reset. The port ID generated after
   reset is not guaranteed to be the same as before reset, so it needs
   to be refreshed for each device's ITCT.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver’s PCI IDs to match the latest Microsemi controllers
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add PQI reset to driver shutdown callback to work around controller bug.

During an 1.) OS shutdown or 2.) kexec outside of a kdump, the Linux
kernel will clear BME on our controller.

If BME is cleared during a controller/host PCIe transfer, the controller
will lock up.

So we perform a PQI reset in the driver's shutdown callback function to
eliminate the possibility of a controller/host PCIe transfer being
active when the kernel clears BME immediately after calling the driver's
shutdown callback.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

 - make pass-thru requests bi-directional
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

 - distinguish between shutdown and non-shutdown.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The null check on pHba->channel[chan].device is redundant because
device is an array and hence can never be null. Remove the check.

Detected by CoverityScan, CID#115362 ("Array compared against 0")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The return value of dma_map_single() should be checked by
dma_mapping_error(). However, in function qla26xx_dport_diagnostics(), its
return value is checked against NULL, which could result in failures.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The return value of scsi_host_alloc() should be released by
scsi_host_put(). However, in function mvs_pci_init(), kfree()
is used. This patch replaces kfree() with scsi_host_put() to avoid
possible memory leaks.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In function pm8001_pci_probe(), on errors that the control flow jumps to
label err_out_ha_free, function pm8001_free() is called. In pm8001_free(),
scsi_host_put() is called to release shost, which keeps the return value
of scsi_host_alloc(). After pm8001_free() returns, kfree() is called to
free shost again, resulting in a double free bug. This patch removes
scsi_host_put() from pm8001_free() and explicitly calls scsi_host_put()
to release Scsi_Host in need.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

fix allocate instance->pd_info twice which was introduced by 96188a89.
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Acked-by: NSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After sending a message, always clear esp->msg_out_len. Otherwise,
eh_abort_handler may subsequently fail to send an ABORT TASK SET
message.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If an LLD aborts a task set, it should complete the affected commands
with the appropriate result code. In a couple of cases esp_scsi doesn't
do so.

When the initiator receives an unhandled message, just respond by sending
a MESSAGE REJECT instead of ABORT TASK SET, and thus avoid the issue.

OTOH, a MESSAGE REJECT sent by a target can be taken as an indication
that the initiator messed up somehow. It isn't always possible to abort
correctly, so just fall back on a SCSI bus reset, which will complete the
affected commands with the appropriate result code.

For example, certain Apple (Sony) CD-ROM drives, when the non-existent
LUN 1 is scanned, can't handle the INQUIRY command. The problem is not
detected until the initiator gets a MESSAGE REJECT. Whenever esp_scsi
sees that message, it raises ATN and sends ABORT TASK SET -- but
neglects to complete the failed scmd.

The target then goes into DATA OUT phase (probably bogus), while the ESP
device goes into disconnected mode (surprising, given the bus phase).
The next Transfer Information command from esp_scsi then causes
an Invalid Command interrupt because that command is not valid when in
disconnected mode:

mac_esp: using PDMA for controller 0
mac_esp mac_esp.0: esp0: regs[50f10000:(null)] irq[19]
mac_esp mac_esp.0: esp0: is a ESP236, 16 MHz (ccf=4), SCSI ID 7
scsi host0: esp
scsi 0:0:0:0: Direct-Access     SEAGATE  ST318416N        0010 PQ: 0 ANSI: 3
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: asynchronous
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
scsi 0:0:3:0: CD-ROM            SONY     CD-ROM CDU-8003A 1.9a PQ: 0 ANSI: 2 CCS
scsi target0:0:3: Beginning Domain Validation
scsi target0:0:3: FAST-5 SCSI 2.0 MB/s ST (500 ns, offset 15)
scsi target0:0:3: Domain Validation skipping write tests
scsi target0:0:3: Ending Domain Validation
scsi host0: unexpected IREG 40
scsi host0: Dumping command log
scsi host0: ent[2] CMD val[c2] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[3] CMD val[00] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[4] EVENT val[0d] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[5] EVENT val[03] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0d]
scsi host0: ent[6] CMD val[90] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[03]
scsi host0: ent[7] EVENT val[05] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[03]
scsi host0: ent[8] EVENT val[0d] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[05]
scsi host0: ent[9] CMD val[01] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[10] CMD val[11] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[11] EVENT val[0b] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[12] CMD val[12] sreg[97] seqreg[cc] sreg2[00] ireg[08] ss[00] event[0b]
scsi host0: ent[13] EVENT val[0c] sreg[97] seqreg[cc] sreg2[00] ireg[08] ss[00] event[0b]
scsi host0: ent[14] CMD val[44] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[00] event[0c]
scsi host0: ent[15] CMD val[01] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[16] CMD val[c2] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[17] CMD val[00] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[18] EVENT val[0d] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[19] EVENT val[06] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0d]
scsi host0: ent[20] CMD val[01] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[06]
scsi host0: ent[21] CMD val[10] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[06]
scsi host0: ent[22] CMD val[1a] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[23] CMD val[12] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[24] EVENT val[0d] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[25] EVENT val[09] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[26] CMD val[01] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[27] CMD val[10] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[28] EVENT val[0a] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[29] EVENT val[0d] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[0a]
scsi host0: ent[30] EVENT val[04] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[0d]
scsi host0: ent[31] CMD val[01] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi host0: ent[0] CMD val[90] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi host0: ent[1] EVENT val[05] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi target0:0:3: FAST-5 SCSI 2.0 MB/s ST (500 ns, offset 15)
scsi target0:0:0: asynchronous
sr 0:0:3:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:3:0: Attached scsi generic sg1 type 5

This patch resolves this issue because the bus reset causes the INQUIRY
command to fail earlier, and return the appropriate result code.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch improves readability. There are no functional changes.

