- 05 8月, 2011 4 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
with CONFIG_XEN and CONFIG_FTRACE set we get this: arch/x86/xen/trace.c:22: error: ‘__HYPERVISOR_console_io’ undeclared here (not in a function) arch/x86/xen/trace.c:22: error: array index in initializer not of integer type arch/x86/xen/trace.c:22: error: (near initialization for ‘xen_hypercall_names’) arch/x86/xen/trace.c:23: error: ‘__HYPERVISOR_physdev_op_compat’ undeclared here (not in a function) Issue was that the definitions of __HYPERVISOR were not pulled if CONFIG_XEN_PRIVILEGED_GUEST was not set. Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Igor Mammedov 提交于
WARN message should not complain "Failed to release memory %lx-%lx err=%d\n" ^^^^^^^ about range when it fails to release just one page, instead it should say what pfn is not freed. In addition line: printk(KERN_INFO "xen_release_chunk: looking at area pfn %lx-%lx: " ... printk(KERN_CONT "%lu pages freed\n", len); will be broken if WARN in between this line is fired. So fix it by using a single printk for this. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Igor Mammedov 提交于
Use correct format specifier for unsigned long. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jeremy Fitzhardinge 提交于
Apparently we wanted CONFIG_FTRACE rather the CONFIG_FUNCTION_TRACER. Reported-by: NSander Eikelenboom <linux@eikelenboom.it> Tested-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 04 8月, 2011 4 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Without enabling CONFIG_XEN_TMEM we get this: drivers/xen/xen-selfballoon.c:461: undefined reference to `tmem_enabled' Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
With a specific enough .config file compile errors show for missing workqueue declarations. Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
drivers/xen/grant-table.c:85: warning: ‘rc’ may be used uninitialized in this function Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in drivers/xen/xen-pciback/xenbus.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 30 7月, 2011 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/tracing: fix compile errors when tracing is disabled.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc由 Linus Torvalds 提交于
* 'at91/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: at91: add arch specific ioremap support at91: factorize sram init at91: move register clocks to soc generic init at91: move clock subsystem init to soc generic init at91: use structure to store the current soc at91: remove AT91_DBGU offset from dbgu register macro at91: factorize at91 interrupts init to soc at91: introduce commom AT91_BASE_SYS
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc由 Linus Torvalds 提交于
* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits) arm/dt: tegra devicetree support arm/versatile: Add device tree support dt/irq: add irq_domain_generate_simple() helper irq: add irq_domain translation infrastructure dmaengine: imx-sdma: add device tree probe support dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name dmaengine: imx-sdma: use platform_device_id to identify sdma version mmc: sdhci-esdhc-imx: add device tree probe support mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() mmc: sdhci-esdhc-imx: do not reference platform data after probe mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 net/fec: add device tree probe support net: ibm_newemac: convert it to use of_get_phy_mode dt/net: add helper function of_get_phy_mode net/fec: gasket needs to be enabled for some i.mx serial/imx: add device tree probe support serial/imx: get rid of the uses of cpu_is_mx1() arm/dt: Add dtb make rule arm/dt: Add skeleton dtsi file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: zynq: remove incorrectly deleted file ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits) watchdog: WatchDog Timer Driver Core - Add minimum and max timeout watchdog: WatchDog Timer Driver Core - Add ioctl call watchdog: WatchDog Timer Driver Core - Add nowayout feature watchdog: WatchDog Timer Driver Core - Add Magic Close feature watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality watchdog: WatchDog Timer Driver Core - Add basic framework watchdog: hpwdt: add next gen HP servers watchdog: it8712f_wdt.c: improve includes watchdog: at91sam9/wdt: move register header to drivers watchdog: Add Xilinx watchdog timer driver watchdog: remove empty pm-functions watchdog: sp805: Flush posted writes in enable/disable. watchdog: sp805: Don't write 0 to the load value register. watchdog: imx2_wdt: add device tree probe support watchdog: s3c2410: Add support for device tree based probe watchdog: mpcore_wdt: Add suspend/resume support. watchdog: mtx1-wdt: use dev_{err,info} instead of printk() ...
