mixer_regs_dump() was called in mixer_run(), which was called
under the register spinlock in mixer_graph_buffer() and
vp_video_buffer().

This would trigger a sysmmu pagefault with drm.debug=0xff because
of the large delay caused by the register dumping.

To keep consistency also move register dumping out of mixer_stop(),
which is the counterpart to mixer_run().

Kernel dump:
[  131.296529] [drm:mixer_win_commit] win: 2
[  131.300693] [drm:mixer_regs_dump] MXR_STATUS = 00000081
[  131.305888] [drm:mixer_regs_dump] MXR_CFG = 000007d5
[  131.310835] [drm:mixer_regs_dump] MXR_INT_EN = 00000000
[  131.316043] [drm:mixer_regs_dump] MXR_INT_STATUS = 00000900
[  131.321598] [drm:mixer_regs_dump] MXR_LAYER_CFG = 00000321
[  131.327066] [drm:mixer_regs_dump] MXR_VIDEO_CFG = 00000000
[  131.332535] [drm:mixer_regs_dump] MXR_GRAPHIC0_CFG = 00310700
[  131.338263] [drm:mixer_regs_dump] MXR_GRAPHIC0_BASE = 20c00000
[  131.344079] [drm:mixer_regs_dump] MXR_GRAPHIC0_SPAN = 00000780
[  131.349895] [drm:mixer_regs_dump] MXR_GRAPHIC0_WH = 07800438
[  131.355537] [drm:mixer_regs_dump] MXR_GRAPHIC0_SXY = 00000000
[  131.361265] [drm:mixer_regs_dump] MXR_GRAPHIC0_DXY = 00000000
[  131.366994] [drm:mixer_regs_dump] MXR_GRAPHIC1_CFG = 00000000
[  131.372723] [drm:mixer_regs_dump] MXR_GRAPHIC1_BASE = 00000000
[  131.378539] [drm:mixer_regs_dump] MXR_GRAPHIC1_SPAN = 00000000
[  131.384354] [drm:mixer_regs_dump] MXR_GRAPHIC1_WH = 00000000
[  131.389996] [drm:mixer_regs_dump] MXR_GRAPHIC1_SXY = 00000000
[  131.395725] [drm:mixer_regs_dump] MXR_GRAPHIC1_DXY = 00000000
[  131.401486] PAGE FAULT occurred at 0x0 by 12e20000.sysmmu(Page table base: 0x6d990000)
[  131.409353]  Lv1 entry: 0x6e0f2401
[  131.412753] ------------[ cut here ]------------
[  131.417339] kernel BUG at drivers/iommu/exynos-iommu.c:358!
[  131.422894] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[  131.428709] Modules linked in: ecb bridge stp llc bnep btrfs xor xor_neon zlib_inflate zlib_deflate raid6_pq btusb bluetooth usb_storage s5p_jpeg
videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_core
[  131.447461] CPU: 0 PID: 2418 Comm: lt-modetest Tainted: G        W       4.0.1-debug+ #3
[  131.455530] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[  131.461607] task: ee194100 ti: ec4fe000 task.ti: ec4fe000
[  131.466995] PC is at exynos_sysmmu_irq+0x2a0/0x2a8
[  131.471766] LR is at vprintk_emit+0x268/0x594
[  131.476103] pc : [<c02781a4>]    lr : [<c00650d0>]    psr: a00001d3
[  131.476103] sp : ec4ff9d8  ip : 00000000  fp : ec4ffa14
[  131.487559] r10: ffffffda  r9 : ee206e28  r8 : ee2d1a10
[  131.492767] r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : ee206e10
[  131.499277] r3 : c06fca20  r2 : 00000000  r1 : 00000000  r0 : ee28be00
[  131.505788] Flags: NzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment user
[  131.513079] Control: 10c5387d  Table: 6c72404a  DAC: 00000015
[  131.518808] Process lt-modetest (pid: 2418, stack limit = 0xec4fe218)
[  131.525231] Stack: (0xec4ff9d8 to 0xec500000)
[  131.529571] f9c0:                                                       ec4ff9e4 c03a0c40
[  131.537732] f9e0: bbfa6e35 6d990000 6d161c3d ee20a900 ee04a7e0 00000028 ee007000 00000000
[  131.545891] fa00: 00000000 c06fb1fc ec4ffa5c ec4ffa18 c0066a34 c0277f10 ee257664 0000000b
[  131.554050] fa20: ec4ffa5c c06fafbb ee04a780 c06fb1e8 00000000 ee04a780 ee04a7e0 ee20a900
[  131.562209] fa40: ee007000 00000015 ec4ffb48 ee008000 ec4ffa7c ec4ffa60 c0066c90 c00669e0