Since this touches on a questionable ESP_INTR_DC conditional, add some
commentary to help others who may (as I did) find themselves chasing an
"Invalid Command" error after the device flags this condition.

This cleanup also eliminates a warning from "make W=1":
drivers/scsi/esp_scsi.c: In function 'esp_finish_select':
drivers/scsi/esp_scsi.c:1233:5: warning: variable 'orig_select_state' set but not used [-Wunused-but-set-variable]
  u8 orig_select_state;
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When in MESSAGE IN phase, the ESP device does not automatically
acknowledge each byte that is transferred by PIO. The mac_esp driver
neglects to explicitly ack them, which causes a timeout during messages
larger than one byte (e.g. tag bytes during reconnect). Fix this with an
ESP_CMD_MOK command after each byte.

The MESSAGE IN phase is also different in that each byte transferred
raises ESP_INTR_FDONE. So don't exit the transfer loop for this interrupt,
for this phase.

That resolves the "Reconnect IRQ2 timeout" error on those Macs which use
PIO transfers instead of PDMA. This patch also improves on the weak tests
for unexpected interrupts and phase changes during PIO transfers.
Tested-by: NStan Johnson <userm57@yahoo.com>
Fixes: 02507a80 ("[PATCH] [SCSI] mac_esp: fix PIO mode, take 2")
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Avoid the following warning from "make C=1":

  CHECK   drivers/scsi/mac_esp.c
drivers/scsi/mac_esp.c:357:30: warning: incorrect type in initializer (different address spaces)
drivers/scsi/mac_esp.c:357:30:    expected unsigned char [usertype] *fifo
drivers/scsi/mac_esp.c:357:30:    got void [noderef] <asn:2>*
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add const to bin_attribute structures as they are only passed to the
functions system_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.

Done using Coccinelle.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds early checks to avoid burning CPU cycles on
the assembly of trace entries which would be skipped anyway.

Introduce a static const variable to keep the trace level to check with
debug_level_enabled() in sync with the actual trace emit with
debug_event(). In order not to refactor the SAN tracing too much,
simply use a define instead.

This change is only for the non / semi hot paths,
while the actual (I/O) hot path was already improved earlier:
zfcp_dbf_scsi() is already guarded by its only caller _zfcp_dbf_scsi()
since commit dcd20e23 ("[SCSI] zfcp: Only collect SCSI debug data for
matching trace levels").
zfcp_dbf_hba_fsf_res() is already guarded by its only caller
zfcp_dbf_hba_fsf_response() since commit 2e261af8 ("[SCSI] zfcp: Only
collect FSF/HBA debug data for matching trace levels").
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
[maier@linux.vnet.ibm.com: rebase, reword, default level 3 branch prediction]
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Improves commit 43f60cbd ("[SCSI] zfcp: No automatic port_rescan on
events")
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
[maier@linux.vnet.ibm.com: reword, underscore in description to match sysfs]
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

v2.6.38 commit a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing
for HBA records.")
dropped trace information previously introduced with
v2.6.27 commit c3baa9a2 ("[SCSI] zfcp: Add information about interrupt
to trace.")
but kept and needlessly assigned a now no longer used struct field.
Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
[maier@linux.vnet.ibm.com: reword, added git history]
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA
records.") refactored zfcp_dbf_hba_berr into zfcp_dbf_hba_bit_err
but added the prototype for the latter without removing it for the former.
Suggested-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NMartin Peschke <mpeschke@linux.vnet.ibm.com>
[maier@linux.vnet.ibm.com: re-worded short description for more details]
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Improves commit 250a1352 ("[SCSI] zfcp: Redesign of the debug tracing
for SCSI records.")
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Just to silence sparse. Since zfcp only exists for s390 and
s390 is big endian, this has been working correctly without conversions
and all the new conversions are NOPs so no performance impact.

Nonetheless, use the conversion on the constant expression where possible.

NB: N_Port-IDs have always been handled with hton24 or ntoh24 conversions
because they also convert to / from character array.

