1. 07 5月, 2008 9 次提交
    • L
      Revert "uml: fix gcc problem" · c0a18111
      Linus Torvalds 提交于
      This reverts commit 22eecde2.  Uli
      reports that it breaks UML on x86-64 with the Fedora 8 gcc (gcc 4.1.2),
      causing a crash on startup. See
      
      	http://marc.info/?l=linux-kernel&m=121011722806093&w=2
      
      for a trace.
      Reported-by: NUlrich Drepper <drepper@redhat.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c0a18111
    • O
      Fix bogus warning in sysdev_driver_register() · db176c6e
      OGAWA Hirofumi 提交于
              if ((drv->entry.next != drv->entry.prev) ||
                  (drv->entry.next != NULL)) {
      
      warns list_empty(&drv->entry).
      Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
      Cc: Greg KH <gregkh@suse.de>
      Cc: Len Brown <lenb@kernel.org>
      [ Version 2 totally redone based on suggestions from Linus & Greg ]
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      db176c6e
    • L
      VFS: fix unused variable warning · 6ce07c7b
      Linus Torvalds 提交于
      Commit 33dcdac2 ("kill ->put_inode")
      removed the final use of i_op->put_inode, but left the now totally
      unused "op" variable in iput().
      
      Get rid of it.
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6ce07c7b
    • H
      x86: fix PAE pmd_bad bootup warning · aeed5fce
      Hugh Dickins 提交于
      Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32.
      
      That came from 9fc34113 x86: debug pmd_bad();
      but we understand now that the typecasting was wrong for PAE in the previous
      version: pagetable pages above 4GB looked bad and stopped Arjan from booting.
      
      And revert that cded932b x86: fix pmd_bad
      and pud_bad to support huge pages.  It was the wrong way round: we shouldn't
      weaken every pmd_bad and pud_bad check to let huge pages slip through - in
      part they check that we _don't_ have a huge page where it's not expected.
      
      Put the x86 pmd_bad() and pud_bad() definitions back to what they have long
      been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking
      junk in the upper word is good; and x86_64 should follow x86_32's stricter
      comparison, to stop thinking any subset of required bits is good); but that
      should be a later patch.
      
      Fix Hans' good observation that follow_page() will never find pmd_huge()
      because that would have already failed the pmd_bad test: test pmd_huge in
      between the pmd_none and pmd_bad tests.  Tighten x86's pmd_huge() check?
      No, once it's a hugepage entry, it can get quite far from a good pmd: for
      example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits.
      
      However... though follow_page() contains this and another test for huge
      pages, so it's nice to keep it working on them, where does it actually get
      called on a huge page?  get_user_pages() checks is_vm_hugetlb_page(vma) to
      to call alternative hugetlb processing, as does unmap_vmas() and others.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Earlier-version-tested-by: NIngo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Jeff Chua <jeff.chua.linux@gmail.com>
      Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
      Cc: Arjan van de Ven <arjan@linux.intel.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      aeed5fce
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 · bb78be83
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
        [PATCH] fix SMP ordering hole in fcntl_setlk()
        [PATCH] kill ->put_inode
        [PATCH] fix reservation discarding in affs
      bb78be83
    • A
      [PATCH] fix SMP ordering hole in fcntl_setlk() · 0b2bac2f
      Al Viro 提交于
      fcntl_setlk()/close() race prevention has a subtle hole - we need to
      make sure that if we *do* have an fcntl/close race on SMP box, the
      access to descriptor table and inode->i_flock won't get reordered.
      
      As it is, we get STORE inode->i_flock, LOAD descriptor table entry vs.
      STORE descriptor table entry, LOAD inode->i_flock with not a single
      lock in common on both sides.  We do have BKL around the first STORE,
      but check in locks_remove_posix() is outside of BKL and for a good
      reason - we don't want BKL on common path of close(2).
      
      Solution is to hold ->file_lock around fcheck() in there; that orders
      us wrt removal from descriptor table that preceded locks_remove_posix()
      on close path and we either come first (in which case eviction will be
      handled by the close side) or we'll see the effect of close and do
      eviction ourselves.  Note that even though it's read-only access,
      we do need ->file_lock here - rcu_read_lock() won't be enough to
      order the things.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      0b2bac2f
    • C
      [PATCH] kill ->put_inode · 33dcdac2
      Christoph Hellwig 提交于
      And with that last patch to affs killing the last put_inode instance we
      can finally, after many years of transition kill this racy and awkward
      interface.
      