[  131.570369] fa60: 00020000 ee04a780 ee04a7e0 00001000 ec4ffa94 ec4ffa80 c0069c6c c0066c58
[  131.578528] fa80: 00000028 ee004450 ec4ffaac ec4ffa98 c0066028 c0069bac 000000a0 c06e19b4
[  131.586687] faa0: ec4ffad4 ec4ffab0 c0223678 c0066000 c02235dc 00000015 00000000 00000015
[  131.594846] fac0: ec4ffc80 00000001 ec4ffaec ec4ffad8 c0066028 c02235e8 00000089 c06bfc54
[  131.603005] fae0: ec4ffb1c ec4ffaf0 c006633c c0066000 ec4ffb48 f002000c 00000025 00000015
[  131.611165] fb00: c06c680c ec4ffb48 f0020000 ee008000 ec4ffb44 ec4ffb20 c000867c c00662c4
[  131.619324] fb20: c02046ac 60000153 ffffffff ec4ffb7c 00000000 00000101 ec4ffbb4 ec4ffb48
[  131.627483] fb40: c0013240 c0008650 00000001 ee257508 00000002 00000001 ee257504 ee257508
[  131.635642] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90
[  131.643802] fb80: c002e124 c02046ac 60000153 ffffffff c002e09c 00000000 c06c6080 00000283
[  131.651960] fba0: 00000001 c06fb1ac ec4ffc0c ec4ffbb8 c002d690 c002e0a8 ee78d080 ee008000
[  131.660120] fbc0: 00400000 c04eb3b0 ffff7c44 c06c6100 c06fdac0 0000000a c06bf2f0 c06c6080
[  131.668279] fbe0: c06bfc54 c06bfc54 00000000 00000025 00000000 00000001 ec4ffc80 ee008000
[  131.676438] fc00: ec4ffc24 ec4ffc10 c002dbb8 c002d564 00000089 c06bfc54 ec4ffc54 ec4ffc28
[  131.684597] fc20: c0066340 c002dafc ec4ffc80 f002000c 0000001c 0000000c c06c680c ec4ffc80
[  131.692757] fc40: f0020000 00000080 ec4ffc7c ec4ffc58 c000867c c00662c4 c04e6624 60000053
[  131.700916] fc60: ffffffff ec4ffcb4 c072df54 ee22d010 ec4ffcdc ec4ffc80 c0013240 c0008650
[  131.709075] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420
[  131.717234] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624
[  131.725393] fcc0: 60000053 ffffffff ec4fe000 c072df54 ec4ffd34 ec4ffce0 c02b64d0 c04e6618
[  131.733552] fce0: ec4ffcf8 00000000 00000000 60000053 00010000 00010000 00000000 200cb000
[  131.741712] fd00: 20080000 ee22d664 00000001 ee256000 ee261400 ee22d420 00000080 00000080
[  131.749871] fd20: ee256000 00000280 ec4ffd74 ec4ffd38 c02a8844 c02b5fec 00000080 00000280
[  131.758030] fd40: 000001e0 00000000 00000000 00000280 000001e0 ee22d220 01e00000 00000002
[  131.766189] fd60: ee22d420 ee261400 ec4ffdbc ec4ffd78 c0293cbc c02a87a4 00000080 00000280
[  131.774348] fd80: 000001e0 00000000 00000000 02800000 01e00000 ee261400 ee22d460 ee261400
[  131.782508] fda0: ee22d420 00000000 01e00000 000001e0 ec4ffe24 ec4ffdc0 c0297800 c0293b24
[  131.790667] fdc0: 00000080 00000280 000001e0 00000000 00000000 02800000 01e00000 ec4ffdf8
[  131.798826] fde0: c028db00 00000080 00000080 ee256000 02800000 00000000 ec4ffe24 c06c6448
[  131.806985] fe00: c072df54 000000b7 ee013800 ec4ffe54 edbf7300 ec4ffe54 ec4fff04 ec4ffe28
[  131.815145] fe20: c028a848 c029768c 00000001 c06195d8 ec4ffe5c ec4ffe40 c0297680 c0521f6c
[  131.823304] fe40: 00000030 bed45d38 00000030 c03064b7 ec4ffe8c 00000011 00000015 00000022
[  131.831463] fe60: 00000000 00000080 00000080 00000280 000001e0 00000000 00000000 01e00000
[  131.839622] fe80: 02800000 00000000 00000000 0004b000 00000000 00000000 c00121e4 c0011080
[  131.847781] fea0: c00110a4 00000000 00000000 00000000 ec4ffeec ec4ffec0 c00110f0 c00121cc
[  131.855940] fec0: 00000000 c00e7fec ec4ffeec ec4ffed8 c004af2c dc8ba201 edae4fc0 edbf7000
[  131.864100] fee0: edbf7000 00000003 bed45d38 00000003 bed45d38 ee3f2040 ec4fff7c ec4fff08
[  131.872259] ff00: c010b62c c028a684 edae4fc0 00000000 00000000 b6666000 ec40d108 edae4fc4
