If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Andreas Schwab noticed that the 1 << tk->shift could overflow if the
shift value was greater than 30, since 1 would be a 32bit long on
32bit architectures. This issue was introduced by 1e75fa8b (time:
Condense timekeeper.xtime into xtime_sec)

Use 1ULL instead to ensure we don't overflow on the shift.
Reported-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

arch_gettimeoffset returns a u32 value which when shifted by tk->shift
can overflow. This issue was introduced with 1e75fa8b (time: Condense
timekeeper.xtime into xtime_sec)

Cast it to u64 first.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Andreas noticed problems with resume on specific hardware after commit
1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined
with commit b44d50dc (time: Fix casting issue in tk_set_xtime and
tk_xtime_add)

After some digging I realized we aren't normalizing the timekeeper
after the add. Add the missing normalize call.
Reported-by: NAndreas Schwab <schwab@linux-m68k.org>
Tested-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Unexpected behavior could occur if the time is set to a value large
enough to overflow a 64bit ktime_t (which is something larger then the
year 2262).

Also unexpected behavior could occur if large negative offsets are
injected via adjtimex.

So this patch improves the sanity check timekeeping inputs by
improving the timespec_valid() check, and then makes better use of
timespec_valid() to make sure we don't set the time to an invalid
negative value or one that overflows ktime_t.

Note: This does not protect from setting the time close to overflowing
ktime_t and then letting natural accumulation cause the overflow.
Reported-by: NCAI Qian <caiqian@redhat.com>
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull leds fixes/revert from Bryan Wu.

* 'fixes-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: renesas: fix error handling
  Revert "leds: use led_set_brightness in led_trigger_event"
  leds: lp8788: Fix updating scale configuration bits

bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and
cleanup error exit path" introduced a possible case in which r_tpu_probe
calls iounmap on a wild pointer. This changes the one case that was
missed in the same way as the other error paths.

Without this patch, building kota2_defconfig results in:

drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe':
drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

This reverts commit a0193cbe.

The problem with the original commit was that it caused a warning with
the MMC trigger calling del_timer_sync from hard-irq context.
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Reported-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Pull networking changes from David Miller:
 "Most importantly this should cure the ipv4-mapped ipv6 socket TCP
  crashes some people were seeing, otherwise:

   1) Fix e1000e autonegotiation handling regression, from Tushar Dave.

   2) Fix TX data corruption race on e1000e down, also from Tushar Dave.

   3) Fix bfin_sir IRDA driver build, from Sonic Zhang.

   4) AF_PACKET mmap() tests a flag in the TX ring shared between
      userspace and the kernel for an internal consistency check.  It
      really shouldn't do this to validate the kernel's own behavior
      because the user can corrupt it to be any value at all.  From
      Daniel Borkmann.

   5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet.

   6) Orphan the anonymous TCP socket from the SKB in
      ip_send_unicast_reply() so that the rest of the stack needn't see
      it.  Otherwise we get selinux problems of all sorts, from Eric
      Dumazet.

      This is the best way to fix this since the socket is just a place
      holder for sending packets in a context where we have no real
      socket at all.

   7) Fix TUN detach crashes, from Stanislav Kinsbursky.

   8) dev_set_alias() leaks memory on krealloc() failure, from Alexey
      Khoroshilov.

   9) FIB trie must use call_rcu() not call_rcu_bh(), because this code
      is not universally invoked from software interrupts.  From Eric
      Dumazet.