Affected common code structs and .fields are:

HOT I/O PATH:
fcp_cmnd .fc_dl
   FCP command: regular SCSI I/O, including DIX case

SEMI-HOT I/O PATH:
fcp_cmnd .fc_dl
   recovery FCP command: task management function (LUN / target reset)
fcp_resp_ext
   FCP response having FCP_SNS_LEN_VAL with .fr_rsp_len .fr_sns_len
   FCP response having FCP_RESID_UNDER with .fr_resid

RECOVERY / DISCOVERY PATHS:
fc_ct_hdr .ct_cmd .ct_mr_size
   zfcp auto port scan [GPN_FT] with fc_gpn_ft_resp.fp_wwpn,
   recovery for returned port [GID_PN] with fc_ns_gid_pn.fn_wwpn,
   get symbolic port name [GSPN],
   register symbolic port name [RSPN] (NPIV only).
fc_els_rscn .rscn_plen
   incoming ELS (RSCN).
fc_els_flogi .fl_wwpn .fl_wwnn
   incoming ELS (PLOGI),
   port open response with .fl_csp.sp_bb_data .fl_cssp[0..3].cp_class,
   FCP channel physical port,
   point-to-point peer (P2P only).
fc_els_logo .fl_n_port_wwn
   incoming ELS (LOGO).
fc_els_adisc .adisc_wwnn .adisc_wwpn
   path test after RSCN for gone target port.

Since v4.10 commit 05de9700 ("linux/types.h: enable endian checks for
all sparse builds"), below sparse endianness reports appear by default.
Previously, one needed to pass argument CF="-D__CHECK_ENDIAN__" to make
as in: $ make C=1 CF="-D__CHECK_ENDIAN__" M=drivers/s390/scsi.

Silenced sparse warnings and one error:

$ make C=1 M=drivers/s390/scsi
...
  CHECK   drivers/s390/scsi/zfcp_dbf.c
drivers/s390/scsi/zfcp_dbf.c:463:22: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_dbf.c:476:28: warning: restricted __be16 degrades to integer
  CC      drivers/s390/scsi/zfcp_dbf.o
...
  CHECK   drivers/s390/scsi/zfcp_fc.c
drivers/s390/scsi/zfcp_fc.c:263:26: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:299:41: warning: incorrect type in argument 2 (different base types)
drivers/s390/scsi/zfcp_fc.c:299:41:    expected unsigned long long [unsigned] [usertype] wwpn
drivers/s390/scsi/zfcp_fc.c:299:41:    got restricted __be64 [usertype] fl_wwpn
drivers/s390/scsi/zfcp_fc.c:309:40: warning: incorrect type in argument 2 (different base types)
drivers/s390/scsi/zfcp_fc.c:309:40:    expected unsigned long long [unsigned] [usertype] wwpn
drivers/s390/scsi/zfcp_fc.c:309:40:    got restricted __be64 [usertype] fl_n_port_wwn
drivers/s390/scsi/zfcp_fc.c:338:31: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:355:24: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:355:24:    expected restricted __be16 [usertype] ct_cmd
drivers/s390/scsi/zfcp_fc.c:355:24:    got unsigned short [unsigned] [usertype] cmd
drivers/s390/scsi/zfcp_fc.c:356:28: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:356:28:    expected restricted __be16 [usertype] ct_mr_size
drivers/s390/scsi/zfcp_fc.c:356:28:    got int
drivers/s390/scsi/zfcp_fc.c:379:36: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:379:36:    expected restricted __be64 [usertype] fn_wwpn
drivers/s390/scsi/zfcp_fc.c:379:36:    got unsigned long long [unsigned] [usertype] wwpn
drivers/s390/scsi/zfcp_fc.c:463:18: warning: restricted __be64 degrades to integer
drivers/s390/scsi/zfcp_fc.c:465:17: warning: cast from restricted __be64
drivers/s390/scsi/zfcp_fc.c:473:20: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:473:20:    expected unsigned long long [unsigned] [usertype] wwnn
drivers/s390/scsi/zfcp_fc.c:473:20:    got restricted __be64 [usertype] fl_wwnn
drivers/s390/scsi/zfcp_fc.c:474:29: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:474:29:    expected unsigned int [unsigned] [usertype] maxframe_size
drivers/s390/scsi/zfcp_fc.c:474:29:    got restricted __be16 [usertype] sp_bb_data
drivers/s390/scsi/zfcp_fc.c:476:30: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:478:30: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:480:30: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:482:30: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:500:28: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:500:28:    expected unsigned long long [unsigned] [usertype] wwnn
drivers/s390/scsi/zfcp_fc.c:500:28:    got restricted __be64 [usertype] adisc_wwnn
drivers/s390/scsi/zfcp_fc.c:502:38: warning: restricted __be64 degrades to integer
drivers/s390/scsi/zfcp_fc.c:541:40: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:541:40:    expected restricted __be64 [usertype] adisc_wwpn
drivers/s390/scsi/zfcp_fc.c:541:40:    got unsigned long long [unsigned] [usertype] port_name
drivers/s390/scsi/zfcp_fc.c:542:40: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fc.c:542:40:    expected restricted __be64 [usertype] adisc_wwnn
drivers/s390/scsi/zfcp_fc.c:542:40:    got unsigned long long [unsigned] [usertype] node_name
drivers/s390/scsi/zfcp_fc.c:669:16: warning: restricted __be16 degrades to integer
drivers/s390/scsi/zfcp_fc.c:696:24: warning: restricted __be64 degrades to integer
drivers/s390/scsi/zfcp_fc.c:699:54: warning: incorrect type in argument 2 (different base types)
drivers/s390/scsi/zfcp_fc.c:699:54:    expected unsigned long long [unsigned] [usertype] <noident>
drivers/s390/scsi/zfcp_fc.c:699:54:    got restricted __be64 [usertype] fp_wwpn
  CC      drivers/s390/scsi/zfcp_fc.o
  CHECK   drivers/s390/scsi/zfcp_fsf.c
drivers/s390/scsi/zfcp_fsf.c:479:34: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fsf.c:479:34:    expected unsigned long long [unsigned] [usertype] port_name
drivers/s390/scsi/zfcp_fsf.c:479:34:    got restricted __be64 [usertype] fl_wwpn
drivers/s390/scsi/zfcp_fsf.c:480:34: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fsf.c:480:34:    expected unsigned long long [unsigned] [usertype] node_name
drivers/s390/scsi/zfcp_fsf.c:480:34:    got restricted __be64 [usertype] fl_wwnn
drivers/s390/scsi/zfcp_fsf.c:506:36: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fsf.c:506:36:    expected unsigned long long [unsigned] [usertype] peer_wwpn
drivers/s390/scsi/zfcp_fsf.c:506:36:    got restricted __be64 [usertype] fl_wwpn
drivers/s390/scsi/zfcp_fsf.c:507:36: warning: incorrect type in assignment (different base types)
drivers/s390/scsi/zfcp_fsf.c:507:36:    expected unsigned long long [unsigned] [usertype] peer_wwnn
drivers/s390/scsi/zfcp_fsf.c:507:36:    got restricted __be64 [usertype] fl_wwnn
drivers/s390/scsi/zfcp_fc.h:269:46: warning: restricted __be32 degrades to integer
drivers/s390/scsi/zfcp_fc.h:270:29: error: incompatible types in comparison expression (different base types)
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This eases crash dump analysis by automatically dissecting these
protocol headers at least somewhat rather than getting a string
interpretation of large unstructured character array buffer fields.

