- 01 3月, 2016 1 次提交
-
-
由 Ben Hutchings 提交于
GRO is simpler to use than the old inet_lro library, and is compatible with forwarding and bridging configurations. Compile-tested only. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 29 10月, 2015 1 次提交
-
-
由 Sagi Grimberg 提交于
No ULP uses it anymore, go ahead and remove it. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 31 1月, 2012 1 次提交
-
-
由 Tatyana Nikolova 提交于
Update copyright information in the source files. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NFaisal Latif <Faisal.Latif@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 11 10月, 2011 1 次提交
-
-
由 Faisal Latif 提交于
Support for Packed and Unaligned (PAU) FPDUs is needed for interoperability between NES and non-NES nodes. When the NES hardware detects a PAU frame, it will pass it to the driver to process the frame. NES driver creates a new frame for each FPDU and forwards it to the hardware to be sent to its associated qp. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NFaisal Latif <Faisal.Latif@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 7月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill nesvnic->vlan_grp and nes_netdev_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2011 2 次提交
-
-
由 Maciej Sosnowski 提交于
In case of SFP+ PHY, link status check at interrupt processing can give false results. For proper link status change detection a delayed recheck is needed to give nes registers time to settle. Add a periodic link status recheck scheduled at interrupt to detect potential delayed registers state changes. Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Maciej Sosnowski 提交于
Depending on link state change, IB_EVENT_PORT_ERR or IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts. Plugging in a cable happens to result in series of interrupts changing driver's link state a number of times before finally staying at link up (e.g. link up, link down, link up, link down, ..., link up). To prevent sending series of redundant IB_EVENT_PORT_ACTIVE and IB_EVENT_PORT_ERR events, we use a timer to debounce them in nes_port_ibevent(). Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 09 9月, 2010 1 次提交
-
-
由 Faisal Latif 提交于
Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by: NFaisal Latif <faisal.latif@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 7月, 2010 1 次提交
-
-
由 Chien Tung 提交于
Read and print eeprom version and save it off for later use. Also delete a tab. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 12 3月, 2010 1 次提交
-
-
由 Chien Tung 提交于
Clear the stall bit to drop any incoming packets while destroying NIC QP. This will prevent a chip resource leak. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 26 2月, 2010 1 次提交
-
-
由 Chien Tung 提交于
Add support for KR device id 0x0110. While at it, cleanup nes_init_phy() by splitting it into nes_init_1g_phy() and nes_init_2025_phy(). Remove support for NES_PHY_TYPE_IRIS, which was used on an XFP board that was only manufactured in small quantities and given out for evals in even smaller quantities. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 10 12月, 2009 2 次提交
-
-
由 Chien Tung 提交于
Update copyright from Intel-NE, Inc. to Intel Corporation. Use proper branding string in Kconfig and simplify description. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Chien Tung 提交于
Replace alloc_fmr, unmap_fmr, dealloc_fmr and map_phys_fmr with alloc_fast_reg_mr, alloc_fast_reg_page_list, free_fast_reg_page_list. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 06 9月, 2009 2 次提交
-
-
由 Don Wood 提交于
When an asynchronous event occurs that requires a terminate, it is sometimes possible to identify the wqe in error. This change uses flush to get this information to the poll routine. The flush operation puts the status into the cqe. If this information is not available, it continues to use the more generic flush code as before. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
Implement the sending and receiving of Terminate packets. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 09 4月, 2009 2 次提交
-
-
由 Chien Tung 提交于
Add new register settings for new SFP+ PHY/firmware. Add new PHY to to nes_netdev_get/set_settings. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Chien Tung 提交于
We have observed unstable link with a new BNT switch. Add wide_ppm_offset parameter to allow the user to control the clock ppm offset on the CX4 interface for better compatibility. Default is 100ppm, setting it to 1 will increase it to 300ppm. Change default SerDes1 reference clock to external source. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 07 3月, 2009 3 次提交
-
-
由 Faisal Latif 提交于
