The GICv2 can have virtualization extension support, consisting
of an additional set of registers and interrupts. Add the necessary
binding to the GIC DT documentation.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The GIC support code is heavily using the fact that hardware
implementations are exposing banked registers. Unfortunately, it
looks like at least one GIC implementation (EXYNOS) offers both
the distributor and the CPU interfaces at different addresses,
depending on the CPU.

This problem is solved by allowing the distributor and CPU interface
addresses to be per-cpu variables for the platforms that require it.
The EXYNOS code is updated not to mess with the GIC internals while
handling interrupts, and struct gic_chip_data is back to being private.
The DT binding for the gic is updated to allow an optional "cpu-offset"
value, which is used to compute the various base addresses.

Finally, a new config option (GIC_NON_BANKED) is used to control this
feature, so the overhead is only present on kernels compiled with
support for EXYNOS.

Tested on Origen (EXYNOS4) and Panda (OMAP4).

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This adds ARM gic interrupt controller initialization using device tree
data.

The initialization function is intended to be called by of_irq_init
function like this:

const static struct of_device_id irq_match[] = {
	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
	{}
};

static void __init init_irqs(void)
{
	of_irq_init(irq_match);
}
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>