Distros are shipping modules we had marked EXPERIMENTAL,
so clearly it has lost some meaning.

Delete that dependency for shipping modules, retaining
it only for ACPI_HOTKEY and ACPI_CONTAINER to emphasize
that they lack testing on real hardware.
Signed-off-by: NLen Brown <len.brown@intel.com>

Build issues were mostly in the ACPI=n case -- don't do that.
Select ACPI from IA64_GENERIC.
Add some missing dependencies on ACPI.

Mark BLACKLIST_YEAR and some laptop-only ACPI drivers
as X86-only.  Let me know when you get an IA64 Laptop.
Signed-off-by: NLen Brown <len.brown@intel.com>

it is a synonym for CONFIG_ACPI
Signed-off-by: NLen Brown <len.brown@intel.com>

it is a synonym for CONFIG_ACPI
Signed-off-by: NLen Brown <len.brown@intel.com>

it has been a synonym for CONFIG_ACPI since 2.6.12
Signed-off-by: NLen Brown <len.brown@intel.com>

Noticed by Coverity checker.

(akpm: I stole this from Greg's tree and used the (IMO) tidier sizeof(*p)
construct).
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We weren't actually waking up the md thread after setting
MD_RECOVERY_NEEDED when assembling an array, so it is possible to lose a
race and not actually start resync.

So add a call to md_wakeup_thread, and while we are at it, remove all the
"if (mddev->thread)" guards as md_wake_thread does its own checking.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_PREEMPT && !CONFIG_SMP, it's possible for sys_getppid to
return a bogus value if the parent's task_struct gets reallocated after
current->group_leader->real_parent is read:

        asmlinkage long sys_getppid(void)
        {
                int pid;
                struct task_struct *me = current;
                struct task_struct *parent;

                parent = me->group_leader->real_parent;
RACE HERE =>    for (;;) {
                        pid = parent->tgid;
        #ifdef CONFIG_SMP
        {
                        struct task_struct *old = parent;

                        /*
                         * Make sure we read the pid before re-reading the
                         * parent pointer:
                         */
                        smp_rmb();
                        parent = me->group_leader->real_parent;
                        if (old != parent)
                                continue;
        }
        #endif
                        break;
                }
                return pid;
        }

If the process gets preempted at the indicated point, the parent process
can go ahead and call exit() and then get wait()'d on to reap its
task_struct. When the preempted process gets resumed, it will not do any
further checks of the parent pointer on !CONFIG_SMP: it will read the
bad pid and return.

So, the same algorithm used when SMP is enabled should be used when
preempt is enabled, which will recheck ->real_parent in this case.
Signed-off-by: NDavid Meybohm <dmeybohmlkml@bellsouth.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Coverity checker.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This trips up a lot of folks reading this code.
Put an unlikely() around the port-exhaustion test
for good measure.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intention of this bit is to force pushing of the existing
send queue when TCP_CORK or TCP_NODELAY state changes via
setsockopt().

But it's easy to create a situation where the bit never
clears.  For example, if the send queue starts empty:

1) set TCP_NODELAY
2) clear TCP_NODELAY
3) set TCP_CORK
4) do small write()

The current code will leave TCP_NAGLE_PUSH set after that
sequence.  Unconditionally clearing the bit when new data
is added via skb_entail() solves the problem.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qdisc_create_dflt() is missing to destroy the newly allocated
default qdisc if the initialization fails resulting in leaks
of all kinds. The only caller in mainline which may trigger
this bug is sch_tbf.c in tbf_create_dflt_qdisc().

Note: qdisc_create_dflt() doesn't fulfill the official locking
      requirements of qdisc_destroy() but since the qdisc could
      never be seen by the outside world this doesn't matter
      and it can stay as-is until the locking of pkt_sched
      is cleaned up.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add SNMP_MIB_SENTINEL to the definition of the sctp_snmp_list so that
the output routine in proc correctly terminates.  This was causing some
problems running on ia64 systems.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 o Brown paperbag bug - ax25_findbyuid() was always returning a NULL pointer
   as the result.  Breaks ROSE completly and AX.25 if UID policy set to deny.

 o While the list structure of AX.25's UID to callsign mapping table was
   properly protected by a spinlock, it's elements were not refcounted
   resulting in a race between removal and usage of an element.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The socket flag cleanups that went into 2.6.12-rc1 are basically oring
the flags of an old socket into the socket just being created.
Unfortunately that one was just initialized by sock_init_data(), so already
has SOCK_ZAPPED set.  As the result zapped sockets are created and all
incoming connection will fail due to this bug which again was carefully
replicated to at least AX.25, NET/ROM or ROSE.

