- 02 5月, 2012 3 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
Move the error handling for nfs_generic_pagein() into a single function. Ditto for nfs_generic_flush(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
Remove unused variables, and reformat some code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 28 4月, 2012 6 次提交
-
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Both nfs_read_data and nfs_write_data devote several fields which can be combined into a single shared struct. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In order to avoid duplicating all the data in nfs_read_data whenever we split it up into multiple RPC calls (either due to a short read result or due to rsize < PAGE_SIZE), we split out the bits that are the same per RPC call into a separate "header" structure. The goal this patch moves towards is to have a single header refcounted by several rpc_data structures. Thus, want to always refer from rpc_data to the header, and not the other way. This patch comes close to that ideal, but the directio code currently needs some special casing, isolated in the nfs_direct_[read_write]hdr_release() functions. This will be dealt with in a future patch. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Make it consistent with nfs_initiate_commit. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 4月, 2012 1 次提交
-
-
由 Fred Isaman 提交于
Cc: <stable@vger.kernel.org> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 21 3月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This is an NFS v4 specific operation, so it belongs in the NFS v4 code and not the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Move more pnfs-isms out of the generic commit code. Bugfixes: - filelayout_scan_commit_lists doesn't need to get/put the lseg. In fact since it is run under the inode->i_lock, the lseg_put() can deadlock. - Ensure that we distinguish between what needs to be done for commit-to-data server and what needs to be done for commit-to-MDS using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling put_lseg() on a bucket for a struct nfs_page that got written through the MDS. - Fix a case where we were using list_del() on an nfs_page->wb_list instead of list_del_init(). - filelayout_initiate_commit needs to call filelayout_commit_release on error instead of the mds_ops->rpc_release(). Otherwise it won't clear the commit lock. Cleanups: - Let the files layout manage the commit lists for the pNFS case. Don't expose stuff like pnfs_choose_commit_list, and the fact that the commit buckets hold references to the layout segment in common code. - Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg into the pNFS layer from whence they came. - Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Clean up Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 11月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 10月, 2011 4 次提交
-
-
由 Trond Myklebust 提交于
We don't need a mempool in order to guarantee reliable NFS read performance. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Don't rely on the PageError flag to tell us if one of the partial reads of the page failed. Instead, replace that with a dedicated flag in the struct nfs_page. Then clean out redundant uses of the PageError flag: the VM no longer checks it for reads. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The generic file read code does that for us anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It can trivially be replaced with rpc_restart_call_prepare. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 10月, 2011 1 次提交
-
-
由 Peng Tao 提交于
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
just dentry, please... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 7月, 2011 6 次提交
-
-
由 Trond Myklebust 提交于
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of completely reinitialising the struct nfs_pageio_descriptor. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Instead of looking up the rsize and wsize, the routines that generate the RPC requests should really be using the pg_bsize, since that is what we use when deciding whether or not to coalesce write requests... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and do the same for nfs_flush_multi/one. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2011 5 次提交
-
-
由 Trond Myklebust 提交于
Split them up into two parts: one which sets up the struct nfs_read/write_data, the other which sets up the actual RPC call or pNFS call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Ask for whole file layouts. Until support for layout segments is fully supported in the file layout code, discard non-whole file layouts. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 5月, 2011 2 次提交
-
-
由 Benny Halevy 提交于
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Add offset and count parameters to pnfs_update_layout and use them to get the layout in the pageio path. Order cache layout segments in the following order: * offset (ascending) * length (descending) * iomode (RW before READ) Test byte range against the layout segment in use in pnfs_{read,write}_pg_test so not to coalesce pages not using the same layout segment. [fix lseg ordering] [clean up pnfs_find_lseg lseg arg] [remove unnecessary FIXME] [fix ordering in pnfs_insert_layout] [clean up pnfs_insert_layout] Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
- 12 5月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
Currently, writebacks may end up recursing back into the filesystem due to GFP_KERNEL direct reclaims in the pnfs subsystem. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 3月, 2011 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 3月, 2011 4 次提交
-
-
由 Fred Isaman 提交于
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Use our own async error handler. Mark the layout as failed and retry i/o through the MDS on specified errors. Update the mds_offset in nfs_readpage_retry so that a failed short-read retry to a DS gets correctly resent through the MDS. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Attempt a pNFS file layout read by setting up the nfs_read_data struct and calling nfs_initiate_read with the data server rpc client and the filelayout rpc call ops. Error handling is implemented in a subsequent patch. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Tested-by: NGuo Mingyang <guomingyang@nrchpc.ac.cn> Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-