- 20 8月, 2014 18 次提交
-
-
由 Brian Norris 提交于
The condition "if (irq_status == 0)" already ensures that one half of the ternary ?: is dead. I think this should probably actually be a FAIL, not a PASS. Caught by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Jamie Iles <jamie@jamieiles.com>
-
由 Brian Norris 提交于
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Brian Norris 提交于
These multiplications are done with 32-bit arithmetic, then converted to 64-bit. We should widen the integers first to prevent overflow. This could be a problem for large (>4GB) MTD's. Detected by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
-
由 Brian Norris 提交于
Caught by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Brian Norris 提交于
MTD used to allow compiling out character device support. This was dropped in the following commit, but some of the accompanying logic was never dropped: commit 660685d9 Author: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Date: Thu Mar 14 13:27:40 2013 +0200 mtd: merge mtdchar module with mtdcore The weird logic was flagged by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
-
由 Brian Norris 提交于
There is one theoretical case that could fall through to using an uninitialized value as the return code. Let's give it a value of 0. Untested. Caught by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Brian Norris 提交于
When checking the upper boundary (i.e., whether an address is higher than the maximum size of the MTD), we should be doing an inclusive check (greater or equal). For instance, an address of 16MB (0x1000000) on a 16MB device is invalid. The strengthening of this bounds check is redundant for those which already have a address+length check and ensure that the length is non-zero, but let's just fix them all, for completeness. Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Brian Norris 提交于
The variable 'retries' is never modified, so if the reset operation never is going to complete, we'll get stuck in an infinite loop. It looks like the intention was to decrement 'retries' on every loop. Untested. Caught by Coverity. Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 White Ding 提交于
Do nand reset before write protect check. If we want to check the WP# low or high through STATUS READ and check bit 7, we must reset the device, other operation (eg.erase/program a locked block) can also clear the bit 7 of status register. As we know the status register can be refreshed, if we do some operation to trigger it, for example if we do erase/program operation to one block that is locked, then READ STATUS, the bit 7 of READ STATUS will be 0 indicate the device in write protect, then if we do erase/program operation to another block that is unlocked, the bit 7 of READ STATUS will be 1 indicate the device is not write protect. Suppose we checked the bit 7 of READ STATUS is 0 then judge the WP# is low (write protect), but in this case the WP# maybe high if we do erase/program operation to a locked block, so we must reset the device if we want to check the WP# low or high through STATUS READ and check bit 7. Signed-off-by: NWhite Ding <bpqw@micron.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Samarth Parikh 提交于
Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" This patch is created with reference to the ongoing lkml thread https://lkml.org/lkml/2014/7/15/646 where Andrew Morton wrote: " - puts is presumably faster - puts doesn't go rogue if you accidentally pass it a "%". - this patch would actually make compiled object files few bytes smaller. Perhaps because seq_printf() is a varargs function, forcing the caller to pass args on the stack instead of in registers. " Signed-off-by: NSamarth Parikh <samarthp@ymail.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Masahiro Yamada 提交于
MAP10 command with '0x2000' data sets up a read-ahead/write access. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Wei Yongjun 提交于
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Thomas Petazzoni 提交于
This commit adds the support in the spi-nor driver of the Micron M25PX80 flash, a 8 Mbit SPI flash from Micron. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in <linux/mtd/nand.h>: Warning(..//include/linux/mtd/nand.h:795): No description found for parameter 'ecc' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Wu, Josh 提交于
PMECC can support 512, 1k, 2k, 4k, 8k page size. The driver currently only support 2k page size nand flash. So this patch add support to 512, 1k, 4k and 8k page size nand flash. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Raphaël Poggi 提交于
Some nand with 8k page size like Micron MT29F32G08ABAAAWP need more than 20us. Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Martin Kepplinger 提交于
Use NULL instead of 0 when returning an address. This fixes a sparse warning. Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Dan Carpenter 提交于
We check "cs" for array overflows but we don't check for underflows and it upsets the static checkers. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
- 17 8月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 16 8月, 2014 21 次提交
-
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio由 Linus Torvalds 提交于
Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
-
由 Azael Avalos 提交于
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mario Limonciello 提交于
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: NMario Limonciello <mario_limonciello@dell.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Roald Frederickx 提交于
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: NRoald Frederickx <roald.frederickx@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Martin Kepplinger 提交于
If this is going away, it won't be in 2012. Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-