[  131.880418] ff20: ec4fff6c ec4fff30 c00e7fec c02207b0 000001f9 00000000 edae5008 ec40d110
[  131.888577] ff40: 00070800 edae5008 edae4fc0 00070800 b6666000 edbf7000 edbf7000 c03064b7
[  131.896736] ff60: bed45d38 00000003 ec4fe000 00000000 ec4fffa4 ec4fff80 c010b84c c010b208
[  131.904896] ff80: 00000022 00000000 bed45d38 c03064b7 00000036 c000ede4 00000000 ec4fffa8
[  131.913055] ffa0: c000ec40 c010b81c 00000000 bed45d38 00000003 c03064b7 bed45d38 00000022
[  131.921214] ffc0: 00000000 bed45d38 c03064b7 00000036 00000080 00000080 00000000 000001e0
[  131.929373] ffe0: b6da4064 bed45d1c b6d98968 b6e8082c 60000050 00000003 00000000 00000000
[  131.937529] Backtrace:
[  131.939967] [<c0277f04>] (exynos_sysmmu_irq) from [<c0066a34>] (handle_irq_event_percpu+0x60/0x278)
[  131.948988]  r10:c06fb1fc r9:00000000 r8:00000000 r7:ee007000 r6:00000028 r5:ee04a7e0
[  131.956799]  r4:ee20a900
[  131.959320] [<c00669d4>] (handle_irq_event_percpu) from [<c0066c90>] (handle_irq_event+0x44/0x64)
[  131.968170]  r10:ee008000 r9:ec4ffb48 r8:00000015 r7:ee007000 r6:ee20a900 r5:ee04a7e0
[  131.975982]  r4:ee04a780
[  131.978504] [<c0066c4c>] (handle_irq_event) from [<c0069c6c>] (handle_level_irq+0xcc/0x144)
[  131.986832]  r6:00001000 r5:ee04a7e0 r4:ee04a780 r3:00020000
[  131.992478] [<c0069ba0>] (handle_level_irq) from [<c0066028>] (generic_handle_irq+0x34/0x44)
[  132.000894]  r5:ee004450 r4:00000028
[  132.004459] [<c0065ff4>] (generic_handle_irq) from [<c0223678>] (combiner_handle_cascade_irq+0x9c/0x108)
[  132.013914]  r4:c06e19b4 r3:000000a0
[  132.017476] [<c02235dc>] (combiner_handle_cascade_irq) from [<c0066028>] (generic_handle_irq+0x34/0x44)
[  132.026847]  r8:00000001 r7:ec4ffc80 r6:00000015 r5:00000000 r4:00000015 r3:c02235dc
[  132.034576] [<c0065ff4>] (generic_handle_irq) from [<c006633c>] (__handle_domain_irq+0x84/0xf0)
[  132.043252]  r4:c06bfc54 r3:00000089
[  132.046815] [<c00662b8>] (__handle_domain_irq) from [<c000867c>] (gic_handle_irq+0x38/0x70)
[  132.055144]  r10:ee008000 r9:f0020000 r8:ec4ffb48 r7:c06c680c r6:00000015 r5:00000025
[  132.062956]  r4:f002000c r3:ec4ffb48
[  132.066520] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74)
[  132.073980] Exception stack(0xec4ffb48 to 0xec4ffb90)
[  132.079016] fb40:                   00000001 ee257508 00000002 00000001 ee257504 ee257508
[  132.087176] fb60: 00000000 c06bf27c 00000000 00000101 ee008000 ec4ffbb4 00000000 ec4ffb90
[  132.095333] fb80: c002e124 c02046ac 60000153 ffffffff
[  132.100367]  r9:00000101 r8:00000000 r7:ec4ffb7c r6:ffffffff r5:60000153 r4:c02046ac
[  132.108098] [<c002e09c>] (tasklet_hi_action) from [<c002d690>] (__do_softirq+0x138/0x38c)
[  132.116251]  r8:c06fb1ac r7:00000001 r6:00000283 r5:c06c6080 r4:00000000 r3:c002e09c
[  132.123980] [<c002d558>] (__do_softirq) from [<c002dbb8>] (irq_exit+0xc8/0x104)
[  132.131268]  r10:ee008000 r9:ec4ffc80 r8:00000001 r7:00000000 r6:00000025 r5:00000000
[  132.139080]  r4:c06bfc54
[  132.141600] [<c002daf0>] (irq_exit) from [<c0066340>] (__handle_domain_irq+0x88/0xf0)
[  132.149409]  r4:c06bfc54 r3:00000089
[  132.152971] [<c00662b8>] (__handle_domain_irq) from [<c000867c>] (gic_handle_irq+0x38/0x70)
[  132.161300]  r10:00000080 r9:f0020000 r8:ec4ffc80 r7:c06c680c r6:0000000c r5:0000001c
[  132.169112]  r4:f002000c r3:ec4ffc80
[  132.172675] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74)
[  132.180137] Exception stack(0xec4ffc80 to 0xec4ffcc8)