Also, we can get rid of some unnecessary and error-prone type casts.

This change is possible since v2.6.33 commit 4318e08c
("[SCSI] zfcp: Update FCP protocol related code").
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

v2.6.33 commit dbf5dfe9 ("[SCSI] zfcp: Use common code definitions for
FC CT structs") replaced own definitions with common code definitions.
While FC_BA_RJT_UNABLE happens to be defined with the same value 9 as
FC_FS_RJT_UNABL and thus also works, here we should use the latter from
fc_gs.h.
See also its use in libfc's fc_disc_gpn_ft_resp().
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Complements debugging aspects of the otherwise functionally complete
v3.17 commit 9cb78c16 ("scsi: use 64-bit LUNs").

While I don't have access to a target exporting 3 or 4 level LUNs,
I did test it by explicitly attaching a non-existent fake 4 level LUN
by means of zfcp sysfs attribute "unit_add".
In order to see corresponding trace records of otherwise successful
events, we had to increase the trace level of area SCSI and HBA to 6.

$ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_scsi/level
$ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_hba/level

$ echo 0x4011402240334044 > \
  /sys/bus/ccw/drivers/zfcp/0.0.1880/0x50050763031bd327/unit_add

Example output formatted by an updated zfcpdbf from the s390-tools
package interspersed with kernel messages at scsi_logging_level=4605:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : scsla_1
LUN            : 0x4011402240334044
WWPN           : 0x50050763031bd327
D_ID           : 0x00......
Adapter status : 0x5400050b
Port status    : 0x54000001
LUN status     : 0x41000000
Ready count    : 0x00000001
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0x01

scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 1 length 36
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 6
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : fs_norm
Request ID     : 0x<inquiry2-req-id>
Request status : 0x00000010
FSF cmnd       : 0x00000001
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000000
FSF stat qual  : 00000000 00000000 00000000 00000000
Prot stat      : 0x00000001
Prot stat qual : ........ ........ 00000000 00000000
Port handle    : 0x...
LUN handle     : 0x...
|
Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 6
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : rsl_nor
Request ID     : 0x<inquiry2-req-id>
SCSI ID        : 0x00000000
SCSI LUN       : 0x40224011
SCSI LUN high  : 0x40444033 <=======================
SCSI result    : 0x00000000
SCSI retries   : 0x00
SCSI allowed   : 0x03
SCSI scribble  : 0x<inquiry2-req-id>
SCSI opcode    : 12000000 a4000000 00000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000000 00000000
                 00000000 00000000

scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 2 length 164
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0
scsi 2:0:0:4630896905707208721: scsi scan: peripheral device type of 31, \
no device added
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 9cb78c16 ("scsi: use 64-bit LUNs")
Cc: <stable@vger.kernel.org> #3.17+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NJens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

At the default trace level, we only trace unsuccessful events including
FSF responses.

zfcp_dbf_hba_fsf_response() only used protocol status and FSF status to
decide on an unsuccessful response. However, this is only one of multiple
possible sources determining a failed struct zfcp_fsf_req.

