- 06 11月, 2011 12 次提交
-
-
由 Josef Bacik 提交于
We all keep getting those stupid warnings from use_block_rsv when running stress.sh, and it's because the delayed insertion stuff is being stupid. It's not the delayed insertion stuffs fault, it's all just stupid. When marking an inode dirty for oh say updating the time on it, we just do a btrfs_join_transaction, which doesn't reserve any space. This is stupid because we're going to have to have space reserve to make this change, but we do it because it's fast because chances are we're going to call it over and over again and it doesn't matter. Well thanks to the delayed insertion stuff this is mostly the case, so we do actually need to make this reservation. So if trans->bytes_reserved is 0 then try to do a normal reservation. If not return ENOSPC which will make the btrfs_dirty_inode start a proper transaction which will let it do the whole ENOSPC dance and reserve enough space for the delayed insertion to steal the reservation from the transaction. The other stupid thing we do is not reserve space for the inode when writing to the thing. Usually this is ok since we have to update the time so we'd have already done all this work before we get to the endio stuff, so it doesn't matter. But this is stupid because we could write the data after the transaction commits where we changed the mtime of the inode so we have to cow all the way down to the inode anyway. This used to be masked by the delalloc reservation stuff, but because we delay the update it doesn't get masked in this case. So again the delayed insertion stuff bites us in the ass. So if our trans->block_rsv is delalloc, just steal the reservation from the delalloc reserve. Hopefully this won't bite us in the ass, but I've said that before. With this patch stress.sh no longer spits out those stupid warnings (famous last words). Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Failure testing was tripping up over stale PageError bits in metadata pages. If we have an io error on a block, and later on end up reusing it, nobody ever clears PageError on those pages. During commit, we'll find PageError and think we had trouble writing the block, which will lead to aborts and other problems. This changes clean_tree_block and the btrfs writepage code to clear the PageError bit. In both cases we're either completely done with the page or the page has good stuff and the error bit is no longer valid. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Because of the overcommit stuff I had to make it so that we committed the transaction all the time in reserve_metadata_bytes in case we had overcommitted because of delayed items. This was because previously we had no way of knowing how much space was reserved for delayed items. Now that we have the delayed_block_rsv we can check it to see if committing the transaction would get us anywhere. This patch breaks out the committing logic into a helper function that will check to see if committing the transaction would free enough space for us to get anything done. With this patch xfstests 83 goes from taking 445 seconds to taking 28 seconds on my box. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
I've been hitting warnings in use_block_rsv when running the delayed insertion stuff. It's because we will readjust global block rsv based on what is in use, which means we could end up discarding reservations that are for the delayed insertion stuff. So instead create a seperate block rsv for the delayed insertion stuff. This will also make it easier to debug problems with the delayed insertion reservations since we will know that only the delayed insertion code touches this block_rsv. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This takes some of the free space in the btrfs super block to record information about most of the roots in the last four commits. It also adds a -o recovery to use the root history log when we're not able to read the tree of tree roots, the extent tree root, the device tree root or the csum root. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Sterba 提交于
fs_info has now ~9kb, more than fits into one page. This will cause mount failure when memory is too fragmented. Top space consumers are super block structures super_copy and super_for_commit, ~2.8kb each. Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64) Add a wrapper for freeing fs_info and all of it's dynamically allocated members. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 Josef Bacik 提交于
We no longer use the orphan block rsv for holding the reservation for truncating the inode, so instead use the global block rsv and check to make sure it has enough space for us to truncate the space. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
