The ath79 platform code allows to run a single kernel image on various
SoCs which are based on the 24Kc and 74Kc cores.  The current code
explicitely disables the DSP ASE, but that is available in the 74Kc core.

Remove the override in order to let the kernel to detect the availability
of the DSP ASE at runtime.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4222/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current implementation of synchronise_count_{master,slave} blocks
slave CPUs in early boot until all of them come up. This no longer
works because blocking a CPU with interrupts off after notifying the
CPU to be online causes problems with the current kernel.

Specifically, after the workqueue changes
(commit a08489c5 "Pull workqueue changes from Tejun Heo")
the CPU_ONLINE notification callback workqueue_cpu_up_callback()
will hang on wait_for_completion(&idle_rebind.done), if the slave
CPUs are blocked for synchronize_count_slave().

The changes are to update synchronize_count_{master,slave}() to handle
one CPU at a time and to call synchronise_count_master() in __cpu_up()
so that the CPU_ONLINE notification goes out only after the COP0 COUNT
register is synchronized.

[ralf@linux-mips.org: This matter only to those few platforms which are
using the cp0 counter as their clocksource which are XLP, XLR and MIPS'
CMP solution.]
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4216/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().

Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Cc: jonas.gorski@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3983/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The relocation code was essentially taken from the 2.4 modutils which
perform relocation in userspace.  In 2.6 relocation of multiple modules
may be performed in parallel by the in-kernel loader so the global
variable mips_hi16_list won't fly anymore.  Fix race by moving it into
mod_arch_specific.

[ralf@linux-mips.org: folded in Tony's followup fix.  Thanks Tony!]
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NTony Wu <tung7970@gmail.com>
Cc:  linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/4189/

The AR724[12] SoCs have more GPIO lines than the AR7240.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: Cc: linux-mips@linux-mips.org
Patchwork: https://http://patchwork.linux-mips.org/patch/4167/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since 3.6.0-rc1,  We are getting many messages like:

WARNING: at kernel/irq/irqdomain.c:444 irq_domain_associate_many+0x23c/0x260()
Modules linked in:
Call Trace:
[<ffffffff814cb698>] dump_stack+0x8/0x34
[<ffffffff81133d00>] warn_slowpath_common+0x78/0xa8
[<ffffffff81187e44>] irq_domain_associate_many+0x23c/0x260
[<ffffffff81187f38>] irq_create_mapping+0xd0/0x220
[<ffffffff81188104>] irq_create_of_mapping+0x7c/0x158
[<ffffffff813e5f08>] irq_of_parse_and_map+0x28/0x40
.
.
.

Both the CIU and GPIO interrupt domains were somewhat screwed up.

For the CIU domain, we need to call irq_domain_associate() for each of
the preassigned irq numbers.  For the GPIO domain, we were applying
the register bit offset in octeon_irq_gpio_xlat, but it should be done
in octeon_irq_gpio_map instead.

Also: Reserve all 8 'core' irqs for the 'core' irq_chip so that they
don't get used by the other domains.  Remove unused OCTEON_IRQ_*
symbols.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4190/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For unexplainable reasons the Loongson 2 clock API was implemented in a
module so fixing this involved shifting large amounts of code around.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Rather than #define the options manually in the architecture code, add
Kconfig options for them and select them there instead.  This also allows
us to select the compat IPC version parsing automatically for platforms
using the old compat IPC interface.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds basic platform devices for Loongson 1B, including serial port,
ethernet, USB, RTC and interrupt handler.

The Loongson 1B UART is compatible with NS16550A, the Loongson 1B GMAC is
built around a Synopsys IP Core.

Use normal instead of enhanced descriptors.

Thanks to Giuseppe for updating the normal descriptor in stmmac driver.
Thanks to Zhao Zhang for implementing the RTC driver.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: zhzhl555@gmail.com
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/4133/
Patchwork: https://patchwork.linux-mips.org/patch/4134/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On XLP, the dcache size depends on the number of enabled threads in
core. There are no dcache aliases if the pagesize is large enough or
if enough threads are enabled in the core.

Remove the #define for cpu_has_dc_aliases and leave it to be computed
at runtime.
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4099/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add IRT to IRQ translation for the MMC and I2C IRQs.
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3761/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The XLP USB controller appears as a device on the internal SoC PCIe
bus, the block has 2 EHCI blocks and 4 OHCI blocks. Change are to:

* Add files netlogic/xlp/usb-init.c and asm/netlogic/xlp-hal/usb.h
  to initialize the USB controller and define PCI fixups. The PCI
  fixups are to setup interrupts and DMA mask.
* Update include/asm/xlp-hal/{iomap.h,pic.h,xlp.h} to add interrupt
  mapping for EHCI/OHCI interrupts.
Signed-off-by: NGanesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3756/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Adds support for the XLP on-chip PCIe controller. On XLP, the
on-chip devices(including the 4 PCIe links) appear in the PCIe
configuration space of the XLP as PCI devices.