  10) PPTP looks up ipv4 routes with the wrong network namespace, fix
      from Gao Feng."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  bnx2x: Fix compiler warnings
  af_packet: remove BUG statement in tpacket_destruct_skb
  macvtap: rcu_dereference outside read-lock section
  codel: refine one condition to avoid a nul rec_inv_sqrt
  ixgbe: add missing braces
  ipv4: fix ip_send_skb()
  net: tcp: ipv6_mapped needs sk_rx_dst_set method
  ipv4: tcp: unicast_sock should not land outside of TCP stack
  bnx2x: Fix recovery flow cleanup during probe
  bnx2x: fix unload previous driver flow when flr-capable
  tun: don't zeroize sock->file on detach
  igb: Fix register defines for all non-82575 hardware
  e1000e: fix panic while dumping packets on Tx hang with IOMMU
  igb: fix panic while dumping packets on Tx hang with IOMMU
  tcp: must free metrics at net dismantle
  net/stmmac: mark probe function as __devinit
  lpc_eth: remove obsolete ifdefs
  net/core: Fix potential memory leak in dev_set_alias()
  cdc-phonet: Don't leak in usbpn_open
  batman-adv: Fix mem leak in the batadv_tt_local_event() function
  ...

Pull tcm_vhost level target fabric driver from Nicholas Bellinger:
 "Here is the PULL request for the initial merge of tcm_vhost based on
  RFC-v5 code with MST's ACK appended to the initial merge commit."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcm_vhost: Initial merge for vhost level target fabric driver

Fix the following compiler warnings:

 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison
   of distinct pointer types lacks a cast [enabled by default]
 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison
   of distinct pointer types lacks a cast [enabled by default]
Signed-off-by: NJoren Van Onder <joren.vanonder@gmail.com>
Acked-By: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here's a quote of the comment about the BUG macro from asm-generic/bug.h:

 Don't use BUG() or BUG_ON() unless there's really no way out; one
 example might be detecting data structure corruption in the middle
 of an operation that can't be backed out of.  If the (sub)system
 can somehow continue operating, perhaps with reduced functionality,
 it's probably not BUG-worthy.

 If you're tempted to BUG(), think again:  is completely giving up
 really the *only* solution?  There are usually better options, where
 users don't need to reboot ASAP and can mostly shut down cleanly.

In our case, the status flag of a ring buffer slot is managed from both sides,
the kernel space and the user space. This means that even though the kernel
side might work as expected, the user space screws up and changes this flag
right between the send(2) is triggered when the flag is changed to
TP_STATUS_SENDING and a given skb is destructed after some time. Then, this
will hit the BUG macro. As David suggested, the best solution is to simply
remove this statement since it cannot be used for kernel side internal
consistency checks. I've tested it and the system still behaves /stable/ in
this case, so in accordance with the above comment, we should rather remove it.
Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rcu_dereference occurs in update section. Replacement by
rcu_dereference_protected in order to prevent lockdep
complaint.

Found by Linux Driver Verification project (linuxtesting.org)
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull gpio fixes from Linus Walleij:
 - Fix a resource leak in the SCH driver
 - Fix the register address calculation in the MSIC driver
 - Fix the PXA driver's devicetree functions
 - Delete redundant shadow variable leftovers in the MXC driver
 - Specify the GPIO base for the device tree probe in the MXC driver
 - Add a modalias for the i.MX driver
 - Fix off-by-one bug in the Samsung driver
 - Fix erroneous errorpath in the Langwell driver

* tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  drivers/gpio/gpio-langwell.c: fix error return code
  gpio: samsung: Fix off-by-one bug in gpio addresses
  ARM: dts: imx: add alias for gpio
  gpio/mxc: specify gpio base for device tree probe
  gpio/mxc: remove redundant shadow variables initialization
  GPIO: gpio-pxa: fix devicetree functions
  gpio: msic: Fix calculating register address in msic_gpio_to_oreg()
  gpio-sch: Fix leak of resource

Pull a security subsystem fix from James Morris
 "This fixes an issue in the Yama LSM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Yama: higher restrictions should block PTRACE_TRACEME

Pull power management fixes from Rafael J. Wysocki:

 - Fix for two recent regressions in the generic PM domains framework.

 - Revert of a commit that introduced a resume regression and is
   conceptually incorrect in my opinion.