In order to keep the abstraction alive I've introduced sock_copy_flags()
to copy the socket flags from one sockets to another and used that
instead of the bitwise copy thing.  Anyway, the idea here has probably
been to copy all flags, so sock_copy_flags() should be the right thing.
With this the ham radio protocols are usable again, so I hope this will
make it into 2.6.13.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The checksum needs to be filled in on output, after mangling a packet
ip_summed needs to be reset.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com>

Found this bug while doing some scaling testing that created 500K inet
peers.

peer_check_expire() in net/ipv4/inetpeer.c isn't using inet_peer_gc_mintime
correctly and will end up creating an expire timer with less than the
minimum duration, and even zero/negative if enough active peers are
present.

If >65K peers, the timer will be less than inet_peer_gc_mintime, and with
>70K peers, the timer duration will reach zero and go negative.

The timer handler will continue to schedule another zero/negative timer in
a loop until peers can be aged.  This can continue for at least a few
minutes or even longer if the peers remain active due to arriving packets
while the loop is occurring.

Bug is present in both 2.4 and 2.6.  Same patch will apply to both just
fine.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While I was going through the crypto users recently, I noticed this
bogus kmap in sunrpc.  It's totally unnecessary since the crypto
layer will do its own kmap before touching the data.  Besides, the
kmap is throwing the return value away.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the tail SKB fits into the window, it is still
benefitical to defer until the goal percentage of
the window is available.  This give the application
time to feed more data into the send queue and thus
results in larger TSO frames going out.

Patch from Dmitry Yusupov <dima@neterion.com>.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thanks to Stephane, we've now worked out the real cause of the
`Linux  will not boot on simulator' problem.  Turns out it's a stack
overflow because the stack pointer wasn't being initialised properly
in boot_head.S (it was being initialised to the lowest instead of the
highest address of the stack, so the first push started to overwrite
data in the BSS).
Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Earlier fix in 4aec0fb1 just
masked the real problem.
Signed-off-by: NTony Luck <tony.luck@intel.com>

It has all the normal priority inversion problems.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Most importantly, remove bogus BUG() in receive path.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An incorrect check made it bail out before doing anything.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We'd updated the prototype and the return value, but not the function
declaration itself.

Plug a race in TSC synchronization

We need to do tsc_sync_wait() before the CPU is set online to prevent
multiple CPUs from doing it in parallel - which won't work because TSC
sync has global unprotected state.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't printk exceptions for ltrace
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added missing unlock_kernel() to NFSv4 atomic lookup.
Signed-off-by: NSteve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I'm trying to get the nmi working with my laptop (IBM ThinkPad G41) and after
debugging it a while, I found that the nmi code doesn't want to set it up for
this particular CPU.

Here I have:

$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz
stepping        : 1
cpu MHz         : 3320.084
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 3
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni
monitor ds_cpl est tm2 cid xtpr
bogomips        : 6642.39

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz
stepping        : 1
cpu MHz         : 3320.084
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 3
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni
monitor ds_cpl est tm2 cid xtpr
bogomips        : 6637.46

And the following code shows:

$ cat linux-2.6.13-rc6/arch/i386/kernel/nmi.c

[...]

void setup_apic_nmi_watchdog (void)
{
        switch (boot_cpu_data.x86_vendor) {
        case X86_VENDOR_AMD:
                if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
                        return;
                setup_k7_watchdog();
                break;
        case X86_VENDOR_INTEL:
                 switch (boot_cpu_data.x86) {
                case 6:
                        if (boot_cpu_data.x86_model > 0xd)
                                return;

                        setup_p6_watchdog();
                        break;
                case 15:
                        if (boot_cpu_data.x86_model > 0x3)
                                return;

Here I get boot_cpu_data.x86_model == 0x4.  So I decided to change it and
reboot.  I now seem to have a working NMI.  So, unless there's something know
to be bad about this processor and the NMI.  I'm submitting the following
patch.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Acked-by: NMikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes up the symlink functions for the calling convention change:

 * afs, autofs4, befs, devfs, freevxfs, jffs2, jfs, ncpfs, procfs,
   smbfs, sysvfs, ufs, xfs - prototype change for ->follow_link()
 * befs, smbfs, xfs - same for ->put_link()
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This bug could cause oopses and page state corruption, because ncpfs
used the generic page-cache symlink handlign functions.  But those
functions only work if the page cache is guaranteed to be "stable", ie a
page that was installed when the symlink walk was started has to still
be installed in the page cache at the end of the walk.

We could have fixed ncpfs to not use the generic helper routines, but it
is in many ways much cleaner to instead improve on the symlink walking
helper routines so that they don't require that absolute stability.

We do this by allowing "follow_link()" to return a error-pointer as a
cookie, which is fed back to the cleanup "put_link()" routine.  This
also simplifies NFS symlink handling.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current calling conventions for ->follow_link() are already fairly
complex.

What we have is
	1) you can return -error; then you must release nameidata yourself
	   and ->put_link() will _not_ be called.
	2) you can do nd_set_link(nd, ERR_PTR(-error)) and return 0
	3) you can do nd_set_link(nd, path) and return 0
	4) you can return 0 (after having moved nameidata yourself)

jffs2 follow_link() is broken - it has an exit where it returns
-EIO and leaks nameidata.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>