- 03 10月, 2008 2 次提交
-
-
由 Pascal Terjan 提交于
Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242Signed-off-by: NPascal Terjan <pterjan@mandriva.com> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Winn 提交于
Commit 22af89aa ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 10月, 2008 2 次提交
-
-
由 Bruce Allan 提交于
Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> CC: arjan@linux.intel.com Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e964455 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: NMike Rapoport <mike@compulab.co.il> Acked-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 10月, 2008 3 次提交
-
-
由 Chandra Seetharaman 提交于
Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 30 9月, 2008 2 次提交
-
-
由 Samuel Ortiz 提交于
map_size was declared from the wrong place. Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
由 Samuel Ortiz 提交于
HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
-
- 29 9月, 2008 3 次提交
-
-
由 Boaz Harrosh 提交于
Boaz writes: "I've reviewed all patches since Matthew's, and I find one small problem. In the load_cmd() there is a compound loop where the first 4 sg's are set then the rest are set into a memory structure in group of 7 sg's. Well the second 7-group and on is a bug because sg pointer does not advance. This is a fall out from Jens's patch." The reporter, Meelis Roos <mroos@ut.ee>, verified that this patch does indeed fix his problem with qlogicpti. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Tejun Heo 提交于
Commit 2fd673ec which tried to remove hardreset for generic accidentally removed it for all flavors as all others were inheriting from nv_generic_ops. This patch reinstates nv_hardreset() and puts it into nv_common_ops which all flavors inherit from. nv_generic_ops now inherits from nv_common_ops and overrides .hardreset to ATA_OP_NULL. While at it, explain why nv_hardreset and ATA_OP_NULL override are necessary. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Boaz Harrosh 提交于
The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: NMeelis Roos <mroos@ut.ee> Cc: David Miller <davem@davemloft.net> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 28 9月, 2008 3 次提交
-
-
由 Tejun Heo 提交于
Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: xerces8 <xerces8@butn.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Remove superfluous two bytes from each string buffer and add proper length format specifiers. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Tested-by: NMark de Wever <koraq@xs4all.nl> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Ralf Baechle 提交于
If things are just right this will result in the hws[0]->parent being passed to ide_host_add() being non-zero and an ooops a little later. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 27 9月, 2008 1 次提交
-
-
由 Aurelien Jarno 提交于
For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763aSigned-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 26 9月, 2008 2 次提交
-
-
由 Jason Wessel 提交于
The tty_find_polling_driver() routine did not correctly check the base part of the tty name. This can lead to kgdboc selecting an incorrect driver, as well as accepting a completely invalid tty such as "echo ffff0 > /sys/module/kgdboc/parameters/kgdboc". Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Roland Dreier 提交于
Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") changed how paths are flushed on an SM event. This change introduces a problem if the path record query triggered by fails, causing path->ah to become NULL. A later successful path query will then trigger WARN_ON() in path_rec_completion(), and crash because path->ah has already been freed, so the ipoib_put_ah() inside the lock in path_rec_completion() may actually drop the last reference (contrary to the comment that claims this is safe). Fix this by updating path->ah and freeing old_ah only when the path record query is successful. This prevents the neighbour AH and that path AH from getting out of sync. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194> Reported-by: NRabah Salem <ravah@mellanox.com> Debugged-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 9月, 2008 1 次提交
-
-
由 Luis R. Rodriguez 提交于
Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan <steven@uplinklabs.net>: 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpASigned-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 9月, 2008 21 次提交
-
-
由 Sven Wegener 提交于
We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Uwe Kleine-Koenig 提交于
__devexit for i2c_powermac_probe is obviously wrong. In the definition of struct platform_driver i2c_powermac_driver the remove function i2c_powermac_remove is wrapped in __devexit_p, so it should be defined using __devexit. Signed-off-by: NUwe Kleine-Koenig <ukleinek@informatik.uni-freiburg.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Alan Stern 提交于
This patch (as1135) essentially reverts the major parts of two earlier patches to usbcore, because they ended up causing a regression. Trying to recover from transient communication errors can lead to other problems, because operations that failed during the error period are not always retried. The simplest example is the initial Set-Config request sent after device enumeration; if it gets lost then it will not be retried and the device will remain unconfigured. This patch restores the old behavior in which any port disconnect or port disable causes the entire device structure to be removed, fixing a reported regression. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Almaroad 提交于
The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: NDavid Almaroad <dalmaroad@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gaetan Carlier 提交于
Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: NGaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
In file included from drivers/usb/musb/musb_core.h:59, from drivers/usb/musb/musb_core.c:108: drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here Cc: Karsten Keil <kkeil@suse.de> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kevin Lloyd 提交于
Add another MC8785 VID/PID Signed-off-by: NKevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Otavio Salvador 提交于
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jaroslav Kysela 提交于
USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Chris Adams 提交于
While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
Fixes: drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup': drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Craig Shelley 提交于
Signed-off-by: NCraig Shelley <craig@microtron.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andreas Bombe 提交于
This hardware needs the pl2303 hack in order to work properly :( Signed-off-by: NAndreas Bombe <aeb@debian.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
As noted by Stefan Neis <Stefan.Neis@kobil.com>, we had a recent regression with EHCI periodic transfers, in some (seemingly not all that common) cases. The root cause was that the schedule activation was only loosely coupled to the addition or removal of transfers, so two different execution contexts could both think they had to deactivate (or conversely activate) the schedule. So this fix tightens that coupling, managing it more like a refcount. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
headers were moved, fixing. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Filip Joelsson 提交于
I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson <filip@blueturtle.nu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This resolves another regression caused by the "use omap_read/write instead of __REG" patch: the hardware address used for DMA to/from the UDC became wrong. Bug noted by Russell King. Reported-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Geoff Levand 提交于
Commit de85422b, 'USB: fix interrupt disabling for HCDs with shared interrupt handlers' changed usb_add_hcd() to strip IRQF_DISABLED from irqflags prior to calling request_irq() with the justification that such a removal was necessary for shared interrupts to work properly. Unfortunately, the change in that commit unconditionally removes the IRQF_DISABLED flag, causing problems on platforms that don't use a shared interrupt but require IRQF_DISABLED. This change adds a check for IRQF_SHARED prior to removing the IRQF_DISABLED flag. Fixes the PS3 system startup hang reported with recent Fedora and OpenSUSE kernels. Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig), as local_irq_enable_in_hardirq() is defined as a null statement for that config. CC: stable <stable@kernel.org> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Stefan Becker <Stefan.Becker@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tony Murray 提交于
I was trying to figure out why my device wasn't supported by the drivers/usb/serial/sierra.c driver, while looking throught the device IDs I spotted what I believe to be a typo in the device IDs. Please apply the following patch If you look down further, there is another HP wireless broadband card, which has a vendor ID of 03f0, like my device. Below is my "lsusb -v -d 03f0:1b1d". Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x03f0 Hewlett-Packard idProduct 0x1b1d bcdDevice 0.01 iManufacturer 1 HP iProduct 2 HP ev2200 1xEV-DO Broadband Wireless Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Data Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 128 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) From: Tony Murray <murraytony@gmail.com> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Richard Nauber 提交于
This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber <RichardNauber@web.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-