NETIF_F_LLTX is deprecated. Remove private TX locking from the driver and remove the NETIF_F_LLTX feature flag. This also fixes a warning in some configs that comes from doing skb_linearize() call in the hard_start_xmit method with IRQs disabled (if HIGHMEM is enabled, skb_linearize() may end up enabling BHs, which is a no-no if hard IRQs are disabled in that context). By getting rid of LLTX, we do not disable IRQs when skb_linearize() is called. Remove the sq_lock as it is not needed for non-LLTX. Fix ethtool not to show the counter for sq_lock. Reported-by: aluno3@poczta.onet.pl Signed-off-by: NFaisal Latif <faisal.latif@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
When asynchronous events are processed by software, it is necessary to let the hardware know that software has handled the event. This frees up the entry in the asynchronous event queue. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Chien Tung 提交于
Update copyright to the new legal entity, Intel-NE, Inc., an Intel company. Update copyright for the new year. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 03 11月, 2008 1 次提交
-
-
由 Chien Tung 提交于
Under heavy load, there is an compatibility issue regarding PCIe write credits with certain chipsets. It can be mitigated by limiting read requests to 256 Bytes. This workaround is always enabled for Tbird2 on Gladius. We also add a module parameter to enable workaround for non-Gladius cards. Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 04 10月, 2008 1 次提交
-
-
由 Vadim Makhervaks 提交于
Change management of perfect filter table to allow enhanced performance applications. Signed-off-by: NVadim Makhervaks <vmakhervaks@neteffect.com> Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: NChien Tung <ctung@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 01 10月, 2008 3 次提交
-
-
由 Chien Tung 提交于
Mask off a critical error after 100 critical error interrupts to keep the system "sane". Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: NChien Tung <ctung@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Chien Tung 提交于
Add a module parameter wqm_quanta. It controls the number of segments transmitted at a time. Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: NChien Tung <ctung@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Chien Tung 提交于
Add support for NetEffect 4 port 1G HP blade card. The mapping between physical port and MAC is different from the standup card. Signed-off-by: NChien Tung <ctung@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 15 7月, 2008 1 次提交
-
-
由 Roland Dreier 提交于
Every caller of nes_post_cqp_request() passed it NES_CQP_REQUEST_RING_DOORBELL, so just remove that parameter and always ring the doorbell. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NFaisal Latif <flatif@neteffect.com>
-
- 30 4月, 2008 3 次提交
-
-
由 Glenn Streiff 提交于
Various cleanups: - Change // to /* .. */ - Place whitespace around binary operators. - Trim down a few long lines. - Some minor alignment formatting for better readability. - Remove some silly tabs. Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eric Schneider 提交于
This patch enables the iw_nes module for NetEffect RNICs to support additional PHYs including SFP+ (referred to as ARGUS in the code). Signed-off-by: NEric Schneider <eric.schneider@neteffect.com> Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Faisal Latif 提交于
Signed-off-by: Faisal Latif <flatif@neteffect.com. Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 24 4月, 2008 1 次提交
-
-
由 Roland Dreier 提交于
Remove the volatile qualifier from the cq_vbase member of struct nes_hw_cq, and add an rmb() in the one place where it looks like access order might make a difference. As usual, removing a volatile qualifier in a declaration is actually a bug fix, since a volatile qualifier is not sufficient to make sure that aggressively out-of-order CPUs don't reorder things and cause incorrect results. For example, a CPU might speculatively execute reads of other cqe fields before the NIC hardware has written those fields and before it has set the NES_CQE_VALID bit (even though those reads come after the test of the NES_CQE_VALID bit in program order), but then when the CPU actually executes the conditional test of the NES_CQE_VALID, the bit has been set, and the CPU will proceed with the results of the earlier speculative execution and end up using bogus data. This also gets rid of the warning: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_destroy_cq': drivers/infiniband/hw/nes/nes_verbs.c:1978: warning: passing argument 3 of 'pci_free_consistent' discards qualifiers from pointer target type Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 27 2月, 2008 1 次提交
-
-
由 John Lacombe 提交于
Interrupt moderation low threshold value was incorrectly triggering, indicating that the threshold should be lowered. The impact was the timer was likely to become 40usecs and get stuck there. The biggest side effect was too many interrupts and nonoptimal performance. Signed-off-by: NJohn Lacombe <jlacombe@neteffect.com> Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 05 2月, 2008 1 次提交
-
-
由 Glenn Streiff 提交于
Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters. Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-