- 03 8月, 2016 40 次提交
-
-
由 Petr Tesarik 提交于
If a crash kernel is loaded, do not crash the running domain. This is needed if the kernel is loaded with crash_kexec_post_notifiers, because panic notifiers are run before __crash_kexec() in that case, and this Xen hook prevents its being called later. [akpm@linux-foundation.org: build fix: unconditionally include kexec.h] Link: http://lkml.kernel.org/r/20160713122000.14969.99963.stgit@hananiah.suse.czSigned-off-by: NPetr Tesarik <ptesarik@suse.com> Cc: Juergen Gross <jgross@suse.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eric Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Petr Tesarik 提交于
Provide a wrapper function to be used by kernel code to check whether a crash kernel is loaded. It returns the same value that can be seen in /sys/kernel/kexec_crash_loaded by userspace programs. I'm exporting the function, because it will be used by Xen, and it is possible to compile Xen modules separately to enable the use of PV drivers with unmodified bare-metal kernels. Link: http://lkml.kernel.org/r/20160713121955.14969.69080.stgit@hananiah.suse.czSigned-off-by: NPetr Tesarik <ptesarik@suse.com> Cc: Juergen Gross <jgross@suse.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eric Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hidehiro Kawai 提交于
crash_kexec_post_notifiers ia a boot option which controls whether the 1st kernel calls panic notifiers or not before booting the 2nd kernel. However, there is no need to limit it to being modifiable only at boot time. So, use core_param instead of early_param. Link: http://lkml.kernel.org/r/20160705113327.5864.43139.stgit@softrsSigned-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Provide kexec with the boot view of memory by overriding the normal kexec translation functions added in a previous patch. We also need to fix a call to memblock in machine_kexec_prepare() so that we provide it with a running-view physical address rather than a boot- view physical address. Link: http://lkml.kernel.org/r/E1b8koa-0004Hl-Ey@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Keerthy <j-keerthy@ti.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitaly Andrianov 提交于
This commit adds definition for cpu_on, cpu_off and cpu_suspend commands. These definitions must match the corresponding PSCI definitions in boot monitor. Having those command and corresponding PSCI support in boot monitor allows run time CPU hot plugin. Link: http://lkml.kernel.org/r/E1b8koV-0004Hf-2j@rmk-PC.armlinux.org.ukSigned-off-by: NKeerthy <j-keerthy@ti.com> Signed-off-by: NVitaly Andrianov <vitalya@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Pratyush Anand <panand@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
kexec physical addresses are the boot-time view of the system. For certain ARM systems (such as Keystone 2), the boot view of the system does not match the kernel's view of the system: the boot view uses a special alias in the lower 4GB of the physical address space. To cater for these kinds of setups, we need to translate between the boot view physical addresses and the normal kernel view physical addresses. This patch extracts the current transation points into linux/kexec.h, and allows an architecture to override the functions. Due to the translations required, we unfortunately end up with six translation functions, which are reduced down to four that the architecture can override. [akpm@linux-foundation.org: kexec.h needs asm/io.h for phys_to_virt()] Link: http://lkml.kernel.org/r/E1b8koP-0004HZ-Vf@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Keerthy <j-keerthy@ti.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
On PAE systems (eg, ARM LPAE) the vmcore note may be located above 4GB physical on 32-bit architectures, so we need a wider type than "unsigned long" here. Arrange for paddr_vmcoreinfo_note() to return a phys_addr_t, thereby allowing it to be located above 4GB. This makes no difference for kexec-tools, as they already assume a 64-bit type when reading from this file. Link: http://lkml.kernel.org/r/E1b8koK-0004HS-K9@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: NPratyush Anand <panand@redhat.com> Acked-by: NBaoquan He <bhe@redhat.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Ensure that user memory sizes do not wrap around when validating the user input, which can lead to the following input validation working incorrectly. [akpm@linux-foundation.org: fix it for kexec-return-error-number-directly.patch] Link: http://lkml.kernel.org/r/E1b8koF-0004HM-5x@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: NPratyush Anand <panand@redhat.com> Acked-by: NBaoquan He <bhe@redhat.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