      (It's kinda funny that even the description in
      Documentation/filesystems/vfs.txt was entirely wrong..)
      
      Also remove a very misleading comment above the defintion of
      struct super_operations.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      33dcdac2
    • R
      [PATCH] fix reservation discarding in affs · dca3c336
      Roman Zippel 提交于
      - remove affs_put_inode, so preallocations aren't discared unnecessarily
        often.
      - remove affs_drop_inode, it's called with a spinlock held, so it can't
        use a mutex.
      - make i_opencnt atomic
      - avoid direct b_count manipulations
      - a few allocation failure fixes, so that these are more gracefully
        handled now.
      Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      dca3c336
    • L
      Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev · 31d9168d
      Linus Torvalds 提交于
      * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (27 commits)
        pata_atiixp: Don't disable
        sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
        sata_inic162x: add cardbus support
        sata_inic162x: kill now unused SFF related stuff
        sata_inic162x: use IDMA for ATAPI commands
        sata_inic162x: use IDMA for non DMA ATA commands
        sata_inic162x: kill now unused bmdma related stuff
        sata_inic162x: use IDMA for ATA_PROT_DMA
        sata_inic162x: update TF read handling
        sata_inic162x: add / update constants
        sata_inic162x: misc clean ups
        sata_mv use hweight16() for bit counting (V2)
        sata_mv NCQ-EH for FIS-based switching
        sata_mv delayed eh handling
        libata: export ata_eh_analyze_ncq_error
        sata_mv new mv_port_intr function
        sata_mv fix mv_host_intr bug for hc_irq_cause
        sata_mv NCQ and SError fixes for mv_err_intr
        sata_mv rearrange mv_config_fbs
        sata_mv errata workaround for sata25 part 1
        ...
      31d9168d
  2. 06 5月, 2008 31 次提交
    • A
      pata_atiixp: Don't disable · 05177f17
      Alan Cox 提交于
      A couple of distributions (Fedora, Ubuntu) were having weird problems with the
      ATI IXP series PATA controllers being reported as simplex.  At the heart of
      the problem is that both distros ignored the recommendations to load pata_acpi
      and ata_generic *AFTER* specific host drivers.
      
      The underlying cause however is that if you D3 and then D0 an ATI IXP it
      helpfully throws away some configuration and won't let you rewrite it.
      
      Add checks to ata_generic and pata_acpi to pin ATIIXP devices.  Possibly the
      real answer here is to quirk them and pin them, but right now we can't do that
      before they've been pcim_enable()'d by a driver.
      
      I'm indebted to David Gero for this.  His bug report not only reported the
      problem but identified the cause correctly and he had tested the right values
      to prove what was going on
      
      [If you backport this for 2.6.24 you will need to pull in the 2.6.25
      removal of the bogus WARN_ON() in pcim_enagle]
      Signed-off-by: NAlan Cox <alan@redhat.com>
      Tested-by: NDavid Gero <davidg@havidave.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      05177f17
    • T
      sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL · 22bfc6d5
      Tejun Heo 提交于
      sata_inic162x is now ready for production use.  Bump the version,
      explain what's working and what's not and drop EXPERIMENTAL.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      22bfc6d5
    • T
      sata_inic162x: add cardbus support · ba66b242
      Tejun Heo 提交于
      When attached to cardbus, mmio region is at BAR 1.  Other than that,
      everything else is the same.  Add support for it.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      ba66b242
    • T
      sata_inic162x: kill now unused SFF related stuff · f8b0685a
      Tejun Heo 提交于
      sata_inic162x now doesn't use any SFF features.  Remove all SFF
      related stuff.
      
      * Mask unsolicited ATA interrupts.  This removes our primary source of
        spurious interrupts and spurious interrupt handling can be tightened
        up.  There's no need to clear ATA interrupts by reading status
        register either.
      
      * Don't dance with IDMA_CTL_ATA_NIEN and simplify accesses to
        IDMA_CTL.
      
      * Inherit from sata_port_ops instead of ata_sff_port_ops.
      
      * Don't initialize or use ioaddr.  There's no need to map BAR0-4
        anymore.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      f8b0685a
    • T
      sata_inic162x: use IDMA for ATAPI commands · b3f677e5
      Tejun Heo 提交于
      Use IDMA for ATAPI commands.  Write and some misc commands time out
      when executed using ATAPI_PROT_DMA but ATAPI_PROT_PIO works fine.  As
      PIO is driven by DMA too, it doesn't make any noticeable difference
      for native SATA devices.  inic_check_atapi_dma() is implemented to
      force PIO for those ATAPI commands.
      