 - Fix for a return value in pcc-cpufreq.c from Julia Lawall.

 - RTC wakeup signaling fix from Neil Brown.

 - Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI,
   platform/x86 and TPM drivers.

* tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP
  platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP
  ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP
  Revert "NMI watchdog: fix for lockup detector breakage on resume"
  PM: Make dev_pm_get_subsys_data() always return 0 on success
  drivers/cpufreq/pcc-cpufreq.c: fix error return code
  RTC: Avoid races between RTC alarm wakeup and suspend.

Pull arm-soc bug fixes from Arnd Bergmann:
 "These are a bunch of bug fixes that came in after the merge window and
  one update for the MAINTAINERS file.

  The largest part of the fixes are patches that address bugs found by
  building all the ARM defconfig files.  There are a lot more warnings
  that we have patches for, but the others are either still under
  discussion or are harmless and do not cause actual problems besides
  making the build slightly noisy."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
  ARM: davinci: remove broken ntosd2_init_i2c
  ARM: s3c24xx: enable CONFIG_BUG for tct_hammer
  omap-rng: fix use of SIMPLE_DEV_PM_OPS
  spi/s3c64xx: improve error handling
  mtd/omap2: fix dmaengine_slave_config error handling
  gpio: em: do not discard em_gio_irq_domain_cleanup
  ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
  ARM: imx: gpmi-nand depends on mxs-dma
  ARM: integrator: include <linux/export.h>
  ARM: s3c24xx: use new PWM driver
  ARM: sa1100: include linux/io.h in hackkit leds code
  Input: eeti_ts: pass gpio value instead of IRQ
  ARM: pxa: remove irq_to_gpio from ezx-pcap driver
  ARM: tegra: more regulator fixes for Harmony
  usb/ohci-omap: remove unused variable
  mfd/asic3: fix asic3_mfd_probe return value
  ARM: kirkwood: fix typo in Makefile.boot
  i.MX27: Fix emma-prp and csi clocks.
  ARM: integrator: use clk_prepare_enable() for timer
  MAINTAINERS: update entry for Linus Walleij
  ...

Merge branch 'fixes-for-linus-for-3.6-rc2' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull three dma-mapping fixes from Marek Szyprowski.

* 'fixes-for-linus-for-3.6-rc2' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: fix incorrect freeing of atomic allocations
  ARM: dma-mapping: fix atomic allocation alignment
  ARM: mm: fix MMU mapping of CMA regions

Pull btrfs merge fix from Chris Mason:
 "This fixes a merge error in rc1.  The calls to mnt_want_write should
  have been removed."

* 'for-linus-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove mnt_want_write call in btrfs_mksubvol

While tracking down a weird buffer overflow issue in a program that
looked to be sane, I started double checking the length returned by
syslog(SYSLOG_ACTION_READ_ALL, ...) to make sure it wasn't overflowing
the buffer.

Sure enough, it was.  I saw this in strace:

  11339 syslog(SYSLOG_ACTION_READ_ALL, "<5>[244017.708129] REISERFS (dev"..., 8192) = 8279

It turns out that the loops that calculate how much space the entries
will take when they're copied don't include the newlines and prefixes
that will be included in the final output since prev flags is passed as
zero.

This patch properly accounts for it and fixes the overflow.

CC: stable@kernel.org
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

To keep codel_vars_init() as efficient as possible, refine
the condition to make sure rec_inv_sqrt initial value is correct

Many thanks to Anton Mich for discovering the issue and suggesting
a fix.
Reported-by: NAnton Mich <lp2s1h@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds missing braces around the 10gig link check to include the check for  KR support.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Reported-by: NSascha Wildner <saw@online.de>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Here is a handful of fixes intended for 3.6.

Daniel Drake offers a cfg80211 fix to consume pending events before
taking a wireless device down.  This prevents a resource leak.

Stanislaw Gruszka gives us a fix for a NULL pointer dereference in
rt61pci.

