We should try to trigger automount *before* bailing out on negative dentry.
Reported-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Reported-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Reported-by: NArend van Spriel <arend@broadcom.com>
Tested-by: NArend van Spriel <arend@broadcom.com>
Tested-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 1ae1602d "configfs: switch ->default groups to a linked list"
left the NULL gps pointer behind after removing the kcalloc() call which
made it non-NULL. It also left the !gps check in place so make_cluster()
now fails with ENOMEM. Remove the remaining uses of the gps variable to
fix that.
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Reviewed-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAndrew Price <anprice@redhat.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>

Commit 0b81d077 ("fs crypto: move per-file encryption from f2fs
tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and
renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_"
to just "FS" for preprocessor symbols).

Because of the symbol renaming, it's a bit hard to see it as a file
move: use

    git show -M30 0b81d077

to lower the rename detection to just 30% similarity and make git show
the files as renamed (the header file won't be shown as a rename even
then - since all it contains is symbol definitions, it looks almost
completely different).

Even with the renames showing as renames, the diffs are not all that
easy to read, since so much is just the renames.  But Eric Biggers
noticed that it's not just all renames: the initialization of the
xts_tweak had been broken too, using the inode number rather than the
page offset.

That's not right - it makes the xfs_tweak the same for all pages of each
inode.  It _might_ make sense to make the xfs_tweak contain both the
offset _and_ the inode number, but not just the inode number.
Reported-by: NEric Biggers <ebiggers3@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb
* remove from the list _before_ orangefs_unmount() - request_mutex
in the latter will make sure that nothing observed in the loop in
ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end
of loop
* on removal, keep the forward pointer and zero the back one.  That
way we can drop and regain the spinlock in the loop body (again,
ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the
rest of the list.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

Error should only be returned if nothing had been read/written.
Otherwise we need to report a short read/write instead.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

a) open files can't have NULL inodes
b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute.
c) make_bad_inode() on lseek()?
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

just have it return the slot number or -E... - the caller checks
the sign anyway
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

it's always __orangefs_bufmap
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

no point, really - we couldn't keep those across the calls of
getdents(); it would be too easy to DoS, having all slots exhausted.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMike Marshall <hubcap@omnibond.com>

Now function ocfs2_replay_truncate_records() first modifies tl_used,
then calls ocfs2_extend_trans() to extend transactions for gd and alloc
inode used for freeing clusters.  jbd2_journal_restart() may be called
and it may happen that tl_used in truncate log is decreased but the
clusters are not freed, which means these clusters are lost.  So we
should avoid extending transactions in these two operations.
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Acked-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

I found that jbd2_journal_restart() is called in some places without
keeping things consistently before.  However, jbd2_journal_restart() may
commit the handle's transaction and restart another one.  If the first
transaction is committed successfully while another not, it may cause
filesystem inconsistency or read only.  This is an effort to fix this
kind of problems.

This patch (of 3):

The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
  -> ocfs2_start_trans
  -> ocfs2_remove_extent
     -> ocfs2_truncate_rec
       -> ocfs2_extend_rotate_transaction
         -> jbd2_journal_restart if jbd2_journal_extend fail
       -> ocfs2_rotate_tree_left
         -> ocfs2_remove_rightmost_path
             -> ocfs2_extend_rotate_transaction
               -> ocfs2_unlink_subtree
                -> ocfs2_update_edge_lengths
                  -> ocfs2_extend_trans
                    -> jbd2_journal_restart if jbd2_journal_extend fail
  -> ocfs2_et_update_clusters
  -> ocfs2_commit_trans

jbd2_journal_restart() may be called and it may happened that the buffers
dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in
ocfs2_et_update_clusters() are not, the total clusters on extent tree and
i_clusters in ocfs2_dinode is inconsistency.  So the clusters got from
ocfs2_dinode is incorrect, and it also cause read-only problem when call
ocfs2_commit_truncate() with the error message: "Inode %llu has empty
extent block at %llu".

We should extend enough credits for function ocfs2_remove_rightmost_path
and ocfs2_update_edge_lengths to avoid this inconsistency.
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Acked-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have found a bug when two nodes doing umount one after another.

1) Node 1 migrate a lockres that has 3 locks in grant queue such as
   N2(PR)<->N3(NL)<->N4(PR) to N2.  After migration, lvb of the lock
   N3(NL) and N4(PR) are empty on node 2 because migration target do not
   copy lvb to these two lock.

2) Node 3 want to convert to PR, it can be granted in
   __dlmconvert_master(), and the order of these locks is unchanged.  The
   lvb of the lock N3(PR) on node 2 is copyed from lockres in function
   dlm_update_lvb() while the lvb of lock N4(PR) is still empty.

