Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 18 5月, 2018 1 次提交
  3. 16 5月, 2018 1 次提交
    • K
      perf parse-events: Handle uncore event aliases in small groups properly · 3cdc5c2c
      由 Kan Liang 提交于 
      Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:

  perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
  #           time             counts unit events
       1.000447342      <not counted>      unc_m_cas_count.all
       1.000447342      <not counted>      unc_m_clockticks
       2.000740654      <not counted>      unc_m_cas_count.all
       2.000740654      <not counted>      unc_m_clockticks

The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.

An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.

The right way is to split the big group into multiple small groups which
only include the events from the same PMU.

Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.

With the patch:
  #           time             counts unit events
     1.001557653            140,833      unc_m_cas_count.all
     1.001557653      1,330,231,332      unc_m_clockticks
     2.002709483             85,007      unc_m_cas_count.all
     2.002709483      1,429,494,563      unc_m_clockticks
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3cdc5c2c
  5. 11 5月, 2018 1 次提交
    • A
      perf tools: Add missing newline when parsing empty BPF proggie · c23080a6
      由 Arnaldo Carvalho de Melo 提交于 
      This is not specific to BPF but was found when parsing a .c BPF proggie
that while valid, had no events attached to tracepoints, kprobes, etc:

Very minimal file that perf's BPF code can compile:

  # cat empty.c
  char _license[] __attribute__((section("license"), used)) = "GPL";
  int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
  #

Before this patch:

  # perf trace -e empty.c
  WARNING: event parser found nothinginvalid or unsupported event: 'empty.c'
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
    #

After:

  # perf trace -e empty.c
  WARNING: event parser found nothing
  invalid or unsupported event: 'empty.c'
  Run 'perf list' for a list of valid events

   Usage: perf trace [<options>] [<command>]
      or: perf trace [<options>] -- <command> [<options>]
      or: perf trace record [<options>] [<command>]
      or: perf trace record [<options>] -- <command> [<options>]

      -e, --event <event>   event/syscall selector. use 'perf list' to list available events
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8ysughiz00h6mjpcot04qyjj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c23080a6
  7. 19 3月, 2018 1 次提交
    • J
      perf tools: Fix snprint warnings for gcc 8 · 77f18153
      由 Jiri Olsa 提交于 
      With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:

  tests/mem.c: In function ‘check’:
  tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
        up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
    snprintf(failure, sizeof failure, "unexpected %s", out);

The gcc docs says:

 To avoid the warning either use a bigger buffer or handle the
 function's return value which indicates whether or not its output
 has been truncated.

Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      77f18153
  9. 08 3月, 2018 2 次提交
    • A
      perf pmu: Auto-merge PMU events created by prefix or glob match · c199c11d
      由 Agustin Vega-Frias 提交于 
      Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce8449 (perf stat: Only auto-merge events
that are PMU aliases).

Non-merging of legacy events is preserved:

    $ perf stat -ag -e cache-misses,cache-misses sleep 1

     Performance counter stats for 'system wide':

                86,323      cache-misses
                86,323      cache-misses

           1.002623307 seconds time elapsed

But prefix or glob matching auto-merges the events created:

    $ perf stat -a -e l3cache/read-miss/ sleep 1

     Performance counter stats for 'system wide':

                   328      l3cache/read-miss/

           1.002627008 seconds time elapsed

    $ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1

     Performance counter stats for 'system wide':

                   172      l3cache/read-miss/

           1.002627008 seconds time elapsed

As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:

    $ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1

     Performance counter stats for 'system wide':

                    67      l3cache/read-miss/
                    67      l3cache/read-miss/
                    63      l3cache/read-miss/
                    60      l3cache/read-miss/

           1.002622192 seconds time elapsed
Signed-off-by: NAgustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c199c11d
    • A
      perf pmu: Display pmu name when printing unmerged events in stat · 8c5421c0
      由 Agustin Vega-Frias 提交于 
      To simplify creation of events accross multiple instances of the same
type of PMU stat supports two methods for creating multiple events from
a single event specification:

1. A prefix or glob can be used in the PMU name.
2. Aliases, which are listed immediately after the Kernel PMU events
   by perf list, are used.