[  132.185173] fc80: ee22d664 ee194100 00000000 ec4fe000 60000053 00000400 00000002 ee22d420
[  132.193332] fca0: c072df54 ee22d010 00000080 ec4ffcdc ec4ffcc8 ec4ffcc8 c04e6620 c04e6624
[  132.201489] fcc0: 60000053 ffffffff
[  132.204961]  r9:ee22d010 r8:c072df54 r7:ec4ffcb4 r6:ffffffff r5:60000053 r4:c04e6624
[  132.212694] [<c04e660c>] (_raw_spin_unlock_irqrestore) from [<c02b64d0>] (mixer_win_commit+0x4f0/0xcc8)
[  132.222060]  r4:c072df54 r3:ec4fe000
[  132.225625] [<c02b5fe0>] (mixer_win_commit) from [<c02a8844>] (exynos_update_plane+0xac/0xb8)
[  132.234126]  r10:00000280 r9:ee256000 r8:00000080 r7:00000080 r6:ee22d420 r5:ee261400
[  132.241937]  r4:ee256000
[  132.244461] [<c02a8798>] (exynos_update_plane) from [<c0293cbc>] (__setplane_internal+0x1a4/0x2c0)
[  132.253395]  r7:ee261400 r6:ee22d420 r5:00000002 r4:01e00000
[  132.259041] [<c0293b18>] (__setplane_internal) from [<c0297800>] (drm_mode_setplane+0x180/0x244)
[  132.267804]  r9:000001e0 r8:01e00000 r7:00000000 r6:ee22d420 r5:ee261400 r4:ee22d460
[  132.275535] [<c0297680>] (drm_mode_setplane) from [<c028a848>] (drm_ioctl+0x1d0/0x58c)
[  132.283428]  r10:ec4ffe54 r9:edbf7300 r8:ec4ffe54 r7:ee013800 r6:000000b7 r5:c072df54
[  132.291240]  r4:c06c6448
[  132.293763] [<c028a678>] (drm_ioctl) from [<c010b62c>] (do_vfs_ioctl+0x430/0x614)
[  132.301222]  r10:ee3f2040 r9:bed45d38 r8:00000003 r7:bed45d38 r6:00000003 r5:edbf7000
[  132.309034]  r4:edbf7000
[  132.311555] [<c010b1fc>] (do_vfs_ioctl) from [<c010b84c>] (SyS_ioctl+0x3c/0x64)
[  132.318842]  r10:00000000 r9:ec4fe000 r8:00000003 r7:bed45d38 r6:c03064b7 r5:edbf7000
[  132.326654]  r4:edbf7000
[  132.329176] [<c010b810>] (SyS_ioctl) from [<c000ec40>] (ret_fast_syscall+0x0/0x34)
[  132.336723]  r8:c000ede4 r7:00000036 r6:c03064b7 r5:bed45d38 r4:00000000 r3:00000022
[  132.344451] Code: e3130002 0affffaf eb09a67d eaffffad (e7f001f2)
[  132.350528] ---[ end trace d428689b94df895c ]---
[  132.355126] Kernel panic - not syncing: Fatal exception in interrupt
[  132.361465] CPU2: stopping
[  132.364155] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D W       4.0.1-debug+ #3
[  132.371791] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[  132.377866] Backtrace:
[  132.380304] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c)
[  132.387849]  r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201
[  132.393497] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8)
[  132.400698] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4)
[  132.408073]  r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b0000
[  132.413718] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70)
[  132.421267]  r9:f0028000 r8:ee0b1f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002800c
[  132.428995] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74)
[  132.436457] Exception stack(0xee0b1f48 to 0xee0b1f90)
[  132.441493] 1f40:                   00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4
[  132.449653] 1f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b1f9c ee0b1fa0 ee0b1f90
[  132.457811] 1f80: c000f82c c000f830 600f0053 ffffffff
[  132.462844]  r9:00000001 r8:c06c0dc0 r7:ee0b1f7c r6:ffffffff r5:600f0053 r4:c000f830
[  132.470575] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec)
[  132.478818] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100)
[  132.487755]  r7:c06fd440
[  132.490279] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744)
[  132.497651]  r4:6e09006a r3:c000872c
[  132.501210] CPU3: stopping
