- 07 12月, 2006 40 次提交
-
-
由 Muli Ben-Yehuda 提交于
This patch makes it possible to compile Calgary in but not use it by default. In this mode, use 'iommu=calgary' to activate it. Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Muli Ben-Yehuda 提交于
This patch cleans up the previous "Use BIOS supplied BBAR information" patch. Mostly stylistic clenaups, but also check for ioremap failure when we ioremap the BBAR rather than when trying to use it. Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NLaurent Vivier <Laurent.Vivier@bull.net>
-
由 Laurent Vivier 提交于
Find the BBAR register address of each Calgary using the "Extended BIOS Data Area" rather than calculating it ourselves. Also get the bus topology (what PHB each bus is on) from Calgary rather than calculating it ourselves. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=7407. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Muli Ben-Yehuda 提交于
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 bibo,mao 提交于
This patch moves e820 memory map print and memmap boot param parsing function from setup.c to e820.c, also adds limit_regions and print_memory_map declaration in header file. Signed-off-by: Nbibo,mao <bibo.mao@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 152 +++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 158 --------------------------------- include/asm-i386/e820.h | 2 arch/i386/kernel/e820.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 153 ----------------------------------------------- include/asm-i386/e820.h | 2 3 files changed, 155 insertions(+), 152 deletions(-)
-
由 bibo,mao 提交于
This patch moves e820/efi memmap table walking function from setup.c to e820.c, also this patch adds extern declaration in header file. Signed-off-by: Nbibo,mao <bibo.mao@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 115 +++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 118 ----------------------------------- include/asm-i386/e820.h | 2 arch/i386/kernel/e820.c | 115 +++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 118 ----------------------------------------------- include/asm-i386/e820.h | 2 3 files changed, 117 insertions(+), 118 deletions(-)
-
由 bibo,mao 提交于
Move more code from setup.c into e820.c Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 bibo,mao 提交于
This patch moves bios e820 map sanitize and copy function from setup.c to e820.c Signed-off-by: Nbibo,mao <bibo.mao@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> arch/i386/kernel/e820.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 240 -------------------------------------------- 2 files changed, 252 insertions(+), 240 deletions(-)
-
由 bibo,mao 提交于
This patch creates new file named e820.c to hanle standard io/mem resources, moving request_standard_resources function from setup.c to e820.c. Also this patch modifies Makfile to compile file e820.c. Signed-off-by: Nbibo,mao <bibo.mao@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Makefile | 2 arch/i386/kernel/Makefile | 2 arch/i386/kernel/e820.c | 289 ++++++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/setup.c | 276 ------------------------------------------- 3 files changed, 293 insertions(+), 274 deletions(-)
-
由 Albert Cahalan 提交于
The recent change to make x86_64 support i386 binaries compiled with -mregparm=3 only covered signal handlers without SA_SIGINFO. (the 3-arg "real-time" ones) To be compatible with i386, both types should be supported. Signed-off-by: NAlbert Cahalan <acahalan@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Instead of adding all kinds of more quirks try various timer routing variants in check_timer. In particular this tries to handle quirks from: - Nvidia NF2-4 reference BIOS: wrong timer override - Asus: Wrong timer override but no HPET table - ATI: require timer disabled in 8259 - Some boards: require timer enabled in 8259 We just try many of the the known variants in the hopefully right order in check_timer. Trying pin 0/2 on Nvidia suggested by Tim Hockin. TBD Experimental. Needs a lot of testing Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Makes the intention of the code cleaner to read and avoids a potential deadlock on mmap_sem. Also change the types of the arguments to not include __user because they're really not user addresses. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Instead of open coded __get_user Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Caller of probe_kernel_address shouldn't need to know that pka is internally implemented with __get_user. So move the __user cast into pka. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Yinghai Lu 提交于
Clear the irq releated entries in irq_vector, irq_domain and vector_irq instead of clearing irq_vector only. So when new irq is created, it could reuse that vector. (actually is the second loop scanning from FIRST_DEVICE_VECTOR+8). This could avoid the vectors are used up with enough module inserting and removing Cc: Eric W. Biedierman <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-By: NYinghai Lu <yinghai.lu@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
