- 11 1月, 2010 18 次提交
-
-
由 Ben Skeggs 提交于
Depending on the visual, the colours handed to us in fillrect() can either be an actual colour, or an index into the pseudo-palette. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Maarten Maathuis 提交于
- This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
-
由 Maarten Maathuis 提交于
- Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Marcin Slusarz 提交于
struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
- 18 12月, 2009 1 次提交
-
-
由 Arnd Bergmann 提交于
drm_ioctl is called with the Big Kernel Lock held, which shows up very high in statistics on vfs_ioctl. Moving the lock into the drm_ioctl function itself makes sure we blame the right subsystem and it gets us one step closer to eliminating the locked version of fops->ioctl. Since drm_ioctl does not require the lock itself, we only need to hold it while calling the specific handler. The 32 bit conversion handlers do not interact with any other code, so they don't need the BKL here either and can just call drm_ioctl. As a bonus, this cleans up all the other users of drm_ioctl which now no longer have to find the inode or call lock_kernel. [airlied: squashed the non-driver bits of the second patch in here, this provides the flag for drivers to use to select unlocked ioctls - but doesn't modify any drivers]. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.sourceforge.net Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 12月, 2009 13 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Previously, if there was no firmware available, the DRM would just disable channel creation from userspace, but still use a single channel for its own purposes. With a bit of care it should actually be possible to do this, due to the DRM's very limited use of the engine. It currently doesn't work correctly however, resulting in corrupted fbcon and hangs on a number of cards. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This avoids touching the dummy channel 0/127 we have on nv50. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The context programs are *very* simple compared to the ones used by the binary driver. There's notes in nv40_grctx.c explaining most of the things we don't implement. If we discover if/why any of it is required further down the track, we'll handle it then. The PGRAPH state generated for each chipset should match what NVIDIA do almost exactly (there's a couple of exceptions). If someone has a lot of time on their hands, they could figure out the mapping of object/method to PGRAPH register and demagic the initial state a little, it's not terribly important however. At time of commit, confirmed to be working at least well enough for accelerated X (and where tested, for 3D apps) on NV40, NV43, NV44, NV46, NV49, NV4A, NV4B and NV4E. A module option has been added to force the use of external firmware blobs if it becomes required. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Kościelnicki 提交于
Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Kościelnicki 提交于
Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Kościelnicki 提交于
Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Kościelnicki 提交于
Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net> Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Maathuis 提交于
- Use driver level (0x2) for NV_DEBUG instead of all levels - Create a NV_DEBUG_KMS for KMS level (0x4) and use them in modesetting code - Remove a few odd NV_TRACE calls and replace some of them with NV_DEBUG_KMS or NV_INFO Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 12月, 2009 4 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
When switching to request_firmware() to load the context programs, some endian fixes need to be applied. This makes it work again on my quad g5 nvidia 6600. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Randy Dunlap 提交于
The ch7006 driver could be built even when nouveau was not enabled, but the build fails in that case, so make it depend on DRM_NOUVEUA. Also make the I2c encoder/helper chips menu depend on I2C (no build error, just visual inspection). ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/i2c/ch7006.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 12月, 2009 1 次提交
-
-
由 Ben Skeggs 提交于
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-