This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch updates cardlist for Beholder TV tuners:
old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507
and add support for 607, 609, M6 cards with new i2c-ir.
Signed-off-by: NIgor Kuznetsov <igk72@yandex.ru>
Signed-off-by: NAndrey J. Melnikov <temnota@kmv.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

saa7134 were converted to video_ioctl2, but saa7134_empress weren't. This broke
saa7134-empress, since it were dependent of saa7134_common_ioctl.

With the conversion, the module had a size decrease of 436 bytes on x86_64:

   text    data     bss     dec     hex filename
   5196    4912       4   10112    2780 old/saa7134-empress.ko
   4760    4912       4    9676    25cc new/saa7134-empress.ko
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

move some tv-audio initialization code out of tvaudio thread,
and call it on resume too.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Increased size of dev->eedata from 128 to 256, since the Hauppauge data begins
at byte 128.  This has been tested on boards with smaller eeproms, and caused
no problems.

Added comments to distinguish between the various versions of the HVR1110.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

saa7134_buffer_requeue() and set_tvnorm() can become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

make tvaudio thread freezeable, and add proper support for that
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fixes few more problems I found in my saa7134 resume code:

* Race between IRQ handler and .suspend()/.resume() functions

* Removes timeout timers on active buffers - those
	buffers will be recaptured after resume

* Adds suspend/resume for IR code - probably
	necessary if using polling mode

* Adds #ifdef CONFIG_PM overs suspend code

* Runs  a quirk in set_tvnorm in suspend/resume too

* Rearranges the order of calls in saa7134_resume to
	be exactly as in saa7134_initdev thus the card is
	initialized in exactly the same way

* Since DMA audio capture suspend/resume isn't yet supported,
	avoid re-enabling it on resume for now
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

*Disable DMA explictly on suspend
*Enable DMA on resume, after all buffers were configured
*Disable overlay on resume - apps should enable it when X is resumed
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB.

But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB
or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver.

The reference in cx23885.h should just be removed, as the code there needs to
be included if DVB is on or off.  I do not think you can even compile the
cx23885 driver without DVB.  It's clearly just leftover from when the file was
obvious copied from the cx88 driver (which is not mentioned in the copyright
BTW).
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

By "capturing interlaced video" I mean that card ensures that top field
is really top and vice versa (I think it takes the filed ID from signal)
Properly turn on/off that support depending on signal state
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This adds support for suspend/resume for core of saa7134

Should fix bug#7220
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

Add DVB-T support for Avermedia Super 007

Analog television is untested.  The device lacks input adapters for radio,
svideo & composite -- seems to be a DVB-T ONLY device.
Signed-off-by: NEdgar Simo <bobbens@gmail.com>
Acked-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Acked-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Support the 10moons TM300 TV card (so called TV Master 3), which is a
10moons saa7130 based board.  Here not include features for the
IR-remote.
It has been tested using TVTIME.  The card was auto-detected and all the
input sources worked correct with sound.
Signed-off-by: NTony Wan <wankai@sjtu.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Maintainer's notice: I needed to re-number the board, since the board
number conflicted with a patch committed previously.
Signed-off-by: NJames T Klaas <jklaas@appalachian.dyndns.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for the "Elitegroup ECS TVP3XP FM1246", the "KWorld DVB-T
210", and the Animation Technologies LR214 Rev F onwards (SAA7131) to
the saa7134 driver.
Also rename the LR214WF to the LR214 Rev E or ealier (SAA7135), to match
what we've seen on boards in the field.
Changed the comment on the Lifeview cards to indicate Rev E and earlier
versus Rev F and later, together with a chip indicator, following
feedback from Peter Missel <peter.missel@onlinehome.de>.
Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The new name fits to what it is and what is on the box.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There are 2 new entries for p7131 boards and one correction for a board
with LNA.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- use generic sort instead of bubblesort
 - removed useless saa7134_video_fini function
 - small coding style changes
Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

this patch fixes request_module_depend()
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This change supplies a more generic version of the tuner callback.
The tuner struct now has a function pointer
  int (*tuner_callback) (void *dev, int command, int arg)
additionally to a int config parameter.
both can be set through the TUNER_SET_TYPE_ADDR client call.
Note that the meaning of the parameters depend on the tuner type.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains
- new tuning code for the tda827xa silicon tuner.
- controls the preamplifier of some boards with this tuner.
- support for the Philips Tiger S hybrid DVB-T reference design.
- reworked the saa7134-dvb modulue to get rid of most of the
  small board specific functions.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

These entries mainly are to support configurations of the tda827x
silicon tuner with a preamplifier.
The values can be set throgh the attach inform or through
the extended TUNER_SET_TYPE_ADDR client call. The function pointer
will only be updated if the parameter is not NULL.
Since a typecast is necessary to set the pointer, i added a typedef for
this pointer (tuner_gpio_func_t) in tuner.h
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This function allows to set, clear and tristate the GPIO ports.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The out of tree v4l-dvb build system didn't always override the kernel's
configuration settings with v4l-dvb's settings correctly.  To work around
this, makefiles would define some new macro based on the setting of a
config variable.  e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if
CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set.
The v4l-dvb build system should now always override correctly, and this
is no longer necessary.  This patch gets ride of these extra defines and
just uses the CONFIG_* settings directly.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for Terratec Cinergy HT PCI
Signed-off-by: NGiorgio Moscardi <software@sukkology.net>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NJuan Pablo Sormani <sorman@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add a board definition for the Encore ENL-TV card, and
adds its PCI subdevice to the ID table.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Besides adding the board specific code, this patch moves
the RC5 decoding code from bt8xx to ir-functions.c to make it available 
for all drivers.

Signed-off-by: Marc Fargas <telenieko.telenieko.com>
Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@sdl.org: dvb fix]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a hybrid cardbus module. Besides the card support, i 
modified the definition names for AGC and GPIO of the tda10046.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid
Signed-off-by: NThomas Genty <tomlohave@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This board has the same PCI ID as the T200, so the exact board type
is determined from the eeprom.
The original patch was provided by Francis Barber <fedora@barber-family.id.au>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>