An FSF request can also "fail" if its response runs into an ERP timeout
or if it gets dismissed because a higher level recovery was triggered
[trace tags "erscf_1" or "erscf_2" in zfcp_erp_strategy_check_fsfreq()].
FSF requests with ERP timeout are:
FSF_QTCB_EXCHANGE_CONFIG_DATA, FSF_QTCB_EXCHANGE_PORT_DATA,
FSF_QTCB_OPEN_PORT_WITH_DID or FSF_QTCB_CLOSE_PORT or
FSF_QTCB_CLOSE_PHYSICAL_PORT for target ports,
FSF_QTCB_OPEN_LUN, FSF_QTCB_CLOSE_LUN.
One example is slow queue processing which can cause follow-on errors,
e.g. FSF_PORT_ALREADY_OPEN after FSF_QTCB_OPEN_PORT_WITH_DID timed out.
In order to see the root cause, we need to see late responses even if the
channel presented them successfully with FSF_PROT_GOOD and FSF_GOOD.
Example trace records formatted with zfcpdbf from the s390-tools package:

Timestamp      : ...
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : ...
Record ID      : 1
Tag            : fcegpf1
LUN            : 0xffffffffffffffff
WWPN           : 0x<WWPN>
D_ID           : 0x00<D_ID>
Adapter status : 0x5400050b
Port status    : 0x41200000
LUN status     : 0x00000000
Ready count    : 0x00000001
Running count  : 0x...
ERP want       : 0x02				ZFCP_ERP_ACTION_REOPEN_PORT
ERP need       : 0x02				ZFCP_ERP_ACTION_REOPEN_PORT
|
Timestamp      : ...				30 seconds later
Area           : REC
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : ...
Record ID      : 2
Tag            : erscf_2
LUN            : 0xffffffffffffffff
WWPN           : 0x<WWPN>
D_ID           : 0x00<D_ID>
Adapter status : 0x5400050b
Port status    : 0x41200000
LUN status     : 0x00000000
Request ID     : 0x<request_ID>
ERP status     : 0x10000000			ZFCP_STATUS_ERP_TIMEDOUT
ERP step       : 0x0800				ZFCP_ERP_STEP_PORT_OPENING
ERP action     : 0x02				ZFCP_ERP_ACTION_REOPEN_PORT
ERP count      : 0x00
|
Timestamp      : ...				later than previous record
Area           : HBA
Subarea        : 00
Level          : 5	> default level		=> 3	<= default level
Exception      : -
CPU ID         : 00
Caller         : ...
Record ID      : 1
Tag            : fs_qtcb			=> fs_rerr
Request ID     : 0x<request_ID>
Request status : 0x00001010			ZFCP_STATUS_FSFREQ_DISMISSED
						| ZFCP_STATUS_FSFREQ_CLEANUP
FSF cmnd       : 0x00000005
FSF sequence no: 0x...
FSF issued     : ...				> 30 seconds ago
FSF stat       : 0x00000000			FSF_GOOD
FSF stat qual  : 00000000 00000000 00000000 00000000
Prot stat      : 0x00000001			FSF_PROT_GOOD
Prot stat qual : 00000000 00000000 00000000 00000000
Port handle    : 0x...
LUN handle     : 0x00000000
QTCB log length: ...
QTCB log info  : ...

In case of problems detecting that new responses are waiting on the input
queue, we sooner or later trigger adapter recovery due to an FSF request
timeout (trace tag "fsrth_1").
FSF requests with FSF request timeout are:
typically FSF_QTCB_ABORT_FCP_CMND; but theoretically also
FSF_QTCB_EXCHANGE_CONFIG_DATA or FSF_QTCB_EXCHANGE_PORT_DATA via sysfs,
FSF_QTCB_OPEN_PORT_WITH_DID or FSF_QTCB_CLOSE_PORT for WKA ports,
FSF_QTCB_FCP_CMND for task management function (LUN / target reset).
One or more pending requests can meanwhile have FSF_PROT_GOOD and FSF_GOOD
because the channel filled in the response via DMA into the request's QTCB.

In a theroretical case, inject code can create an erroneous FSF request
on purpose. If data router is enabled, it uses deferred error reporting.
A READ SCSI command can succeed with FSF_PROT_GOOD, FSF_GOOD, and
SAM_STAT_GOOD. But on writing the read data to host memory via DMA,
it can still fail, e.g. if an intentionally wrong scatter list does not
provide enough space. Rather than getting an unsuccessful response,
we get a QDIO activate check which in turn triggers adapter recovery.
One or more pending requests can meanwhile have FSF_PROT_GOOD and FSF_GOOD
because the channel filled in the response via DMA into the request's QTCB.
Example trace records formatted with zfcpdbf from the s390-tools package:

Timestamp      : ...
Area           : HBA
Subarea        : 00
Level          : 6	> default level		=> 3	<= default level
Exception      : -
CPU ID         : ..
Caller         : ...
Record ID      : 1
Tag            : fs_norm			=> fs_rerr
Request ID     : 0x<request_ID2>
Request status : 0x00001010			ZFCP_STATUS_FSFREQ_DISMISSED
						| ZFCP_STATUS_FSFREQ_CLEANUP
FSF cmnd       : 0x00000001
FSF sequence no: 0x...
FSF issued     : ...
FSF stat       : 0x00000000			FSF_GOOD
FSF stat qual  : 00000000 00000000 00000000 00000000
Prot stat      : 0x00000001			FSF_PROT_GOOD
Prot stat qual : ........ ........ 00000000 00000000
Port handle    : 0x...
LUN handle     : 0x...
|
Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 3
Exception      : -
CPU ID         : ..
Caller         : ...
Record ID      : 1
Tag            : rsl_err
Request ID     : 0x<request_ID2>
SCSI ID        : 0x...
SCSI LUN       : 0x...
SCSI result    : 0x000e0000			DID_TRANSPORT_DISRUPTED
SCSI retries   : 0x00
SCSI allowed   : 0x05
SCSI scribble  : 0x<request_ID2>
SCSI opcode    : 28...				Read(10)
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000000 00000000
                                         ^^	SAM_STAT_GOOD
                 00000000 00000000