      After this change, sata_inic162x issues all commands using IDMA.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      b3f677e5
    • T
      sata_inic162x: use IDMA for non DMA ATA commands · 049e8e04
      Tejun Heo 提交于
      Use IDMA for PIO and non-data commands.  This allows sata_inic162x to
      safely drive LBA48 devices.  Kill inic_dev_config() which contains
      code to reject LBA48 devices.
      
      With this change, status checking in inic_qc_issue() to avoid hard
      lock up after hotplug can go away too.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      049e8e04
    • T
      sata_inic162x: kill now unused bmdma related stuff · ab5b0235
      Tejun Heo 提交于
      sata_inic162x doesn't use BMDMA anymore.  Kill bmdma related stuff.
      
      * prdctl manipulation
      
      * port IRQ mask manipulation
      
      * inherit ATA_BASE_SHT instead of ATA_BMDMA_SHT
      
      * BMDMA methods
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      ab5b0235
    • T
      sata_inic162x: use IDMA for ATA_PROT_DMA · 3ad400a9
      Tejun Heo 提交于
      The modified driver on initio site has enough clue on how to use IDMA.
      Use IDMA for ATA_PROT_DMA.
      
      * LBA48 now works as long as it uses DMA (LBA48 devices still aren't
        allowed as it can destroy data if PIO is used for any reason).
      
      * No need to mask IRQs for read DMAs as IDMA_DONE is properly raised
        after transfer to memory is actually completed.  There will be some
        spurious interrupts but host_intr will handle it correctly and
        manipulating port IRQ mask interacts badly with the other port for
        some reason, so command type dependent port IRQ masking is not used
        anymore.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      3ad400a9
    • T
      sata_inic162x: update TF read handling · 364fac0e
      Tejun Heo 提交于
      inic162x can't reliably read back TF or at least we don't know how to
      do it yet.  The only values which seem reliable are status and error.
      This patch updates access to TF.
      
      * implement inic_tf_read() which reads the TF area in mmio area
      
      * implement custom inic_qc_fill_rtf() which only returns true if
        status indicates device error.  it'll be returning bogus addresses
        for device errors but it'll be able to report why it failed at
        least.
      
      * implement custom inic_check_ready() and use ata_wait_after_reset()
        instead of the SFF version.
      
      * use inic_tf_read() for classification.
      
      This is not perfect but it fixes hotplug detection failure and at
      least makes the driver report 0's instead of random garbages while
      reporting valid status and error for device errors.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      364fac0e
    • T
      sata_inic162x: add / update constants · b0dd9b8e
      Tejun Heo 提交于
      * add a bunch of constants, most are from the datasheet, a few
        undocumented ones are from initio's modified driver
      
      * HCTL_PWRDWN is bit 12 not 13
      
      This is in preparation of further inic162x updates.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      b0dd9b8e
    • T
      sata_inic162x: misc clean ups · 36f674d9
      Tejun Heo 提交于
      * use larger indents for structure member definitions
      
      * kill unused variable @addr in inic_scr_write()
      
      * kill unnecessary flushes in inic_freeze/thaw()
      
      * kill buggy explicit kfree() on devres managed port private data
      
      This is in preparation of further inic162x updates.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      36f674d9
    • M
      sata_mv use hweight16() for bit counting (V2) · c46938cc
      Mark Lord 提交于
      Some tidying as suggested by Grant Grundler.
      
      Nuke local bit-counting function from sata_mv in favour of using hweight16().
      Also add a short explanation for the 15msec timeout used when waiting for empty/idle.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      c46938cc
    • M
      sata_mv NCQ-EH for FIS-based switching · 4c299ca3
      Mark Lord 提交于
      Convert sata_mv's EH for FIS-based switching (FBS) over to the
      sequence recommended by Marvell.  This enables us to catch/analyze
      multiple failed links on a port-multiplier when using NCQ.
      
      To do this, we clear the ERR_DEV bit in the EDMA Halt-Conditions register,
      so that the EDMA engine doesn't self-disable on the first NCQ error.
      
      Our EH code sets the MV_PP_FLAG_DELAYED_EH flag to prevent new commands
      being queued while we await completion of all outstanding NCQ commands
      on all links of the failed PM.
      