3) Node 2 want to leave domain, it will migrate this lockres to node 3.
   Then node 2 will trigger the BUG in dlm_prepare_lvb_for_migration()
   when adding the lock N4(PR) to mres with the following message because
   the lvb of mres is already copied from lock N3(PR), but the lvb of lock
   N4(PR) is empty.

"Mismatched lvb in lock cookie=%u:%llu, name=%.*s, node=%u"

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Nxuejiufei <xuejiufei@huawei.com>
Acked-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In update_backups() there exists a problem of crossing the boundary as
follows:

we assume that lun will be resized to 1TB(cluster_size is 32kb), it will
include 0~33554431 cluster, in update_backups func, it will backup super
block in location of 1TB which is the 33554432th cluster, so the
phenomenon of crossing the boundary happens.
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Xue jiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a deadlock, as follows:

  Node 1                Node 2                  Node 3
1)volume a and b are    only mount vol a        only mount vol b
  mounted

2)                      start to mount b        start to mount a

3)                      check hb of Node 3      check hb of Node 2
                        in vol a, qs_holds++    in vol b, qs_holds++

4) -------------------- all nodes' network down --------------------

5)                      progress of mount b     the same situation as
                        failed, and then call   Node 2
                        ocfs2_dismount_volume.
                        but the process is hung,
                        since there is a work
                        in ocfs2_wq cannot beo
                        completed. This work is
                        about vol a, because
                        ocfs2_wq is global wq.
                        BTW, this work which is
                        scheduled in ocfs2_wq is
                        ocfs2_orphan_scan_work,
                        and the context in this work
                        needs to take inode lock
                        of orphan_dir, because
                        lockres owner are Node 1 and
                        all nodes' nework has been down
                        at the same time, so it can't
                        get the inode lock.

6)                      Why can't this node be fenced
                        when network disconnected?
                        Because the process of
                        mount is hung what caused qs_holds
                        is not equal 0.

Because all works in the ocfs2_wq are relative to the super block.

The solution is to change the ocfs2_wq from global to local.  In other
words, move it into struct ocfs2_super.
Signed-off-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Xue jiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When master handles convert request, it queues ast first and then
returns status.  This may happen that the ast is sent before the request
status because the above two messages are sent by two threads.  And
right after the ast is sent, if master down, it may trigger BUG in
dlm_move_lockres_to_recovery_list in the requested node because ast
handler moves it to grant list without clear lock->convert_pending.  So
remove BUG_ON statement and check if the ast is processed in
dlmconvert_remote.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reported-by: NYiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a race window between dlmconvert_remote and
dlm_move_lockres_to_recovery_list, which will cause a lock with
OCFS2_LOCK_BUSY in grant list, thus system hangs.

dlmconvert_remote
{
        spin_lock(&res->spinlock);
        list_move_tail(&lock->list, &res->converting);
        lock->convert_pending = 1;
        spin_unlock(&res->spinlock);

        status = dlm_send_remote_convert_request();
        >>>>>> race window, master has queued ast and return DLM_NORMAL,
               and then down before sending ast.
               this node detects master down and calls
               dlm_move_lockres_to_recovery_list, which will revert the
               lock to grant list.
               Then OCFS2_LOCK_BUSY won't be cleared as new master won't
               send ast any more because it thinks already be authorized.

        spin_lock(&res->spinlock);
        lock->convert_pending = 0;
        if (status != DLM_NORMAL)
                dlm_revert_pending_convert(res, lock);
        spin_unlock(&res->spinlock);
}

In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set
(res is still in recovering) or res master changed (new master has
finished recovery), reset the status to DLM_RECOVERING, then it will
retry convert.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reported-by: NYiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code should call ocfs2_free_alloc_context() to free meta_ac &
data_ac before calling ocfs2_run_deallocs().  Because
ocfs2_run_deallocs() will acquire the system inode's i_mutex hold by
meta_ac.  So try to release the lock before ocfs2_run_deallocs().

Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.")
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Acked-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When doing append direct write in an already allocated cluster, and fast
path in ocfs2_dio_get_block() is triggered, function
ocfs2_dio_end_io_write() will be skipped as there is no context
allocated.

As a result, the disk file size will not be changed as it should be.
The solution is to skip fast path when we are about to change file size.

Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.")
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Acked-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Take ip_alloc_sem to prevent concurrent access to extent tree, which may
cause the extent tree in an unstable state.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the current implementation of unaligned aio+dio, lock order behave as
follow:

in user process context:
  -> call io_submit()
    -> get i_mutex
		<== window1
      -> get ip_unaligned_aio
        -> submit direct io to block device
    -> release i_mutex
  -> io_submit() return

in dio work queue context(the work queue is created in __blockdev_direct_IO):
  -> release ip_unaligned_aio
		<== window2
    -> get i_mutex
      -> clear unwritten flag & change i_size
    -> release i_mutex

There is a limitation to the thread number of dio work queue.  256 at
default.  If all 256 thread are in the above 'window2' stage, and there
is a user process in the 'window1' stage, the system will became
deadlock.  Since the user process hold i_mutex to wait ip_unaligned_aio
lock, while there is a direct bio hold ip_unaligned_aio mutex who is
waiting for a dio work queue thread to be schedule.  But all the dio
work queue thread is waiting for i_mutex lock in 'window2'.

This case only happened in a test which send a large number(more than
256) of aio at one io_submit() call.

My design is to remove ip_unaligned_aio lock.  Change it to a sync io
instead.  Just like ip_unaligned_aio lock, serialize the unaligned aio
dio.

[akpm@linux-foundation.org: remove OCFS2_IOCB_UNALIGNED_IO, per Junxiao Bi]
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write:
 * remove append dio check: it will be checked in ocfs2_direct_IO()
 * remove file hole check: file hole is supported for now
 * remove inline data check: it will be checked in ocfs2_direct_IO()
 * remove the full_coherence check when append dio: we will get the
   inode_lock in ocfs2_dio_get_block, there is no need to fall back to
   buffer io to ensure the coherence semantics.

Now the drop dio procedure is gone.  :)

[akpm@linux-foundation.org: remove unused label]
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are mainly three issues in the direct io code path after commit
24c40b32 ("ocfs2: implement ocfs2_direct_IO_write"):

  * Does not support sparse file.
  * Does not support data ordering.  eg: when write to a file hole, it
    will alloc extent first.  If system crashed before io finished, data
    will corrupt.
  * Potential risk when doing aio+dio.  The -EIOCBQUEUED return value is
    likely to be ignored by ocfs2_direct_IO_write().

To resolve above problems, re-design direct io code with following ideas:
  * Use buffer io to fill in holes.  And this will make better
    performance also.
  * Clear unwritten after direct write finished.  So we can make sure
    meta data changes after data write to disk.  (Unwritten extent is
    invisible to user, from user's view, meta data is not changed when
    allocate an unwritten extent.)
  * Clear ocfs2_direct_IO_write().  Do all ending work in end_io.

This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4
test cases of ltp.

For performance improvement, see following test result:
ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/.
The original way:
  + rm /mnt/test.img -f
  + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct
  1048576+0 records in
  1048576+0 records out
  4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s
  + rm /mnt/test.img -f
  + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct
  16384+0 records in
  16384+0 records out
  4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s

After this patch:
  + rm /mnt/test.img -f
  + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct
  1048576+0 records in
  1048576+0 records out
  4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s
  + rm /mnt/test.img -f
  + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct
  16384+0 records in
  16384+0 records out
  4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.

There is still one issue in the direct write procedure.

phase 1: alloc extent with UNWRITTEN flag
phase 2: submit direct data to disk, add zero page to page cache
phase 3: clear UNWRITTEN flag when data has been written to disk

When there are 2 direct write A(0~3KB),B(4~7KB) writing to the same
cluster 0~7KB (cluster size 8KB).  Write request A arrive phase 2 first,
it will zero the region (4~7KB).  Before request A enter to phase 3,
request B arrive phase 2, it will zero region (0~3KB).  This is just like
request B steps request A.

To resolve this issue, we should let request B knows this cluster is already
under zero, to prevent it from steps the previous write request.

This patch will add function ocfs2_unwritten_check() to do this job.  It
will record all clusters that are under direct write(it will be recorded
in the 'ip_unwritten_list' member of inode info), and prevent the later
direct write writing to the same cluster to do the zero work again.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.

Direct io needs to get the physical address from write_begin, to map the
user page.  This patch is to change the arg 'phys' of
ocfs2_write_cluster to a pointer, so it can be retrieved to write_begin.
And we can retrieve it to the direct io procedure.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.

Append direct io do not change i_size in get block phase.  It only move
to orphan when starting write.  After data is written to disk, it will
delete itself from orphan and update i_size.  So skip i_size change
section in write_begin for direct io.

And when there is no extents alloc, no meta data changes needed for
direct io (since write_begin start trans for 2 reason: alloc extents &
change i_size.  Now none of them needed).  So we can skip start trans
procedure.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.