-
由 Linus Torvalds 提交于
When commit 4e34e719 ("fs: take the ACL checks to common code") changed the xyz_check_acl() functions into the more natural xyz_get_acl() interface, we grew two copies of the #define ext2_get_acl NULL define for the non-acl case. Remove the extra one. Reported-by: NMarco Stornelli <marco.stornelli@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 7月, 2011 1 次提交
-
-
由 Arnd Bergmann 提交于
My previous commit left the file empty and present in the Makefile, which is a bit dirty and caused problems with 'make distclean', as pointed out by David Howells. This hopefully cleans it up the right way. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJohn Linn <john.linn@xilinx.com>
-
- 28 7月, 2011 25 次提交
-
-
由 Arnd Bergmann 提交于
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
to make the soc base specified at runtime instead of compiled time Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
they are the same except the default priority Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: n2_crypto: Attach on Niagara-T3. n2rng: Attach on Niagara-T3. sparc: Detect and handle UltraSPARC-T3 cpu types. sparc: Don't do expensive hypervisor PCR write unless necessary. sparc: Add T3 sun4v cpu type and hypervisor group defines. sparc: Don't leave sparc_pmu_type NULL on sun4v.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6 gro: Only reset frag0 when skb can be pulled ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (75 commits) md/raid10: handle further errors during fix_read_error better. md/raid10: Handle read errors during recovery better. md/raid10: simplify read error handling during recovery. md/raid10: record bad blocks due to write errors during resync/recovery. md/raid10: attempt to fix read errors during resync/check md/raid10: Handle write errors by updating badblock log. md/raid10: clear bad-block record when write succeeds. md/raid10: avoid writing to known bad blocks on known bad drives. md/raid10 record bad blocks as needed during recovery. md/raid10: avoid reading known bad blocks during resync/recovery. md/raid10 - avoid reading from known bad blocks - part 3 md/raid10: avoid reading from known bad blocks - part 2 md/raid10: avoid reading from known bad blocks - part 1 md/raid10: Split handle_read_error out from raid10d. md/raid10: simplify/reindent some loops. md/raid5: Clear bad blocks on successful write. md/raid5. Don't write to known bad block on doubtful devices. md/raid5: write errors should be recorded as bad blocks if possible. md/raid5: use bad-block log to improve handling of uncorrectable read errors. md/raid5: avoid reading from known bad blocks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
-
由 David S. Miller 提交于
A small modification was necessary since in the machine description for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property. That's OK because this property was always nothing more than an array of integers '1' ... 'nr_inos + 1' so we can just compute it in-place. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And stop referring to Victoria Falls, as the attribute we're talking about is whether the rng is multi-unit capable which applies to several chip variants now. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wim Van Sebroeck 提交于
Add min_timeout (minimum timeout) and max_timeout values so that the framework can check if the new timeout value is between the minimum and maximum timeout values. If both values are 0, then the framework will leave the check for the watchdog device driver itself. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
Add support for extra ioctl calls by adding a ioctl watchdog operation. This operation will be called before we do our own handling of ioctl commands. This way we can override the internal ioctl command handling and we can also add extra ioctl commands. The ioctl watchdog operation should return the appropriate error codes or -ENOIOCTLCMD if the ioctl command should be handled through the internal ioctl handling of the framework. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
Add support for the nowayout feature to the WatchDog Timer Driver Core framework. This feature prevents the watchdog timer from being stopped. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
Add support for the Magic Close feature to the WatchDog Timer Driver Core framework. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
This part add's the WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl functionality to the WatchDog Timer Driver Core framework. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
This part add's the WDIOC_SETOPTIONS ioctl functionality to the WatchDog Timer Driver Core framework. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
This part add's the WDIOC_KEEPALIVE ioctl functionality to the WatchDog Timer Driver Core framework. Please note that the WDIOF_KEEPALIVEPING bit has to be set in the watchdog_info options field. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
This part add's the basic ioctl functionality to the WatchDog Timer Driver Core framework. The supported ioctl call's are: WDIOC_GETSUPPORT WDIOC_GETSTATUS WDIOC_GETBOOTSTATUS Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Wim Van Sebroeck 提交于
The WatchDog Timer Driver Core is a framework that contains the common code for all watchdog-driver's. It also introduces a watchdog device structure and the operations that go with it. This is the introduction of this framework. This part supports the minimal watchdog userspace API (or with other words: the functionality to use /dev/watchdog's open, release and write functionality as defined in the simplest watchdog API). Extra functionality will follow in the next set of patches. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Thomas Mingarelli 提交于
This patch is required to enable hpwdt to work on next generation HP servers with iLO. Signed-off-by: NThomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-