When the --no-merge option is passed and these events are displayed
individually the PMU name is lost and it's not possible to see which
count corresponds to which pmu:

    $ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null

     Performance counter stats for 'system wide':

                    67      l3cache/read-miss/
                    67      l3cache/read-miss/
                    63      l3cache/read-miss/
                    60      l3cache/read-miss/

           0.001675706 seconds time elapsed

    $ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null

     Performance counter stats for 'system wide':

                    12      l3cache_read_miss
                    17      l3cache_read_miss
                    10      l3cache_read_miss
                     8      l3cache_read_miss

           0.001661305 seconds time elapsed

This change adds the original pmu name to the event. For dynamic pmu
events the pmu name is restored in the event name:

    $ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null

     Performance counter stats for 'system wide':

                    63      l3cache_0_3/read-miss/
                    74      l3cache_0_1/read-miss/
                    64      l3cache_0_2/read-miss/
                    74      l3cache_0_0/read-miss/

           0.001675706 seconds time elapsed

For alias events the name is added after the event name:

    $ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null

     Performance counter stats for 'system wide':

                    10      l3cache_read_miss [l3cache_0_3]
                    12      l3cache_read_miss [l3cache_0_1]
                    10      l3cache_read_miss [l3cache_0_2]
                    17      l3cache_read_miss [l3cache_0_0]

           0.001661305 seconds time elapsed
Signed-off-by: NAgustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I8056b9eda74bda33e95065056167ad96e97cb1fb
Link: http://lkml.kernel.org/r/1520345084-42646-3-git-send-email-agustinv@codeaurora.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8c5421c0
  11. 25 1月, 2018 1 次提交
  13. 29 11月, 2017 1 次提交
  15. 17 11月, 2017 1 次提交
  17. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  19. 10 10月, 2017 1 次提交
    • M
      perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU · 66ec1191
      由 Mark Rutland 提交于 
      Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.

$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true

In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.

This is an unintended side effect of commit:

  e3ba76de ("perf tools: Force uncore events to system wide monitoring)

... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.

This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:

 7e3fcffe ("perf pmu: Support alternative sysfs cpumask")

Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76de ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      66ec1191
  21. 18 9月, 2017 1 次提交
  23. 13 9月, 2017 2 次提交
    • A
      perf list: Add metric groups to perf list · 71b0acce
      由 Andi Kleen 提交于 
      Add code to perf list to print metric groups, and metrics
that don't have an event name. The metricgroup code collects
the eventgroups and events into a rblist, and then prints
them according to the configured filters.

The metricgroups are printed by default, but can be
limited by perf list metric or perf list metricgroup

  % perf list metricgroup
  ..
  Metric Groups:

  DSB:
    DSB_Coverage
          [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
  FLOPS:
    GFLOPs
          [Giga Floating Point Operations Per Second]
  Frontend:
    IFetch_Line_Utilization
          [Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions]
  Frontend_Bandwidth:
    DSB_Coverage
          [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
  Memory_BW:
    MLP
          [Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)]

v2: Check return value of asprintf to fix warning on FC26
Fix key in lookup/addition for the groups list
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-8-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      71b0acce
    • A
      perf tools: Support weak groups in 'perf stat' · 5a5dfe4b
      由 Andi Kleen 提交于 
      Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.

User tools usually don't understand all these restrictions.

Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.

Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.

In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.

So far the weak group is only implemented for perf stat, not for record.

Here's an unschedulable group (on IvyBridge with SMT on)

  % perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1

        73,806,067      branches
         4,848,144      branch-misses             #    6.57% of all branches
        14,754,458      l1d.replacement
        24,905,558      l2_lines_in.all
   <not supported>      l2_rqsts.all_code_rd         <------- will never report anything

With the weak group:

  % perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1

       125,366,055      branches                                                      (80.02%)
         9,208,402      branch-misses             #    7.35% of all branches          (80.01%)
        24,560,249      l1d.replacement                                               (80.00%)
        43,174,971      l2_lines_in.all                                               (80.05%)
        31,891,457      l2_rqsts.all_code_rd                                          (79.92%)

The extra event scheduled with some extra multiplexing

v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.

Committer testing:

Before:

  # perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1

   Performance counter stats for 'system wide':

     <not counted>      branches
     <not counted>      branch-misses
     <not counted>      l1d.replacement
     <not counted>      l2_lines_in.all
   <not supported>      l2_rqsts.all_code_rd

       1.002147212 seconds time elapsed

  # perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1

   Performance counter stats for 'system wide':

        83,207,892      branches
        11,065,444      l1d.replacement
        28,484,024      l2_lines_in.all
        12,186,179      l2_rqsts.all_code_rd

       1.001739493 seconds time elapsed

After:

  # perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1

   Performance counter stats for 'system wide':

       543,323,909      branches                                                      (80.01%)
        27,100,512      branch-misses             #    4.99% of all branches          (80.02%)
        50,402,905      l1d.replacement                                               (80.03%)
        67,385,892      l2_lines_in.all                                               (80.01%)
        21,352,885      l2_rqsts.all_code_rd                                          (79.94%)

       1.001086658 seconds time elapsed

  #
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5a5dfe4b
  25. 02 9月, 2017 1 次提交
    • A
      perf stat: Only auto-merge events that are PMU aliases · 63ce8449
      由 Arnaldo Carvalho de Melo 提交于 
      Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:

   # perf stat -e cycles -e cycles -e cycles usleep 1

   Performance counter stats for 'usleep 1':

         3,269,652      cycles

       0.000884123 seconds time elapsed

  #

And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:

  # perf stat -e cycles -e cycles -e cycles usleep 1

   Performance counter stats for 'usleep 1':

         1,472,837      cycles
         1,472,837      cycles
         1,472,837      cycles

       0.001764870 seconds time elapsed

  #
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2d ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      63ce8449
  27. 18 8月, 2017 3 次提交
  29. 19 7月, 2017 1 次提交
  31. 25 4月, 2017 2 次提交
  33. 20 4月, 2017 5 次提交
  35. 23 3月, 2017 3 次提交
    • A
      perf list: Move extra details printing to new option · bf874fcf
      由 Andi Kleen 提交于 
      Move the printing of perf expressions and internal events to a new
clearer --details flag, instead of lumping it together with other debug
options in --debug. This makes it clearer to use.

Before

  perf list --debug
  ...
  unc_m_power_critical_throttle_cycles
         [Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
          uncore_imc_2/event=0x86/  MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.

after

  perf list --details
  ...
  unc_m_power_critical_throttle_cycles
         [Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
          uncore_imc_2/event=0x86/  MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bf874fcf
    • A
      perf pmu: Add support for MetricName JSON attribute · 96284814
      由 Andi Kleen 提交于 
      Add support for a new JSON event attribute to name MetricExpr for better
output in perf stat.

If the event has no MetricName it uses the normal event name instead to
describe the metric.

Before

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
           time unc_p_freq_max_os_cycles
     1.000149775     15.7
     2.000344807     19.3
     3.000502544     16.7
     4.000640656      6.6
     5.000779955      9.9

After

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
           time freq_max_os_cycles %
     1.000149775     15.7
     2.000344807     19.3
     3.000502544     16.7
     4.000640656      6.6
     5.000779955      9.9
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-13-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      96284814
    • A
      perf stat: Output JSON MetricExpr metric · 37932c18
      由 Andi Kleen 提交于 
      Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.

Transfer the MetricExpr information from the alias to the evsel.

We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.

Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.

Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.

Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.

There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
       1.000147889        800,085,181      unc_p_clockticks
       1.000147889         93,126,241      unc_p_freq_max_os_cycles  #     11.6
       2.000448381        800,218,217      unc_p_clockticks
       2.000448381        142,516,095      unc_p_freq_max_os_cycles  #     17.8
       3.000639852        800,243,057      unc_p_clockticks
       3.000639852        162,292,689      unc_p_freq_max_os_cycles  #     20.3

  % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
  #    time         freq_max_os_cycles %
       1.000127077      0.9
       2.000301436      0.7
       3.000456379      0.0

v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix.  Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      37932c18
  37. 22 3月, 2017 2 次提交
  39. 04 3月, 2017 1 次提交
    • J
      perf tools: Force uncore events to system wide monitoring · e3ba76de
      由 Jiri Olsa 提交于 
      Make system wide (-a) the default option if no target was specified and
one of following conditions is met:

  - there's no workload specified (current behaviour)
  - there is workload specified but all requested
    events are system wide ones

Mixed events core/uncore with workload:

  $ perf stat -e 'uncore_cbox_0/clockticks/,cycles' sleep 1

   Performance counter stats for 'sleep 1':

     <not supported>      uncore_cbox_0/clockticks/
             980,489      cycles

         1.000897406 seconds time elapsed

Uncore event with workload:

  $ perf stat -e 'uncore_cbox_0/clockticks/' sleep 1

   Performance counter stats for 'system wide':

  281,473,897,192,670      uncore_cbox_0/clockticks/

         1.000833784 seconds time elapsed

Committer note:

When testing I realized the default case for !root, i.e. no events
passed via -e, was broke by v2 of this patch, reported and after a
patch provided by Jiri it is back working:

  [acme@jouet linux]$ perf stat usleep 1

   Performance counter stats for 'usleep 1':

         0.401335      task-clock:u (msec)     #   0.297 CPUs utilized
                0      context-switches:u      #   0.000 K/sec
                0      cpu-migrations:u        #   0.000 K/sec
               48      page-faults:u           #   0.120 M/sec
          458,146      cycles:u                #   1.142 GHz
          245,113      instructions:u          #   0.54  insn per cycle
           47,991      branches:u              # 119.578 M/sec
            4,022      branch-misses:u         #   8.38% of all branches

      0.001350029 seconds time elapsed

  [acme@jouet linux]$
Suggested-and-Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170227094818.GA12764@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e3ba76de
  41. 18 2月, 2017 2 次提交
  43. 15 2月, 2017 1 次提交
  45. 08 2月, 2017 5 次提交