      The SATA Test Control register tells us which links have failed,
      so we must only wait for any other active links to finish up
      before we stop the EDMA and run the .error_handler afterward.
      
      The patch also includes skeleton code for handling of non-NCQ FBS operation.
      This is more for documentation purposes right now, as that mode is not yet
      enabled in sata_mv.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      4c299ca3
    • M
      sata_mv delayed eh handling · 29d187bb
      Mark Lord 提交于
      Introduce a new "delayed error handling" mechanism in sata_mv,
      to enable us to eventually deal with multiple simultaneous NCQ
      failures on a single host link when a PM is present.
      
      This involves a port flag (MV_PP_FLAG_DELAYED_EH) to prevent new
      commands being queued, and a pmp bitmap to indicate which pmp links
      had NCQ errors.
      
      The new mv_pmp_error_handler() uses those values to invoke
      ata_eh_analyze_ncq_error() on each failed link, prior to freezing
      the port and passing control to sata_pmp_error_handler().
      
      This is based upon a strategy suggested by Tejun.
      
      For now, we just implement the delayed mechanism.
      The next patch in this series will add the multiple-NCQ EH code
      to take advantage of it.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      29d187bb
    • M
      libata: export ata_eh_analyze_ncq_error · 10acf3b0
      Mark Lord 提交于
      Export ata_eh_analyze_ncq_error() for subsequent use by sata_mv,
      as suggested by Tejun.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      10acf3b0
    • M
      sata_mv new mv_port_intr function · a9010329
      Mark Lord 提交于
      Separate out the inner loop body of mv_host_intr()
      into it's own function called mv_port_intr().
      
      This should help maintainabilty.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      a9010329
    • M
      sata_mv fix mv_host_intr bug for hc_irq_cause · eabd5eb1
      Mark Lord 提交于
      Remove the unwanted reads of hc_irq_cause from mv_host_intr(),
      thereby removing a bug whereby we were not always reading it when needed..
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      eabd5eb1
    • M
      sata_mv NCQ and SError fixes for mv_err_intr · 37b9046a
      Mark Lord 提交于
      Sigh.  Undo some earlier changes to mv_port_intr(),
      so that we now read/clear SError again in all cases.
      
      Arrange the top of the function to be as close as possible
      to what we need for a later update (in this series) for ERR_DEV handling.
      
      Fix things so that libata-eh can attempt a READ_LOG_EXT_10H
      in response to a failed NCQ command, by just doing a local
      mv_eh_freeze() rather than ata_port_freeze().
      
      This will now fully handle NCQ errors much of the time,
      but more fixes are needed for FBS/PMP, and for certain chip errata.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      37b9046a
    • M
      sata_mv rearrange mv_config_fbs · 00f42eab
      Mark Lord 提交于
      Rearrange mv_config_fbs() to more closely follow the (corrected) datasheet
      recommendations for NCQ and FIS-based switching (FBS).
      
      Also, maintain a port flag to let us know when FBS is enabled.
      We will make more use of that flag later in this patch series.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      00f42eab
    • M
      sata_mv errata workaround for sata25 part 1 · dd2890f6
      Mark Lord 提交于
      Part 1 of workaround for errata "sata#25" for the 60x1 series
      (the second half of this errata workaround is still in development.
      
      Bit22 of the GPIO port has to be set "on" when in NCQ mode.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      dd2890f6
    • M
      sata_mv new mv_qc_defer method · 3e4a1391
      Mark Lord 提交于
      The EDMA engine cannot tolerate a mix of NCQ/non-NCQ commands,
      and cannot be used for PIO at all.  So we need to prevent libata
      from trying to feed us such mixtures.
      
      Introduce mv_qc_defer() for this purpose, and use it for all chip versions.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      3e4a1391
    • M
      sata_mv wait for empty+idle · 9b2c4e0b
      Mark Lord 提交于
      When performing EH, it is recommended to wait for the EDMA engine
      to empty out requests-in-progress before disabling EDMA.
      
      Introduce code to poll the EDMA_STATUS register for idle/empty bits
      before disabling EDMA.  For non-EH operation, this will normally exit
      without delay, other than the register read.
      
      A later series of patches may focus on eliminating this and various
      other register reads (when possible) throughout the driver,
      but for now we're focussing on solid reliablity.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      9b2c4e0b
    • M
      sata_mv pci features · 616d4a98
      Mark Lord 提交于
      Some of the GenIIe EDMA optimizations should not be used
      for non-PCI (SOC) devices, and nor for certain configurations
      of conventional PCI (non PCI-X, PCIe) buses.
      