The changes are to initialize and register the PCIe controller,
enable hardware byte swap in the PCIe IO and MEM space, and to
enable PCIe interrupts.
Signed-off-by: NGanesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3760/
Patchwork: https://patchwork.linux-mips.org/patch/4104/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Changes to add support for the boot NOR flash on XLR boards and the
boot NAND/NOR flash drivers on the XLS boards.
Signed-off-by: NGanesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3758/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove NETLOGIC_ prefix from gpio register definitions, this will
bring it in-line with the other Netlogic headers.

Having NETLOGIC prefix here is misleading because these are XLR/XLS
specific register definitions.
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3754/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Update for core intialization code.  Initialize status register
after receiving NMI for CPU wakeup. Add the low level L1D flush
code before enabling threads in core.

Also convert the ehb to _ehb so that it works under more GCC
versions.
Signed-off-by: NJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3755/
Patchwork: https://patchwork.linux-mips.org/patch/4095/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add support for the PCIe port found on BCM6328.
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3956/Reviewed-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This includes CPU speed, memory size detection and working UART, but
lacking the appropriate drivers, no support for attached flash.
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3951/Reviewed-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On BCM6358 and BCM6368 the attached flash type is exposed through a
bootstrapping register. Use it for auto detecting the flash type on
those and default to parallel flash for earlier SoCs.
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3954/Reviewed-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

board_bcm963xx.c is already large enough.
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3952/Reviewed-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: mpm@selenic.com
Cc: herbert@gondor.apana.org.au
Patchwork: https://patchwork.linux-mips.org/patch/3326/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These FPA related files are not used anywhere in the kernel.  Remove
them.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3892/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Loongson 1B is a 32-bit SoC designed by Institute of Computing Technology
(ICT) and the Chinese Academy of Sciences (CAS), which implements the
MIPS32 release 2 instruction set.

[ralf@linux-mips.org: But which is not strictly a MIPS32 compliant device
which also is why it identifies itself with the Legacy Vendor ID in the
PrID register.  When applying the patch I shoveled some code around to
keep things in alphabetical order and avoid forward declarations.]
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: zhzhl555@gmail.com
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3976/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The platform data can now specify which external memory banks to probe
for NAND chips, and in which order. Banks that contain a NAND are used
and the other banks are freed.

Squashed version of development done in jz-2.6.38 branch.
Original patch by Lars-Peter Clausen with some bug fixes from me.
Thanks to Paul Cercueil for the initial autodetection patch.
Signed-off-by: NMaarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3560/Acked-By: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A number of new instructions have been added to the micro assembler causing
the list to no longer be in alphabetical order. This patch fixes up the name
ordering.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3789/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We can save the 451 lines of code that comprise memcpy-inatomic.S at the
expense of a single instruction in the memcpy prolog.  We also use an
additional register (t6), so this may cause increased register pressure in
some places as well.  But I think the reduced maintenance burden, of not
having two nearly identical implementations, makes it worth it.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3336/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3335/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3603/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There are three parts to this:

1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2.
   The interrupts are specified by the device tree and these hard
   coded irq numbers block the used of the irq lines by the irq_domain
   code.

2) Remove platform device setup code from octeon-platform.c, it is
   now unused.

3) Convert i2c-octeon.c to use device tree.  Part of this includes
   using the devm_* functions instead of the raw counterparts, thus
   simplifying error handling.  No functionality is changed.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3939/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This code is not common enough to be in a shared file.  It is also not
used by any existing boards, so just remove it.

[ralf@linux-mips.org: Dropped removal of irq_create_of_mapping which was
already removed by abd2363f
[irq_domain/mips: Allow irq_domain on MIPS].  Moved device_tree_init() and
dependencies to its sole user, the XLP code.]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: grant.likely@secretlab.ca
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The follow-on patch to add irq_domain support will be the supported
method for using these irq lines, so get these defines out of the way
in preperation for that.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc:  linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3930/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This symbol will be removed, so don't use it as part of the definition of
OCTEON_IRQ_LAST.

Set OCTEON_IRQ_LAST to 127 so there is space for all the automatically
allocated (via irq_domain) irqs.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These FPA related files are not used anywhere in the kernel.  Remove
them.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3892/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds the necessary stub to register the SPI platform driver.
Since the registers are shuffled between the 4 BCM63xx CPUs supported by
this SPI driver we also need to generate the internal register layout and
export this layout for the driver to use it properly.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3321/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BCM6338, BCM6348, BCM6358 and BCM6368 basically use the same SPI controller
though the internal registers are shuffled, which still allows a common
driver to drive that IP block.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3318/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This register was introduced with the support of the BCM6368 CPU in the idea
that its internal layout was different from the other CPUs SPI controller.
The controller is actually the same as the one present on BCM6358 so we can
remove this register and use the usual SPI register instead.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3316/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There are two distinct sizes for the SPI register depending on the SoC
generation (6338 & 6348 vs 6358 & 6368).
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3314/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3315/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Patchwork: https://patchwork.linux-mips.org/patch/3320/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>