[  132.503904] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D W       4.0.1-debug+ #3
[  132.511539] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[  132.517614] Backtrace:
[  132.520051] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c)
[  132.527597]  r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201
[  132.533243] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8)
[  132.540446] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4)
[  132.547820]  r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0b2000
[  132.553466] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70)
[  132.561014]  r9:f002c000 r8:ee0b3f48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002c00c
[  132.568743] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74)
[  132.576205] Exception stack(0xee0b3f48 to 0xee0b3f90)
[  132.581241] 3f40:                   00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4
[  132.589401] 3f60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0b3f9c ee0b3fa0 ee0b3f90
[  132.597558] 3f80: c000f82c c000f830 600f0053 ffffffff
[  132.602591]  r9:00000001 r8:c06c0dc0 r7:ee0b3f7c r6:ffffffff r5:600f0053 r4:c000f830
[  132.610321] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec)
[  132.618566] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100)
[  132.627503]  r7:c06fd440
[  132.630023] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744)
[  132.637399]  r4:6e09006a r3:c000872c
[  132.640958] CPU1: stopping
[  132.643651] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D W       4.0.1-debug+ #3
[  132.651287] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[  132.657362] Backtrace:
[  132.659799] [<c0012484>] (dump_backtrace) from [<c001269c>] (show_stack+0x18/0x1c)
[  132.667344]  r6:c06e158c r5:ffffffff r4:00000000 r3:dc8ba201
[  132.672991] [<c0012684>] (show_stack) from [<c04dfb94>] (dump_stack+0x88/0xc8)
[  132.680194] [<c04dfb0c>] (dump_stack) from [<c0014894>] (handle_IPI+0x1c8/0x2c4)
[  132.687569]  r6:c06bfc54 r5:c06bfc54 r4:00000005 r3:ee0ae000
[  132.693214] [<c00146cc>] (handle_IPI) from [<c00086b0>] (gic_handle_irq+0x6c/0x70)
[  132.700762]  r9:f0024000 r8:ee0aff48 r7:c06c680c r6:fffffff5 r5:00000005 r4:f002400c
[  132.708491] [<c0008644>] (gic_handle_irq) from [<c0013240>] (__irq_svc+0x40/0x74)
[  132.715953] Exception stack(0xee0aff48 to 0xee0aff90)
[  132.720989] ff40:                   00000001 00000000 00000000 c00206c0 c06c6518 c04eb3a4
[  132.729149] ff60: 00000000 00000000 c06c0dc0 00000001 c06fb774 ee0aff9c ee0affa0 ee0aff90
[  132.737306] ff80: c000f82c c000f830 60070053 ffffffff
[  132.742339]  r9:00000001 r8:c06c0dc0 r7:ee0aff7c r6:ffffffff r5:60070053 r4:c000f830
[  132.750069] [<c000f7f0>] (arch_cpu_idle) from [<c005b6e8>] (cpu_startup_entry+0x318/0x4ec)
[  132.758314] [<c005b3d0>] (cpu_startup_entry) from [<c00144d0>] (secondary_start_kernel+0xf4/0x100)
[  132.767251]  r7:c06fd440
[  132.769772] [<c00143dc>] (secondary_start_kernel) from [<40008744>] (0x40008744)
[  132.777146]  r4:6e09006a r3:c000872c
[  132.780709] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Simplify the code and remove superfluous return statement. Just return
the result of fimd_iommu_attach_devices().
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The Exynos DRM code does not modify the ops provided by CRTC driver in
exynos_drm_crtc_create() call.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C)
leads to build error:

drivers/built-in.o: In function `exynos_dp_dpms':
binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable'
binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable'

Fix this by changing direct call to fimd_dp_clock_enable() into optional
call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD
implements this op.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Move the defines for the pixelformats that the mixer supports out
of mixer_graph_buffer() to the top of the source.
Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on
the plane's pf (and not bpp).
Also add handling of RGB565 and XRGB1555 to the switch statement and
exit early if the plane has an unsupported pf.

Partially based on 'drm/exynos: enable/disable blend based on pixel
format' by Gustavo Padovan <gustavo.padovan@collabora.co.uk>.

v2: Use the shorter MXR_FORMAT as prefix.
v3: Re-add ARGB8888 because of compatibility reasons
    (suggested by Joonyoung Shim).
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

All the necessary code is already there, just need to
handle the format in the switch statement.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The video processor (VP) supports four formats: NV12, NV21 and its
tiled variants. All these formats are bi-planar, so the buffer
count in vp_video_buffer() is always 2.

Also properly exit if we're called with an invalid (non-VP) pixelformat.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Previously we were ignoring the buffer offsets that are
passed through the addfb2 ioctl. This didn't cause any
major issues, since for uni-planar formats (like XRGB8888)
userspace would most of the time just use offsets[0]=0.

However with NV12 offsets[1] is very likely non-zero.
So properly apply the offsets to our dma addresses.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The previous code had some special case handling for the buffer
count in exynos_drm_format_num_buffers().

This code was incorrect though, since this special case doesn't
exist for DRM. It stemmed from the existence of the special NV12M
V4L2 format. NV12 is a bi-planar format (separate planes for luma
and chroma) and V4L2 differentiates between a NV12 buffer where
luma and chroma is contiguous in memory (so no data between
luma/chroma), and a NV12 buffer where luma and chroma have two
explicit memory locations (which is then called NV12M).

This distinction doesn't exist for DRM. A bi-planar format always
explicitly comes with the information about its two planes (even
if these planes should be contiguous).
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In commit 8ff16cf7 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:

  http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074

It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.

This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.

At the same time, let's move the documentation to a better name.

Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>

In error paths, this was being called without struct_mutex held.
Leading to panics like:

  msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU
  Kernel panic - not syncing: BUG!
  CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4
  Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
  Call trace:
  [<ffffffc000089c78>] dump_backtrace+0x0/0x118
  [<ffffffc000089da0>] show_stack+0x10/0x20
  [<ffffffc0006686d4>] dump_stack+0x84/0xc4
  [<ffffffc0006678b4>] panic+0xd0/0x210
  [<ffffffc0003e1ce4>] drm_gem_object_free+0x5c/0x60
  [<ffffffc000402870>] adreno_gpu_cleanup+0x60/0x80
  [<ffffffc0004035a0>] a3xx_destroy+0x20/0x70
  [<ffffffc0004036f4>] a3xx_gpu_init+0x84/0x108
  [<ffffffc0004018b8>] adreno_load_gpu+0x58/0x190
  [<ffffffc000419dac>] msm_open+0x74/0x88
  [<ffffffc0003e0a48>] drm_open+0x168/0x400
  [<ffffffc0003e7210>] drm_stub_open+0xa8/0x118
  [<ffffffc0001a0e84>] chrdev_open+0x94/0x198
  [<ffffffc000199f88>] do_dentry_open+0x208/0x310
  [<ffffffc00019a4c4>] vfs_open+0x44/0x50
  [<ffffffc0001aa26c>] do_last.isra.14+0x2c4/0xc10
  [<ffffffc0001aac38>] path_openat+0x80/0x5e8
  [<ffffffc0001ac354>] do_filp_open+0x2c/0x98
  [<ffffffc00019b60c>] do_sys_open+0x13c/0x228
  [<ffffffc00019b72c>] SyS_openat+0xc/0x18
  CPU1: stopping