      Logic taken/simplified from that in the Marvell proprietary driver.
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      616d4a98
    • M
      sata_mv more cosmetic changes · 8e7decdb
      Mark Lord 提交于
      More cosmetic changes; no code changes.
      
       -- try and improve consistency of naming.
       -- add missing _OFS to tails of register offset definitions.
       -- rename mv_setup_ifctl() to mv_setup_ifcfg(), since that's what it really does.
       -- remove/move some dead comments
      Signed-off-by: NMark Lord <mlord@pobox.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      8e7decdb
    • A
      libata: Add Intel SCH PATA driver · 07ab85de
      Alek Du 提交于
      This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
      PATA controller support.
      Signed-off-by: NAlek Du <alek.du@intel.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      07ab85de
    • T
      ata_piix: verify SIDPR access before enabling it · cb6716c8
      Tejun Heo 提交于
      On certain configurations (certain macbooks), even though all the
      conditions for SIDPR access described in the datasheet are met,
      actually reading those registers just returns 0 and have no effect on
      write.  Verify SIDPR is actually working before enabling it.
      
      This is reported by Ryan Roth in bz#10512.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Cc: Ryan Roth <ryan.roth@ch2m.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      cb6716c8
    • T
      libata: improve post-reset device ready test · 78ab88f0
      Tejun Heo 提交于
      Some controllers (jmb and inic162x) use 0x77 and 0x7f to indicate that
      the device isn't ready yet.  It looks like they use 0xff if device
      presence is detected but connection isn't established.  0x77 or 0x7f
      after connection is established and use the value from signature FIS
      after receiving it.
      
      This patch implements ata_check_ready(), which takes TF status value
      and determines whether the port is ready or not considering the above
      and other conditions, and use it in @check_ready() functions.  This is
      safe as both 0x77 and 0x7f aren't valid ready status value even though
      they have BSY bit cleared.
      
      This fixes hot plug detection failures which can be triggered with
      certain drives if they aren't already spun up when the data connector
      is hot plugged.
      
      Tested on sil, sil24, ahci (jmb/ich), piix and inic162x combined with
      eight drives from all major vendors.
      Signed-off-by: NTejun Heo <htejun@gmail.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      78ab88f0
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · 4880d109
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        net_cls_act: act_simple dont ignore realloc code
        iwlwifi: make IWLWIFI a tristate
        Revert "atm: Do not free already unregistered net device."
        dccp: return -EINVAL on invalid feature length
        irda: fix !PNP support for drivers/net/irda/smsc-ircc2.c
        irda: fix !PNP support in drivers/net/irda/nsc-ircc.c
        net_cls_act: Make act_simple use of netlink policy.
        ip: Use inline function dst_metric() instead of direct access to dst->metric[]
        ip: Make use of the inline function dst_metric_locked()
        atm: Bad locking on br2684_devs modifications.
        atm: Do not free already unregistered net device.
        mac80211: Do not free net device after it is unregistered.
        bridge: Consolidate error paths in br_add_bridge().
        bridge: Net device leak in br_add_bridge().
        niu: Fix probing regression for maramba on-board chips.
        lapbeth: Release ->ethdev when unregistering device.
        xfrm: convert empty xfrm_audit_* macros to functions
        net: Fix useless comment reference loop.
        sch_htb: remove from event queue in htb_parent_to_leaf()
      4880d109
    • J
      net_cls_act: act_simple dont ignore realloc code · 9d1045ad
      Jamal Hadi Salim 提交于
      reallocation of the policy data was being ignored. It could fail.
      Simplify so that there is no need for reallocating.
      Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9d1045ad
    • A
      iwlwifi: make IWLWIFI a tristate · 1da5ea1a
      Adrian Bunk 提交于
      IWLWIFI should be a tristate so that if IWLCORE and/or IWL3945 are m
      and none of them is y kbuild doesn't create an empty 
      drivers/net/wireless/built-in.o
      
      This patch also removes the pointless "default n".
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1da5ea1a
    • D
      Revert "atm: Do not free already unregistered net device." · 5f6b1ea4
      David S. Miller 提交于
      This reverts commit 65e41136.
      
      Unlike the other cases Pavel fixed, this case did not
      setup a netdev->destructor of free_netdev, therefore this
      change was not correct.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5f6b1ea4