I fixed a problem where we weren't reserving space for an orphan item when we had to fallback to using the global reserve for an unlink, but I introduced another problem. I was migrating the bytes from the transaction reserve to the global reserve and then releasing from the global reserve in btrfs_end_transaction(). The problem with this is that a migrate will jack up the size for the destination, but leave the size alone for the source, with the idea that you can do a release normally on the source and it all washes out, and then you can do a release again on the destination and it works out right. My way was skipping the release on the trans_block_rsv which still had the jacked up size from our original reservation. So instead release manually from the global reserve if this transaction was using it, and then set the trans->block_rsv back to the trans_block_rsv so that btrfs_end_transaction cleans everything up properly. With this patch xfstest 83 doesn't emit warnings about leaking space. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
write_cache_pages tries to build up a large bio to stuff down the pipe. But if it needs to wait for a page lock, it needs to make sure and send down any pending writes so we don't deadlock with anyone who has the page lock and is waiting for writeback of things inside the bio. Dave Sterba triggered this as a deadlock between the autodefrag code and the extent write_cache_pages Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The tree log had two important bugs that could cause corruptions after a crash. Sometimes we were allowing tree log blocks to be reused after the tree log was committed but before the transaction commit was done. This allowed a future metadata write to overwrite the tree log data. It is fixed by adding a new variant of freeing reserved extents that always pins them. Credit goes to Stefan Behrens and Arne Jansen for many many hours spent tracking this bug down. During tree log replay, we do a pass through the tree log and pin all the extents we find. This makes sure the replay code won't go in and use any of those blocks for new allocations during replay. The problem is the free space cache isn't honoring these pinned extents. So the allocator can end up handing them out, leading to all kinds of problems during replay. The fix here is to force any free space cache to load while we pin the extents, and then to make sure we remove the pinned extents from the free space rbtree. Signed-off-by: NChris Mason <chris.mason@oracle.com> Reported-by: NStefan Behrens <sbehrens@giantdisaster.de>
-
由 Chris Mason 提交于
btrfs_remove_free_space needs to make sure to set ret back to a valid return value after setting it to EAGAIN, otherwise we return it to the callers. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
When we're doing log commits, we try to wait for more writers to come in and make the commit bigger. This helps improve performance on rotating disks, but on SSDs it adds latencies. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 24 10月, 2011 9 次提交
-
-
由 David Sterba 提交于
The WARN_ON under some circumstances heavily polute log and slow down the machine. This is just a safety, as the warning should be fixed by another patch, nevertheless, it still pops up during testing. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
-
由 David Sterba 提交于
-
由 David Sterba 提交于
There's a missing test whether the path passed to subvol=path option during mount is a real subvolume, allowing any directory located in default subovlume to be passed and accepted for mount. (current btrfs progs prevent this early) $ btrfs subvol snapshot . p1-snap ERROR: '.' is not a subvolume (with "is subvolume?" test bypassed) $ btrfs subvol snapshot . p1-snap Create a snapshot of '.' in './p1-snap' $ btrfs subvol list -p . ID 258 parent 5 top level 5 path subvol ID 259 parent 5 top level 5 path subvol1 ID 260 parent 5 top level 5 path default-subvol1 ID 262 parent 5 top level 5 path p1/p1-snapshot ID 263 parent 259 top level 5 path subvol1/subvol1-snap The problem I see is that this makes a false impression of snapshotting the given subvolume but in fact snapshots the default one: a user expects outcome like ID 263 but in fact gets ID 262 . This patch makes mount fail with EINVAL with a message in syslog. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/iommu-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/iommu-2.6: intel-iommu: fix superpage support in pfn_to_dma_pte() intel-iommu: set iommu_superpage on VM domains to lowest common denominator intel-iommu: fix return value of iommu_unmap() API MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move intel-iommu: Export a flag indicating that the IOMMU is used for iGFX. intel-iommu: Workaround IOTLB hang on Ironlake GPU intel-iommu: Fix AB-BA lockdep report
-
http://people.redhat.com/agk/git/linux-dm由 Linus Torvalds 提交于
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm kcopyd: fix job_pool leak
-
由 Takashi Iwai 提交于
Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai.lu@oracle.com> [ We'll hopefully find the real fix, but that's too late for 3.1 now ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alasdair G Kergon 提交于
