As the comments indicates in blkdev.h, we can fold it into ->end_io_data
usage as that is really what ->waiting is. Fixup the users of
blk_end_sync_rq().
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.
Signed-off-by: NJens Axboe <axboe@suse.de>

Delay the call to adapter->client_register() until after we are
certain that the client registration is a success. At this point the
client is fully initialized and we no longer hold the adapter->clist
mutex, so this should prevent the deadlocks if the client_register()
callback needs to take that mutex too, as is the case for the bttv
driver.

This fixes bug #7234.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

MSI is defined to be 32-bit write.  The 5706 does 64-bit MSI writes
with byte enables disabled on the unused 32-bit word.  This is legal
but causes problems on the AMD 8132 which will eventually stop
responding after a while.

Without this patch, the MSI test done by the driver during open will
pass, but MSI will eventually stop working after a few MSIs are
written by the device.

AMD believes this incompatibility is unique to the 5706, and
prefers to locally disable MSI rather than globally disabling it
using pci_msi_quirk.

Update version to 1.4.45.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix undefined reference in i2c_sibyte_exit().

   drivers/built-in.o: In function `i2c_sibyte_exit':
   i2c-sibyte.c:(.exit.text+0x368): undefined reference to `i2c_del_bus'
   i2c-sibyte.c:(.exit.text+0x368): relocation truncated to fit: R_MIPS_26 against `i2c_del_bus'
   i2c-sibyte.c:(.exit.text+0x38c): undefined reference to `i2c_del_bus'
   i2c-sibyte.c:(.exit.text+0x38c): relocation truncated to fit: R_MIPS_26 against `i2c_del_bus'
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If you send a priority character (as is done for flow control) then the tty
driver can either have its own method for "jumping the queue" or the characrer
can be queued normally.  In the latter case we call the write method but
without the atomic_write_lock taken elsewhere.

Make this consistent.  Note that the send_xchar method if implemented remains
outside of the lock as it can jump ahead of a current write so must not be
locked out by it.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] istallion: Remove private baud rate decoding, which is also broken in this case on some platforms
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The driver has no business doing this work itself any more and hasn't for some
years.  When the new speed stuff goes in this will break entirely so fix it up
ready.

Also remove a #if 0 around a comment....
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the chip detected "oscillator stop" condition, show an warning message.
And initialize it with the Epoch time instead of leaving it with unknown
date/time.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For len equal to 4, we never call sppp_lcp_conf_parse_options(),
therefore rmagic does not get initialized.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Acked-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch limits the messages when ldisc open faulures happen.  It happens
under memory pressure.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This change corrects the logic on the preprocessor conditionals that
include support for ISA port i/o (/dev/ioports) into the mem character
driver.

This fixes the following error when building for powerpc platforms with
CONFIG_PCI=n.

  drivers/built-in.o: undefined reference to `pci_io_base'
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Acked-by: NLinas Vepstas <lins@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Forward port of the patch by Solar and ported by Julio.

Compiles, boots, and passes my looptorturetest.sh.
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Julio Auto <mindvortex@gmail.com>
Cc: Solar Designer <solar@openwall.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix simple typo in RTC_HCTOSYS option.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the disable_irq_nosync_lockdep_irqsave() and
enable_irq_lockdep_irqrestore() APIs.  These are needed for NE2000; basically
NE2000 calls disable_irq and enable_irq as locking against the IRQ handler,
but both in cases where interrupts are on and off.  This means that lockdep
needs to track the old state of the virtual irq flags on disable_irq, and
restore these at enable_irq time.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If your driver implements "break on" and "break off" this ensures you won't
get multiple overlapping requests or requests in parallel.  If your driver
has its own break handling then its still your problem as the driver
author.