If we are unable to find a suitable page when allocating the control page, do not invoke the OOM-killer: killing processes probably isn't going to help. Link: http://lkml.kernel.org/r/E1b8ko9-0004HG-R5@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: NPratyush Anand <panand@redhat.com> Acked-by: NBaoquan He <bhe@redhat.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Advertise the location of bootable RAM to kexec-tools. kexec needs to know where it can place the kernel in RAM, and so be executable when the system needs to jump into it. Advertise these areas in /proc/iomem with a "System RAM (boot alias)" tag. Link: http://lkml.kernel.org/r/E1b8ko4-0004HA-GF@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: NPratyush Anand <panand@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Advertise a resource which describes where the crash kernel is located in the boot view of RAM. This allows kexec-tools to have this vital information. Link: http://lkml.kernel.org/r/E1b8knz-0004H4-Bd@rmk-PC.armlinux.org.ukSigned-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Baoquan He <bhe@redhat.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minfei Huang 提交于
This is a cleanup patch to make kexec more clear to return error number directly. The variable result is useless, because there is no other function's return value assignes to it. So remove it. Link: http://lkml.kernel.org/r/1464179273-57668-1-git-send-email-mnghuan@gmail.comSigned-off-by: NMinfei Huang <mnghuan@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Xunlei Pang <xlpang@redhat.com> Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geliang Tang 提交于
Fix code comment for cpumask_parse(). Link: http://lkml.kernel.org/r/71aae2c60ae5dae0cf554199ce6aea8f88c69347.1465380581.git.geliangtang@gmail.comSigned-off-by: NGeliang Tang <geliangtang@gmail.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Blanchard 提交于
Many targets enable CONFIG_DEBUG_STACK_USAGE, and while the information is useful, it isn't worthy of pr_warn(). Reduce it to pr_info(). Link: http://lkml.kernel.org/r/1466982072-29836-1-git-send-email-anton@ozlabs.orgSigned-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Lutomirski 提交于
In general, there's no need for the "restore sigmask" flag to live in ti->flags. alpha, ia64, microblaze, powerpc, sh, sparc (64-bit only), tile, and x86 use essentially identical alternative implementations, placing the flag in ti->status. Replace those optimized implementations with an equally good common implementation that stores it in a bitfield in struct task_struct and drop the custom implementations. Additional architectures can opt in by removing their TIF_RESTORE_SIGMASK defines. Link: http://lkml.kernel.org/r/8a14321d64a28e40adfddc90e18a96c086a6d6f9.1468522723.git.luto@kernel.orgSigned-off-by: NAndy Lutomirski <luto@kernel.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Mahoney 提交于
new_insert_key only makes any sense when it's associated with a new_insert_ptr, which is initialized to NULL and changed to a buffer_head when we also initialize new_insert_key. We can key off of that to avoid the uninitialized warning. Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.comSigned-off-by: NJeff Mahoney <jeffm@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
The header file "include/linux/nilfs2_fs.h" is composed of parts for ioctl and disk format, and both are intended to be shared with user space programs. This moves them to the uapi directory "include/uapi/linux" splitting the file to "nilfs2_api.h" and "nilfs2_ondisk.h". The following minor changes are accompanied by this migration: - nilfs_direct_node struct in nilfs2/direct.h is converged to nilfs2_ondisk.h because it's an on-disk structure. - inline functions nilfs_rec_len_from_disk() and nilfs_rec_len_to_disk() are moved to nilfs2/dir.c. Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Replace bit shifts by BIT macro for clarity. Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Variables ns_seg_seq, ns_segnum, ns_nextnum, ns_pseg_offset, ns_cno, ns_ctime, ns_nongc_ctime, and ns_ndirtyblks, are protected by ns_segctor_sem, but ns_sem is wrongly used by the nilfs sysfs code when reading these variables. This fixes the misuse and clarifies which semaphore protects them in the comment of the_nilfs struct. Link: http://lkml.kernel.org/r/1465825507-3407-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Move parser of snapshot mount option to a separate function nilfs_parse_snapshot_option(), replace simple_strtoull() with kstrtoull() to avoid checkpatch.pl warning "WARNING: simple_strtoull is obsolete, use kstrtoull instead", and refine the error message of the parser. Link: http://lkml.kernel.org/r/1464875891-5443-9-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Use cond_resched() instead of yield() in the loop of nilfs_transaction_lock() since the usage corresponds to the "be nice for others" case that the comment of yield() says. This removes the following checkpatch.pl warning: "WARNING: Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)" Link: http://lkml.kernel.org/r/1464875891-5443-8-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