Fix memory leak introduced by commit a6e50b40 (dm snapshot: skip reading origin when overwriting complete chunk). When allocating a set of jobs from kc->job_pool, job->master_job must be set (to point to itself) so that the mempool item gets freed when the master_job completes. master_job was introduced by commit c6ea41fb (dm kcopyd: preallocate sub jobs to avoid deadlock) Reported-by: NMichael Leun <ml@newton.leun.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 23 10月, 2011 2 次提交
-
-
git://github.com/kgene/linux-samsung由 Linus Torvalds 提交于
* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung: ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM ARM: S5P: fix offset calculation on gpio-interrupt
-
由 Linus Torvalds 提交于
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix negative 8-bit temperature values
-
- 22 10月, 2011 1 次提交
-
-
由 Domenico Andreoli 提交于
v2: - register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be conditionally compiled out, it is already optimized out on !CONFIG_PM - fix also s3c2412 and s3c2416 affected by the same build issue v1: s3c2440.c fails to build if !CONFIG_PM because in such case s3c2410_pm_syscore_ops is not defined. Same error should happen also in s3c2410.c and s3c2442.c Signed-off-by: NDomenico Andreoli <cavokz@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 10月, 2011 16 次提交
-
-
git://github.com/herbertx/crypto由 Linus Torvalds 提交于
* git://github.com/herbertx/crypto: crypto: ghash - Avoid null pointer dereference if no key is set
-
git://github.com/tiwai/sound由 Linus Torvalds 提交于
* 'fix/hda' of git://github.com/tiwai/sound: ALSA: HDA: conexant support for Lenovo T520/W520 ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
-
由 Nick Bowler 提交于
The ghash_update function passes a pointer to gf128mul_4k_lle which will be NULL if ghash_setkey is not called or if the most recent call to ghash_setkey failed to allocate memory. This causes an oops. Fix this up by returning an error code in the null case. This is trivially triggered from unprivileged userspace through the AF_ALG interface by simply writing to the socket without setting a key. The ghash_final function has a similar issue, but triggering it requires a memory allocation failure in ghash_setkey _after_ at least one successful call to ghash_update. BUG: unable to handle kernel NULL pointer dereference at 00000670 IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc Pid: 1502, comm: hashatron Tainted: G W 3.1.0-rc9-00085-ge9308cfd #32 Bochs Bochs EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0 EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul] EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000 ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000) Stack: 00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000 00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc 00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000 Call Trace: [<c101a520>] ? kmap_atomic_prot+0x37/0xa6 [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic] [<c11676ed>] crypto_shash_update+0x18/0x1b [<c11679ad>] shash_ahash_update+0x22/0x36 [<c11679cc>] shash_async_update+0xb/0xd [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash] [<c121b24c>] kernel_sendpage+0x39/0x4e [<d88ce000>] ? 0xd88cdfff [<c121b298>] sock_sendpage+0x37/0x3e [<c121b261>] ? kernel_sendpage+0x4e/0x4e [<c10b4dbc>] pipe_to_sendpage+0x56/0x61 [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b51f5>] __splice_from_pipe+0x36/0x55 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b6383>] splice_from_pipe+0x51/0x64 [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c [<c10b63d5>] generic_splice_sendpage+0x13/0x15 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b527f>] do_splice_from+0x5d/0x67 [<c10b6865>] sys_splice+0x2bf/0x363 [<c129373b>] ? sysenter_exit+0xf/0x16 [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f [<c129370c>] sysenter_do_call+0x12/0x32 Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4 CR2: 0000000000000670 ---[ end trace 4eaa2a86a8e2da24 ]--- note: hashatron[1502] exited with preempt_count 1 BUG: scheduling while atomic: hashatron/1502/0x10000002 INFO: lockdep is turned off. [...] Signed-off-by: NNick Bowler <nbowler@elliptictech.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Marek Szyprowski 提交于
Offsets of the irq controller registers were calculated correctly only for first GPIO bank. This patch fixes calculation of the register offsets for all GPIO banks. Reported-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add alignment flag to PCI expansion resources sparc: Avoid calling sigprocmask() sparc: Use set_current_blocked() sparc32,leon: SRMMU MMU Table probe fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fib_rules: fix unresolved_rules counting r8169: fix wrong eee setting for rlt8111evl r8169: fix driver shutdown WoL regression. ehea: Change maintainer to me pptp: pptp_rcv_core() misses pskb_may_pull() call tproxy: copy transparent flag when creating a time wait pptp: fix skb leak in pptp_xmit() bonding: use local function pointer of bond->recv_probe in bond_handle_frame smsc911x: Add support for SMSC LAN89218 tg3: negate USE_PHYLIB flag check netconsole: enable netconsole can make net_device refcnt incorrent bluetooth: Properly clone LSM attributes to newly created child connections l2tp: fix a potential skb leak in l2tp_xmit_skb() bridge: fix hang on removal of bridge via netlink x25: Prevent skb overreads when checking call user data x25: Handle undersized/fragmented skbs x25: Validate incoming call user data lengths udplite: fast-path computation of checksum coverage IPVS netns shutdown/startup dead-lock netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