Only with luck in both above cases, we could see a follow-on trace record
of an unsuccesful event following a successful but late FSF response with
FSF_PROT_GOOD and FSF_GOOD. Typically this was the case for I/O requests
resulting in a SCSI trace record "rsl_err" with DID_TRANSPORT_DISRUPTED
[On ZFCP_STATUS_FSFREQ_DISMISSED, zfcp_fsf_protstatus_eval() sets
ZFCP_STATUS_FSFREQ_ERROR seen by the request handler functions as failure].
However, the reason for this follow-on trace was invisible because the
corresponding HBA trace record was missing at the default trace level
(by default hidden records with tags "fs_norm", "fs_qtcb", or "fs_open").

On adapter recovery, after we had shut down the QDIO queues, we perform
unsuccessful pseudo completions with flag ZFCP_STATUS_FSFREQ_DISMISSED
for each pending FSF request in zfcp_fsf_req_dismiss_all().
In order to find the root cause, we need to see all pseudo responses even
if the channel presented them successfully with FSF_PROT_GOOD and FSF_GOOD.

Therefore, check zfcp_fsf_req.status for ZFCP_STATUS_FSFREQ_DISMISSED
or ZFCP_STATUS_FSFREQ_ERROR and trace with a new tag "fs_rerr".

It does not matter that there are numerous places which set
ZFCP_STATUS_FSFREQ_ERROR after the location where we trace an FSF response
early. These cases are based on protocol status != FSF_PROT_GOOD or
== FSF_PROT_FSF_STATUS_PRESENTED and are thus already traced by default
as trace tag "fs_perr" or "fs_ferr" respectively.

NB: The trace record with tag "fssrh_1" for status read buffers on dismiss
all remains. zfcp_fsf_req_complete() handles this and returns early.
All other FSF request types are handled separately and as described above.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 8a36e453 ("[SCSI] zfcp: enhancement of zfcp debug features")
Fixes: 2e261af8 ("[SCSI] zfcp: Only collect FSF/HBA debug data for matching trace levels")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If the FCP_RSP UI has optional parts (FCP_SNS_INFO or FCP_RSP_INFO) and
thus does not fit into the fsp_rsp field built into a SCSI trace record,
trace the full FCP_RSP UI with all optional parts as payload record
instead of just FCP_SNS_INFO as payload and
a 1 byte RSP_INFO_CODE part of FCP_RSP_INFO built into the SCSI record.

That way we would also get the full FCP_SNS_INFO in case a
target would ever send more than
min(SCSI_SENSE_BUFFERSIZE==96, ZFCP_DBF_PAY_MAX_REC==256)==96.

The mandatory part of FCP_RSP IU is only 24 bytes.
PAYload costs at least one full PAY record of 256 bytes anyway.
We cap to the hardware response size which is only FSF_FCP_RSP_SIZE==128.
So we can just put the whole FCP_RSP IU with any optional parts into
PAYload similarly as we do for SAN PAY since v4.9 commit aceeffbb
("zfcp: trace full payload of all SAN records (req,resp,iels)").
This does not cause any additional trace records wasting memory.

Decoded trace records were confusing because they showed a hard-coded
sense data length of 96 even if the FCP_RSP_IU field FCP_SNS_LEN showed
actually less.

Since the same commit, we set pl_len for SAN traces to the full length of a
request/response even if we cap the corresponding trace.
In contrast, here for SCSI traces we set pl_len to the pre-computed
length of FCP_RSP IU considering SNS_LEN or RSP_LEN if valid.
Nonetheless we trace a hardcoded payload of length FSF_FCP_RSP_SIZE==128
if there were optional parts.
This makes it easier for the zfcpdbf tool to format only the relevant
part of the long FCP_RSP UI buffer. And any trailing information is still
available in the payload trace record just in case.

Rename the payload record tag from "fcp_sns" to "fcp_riu" to make the new
content explicit to zfcpdbf which can then pick a suitable field name such
as "FCP rsp IU all:" instead of "Sense info :"
Also, the same zfcpdbf can still be backwards compatible with "fcp_sns".

Old example trace record before this fix, formatted with the tool zfcpdbf
from s390-tools:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 3
Exception      : -
CPU id         : ..
Caller         : 0x...
Record id      : 1
Tag            : rsl_err
Request id     : 0x<request_id>
SCSI ID        : 0x...
SCSI LUN       : 0x...
SCSI result    : 0x00000002
SCSI retries   : 0x00
SCSI allowed   : 0x05
SCSI scribble  : 0x<request_id>
SCSI opcode    : 00000000 00000000 00000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000202 00000000
                                       ^^==FCP_SNS_LEN_VALID
                 00000020 00000000
                 ^^^^^^^^==FCP_SNS_LEN==32
Sense len      : 96 <==min(SCSI_SENSE_BUFFERSIZE,ZFCP_DBF_PAY_MAX_REC)
Sense info     : 70000600 00000018 00000000 29000000
                 00000400 00000000 00000000 00000000
                 00000000 00000000 00000000 00000000<==superfluous
                 00000000 00000000 00000000 00000000<==superfluous
                 00000000 00000000 00000000 00000000<==superfluous
                 00000000 00000000 00000000 00000000<==superfluous

