According to customer request, hp should be default to redirected mode,
i.e. PW4 connect select default to to MW0.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

To via_control_templates[].
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As init verbs, vt17xx_volume_init_verb is a better place to hold them.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With snd_hda_override_amp_caps.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rewrite nid_vol/mute assignment for clearity, and check line connection
before adding control for it.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rewrite nid_vol/mute assignment for clearity, and check line connection
before adding control for it.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replaced with via_playback_multi_pcm_prepare/cleanup to support
multi-stream operations
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

like seqassoc 0xff, seqassoc 0xf0 of vt1708 should override Port
Connectivity field into 'AC_JACK_PORT_COMPLEX'
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VT1708 does not support unsolicited response, but we need hp detect to
automute speaker. Implemented in workqueue.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Smart 5.1 is for 3-jacks model, to reuse input pins as outputs.
While off, they act as "line out" / "line in" / "mic in".
While on, they acts as "line out" / "back left/right" / "center/lfe".
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use hp_independent_mode_index to store hp index, and simplify function
via_independent_hp_put with it.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For VT1708S and VT1702, deactivate "Headphone Playback Volume" and
"Headphone Playback Mute" control if "Independent HP" mode is OFF.
and rename VT1702 "Independent HP" text.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For VT1708B, VT1708S and VT1702, enter low current mode if no analog
stream is opened and all aa path mute.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enter low power state if AA-Path volume is muted.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

according to customer request, VT1702 AA-Path max volume (12 dB) is too
high, so limit to 0 dB.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

IS_VT17*_VENDORID macros are used nowhere, so clean them up.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow Nvidia HDMI to support more possible sample rates and formats.
At best, the really supported rates and formats should be determined
together with the negotiation with the HDMI receiver, but it's currently
not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3
standard in this regard).  As a compromise, we enable all bits, assuming
that all recent devices do support such rates/formats.
Tested-by: NAlan Alan <alanwww1@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w
design different from other siblings), it needs to call fixup_automic_adc()
explicitly to set up the auto-mic routing.  Otherwise the indices for
int/ext mics aren't set properly.

Reference: Novell bnc#544899
	http://bugzilla.novell.com/show_bug.cgi?id=544899Signed-off-by: NTakashi Iwai <tiwai@suse.de>

alc_subsystem_id() tries to pick up a headphone pin if not configured,
but this caused side-effects as the problem in commit
15870f05.

This patch fixes the driver behavior to pick up invalid HP pins; at least,
the pins that are listed as the primary outputs aren't taken any more.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS A7K needs additional GPIO1 bit setup; it has to be cleared.
Added a new fixup hook for this laptop so that it works as is.

Refernece: Novell bnc#494309
	http://bugzilla.novell.com/show_bug.cgi?id=494309Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent auto-parser doesn't work for machines with a single output
with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
the hp_pins[0] while it's listed in line_outs[0].
This ends up with the doubled initialization of the same mixer widget,
and it mutes the DAC route because hp_pins has no DAC assigned.

To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
so that they are really detected pins.

Reference: Novell bnc#544161
	http://bugzilla.novell.com/show_bug.cgi?id=544161Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use a common helper to create playback controls.
This gives less chance of typos.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The auto-parser for ALC662/663/272 codecs doesn't work properly when
a speaker is connected to mono NID 0x17, and doesn't handle the dynamic
DAC assignment properly.

This patch fixes the issues and also improves the assignment of DACs
so that HP and speakers can have independent volume controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the auto-mic switching between an analog and a digital mic is
needed with IDT codecs, the current driver doesn't reset the connection
of the digital mux.

This patch fixes the behavior by checking both mux connections properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Patch was tested on Toshiba NB200 and is found to enable sound.
Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit fdbc6626, I mistakenly
replaced the capture mixer array for ALC268_ACER to nosrc version
although this should be kept to alt_mixer.  Now fixed back.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reference: ALSA bug #0004614
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614

port-A (0x11)      - front hp-out
port-D (0x12)      - rear line out
port-E (0x1c)      - front mic-in
port-F (0x16)      - Internal speakers
digital-mic (0x17) - Internal mic

init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware
Signed-off-by: NMiguel de Barros <miguel.de.barros@bluewin.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>