Johannes Berg provides an iwlwifi patch to disable "greenfield" mode.
Use of that mode was causing a rate scaling problem in for iwlwifi.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_send_skb() can send orphaned skb, so we must pass the net pointer to
avoid possible NULL dereference in error path.

Bug added by commit 3a7c384f (ipv4: tcp: unicast_sock should not
land outside of TCP stack)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

According to a compiler warning, the tpm_tis_resume() function is not
used for CONFIG_PM_SLEEP unset, so add a #ifdef to prevent it from
being built in that case.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

According to compiler warnings, quite some suspend/resume functions
in platform x86 drivers are not used for CONFIG_PM_SLEEP unset, so
add #ifdefs to prevent them from being built in that case.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to
be populated with at least one member. gcc correctly warns about
the out-of-bounds access here.

Since this can not possibly work, it's better to disable i2c
support entirely on this board.

Without this patch, building davinci_all_defconfig results in:

arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init':
arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Andrey Porodko <panda@chelcom.ru>

Disabling CONFIG_BUG creates an insane amount of build warnings, which
makes it useless to check for building defconfigs to see if new
warnings show up.

Without this patch, building tct_hammer_defconfig results in:

net/packet/af_packet.c: In function 'tpacket_rcv':
net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized]
net/core/ethtool.c: In function 'ethtool_get_feature_mask':
net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type]
block/cfq-iosched.c: In function 'cfq_async_queue_prio':
block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type]
mm/bootmem.c: In function 'mark_bootmem':
mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type]
net/core/dev.c: In function 'skb_warn_bad_offload':
net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable]
drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup':
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
(and many more)

The size of vmlinux increases by 1.78% because of this:

size obj-arm/vmlinux.nobug
   text    data     bss     dec     hex filename
   2108474  116916   55352 2280742  22cd26 obj-arm/vmlinux
size obj-arm/vmlinux.bug
   text    data     bss     dec     hex filename
   2150804  116916   53696 2321416  236c08 obj-arm/vmlinux
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

These patches all fix bugs that were newly introduced in v3.6-rc1
and found because they cause a gcc warning with one of the ARM
defconfigs. Most of them are harmless, but since we're trying
to get rid of all warnings eventually, we can start with the ones
that were not there before.

* testing/new-warnings:
  omap-rng: fix use of SIMPLE_DEV_PM_OPS
  spi/s3c64xx: improve error handling
  mtd/omap2: fix dmaengine_slave_config error handling
  gpio: em: do not discard em_gio_irq_domain_cleanup
  ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
  usb/ohci-omap: remove unused variable
  mfd/asic3: fix asic3_mfd_probe return value
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

omap_rng_suspend and omap_rng_resume are unused if CONFIG_PM is enabled
but CONFIG_PM_SLEEP is disabled. I found this while building all defconfig
files on ARM. It's not clear to me if this is the right solution, but
at least it makes the code consistent again.

Without this patch, building omap1_defconfig results in:

drivers/char/hw_random/omap-rng.c:165:12: warning: 'omap_rng_suspend' defined but not used [-Wunused-function]
drivers/char/hw_random/omap-rng.c:171:12: warning: 'omap_rng_resume' defined but not used [-Wunused-function]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKevin Hilman <khilman@ti.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>

When a device tree definition os an s3c64xx SPI master is missing
a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata
function might use uninitialized memory in place of that node,
which was correctly reported by gcc.

Without this patch, building s3c6400_defconfig results in:

drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25':
drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>

The newly added dmaengine support in the omap2 nand driver
potentially causes an undefined return value from the
omap_nand_probe function when dmaengine_slave_config
reports an error. Let's handle this by returning the
same error back to the caller.