New example trace records with this fix:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 3
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : rsl_err
Request ID     : 0x<request_id>
SCSI ID        : 0x...
SCSI LUN       : 0x...
SCSI result    : 0x00000002
SCSI retries   : 0x00
SCSI allowed   : 0x03
SCSI scribble  : 0x<request_id>
SCSI opcode    : a30c0112 00000000 02000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000a02 00000200
                 00000020 00000000
FCP rsp IU len : 56
FCP rsp IU all : 00000000 00000000 00000a02 00000200
                                       ^^=FCP_RESID_UNDER|FCP_SNS_LEN_VALID
                 00000020 00000000 70000500 00000018
                 ^^^^^^^^==FCP_SNS_LEN
                                   ^^^^^^^^^^^^^^^^^
                 00000000 240000cb 00011100 00000000
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 00000000 00000000
                 ^^^^^^^^^^^^^^^^^==FCP_SNS_INFO

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : lr_okay
Request ID     : 0x<request_id>
SCSI ID        : 0x...
SCSI LUN       : 0x...
SCSI result    : 0x00000000
SCSI retries   : 0x00
SCSI allowed   : 0x05
SCSI scribble  : 0x<request_id>
SCSI opcode    : <CDB of unrelated SCSI command passed to eh handler>
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000100 00000000
                 00000000 00000008
FCP rsp IU len : 32
FCP rsp IU all : 00000000 00000000 00000100 00000000
                                       ^^==FCP_RSP_LEN_VALID
                 00000000 00000008 00000000 00000000
                          ^^^^^^^^==FCP_RSP_LEN
                                   ^^^^^^^^^^^^^^^^^==FCP_RSP_INFO
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 250a1352 ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For problem determination we need to see that we were in scsi_eh
as well as whether and why we were successful or not.

The following commits introduced new early returns without adding
a trace record:

v2.6.35 commit a1dbfddd
("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
on fc_block_scsi_eh() returning != 0 which is FAST_IO_FAIL,

v2.6.30 commit 63caf367
("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
on not having gotten an FSF request after the maximum number of retry
attempts and thus could not issue a TMF and has to return FAILED.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: a1dbfddd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
Fixes: 63caf367 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Without this fix we get SCSI trace records on task management functions
which cannot be correlated to HBA trace records because all fields
related to the FSF request are empty (zero).
Also, the FCP_RSP_IU is missing as well as any sense data if available.

This was caused by v2.6.14 commit 8a36e453 ("[SCSI] zfcp: enhancement
of zfcp debug features") introducing trace records for TMFs but
hard coding NULL for a possibly existing TMF FSF request.
The scsi_cmnd scribble is also zero or unrelated for the TMF request
so it also could not lookup a suitable FSF request from there.

A broken example trace record formatted with zfcpdbf from the s390-tools
package:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : lr_fail
Request ID     : 0x0000000000000000
                   ^^^^^^^^^^^^^^^^ no correlation to HBA record
SCSI ID        : 0x<scsitarget>
SCSI LUN       : 0x<scsilun>
SCSI result    : 0x000e0000
SCSI retries   : 0x00
SCSI allowed   : 0x05
SCSI scribble  : 0x0000000000000000
SCSI opcode    : 2a000017 3bb80000 08000000 00000000
FCP rsp inf cod: 0x00
                   ^^ no TMF response
FCP rsp IU     : 00000000 00000000 00000000 00000000
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 00000000 00000000
                 ^^^^^^^^^^^^^^^^^ no interesting FCP_RSP_IU
Sense len      : ...
^^^^^^^^^^^^^^^^^^^^ no sense data length
Sense info     : ...
^^^^^^^^^^^^^^^^^^^^ no sense data content, even if present

There are some true cases where we really do not have an FSF request:
"rsl_fai" from zfcp_dbf_scsi_fail_send() called for early
returns / completions in zfcp_scsi_queuecommand(),
"abrt_or", "abrt_bl", "abrt_ru", "abrt_ar" from
zfcp_scsi_eh_abort_handler() where we did not get as far,
"lr_nres", "tr_nres" from zfcp_task_mgmt_function() where we're
successful and do not need to do anything because adapter stopped.
For these cases it's correct to pass NULL for fsf_req to _zfcp_dbf_scsi().
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 8a36e453 ("[SCSI] zfcp: enhancement of zfcp debug features")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

v4.9 commit aceeffbb ("zfcp: trace full payload of all SAN records
(req,resp,iels)") fixed trace data loss of 2.6.38 commit 2c55b750
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
necessary for problem determination, e.g. to see the
currently active zone set during automatic port scan.

While it already saves space by not dumping any empty residual entries
of the large successful GPN_FT response (4 pages), there are seldom cases
where the GPN_FT response is unsuccessful and likely does not have
FC_NS_FID_LAST set in fp_flags so we did not cap the trace record.
We typically see such case for an initiator WWPN, which is not in any zone.