CLFLUSH is a lot faster than WBINVD so try to use that. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Also report it in /proc/cpuinfo similar to x86-64. Needed for followon patch Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
CLFLUSH is a lot faster than WBINVD so avoid the later if at all possible. Always pass the complete list of pages to other CPUs to cut down the number of IPIs. Minor other cleanup and sync with i386 version. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Joe Korty 提交于
The entry.S code at work_notifysig is surely wrong. It drops into unrelated code if the branch to work_notifysig_v86 is taken, and CONFIG_VM86=n. [PATCH] Make vm86 support optional tree 9b5daef5280800a0006343a17f63072658d91a1d pushed to git Jan 8, 2006, and first appears in 2.6.16 The 'fix' here is to also compile out the vm86 test & branch when CONFIG_VM86=n. Signed-off-by: NJoe Korty <joe.korty@ccur.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Avi Kivity 提交于
Code that wants to use struct desc_struct cannot do so on i386 because desc.h contains other code that will only compile on x86_64. So extract the structure definitions into a asm-x86_64/desc_defs.h. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndi Kleen <ak@suse.de> include/asm-x86_64/desc.h | 53 ------------------------------- include/asm-x86_64/desc_defs.h | 69 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+), 52 deletions(-)
-
由 Vivek Goyal 提交于
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Extend bzImage protocol to enable bootloaders to load a completely relocatable bzImage. Now protected mode component of kernel is also relocatable and a boot-loader can load the protected mode component at a differnt physical address than 1MB. (If kernel was built with CONFIG_RELOCATABLE) Kexec can make use of it to load this kernel at a different physical address to capture kernel crash dumps. Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Vivek Goyal 提交于
o Now CONFIG_PHYSICAL_START is being replaced with CONFIG_PHYSICAL_ALIGN. Hardcoding the kernel physical start value creates a problem in relocatable kernel context due to boot loader limitations. For ex, if somebody compiles a relocatable kernel to be run from address 4MB, but this kernel will run from location 1MB as grub loads the kernel at physical address 1MB. Kernel thinks that I am a relocatable kernel and I should run from the address I have been loaded at. So somebody wanting to run kernel from 4MB alignment location (for improved performance regions) can't do that. o Hence, Eric proposed that probably CONFIG_PHYSICAL_ALIGN will make more sense in relocatable kernel context. At run time kernel will move itself to a physical addr location which meets user specified alignment restrictions. Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
o Relocations generated w.r.t absolute symbols are not processed as by definition, absolute symbols are not to be relocated. Explicitly warn user about absolutions relocations present at compile time. o These relocations get introduced either due to linker optimizations or some programming oversights. o Also create a list of symbols which have been audited to be safe and don't emit warnings for these. Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Eric W. Biederman 提交于
This patch modifies the i386 kernel so that if CONFIG_RELOCATABLE is selected it will be able to be loaded at any 4K aligned address below 1G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel relocations are generated. Resulting in a kernel that is relocatable with no runtime overhead and no need to modify the source code. A reserved 32bit word in the parameters has been assigned to serve as a stack so we figure out where are running. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Eric W. Biederman 提交于
Print the addresses of non-absolute symbols relative to _text so that ld will generate relocations. Allowing a relocatable kernel to relocate them. We can't actually use the symbol names because kallsyms includes static symbols that are not exported from their object files. Add the _text symbol definitions to the architectures which don't define it otherwise linker will fail. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Eric W. Biederman 提交于
Defining __PHYSICAL_START and __KERNEL_START in asm-i386/page.h works but it triggers a full kernel rebuild for the silliest of reasons. This modifies the users to directly use CONFIG_PHYSICAL_START and linux/config.h which prevents the full rebuild problem, which makes the code much more maintainer and hopefully user friendly. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Eric W. Biederman 提交于
