[ mingo@elte.hu: fix boot regression. ]
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When acpi=off or there is no SRAT defined, apicid_to_node is got from K8
Northbridge PCI configuration space in k8_scan_nodes() in
arch/x86_64/mm/k8toplogy.c.

The problem is that it assumes bsp apic id is 0 at that point.

For four socket system with Quad core cpus installed, all cpus apic id
is offset by 4, and bsp apic id is 4.

For eight socket system with dual core cpus installed, all cpus apic id
is offset by 2, and bsp apic id is 2.

We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called.

So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

<asm-x86/nops.h> describes certain multibyte instructions as
"generic" nops when in fact they aren't nops at all in 64-bit
mode (missing REX.W causing truncation of a register).

Update the comment to state that K8 or P6 style nops should be
used in 64-bit mode. This matches what the alternatives code does.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Otherwise, enabling (or better, subsequent disabling) of single
stepping would cause a kernel oops on CPUs not having this MSR.

The patch could have been added a conditional to the MSR write in
user_disable_single_step(), but centralizing the updates seems safer
and (looking forward) better manageable.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the x86 native_smp_send_reschedule_function(), don't send the IPI if the
cpu has gone offline already. Warn nevertheless!!
Signed-off-by: NGautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

adds AMD Northbridge config MSR definition
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

adds cpu_has_arch_perfmon to test presence of architectural perfmon on
Intel x86 processor
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJoe Perches <joe@perches.com>

 arch/x86/kernel/reboot.c      |    1 -
 include/asm-x86/elf.h         |    5 ++---
 include/asm-x86/posix_types.h |    8 +-------
 include/asm-x86/processor.h   |    3 +--
 include/asm-x86/unistd.h      |    8 +-------
 5 files changed, 5 insertions(+), 20 deletions(-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix:

  ERROR: do not initialise externals to 0 or NULL
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

otherwise Vmemmap and High Kernel Mapping string is not showing up.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

store initial_apicid from early identify. it is could be different from
phys_proc_id later.

also print it out in /proc/cpuinfo.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

all reboot details are handled in reboot.c and quirks are handled
via reboot_fixups_32.c.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Standardize DEBUG_RODATA, removing special cases for hotplug and kprobes.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: pageexec@freemail.hu
Cc: akpm@linux-foundation.org
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix a memcpy that should be a text_poke (in apply_alternatives).

Use kernel_wp_save/kernel_wp_restore in text_poke to support DEBUG_RODATA
correctly and so the CPU HOTPLUG special case can be removed.

Add text_poke_early, for alternatives and paravirt boot-time and module load
time patching.

Changelog:

- Fix text_set and text_poke alignment check (mixed up bitwise and and or)
- Remove text_set
- Export add_nops, so it can be used by others.
- Document text_poke_early.
- Remove clflush, since it breaks some VIA architectures and is not strictly
  necessary.
- Add kerneldoc to text_poke and text_poke_early.
- Create a second vmap instead of using the WP bit to support Xen and VMI.
- Move local_irq disable within text_poke and text_poke_early to be able to
  be sleepable in these functions.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

for system with apicid lifting, boot cpu apicid will be 4

got:

  CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  CPU: L2 Cache: 512K (64 bytes/line)
  CPU 0/4 -> Node 0
  CPU: Physical Processor ID: 1
  CPU: Processor Core ID: 0

so try to offset apicid back before get phys_proc_id with bits shift.
then we can get correct socket ID

also remove remove cpu_data(0) reference.

because cpu_data(0) only be ready after smp_prepare_cpus with the assignment
from boot_cpu_data to current_cpu_data aka cpu_data(0).

and check_bugs()==>identify_cpu(&boot_cpu_data) is quite before than
smp_prepare_cpus. So just use boot_cpu_id instead.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
   total: 0 errors, 1 warnings, 678 lines checked
After:
   total: 0 errors, 0 warnings, 678 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text	   data	    bss	    dec	    hex	filename
   5333	      0	      4	   5337	   14d9	signal_32.o.before
   5336	      0	      4	   5340	   14dc	signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
   total: 0 errors, 3 warnings, 685 lines checked
After:
   total: 0 errors, 1 warnings, 678 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text	   data	    bss	    dec	    hex	filename
   5333	      0	      4	   5337	   14d9	signal_32.o.before
   5333	      0	      4	   5337	   14d9	signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
   total: 21 errors, 6 warnings, 665 lines checked
After:
   total: 0 errors, 3 warnings, 685 lines checked

No code changed:

arch/x86/kernel/signal_32.o:

   text	   data	    bss	    dec	    hex	filename
   5333	      0	      4	   5337	   14d9	signal_32.o.before
   5333	      0	      4	   5337	   14d9	signal_32.o.after

md5:
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.before.asm
   c279e98012a2808e90cfa2a7787e42a4  signal_32.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

minor coding style cleanups.

Before:
   total: 0 errors, 3 warnings, 479 lines checked
After:
   total: 0 errors, 1 warnings, 483 lines checked

No code changed:

arch/x86/kernel/i387.o:

   text	   data	    bss	    dec	    hex	filename
   2379	      4	      8	   2391	    957	i387.o.before
   2379	      4	      8	   2391	    957	i387.o.after

md5:
   e1434553a3b4ff1f52ad97a68b1fad8a  i387.o.before.asm
   e1434553a3b4ff1f52ad97a68b1fad8a  i387.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add comments to the FPU structures of processor.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is done for smpboot_32.c
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

wraps the busy loop for wait_for_init_deasserted() in a function,
so smp_callin in x86_64 looks like more i386
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

setup_trampoline() looks very similar between architectures, and this
patch unifies them. The i386 version allocates bootmem memory, while
the x86_64 version uses a fixed address.

In this patch, we initialize the global trampoline_base to the x86_64 version,
and i386 allocation can later override it.
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

make setup_trampoline non-static. This way, it won't conflict
with the extern declaration in smp.h
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change voyager's trampoline base to unsigned char *
instead of u32. This way, it won't conflict with
the other architectures when including smp.h
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>