Cap unsuccessful responses to at least the actual basic CT_IU response
plus whatever fits the SAN trace record built-in "payload" buffer
just in case there's trailing information
of which we would at least see the existence and its beginning.

In order not to erroneously cap successful responses, we need to swap
calling the trace function and setting the CT / ELS status to success (0).

Example trace record pair formatted with zfcpdbf:

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : fssct_1
Request ID     : 0x<request_id>
Destination ID : 0x00fffffc
SAN req short  : 01000000 fc020000 01720ffc 00000000
                 00000008
SAN req length : 20
|
Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 2
Tag            : fsscth2
Request ID     : 0x<request_id>
Destination ID : 0x00fffffc
SAN resp short : 01000000 fc020000 80010000 00090700
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
SAN resp length: 16384
San resp info  : 01000000 fc020000 80010000 00090700
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]
                 00000000 00000000 00000000 00000000 [trailing info]

The fix saves all but one of the previously associated 64 PAYload trace
record chunks of size 256 bytes each.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: aceeffbb ("zfcp: trace full payload of all SAN records (req,resp,iels)")
Fixes: 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Up until now zfcp would just ignore the FCP_RESID_OVER flag in the FCP
response IU. When this flag is set, it is possible, in regards to the
FCP standard, that the storage-server processes the command normally, up
to the point where data is missing and simply ignores those.

In this case no CHECK CONDITION would be set, and because we ignored the
FCP_RESID_OVER flag we resulted in at least a data loss or even
-corruption as a follow-up error, depending on how the
applications/layers on top behave. To prevent this, we now set the
host-byte of the corresponding scsi_cmnd to DID_ERROR.

Other storage-behaviors, where the same condition results in a CHECK
CONDITION set in the answer, don't need to be changed as they are
handled in the mid-layer already.

Following is an example trace record decoded with zfcpdbf from the
s390-tools package. We forcefully injected a fc_dl which is one byte too
small:

Timestamp      : ...
Area           : SCSI
Subarea        : 00
Level          : 3
Exception      : -
CPU ID         : ..
Caller         : 0x...
Record ID      : 1
Tag            : rsl_err
Request ID     : 0x...
SCSI ID        : 0x...
SCSI LUN       : 0x...
SCSI result    : 0x00070000
                     ^^DID_ERROR
SCSI retries   : 0x..
SCSI allowed   : 0x..
SCSI scribble  : 0x...
SCSI opcode    : 2a000000 00000000 08000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU     : 00000000 00000000 00000400 00000001
                                       ^^fr_flags==FCP_RESID_OVER
                                         ^^fr_status==SAM_STAT_GOOD
                                            ^^^^^^^^fr_resid
                 00000000 00000000

As of now, we don't actively handle to possibility that a response IU
has both flags - FCP_RESID_OVER and FCP_RESID_UNDER - set at once.
Reported-by: NLuke M. Hopkins <lmhopkin@us.ibm.com>
Reviewed-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 553448f6 ("[SCSI] zfcp: Message cleanup")
Fixes: ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter.") (tglx/history.git)
Cc: <stable@vger.kernel.org> #2.6.33+
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since commit db007fc5 ("[SCSI] Command protection operation"),
scsi_eh_prep_cmnd() saves scmd->prot_op and temporarily resets it to
SCSI_PROT_NORMAL.
Other FCP LLDDs such as qla2xxx and lpfc shield their queuecommand()
to only access any of scsi_prot_sg...() if
(scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL).

Do the same thing for zfcp, which introduced DIX support with
commit ef3eb71d ("[SCSI] zfcp: Introduce experimental support for
DIF/DIX").

Otherwise, TUR SCSI commands as part of scsi_eh likely fail in zfcp,
because the regular SCSI command with DIX protection data, that scsi_eh
re-uses in scsi_send_eh_cmnd(), of course still has
(scsi_prot_sg_count() != 0) and so zfcp sends down bogus requests to the
FCP channel hardware.

This causes scsi_eh_test_devices() to have (finish_cmds == 0)
[not SCSI device is online or not scsi_eh_tur() failed]
so regular SCSI commands, that caused / were affected by scsi_eh,
are moved to work_q and scsi_eh_test_devices() itself returns false.
In turn, it unnecessarily escalates in our case in scsi_eh_ready_devs()
beyond host reset to finally scsi_eh_offline_sdevs()
which sets affected SCSI devices offline with the following kernel message:

"kernel: sd H:0:T:L: Device offlined - not ready after error recovery"
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: ef3eb71d ("[SCSI] zfcp: Introduce experimental support for DIF/DIX")
Cc: <stable@vger.kernel.org> #2.6.36+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Better form and cleans remaining warnings.

Found with scripts/coccinelle/misc/boolinit.cocci.
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/s390/scsi/zfcp_aux.c does not contain any miscdevice so the
inclusion of linux/miscdevice.h is unnecessary.

[maier@linux.vnet.ibm.com: just for the records, this is in fact a
 minor missing code cleanup of the following older "feature"
 which also dropped the only former use of a misc device in zfcp:
 commit 663e0890 ("[SCSI] zfcp: remove access control tables
				    interface")
 commit b5dc3c48 ("[SCSI] zfcp: remove access control tables
				    interface (keep sysfs files)")
 commit 1b33ef23 ("zfcp: remove access control tables interface
			     (port leftovers)")]
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>