-
由 Ilya Dryomov 提交于
Fix a bug introduced by 20b45077. We have to return EINVAL on mount failure, but doing that too early in the sequence leaves all of the devices opened exclusively. This also fixes an issue where under some scenarios only a second mount -o degraded <devices> command would succeed. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Initialize fs_info->bdev_holder a bit earlier to be able to pass a correct holder id to blkdev_get() when opening seed devices with O_EXCL. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Daniel J Blueman 提交于
If lookup_extent_backref fails, path->nodes[0] reasonably could be null along with other callers of btrfs_print_leaf, so ensure we have a valid extent buffer before dereferencing. Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
-
由 Miao Xie 提交于
The task may fail to get free space though it is enough when multi-task space allocation and caching space happen at the same time. Task1 Caching Thread Task2 ------------------------------------------------------------------------ find_free_extent The space has not be cached, and start caching thread. And wait for it. cache space, if the space is > 2MB wake up Task1 find_free_extent get all the space that is cached. try to allocate space, but there is no space now. trigger BUG_ON() The message is following: btrfs allocation failed flags 1, wanted 4096 space_info has 1040187392 free, is not full space_info total=1082130432, used=4096, pinned=41938944, reserved=0, may_use=40828928, readonly=0 block group 12582912 has 8388608 bytes, 0 used 8388608 pinned 0 reserved block group has cluster?: no 0 blocks of free space at or bigger than bytes is block group 1103101952 has 1073741824 bytes, 4096 used 33550336 pinned 0 reserved block group has cluster?: no 0 blocks of free space at or bigger than bytes is ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:835! [<ffffffffa031261b>] __extent_writepage+0x1bf/0x5ce [btrfs] [<ffffffff810cbcb8>] ? __set_page_dirty_nobuffers+0xfe/0x108 [<ffffffffa02f8ada>] ? wait_current_trans+0x23/0xec [btrfs] [<ffffffff810c3fbf>] ? find_get_pages_tag+0x73/0xe2 [<ffffffffa0312d12>] extent_write_cache_pages.clone.0+0x176/0x29a [btrfs] [<ffffffffa0312e74>] extent_writepages+0x3e/0x53 [btrfs] [<ffffffff8110ad2c>] ? do_sync_write+0xc6/0x103 [<ffffffffa0302d6e>] ? btrfs_submit_direct+0x414/0x414 [btrfs] [<ffffffff811380fa>] ? fsnotify+0x236/0x266 [<ffffffffa02fc930>] btrfs_writepages+0x22/0x24 [btrfs] [<ffffffff810cc215>] do_writepages+0x1c/0x25 [<ffffffff810c4958>] __filemap_fdatawrite_range+0x4e/0x50 [<ffffffff810c4982>] filemap_write_and_wait_range+0x28/0x51 [<ffffffffa0306b2e>] btrfs_sync_file+0x7d/0x198 [btrfs] [<ffffffff8110aa26>] ? fsnotify_modify+0x5d/0x65 [<ffffffff8112d150>] vfs_fsync_range+0x18/0x21 [<ffffffff8112d170>] vfs_fsync+0x17/0x19 [<ffffffff8112d316>] do_fsync+0x29/0x3e [<ffffffff8112d348>] sys_fsync+0xb/0xf [<ffffffff81468352>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa02fe08c>] cow_file_range+0x1c4/0x32b [btrfs] We fix this bug by trying to allocate the space again if there are block groups in caching. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
由 Tsutomu Itoh 提交于
In btrfs_get_acl(), when the second __btrfs_getxattr() call fails, acl is not correctly set. Therefore, a wrong value might return to the caller. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
-
由 Ilya Dryomov 提交于
Free space items are located in tree of tree roots, not in the extent tree. It didn't pop up because lookup_free_space_inode() grabs the inode all the time instead of actually searching the tree. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Liu Bo 提交于
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
-
由 Li Zefan 提交于
To reproduce the bug: # mount -o nodatacow /dev/sda7 /mnt/ # dd if=/dev/zero of=/mnt/tmp bs=4K count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB) copied, 0.000136115 s, 30.1 MB/s # dd if=/dev/zero of=/mnt/tmp bs=4K count=1 conv=notrunc oflag=direct dd: writing `/mnt/tmp': Input/output error 1+0 records in 0+0 records out btrfs_ordered_update_i_size() may return 1, but btrfs_endio_direct_write() mistakenly takes it as an error. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
It's not a big deal if we fail to allocate the array, and instead of panic we can just give up compressing. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
Otherwise we can execced the array bound of path->slots[]. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-