But there isn't any particularly good reason to hold struct_mutex for
teardown, so just standardize on calling it without the mutex held and
use the _unlocked() versions for GEM obj unref'ing
Signed-off-by: NRob Clark <robdclark@gmail.com>

Reported-by: NFengguang Wu <fengguang.wu@gmail.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During cmd rx, only new versions of H/W provide register to read back
the real number of byte returned by panel. For the old versions, reading
this register will not get the right number. In fact, we only need to
assume the returned data is the same size as we expected, because later
we will check the data type to detect error.
Signed-off-by: NHai Li <hali@codeaurora.org>

drm_mode_connector_attach_encoder() function call is missing
during eDP and DSI connector initialization. As a result,
no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system
call. This change is to fix this issue.
Signed-off-by: NHai Li <hali@codeaurora.org>

Commit 2a6a28e7 ("mtd: Make MTD tests cancelable") accidentally
clobbered any read failure reports.

Coverity CID #1296020
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

First of all, we don't want -EPROBE_DEFER when trying to bind children
to cause us to forget to free our vram.  And second we don't want vram
allocation fail to trigger _unbind_all() before _bind_all().
Signed-off-by: NRob Clark <robdclark@gmail.com>

When things go badly we can get a lot of these error irqs.  Let's not
DoS the user.
Signed-off-by: NRob Clark <robdclark@gmail.com>

When msm_framebuffer_init() fails before calling drm_framebuffer_init(),
drm_framebuffer_cleanup() [called in msm_framebuffer_destroy()]
is still being called even though drm_framebuffer_init() was not
called for that buffer. Thus a NULL pointer derefencing:

[  247.529691] Unable to handle kernel NULL pointer dereference at virtual address 0000027c
...
[  247.563996] PC is at __mutex_lock_slowpath+0x94/0x3a8
...
[  247.823025] [<c07c3c78>] (__mutex_lock_slowpath) from [<c07c3fac>] (mutex_lock+0x20/0x3c)
[  247.831186] [<c07c3fac>] (mutex_lock) from [<c0347cf0>] (drm_framebuffer_cleanup+0x18/0x38)
[  247.839520] [<c0347cf0>] (drm_framebuffer_cleanup) from [<c036d138>] (msm_framebuffer_destroy+0x48/0x100)
[  247.849066] [<c036d138>] (msm_framebuffer_destroy) from [<c036d580>] (msm_framebuffer_init+0x1e8/0x228)
[  247.858439] [<c036d580>] (msm_framebuffer_init) from [<c036d630>] (msm_framebuffer_create+0x70/0x134)
[  247.867642] [<c036d630>] (msm_framebuffer_create) from [<c03493ec>] (internal_framebuffer_create+0x67c/0x7b4)
[  247.877537] [<c03493ec>] (internal_framebuffer_create) from [<c034ce34>] (drm_mode_addfb2+0x20/0x98)
[  247.886650] [<c034ce34>] (drm_mode_addfb2) from [<c034071c>] (drm_ioctl+0x240/0x420)
[  247.894378] [<c034071c>] (drm_ioctl) from [<c011df7c>] (do_vfs_ioctl+0x4e4/0x5a4)
...
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
[plus initialize msm_fb to NULL to -Rob]
Signed-off-by: NRob Clark <robdclark@gmail.com>

This causes an oops as we haven't initialised the mst
layer.
Reported-by: NDave Jones <&lt;davej@codemonkey.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The current iteration in get_dsi_id_from_intf() is wrong:
instead of iterating until hw_cfg->intf.count, we need to iterate
until MDP5_INTF_NUM_MAX here.

Let's take the example of msm8x16:

 hw_cfg->intf.count = 1
 intfs[0] = INTF_Disabled
 intfs[1] = INTF_DSI

If we stop iterating once i reaches hw_cfg->intf.count (== 1),
we will miss the test for intfs[1].