When nilfs returned -EIO as an error code, it's not always clear if it came from the underlying block device or not. This will mend the issue by having low level I/O routines of nilfs output an error message when they detected an I/O error. Link: http://lkml.kernel.org/r/1464875891-5443-7-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Use nilfs_msg() to output warning messages and get rid of nilfs_warning() function. This also removes function names from the messages unless we embed them explicitly in format strings. Instead, some messages are revised to clarify the context. [arnd@arndb.de: avoid warning about unused variables] Link: http://lkml.kernel.org/r/20160615201945.3348205-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1464875891-5443-6-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Replace most use of printk() in nilfs2 implementation with nilfs_msg(), and reduce the following checkpatch.pl warning: "WARNING: Prefer [subsystem eg: netdev]_crit([subsystem]dev, ... then dev_crit(dev, ... then pr_crit(... to printk(KERN_CRIT ..." This patch also fixes a minor checkpatch warning "WARNING: quoted string split across lines" that often accompanies the prior warning, and amends message format as needed. Link: http://lkml.kernel.org/r/1464875891-5443-5-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Insert a back pointer to super block instance in nilfs object so that functions of nilfs2 easily refer to the super block instance. This simplifies replacement of printk() in the successive change. Link: http://lkml.kernel.org/r/1464875891-5443-4-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Define an own output routine to replace bare use of printk() function. The output routine is implemented with a macro and a helper function, which are named nilfs_msg() and __nilfs_msg(), respectively. __nilfs_msg() formats a message like "NILFS (<device-name>): <message>", prefixing it with a given log level, and terminates the statement with a newline. The "device-name" is optional to make it available in early stages; it will be omitted if a NULL pointer is passed to super block instance argument. nilfs_msg() wraps __nilfs_msg() and is removed if CONFIG_PRINTK is not set. Link: http://lkml.kernel.org/r/1464875891-5443-3-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Simplify nilfs_error(), an output function used to report critical issues in file system. This renames the original nilfs_error() function to __nilfs_error() and redefines it as a macro to hide its function name argument within the macro. Every call site of nilfs_error() is changed to strip __func__ argument except nilfs_bmap_convert_error(); nilfs_bmap_convert_error() directly calls __nilfs_error() because it inherits caller's function name. Link: http://lkml.kernel.org/r/1464875891-5443-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Wagner 提交于
Since the -Wincompatible-pointer-types is reported as error, alpha doesn't build anymore. Let's fix it in a minimal way. fs/binfmt_em86.c:73:35: error: passing argument 2 of `copy_strings_kernel' from incompatible pointer type [-Werror=incompatible-pointer-types] retval = copy_strings_kernel(1, &i_arg, bprm); ^ ^ fs/binfmt_em86.c:77:34: error: passing argument 2 of `copy_strings_kernel' from incompatible pointer type [-Werror=incompatible-pointer-types] retval = copy_strings_kernel(1, &i_name, bprm); ^ Link: http://lkml.kernel.org/r/1469525978-23359-1-git-send-email-wagi@monom.orgSigned-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
The vm_brk() alignment calculations should refuse to overflow. The ELF loader depending on this, but it has been fixed now. No other unsafe callers have been found. Link: http://lkml.kernel.org/r/1468014494-25291-3-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org> Reported-by: NHector Marco-Gisbert <hecmargi@upv.es> Cc: Ismael Ripoll Ripoll <iripoll@upv.es> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
A double-bug exists in the bss calculation code, where an overflow can happen in the "last_bss - elf_bss" calculation, but vm_brk internally aligns the argument, underflowing it, wrapping back around safe. We shouldn't depend on these bugs staying in sync, so this cleans up the bss padding handling to avoid the overflow. This moves the bss padzero() before the last_bss > elf_bss case, since the zero-filling of the ELF_PAGE should have nothing to do with the relationship of last_bss and elf_bss: any trailing portion should be zeroed, and a zero size is already handled by padzero(). Then it handles the math on elf_bss vs last_bss correctly. These need to both be ELF_PAGE aligned to get the comparison correct, since that's the expected granularity of the mappings. Since elf_bss already had alignment-based padding happen in padzero(), the "start" of the new vm_brk() should be moved forward as done in the original code. However, since the "end" of the vm_brk() area will already become PAGE_ALIGNed in vm_brk() then last_bss should get aligned here to avoid hiding it as a side-effect. Additionally makes a cosmetic change to the initial last_bss calculation so it's easier to read in comparison to the load_addr calculation above it (i.e. the only difference is p_filesz vs p_memsz). Link: http://lkml.kernel.org/r/1468014494-25291-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org> Reported-by: NHector Marco-Gisbert <hecmargi@upv.es> Cc: Ismael Ripoll Ripoll <iripoll@upv.es> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Allen Hubbe 提交于