Direct io data will not appear in buffer.  The w_target_page member will
not be filled by direct io.  So avoid to use it when it's NULL.  Unlinke
buffer io and mmap, direct io will call write_begin with more than 1
page a time.  So the target_index is not sufficient to describe the
actual data.  change it to a range start at target_index, end in
end_index.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.

There is a problem in ocfs2's direct io implement: if system crashed
after extents allocated, and before data return, we will get a extent
with dirty data on disk.  This problem violate the journal=order
semantics, which means meta changes take effect after data written to
disk.  To resolve this issue, direct write can use the UNWRITTEN flag to
describe a extent during direct data writeback.  The direct write
procedure should act in the following order:

phase 1: alloc extent with UNWRITTEN flag
phase 2: submit direct data to disk, add zero page to page cache
phase 3: clear UNWRITTEN flag when data has been written to disk

This patch is to change the 'c_unwritten' member of
ocfs2_write_cluster_desc to 'c_clear_unwritten'.  Means whether to clear
the unwritten flag.  It do not care if a extent is allocated or not.
And use 'c_new' to specify a newly allocated extent.  So the direct io
procedure can use c_clear_unwritten to control the UNWRITTEN bit on
extent.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patchset: fix ocfs2 direct io code patch to support sparse file and data
ordering semantics

The idea is to use buffer io(more precisely use the interface
ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work
beyond block size.  And clear UNWRITTEN flag until direct io data has
been written to disk, which can prevent data corruption when system
crashed during direct write.

And we will also archive a better performance: eg.  dd direct write new
file with block size 4KB: before this patchset:
  2.5 MB/s
after this patchset:
  66.4 MB/s

This patch (of 8):

To support direct io in ocfs2_write_begin_nolock &
ocfs2_write_end_nolock.

Remove unused args filp & flags.  Add new arg type.  The type is one of
buffer/direct/mmap.  Indicate 3 way to perform write.  buffer/mmap type
has implemented.  direct type will be implemented later.
Signed-off-by: NRyan Ding <ryan.ding@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a regression issue and caused the following kernel panic when do
ocfs2 multiple test.

  BUG: unable to handle kernel paging request at 00000002000800c0
  IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160
  PGD 7bbe5067 PUD 0
  Oops: 0000 [#1] SMP
  Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront
  CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1
  Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014
  task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000
  RIP: 0010:[<ffffffff81192978>]  [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160
  RSP: 0018:ffff88007aed3a48  EFLAGS: 00010282
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991
  RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330
  RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0
  R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00
  R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7
  FS:  0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0
  Call Trace:
    __d_alloc+0x2f/0x1a0
    d_alloc+0x17/0x80
    lookup_dcache+0x8a/0xc0
    path_openat+0x3c3/0x1210
    do_filp_open+0x80/0xe0
    do_sys_open+0x110/0x200
    SyS_open+0x19/0x20
    do_syscall_64+0x72/0x230
    entry_SYSCALL64_slow_path+0x25/0x25
  Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63
  RIP   kmem_cache_alloc+0x78/0x160
  CR2: 00000002000800c0
  ---[ end trace 823969e602e4aaac ]---

Fixes: a4a1dfa4("ocfs2/cluster: fix memory leak in o2hb_region_release")
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

If dentry has no lease, ceph_d_revalidate() previously return 0.
This causes VFS to invalidate the dentry and create a new dentry
for later lookup. Invalidating a dentry also detach any underneath
mount points. So mount point inside cephfs can disapear mystically
(even the mount point is not modified by other hosts).

The fix is using lookup request to revalidate dentry without lease.
This can partly solve the mount points disapear issue (as long as
the mount point is not modified by other hosts)
Signed-off-by: NYan, Zheng <zyan@redhat.com>

use vfs helper dget_parent() instead
Signed-off-by: NYan, Zheng <zyan@redhat.com>

When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.

The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)

Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

It's uselese because MDS reply does not carry any vxattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Now __ceph_open_session() only accepts closed client. An opened
client will tigger BUG_ON().
Signed-off-by: NYan, Zheng <zyan@redhat.com>

If page->mapping is NULL, releasepage() callback does not get called.
Remove the unnecessary NULL check to make static code analysis tool
happy
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Directory inode's i_size is used by readdir cache.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Readdir cache uses page cache to save dentry pointers. When adding
dentry pointers to middle of a page, we need to make sure the page
already exists. Otherwise the beginning part of the page will be
invalid pointers.
Signed-off-by: NYan, Zheng <zyan@redhat.com>