Actually, this hw_cfg->intf.count entry is quite confusing and is not
(or *should not be*) used anywhere else; let's remove it.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>

Signed-off-by: NHai Li <hali@codeaurora.org>

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>

The DRM_KMS_FB_HELPER config is selected only when DRM_MSM_FBDEV config is
selected. The driver accesses drm_fb_helper_* functions even when legacy fbdev
support is disabled in msm. Wrap around these functions with #ifdef checks to
prevent build break.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>

Avoid such errors at compilation time:
	format '%d' expects argument of type 'int', but argument 3 has type 'size_t'
Signed-off-by: NStephane Viau <sviau@codeaurora.org>

Avoid casts from pointers to fixed-size integers to prevent the compiler
from warning. Print virtual memory addresses using %p instead. Also turn
a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings
due to mismatched format strings.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

In function dmi_present(), dmi_walk_early() calls dmi_table(), which
calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last
function makes a decision based on the value of global variable
dmi_ver. The problem is that this variable is set right _after_
dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0
regardless of the actual version implemented.

This causes /sys/class/dmi/id/product_uuid to always use the old
ordering even on systems implementing DMI/SMBIOS 2.6 or later, which
should use the new ordering.

This is broken since kernel v3.8 for legacy DMI implementations and
since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3
implementations with the 64-bit entry point are not affected.

The first breakage does not matter much as in practice legacy DMI
implementations are always for versions older than 2.6, which is when
the UUID ordering changed. The second breakage is more problematic as
it affects the vast majority of x86 systems manufactured since 2009.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists")
Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()")
Acked-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Artem Savkov <artem.savkov@gmail.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: stable@vger.kernel.org [v3.10+]

The trailing .x adds no information for the reader, and if anyone
tries to parse that line, this is more work as they have 3 different
formats to handle instead of 2. Plus, this makes backporting fixes
harder.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 95be58df ("firmware: dmi_scan: Use full dmi version for SMBIOS3")
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

The irq chip functions use the irq chipdata directly as the base register
address of the controller, so this should be passed in instead of a pointer
to the array address holding the base address.

This fixes Tegra20 CPUidle as now the un-/masking of IRQs at the LIC level
works again, but more importantly it fixes the resulting memory corruption.

Fixes: de3ce080 ' irqchip: tegra: Add DT-based support for legacy interrupt controller'
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1431202014-3136-1-git-send-email-dev@lynxeye.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Commit e2c65448 moved pm_qos_req to e1000_adapter. Add the header file
that defines the struct.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't do clock-mode-select if clk == NULL,
since when building without CONFIG_HAVE_CLK,
clk_get returns NULL and clk_get_rate returns 0.

Doing clock-mode-select in this cause causes kszphy_probe to
return -EINVAL and thus prevents the device from being probed.

The original code (before regression) would return 0
when building without CONFIG_HAVE_CLK.

Cc: stable <stable@vger.kernel.org> # 3.18+
Fixes: 1fadee0c ("net/phy: micrel: Add clock support for
KSZ8021/KSZ8031")
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NNiklas Cassel <niklass@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA allocates skb->len instead of headlen
which is used for DMA.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Revert commit b1ef2972 (ACPICA: Permanently set _REV to the value
'2'.) as it causes a sound regression to happen on Dell XPS 13 (2015).
Reported-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause
bad logging output so remove them.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

'channels' is allocated via kmemdup and it is never freed.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Reported-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

According to hardware team there should be some delay after
setting channel number, start mode and before setting START.
Add a one microsecond delay for this purpose.

Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

regulator_get_voltage() returns a non-negative value in case of success,
and a negative error in case of error. Let's fix this.

Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

At present we are incorrectly setting the register to 0x1 to power up
the ADC. Since it is an active high power down register, we need to set
the register to 0x0 to actually power up. Conversely, writing 0x1 to the
register powers it down.

This commit adds a couple of helpers to make the code clearer and then
use them to do the power-up/power-down properly.

Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver")
Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Commit d4988623 ("IB/qib: use arch_phys_wc_add()")
adjusted mtrr inititialization to use the new interface.

Unfortunately, the new interface returns a signed
value and the patch tested the unsigned wc_cookie.

Fix the issue by changing the type of wc_cookie to int.  For
the success case the ret left at zero to avoid
a warning from the caller.  For failure wc_cookie
is used as the ret.
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute.
Without this fix parsing of the nlmsg by the userspace port mapper service fails
because of unknown attribute length, causing the port mapper service not to
register the client, which has sent the nlmsg.
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Cc: <stable@vger.kernel.org> #v3.16
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>