Break is also now serialized against writes from user space properly but no
new guarantees are made driver level about writes from the line discipline
itself (eg flow control or echo)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[akpm@osdl.org: build fix]
[akpm@osdl.org: warning fix]
Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently this module just returns 1 if anything on module init fails. Store
the error code of the different function calls and return their error on
problems.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
[ Fixed to not unregister twice on error ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[akpm@osdl.org: fix]
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now we lock the set ioctl its trivial to lock the get one so the data
copied is consistent.  At the moment we have the BKL here but this removes
the need for it and is a step in the right direction
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Memory leaks can happen in the vc_resize() function in drivers/char/vt.c
because of the vc->vc_screenbuf variable overriding in vc_allocate().  The
kmemleak reported trace is as follows:

  <__kmalloc>
  <vc_resize>
  <fbcon_init>
  <visual_init>
  <vc_allocate>
  <con_open>
  <tty_open>
  <chrdev_open>

This patch no longer allocates a screen buffer in vc_allocate() if it was
already allocated by vc_resize().
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the Kconfig entry for console on AMBA PL011 to match the code.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This can now be removed, since there is now a drivers/rtc/rtc-s3c.c driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove some code which is unneeded if CONFIG_PM=n.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Support SB600 SATA legacy IDE (DMA enable).
Signed-off-by: NAnatoli Antonovitch <antonovi@ati.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280).  It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().

Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.

Eric's original description:

	There are a lot of places in the kernel where we test for init
	because we give it special properties.  Most  significantly init
	must not die.  This results in code all over the kernel test
	->pid == 1.

	Introduce is_init to capture this case.

	With multiple pid spaces for all of the cases affected we are
	looking for only the first process on the system, not some other
	process that has pid == 1.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: <lxc-devel@lists.sourceforge.net>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current kernel serializes console resizes but does not serialize the
resize against the tty structure updates.  This means that while two
parallel resizes cannot mess up the console you can get incorrect results
reported.

Secondly while doing this I added vc_lock_resize() to lock and resize the
console.  This leaves all knowledge of the console_sem in the vt/console
driver and kicks it out of the tty layer, which is good

Thirdly while doing this I decided I couldn't stand "disallocate" any
longer so I switched it to "deallocate".
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix utf-8 mode so alternate charset modes always work according to control
sequences interpreted in do_con_trol function preserving backward US-ASCII
and VT100 semigraphics compatibility.

Malformed utf-8 sequences are represented as sequences of replacement
glyphs,original codes or '?' as a last resort.

unicode-xterm, gnome-terminal, kconsole and other terminal emulators in
utf-8 mode respect acsc, enacs, rmacs sequences.  Also I found that some
important system programs (from Debian distro) uses acsc in utf-8 mode -
dselect, aptitude, w3m for example.
Signed-off-by: NAdam Tlalka <atlka@pg.gda.pl>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ucb1x00-ts: handle errors from input_register_device()
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Just comment and next "while" look _very_ wrong.  Place { correctly to hint
unsuspecting ones that it's the end of the loop actually.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As suggested by Muli Ben-Yehuda this function is moved to generic code as
may be useful for all archs.

[akpm@osdl.org: fix]
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jon Smirl noted a couple of tty driver functions now are quite misleadingly
named with the death of devfs.  A quick grep found another case in the lp
driver.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Previously, since determination whether there was an Intel random number
generator was based on a single bit, on systems with a matching bridge
device but without a firmware hub, there was a 50% chance that the code
would incorrectly decide that the system had an RNG.  This patch adds
detection of the firmware hub to better qualify the existence of an RNG.

There is one issue with the patch: I was unable to determine the LPC
equivalent for the PCI bridge 8086:2430 (since the old code didn't care
about which of the many devices provided by the ICH/ESB it was chose to use
the PCI bridge device, but the FWH settings live in the LPC device, so the
device list needed to be changed).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This teaches dmi_decode() how to decode and save OEM Strings (type 11) DMI
information, which is currently discarded silently.  Existing code using
DMI is not affected.  Follows the "System Management BIOS (SMBIOS)
Specification" (http://www.dmtf.org/standards/smbios), and also the
userspace dmidecode.c code.

OEM Strings are the only safe way to identify some hardware, e.g., the
ThinkPad embedded controller used by the soon-to-be-submitted tp_smapi
driver.  This will also let us eliminate the long whitelist in the mainline
hdaps driver (in a future patch).
Signed-off-by: NShem Multinymous <multinymous@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace kernel_thread() call in drivers/base/firmware_class.c with
kthread_create() since kernel_thread() is deprecated in drivers.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Manuel Estrada Sainz <ranty@debian.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for keypad driver running on different TI
OMAP(http://www.ti.com/omap) processor based boards like OSK, H2, H3, H4,
Persuas and Nokia 770.
Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>