If no filenames are given, then read the patch from stdin. Link: http://lkml.kernel.org/r/a8784f291ccb5067361992bf5d41ff6cfb0ce5cb.1469830917.git.allenbh@gmail.comSigned-off-by: NAllen Hubbe <allenbh@gmail.com> Acked-by: NJoe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Allen Hubbe 提交于
Signoff was not checked if the filename is '-', indicating reading the patch from stdin. Commands such as the below would not warn about a missing signoff, because the patch filename is '-'. This change allows checkpatch to warn about a missing signoff, even if the input filename is '-', but only if the patch has a commit message. git show --pretty=email | scripts/checkpatch.pl - A more common use of checkpatch with stdin is for piping git diff through checkpatch. The diff output would not contain a commit message, and therefore it would not contain a signoff line. For this common use case, a warning should not be printed about the missing signoff. With this change we will only warn about a missing signoff if the input contains a commit message. git diff | scripts/checkpatch.pl - Before this patch, a workaround for the first command was to refer to stdin by a name other than '-'. The workaround is not an elegant solution, because elsewhere checkpatch uses the fact that filename equals '-', such as in setting '$vname' to 'Your patch' for stdin. The command below would report "/dev/stdin has style problems" instead of "Your patch has style problems." git show --pretty=email | scripts/checkpatch.pl /dev/stdin Link: http://lkml.kernel.org/r/48be31e414bddc65bccfa6b1322359be9ba032eb.1469670589.git.allenbh@gmail.comSigned-off-by: NAllen Hubbe <allenbh@gmail.com> Acked-by: NJoe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Fix false positive warning of identifiers ending in signed with an = assignment of WARNING: Prefer 'signed int' to bare use of 'signed'. Link: http://lkml.kernel.org/r/6a0e24c3e9102337528ecfcbbe91a0eb5b4820ed.1469529497.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Reported-by: NAlan Douglas <alanjhd@gmail.com> Acked-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tomas Winkler 提交于
BIT macro cannot be exported to UAPI, don't complain about it. Link: http://lkml.kernel.org/r/1468707033-16173-1-git-send-email-tomas.winkler@intel.comSigned-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Using \b isn't good enough to isolate what appears to be a commit id in a commit message. Make sure there is a space or a quote like character after a continuous run of hexadecimal characters that could be a commit id. Link: http://lkml.kernel.org/r/fdd22b47463a21c21132edbb8aa35e372950a1e6.1468869915.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Sanitise the lines that contain c99 comments so that the error doesn't get emitted. Link: http://lkml.kernel.org/r/d4d22c34ad7bcc1bceb52f0742f76b7a6d585235.1468368420.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
These are also possible single line uses that exceed the generic maximum line length (typically 80 columns) Link: http://lkml.kernel.org/r/32a6a85fbd6161f1bb55ce176a464e44591afc5b.1468368420.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.orgSigned-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vikram Mulukutla 提交于
Some low memory systems with complex peripherals cannot afford to have the relatively large firmware images taking up valuable memory during suspend and resume. Change the internal implementation of firmware_class to disallow caching based on a configurable option. In the near future, variants of request_firmware will take advantage of this feature. Link: http://lkml.kernel.org/r/20160607164741.31849-3-stephen.boyd@linaro.org [stephen.boyd@linaro.org: Drop firmware_desc design and use flags] Signed-off-by: NVikram Mulukutla <markivx@codeaurora.org> Signed-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This design creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. This patch sets adds support to the request firmware API to load the firmware directly into a pre-allocated buffer, skipping the intermediate copying step and alleviating memory pressure during firmware loading. The drawback is that we can't use the firmware caching feature because the memory for the firmware cache is not managed by the firmware layer. This patch (of 3): We use similar structured code to read and write the kmapped firmware pages. The only difference is read copies from the kmap region and write copies to it. Consolidate this into one function to reduce duplication. Link: http://lkml.kernel.org/r/20160607164741.31849-2-stephen.boyd@linaro.orgSigned-off-by: NStephen Boyd <stephen.boyd@linaro.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-