Currently when we are reserving the memory the kernel text resides in we start at __PHYSICAL_START which happens to be correct but not very obvious. In addition when we start relocating the kernel __PHYSICAL_START is the wrong value, as it is an absolute symbol that does not get relocated. By starting the reservation at __pa_symbol(_text) the code is clearer and will be correct when relocated. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Eric W. Biederman 提交于
On x86_64 we have to be careful with calculating the physical address of kernel symbols. Both because of compiler odditities and because the symbols live in a different range of the virtual address space. Having a defintition of __pa_symbol that works on both x86_64 and i386 simplifies writing code that works for both x86_64 and i386 that has these kinds of dependencies. So this patch adds the trivial i386 __pa_symbol definition. Added assembly magic similar to RELOC_HIDE as suggested by Andi Kleen. Just picked it up from x86_64. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Ld knows about 2 kinds of symbols, absolute and section relative. Section relative symbols symbols change value when a section is moved and absolute symbols do not. Currently in the linker script we have several labels marking the beginning and ending of sections that are outside of sections, making them absolute symbols. Having a mixture of absolute and section relative symbols refereing to the same data is currently harmless but it is confusing. This must be done carefully as newer revs of ld do not place symbols that appear in sections without data and instead ld makes those symbols global :( My ultimate goal is to build a relocatable kernel. The safest and least intrusive technique is to generate relocation entries so the kernel can be relocated at load time. The only penalty would be an increase in the size of the kernel binary. The problem is that if absolute and relocatable symbols are not properly specified absolute symbols will be relocated or section relative symbols won't be, which is fatal. The practical motivation is that when generating kernels that will run from a reserved area for analyzing what caused a kernel panic, it is simpler if you don't need to hard code the physical memory location they will run at, especially for the distributions. [AK: and merged:] o Also put a message so that in future people can be aware of it and avoid introducing absolute symbols. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
This network ioctl wasn't handled before. Reported by Alexandra.Kossovsky@oktetlabs.ru (Alexandra Kossovsky) Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
On modern systems RAM errors don't cause NMIs, but it's usually caused by PCI SERR. Mention PCI instead of RAM in the printk. Reported by r_hayashi@ctc-g.co.jp (Ryutaro Hayashi) Cc: r_hayashi@ctc-g.co.jp Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Alan Cox 提交于
Resending as I believe the discussion about them established they were correct. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Andi Kleen 提交于
Currently the idle loop has two nested loops -- one high level in cpu_idle and in some low level idle functions another one. Looping in the low level idle functions breaks the idle notifiers because interrupts waking up sleep states need to execute exit_idle() which is only in cpu_idle(). So don't do that, only loop in cpu_idle(). This only removes code. In some cases e.g. poll_idle the idle loop is a little longer now because cpu_idle checks more things. I hope that isn't a problem ACPI idle doesn't change behaviour because it never looped anyways. Cc: len.brown@intel.com Cc: eranian@hpl.hp.com Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
This patch fixes the math emulator, which had not been adjusted to match the changed struct pt_regs. AK: extracted from larger patch by Jeremy. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
Use the pcurrent field in the PDA to implement the "current" macro. This ends up compiling down to a single instruction to get the current task. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
Use the cpu_number in the PDA to implement raw_smp_processor_id. This is a little simpler than using thread_info, though the cpu field in thread_info cannot be removed since it is used for things other than getting the current CPU in common code. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
sys_vm86 uses a struct kernel_vm86_regs, which is identical to pt_regs, but adds an extra space for all the segment registers. Previously this structure was completely independent, so changes in pt_regs had to be reflected in kernel_vm86_regs. This changes just embeds pt_regs in kernel_vm86_regs, and makes the appropriate changes to vm86.c to deal with the new naming. Also, since %gs is dealt with differently in the kernel, this change adjusts vm86.c to reflect this. While making these changes, I also cleaned up some frankly bizarre code which was added when auditing was added to sys_vm86. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-