Without this patch, building omap2plus_defconfig results in:

drivers/mtd/nand/omap2.c: In function 'omap_nand_probe':
drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Grazvydas Ignotas <notasas@gmail.com>

The newly added gpio-em driver marks its em_gio_irq_domain_cleanup
function as __devexit, which would lead to that function being
discarded in case CONFIG_HOTPLUG is disabled. However, the function
is also called by the error handling logic em_gio_probe, which
would cause a jump into a NULL pointer if it was removed from the
kernel or module.

Without this patch, building kzm9d_defconfig results in:

WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup()
The function __devinit em_gio_probe() references
a function __devexit em_gio_irq_domain_cleanup().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
em_gio_irq_domain_cleanup() so it may be used outside an exit section.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>

exynos_pm_add_dev_to_genpd is used if one or more out of a large
number of Kconfig symbols are enabled. However the new
exynos_defconfig selects none of those, so the function becomes
unused. Marking it so lets the compiler automatically discard
it.

Without this patch, building exynos_defconfig results in:

arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>

The higher ptrace restriction levels should be blocking even
PTRACE_TRACEME requests. The comments in the LSM documentation are
misleading about when the checks happen (the parent does not go through
security_ptrace_access_check() on a PTRACE_TRACEME call).
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 3.5.x and later
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

commit 5d299f3d (net: ipv6: fix TCP early demux) added a
regression for ipv6_mapped case.

[   67.422369] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[   67.449678] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[   92.631060] BUG: unable to handle kernel NULL pointer dereference at
(null)
[   92.631435] IP: [<          (null)>]           (null)
[   92.631645] PGD 0
[   92.631846] Oops: 0010 [#1] SMP
[   92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror
dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp
parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event
snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore
snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd
uhci_hcd
[   92.634294] CPU 0
[   92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3
[   92.634294] RIP: 0010:[<0000000000000000>]  [<          (null)>]
(null)
[   92.634294] RSP: 0018:ffff880245fc7cb0  EFLAGS: 00010282
[   92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX:
0000000000000000
[   92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI:
ffff88024827ad00
[   92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09:
0000000000000000
[   92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12:
ffff880254735380
[   92.634294] R13: ffff880254735380 R14: 0000000000000000 R15:
7fffffffffff0218
[   92.634294] FS:  00007f4516ccd6f0(0000) GS:ffff880256600000(0000)
knlGS:0000000000000000
[   92.634294] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4:
00000000000007f0
[   92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[   92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000,
task ffff880254b8cac0)
[   92.634294] Stack:
[   92.634294]  ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8
ffff880245fc7d68
[   92.634294]  ffffffff81385083 00000000001d2680 ffff8802547353a8
ffff880245fc7d18
[   92.634294]  ffffffff8105903a ffff88024827ad60 0000000000000002
00000000000000ff
[   92.634294] Call Trace:
[   92.634294]  [<ffffffff813837a7>] ? tcp_finish_connect+0x2c/0xfa
[   92.634294]  [<ffffffff81385083>] tcp_rcv_state_process+0x2b6/0x9c6
[   92.634294]  [<ffffffff8105903a>] ? sched_clock_cpu+0xc3/0xd1
[   92.634294]  [<ffffffff81059073>] ? local_clock+0x2b/0x3c
[   92.634294]  [<ffffffff8138caf3>] tcp_v4_do_rcv+0x63a/0x670
[   92.634294]  [<ffffffff8133278e>] release_sock+0x128/0x1bd
[   92.634294]  [<ffffffff8139f060>] __inet_stream_connect+0x1b1/0x352
[   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[   92.634294]  [<ffffffff8104b333>] ? wake_up_bit+0x25/0x25
[   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[   92.634294]  [<ffffffff8139f223>] ? inet_stream_connect+0x22/0x4b
[   92.634294]  [<ffffffff8139f234>] inet_stream_connect+0x33/0x4b
[   92.634294]  [<ffffffff8132e8cf>] sys_connect+0x78/0x9e
[   92.634294]  [<ffffffff813fd407>] ? sysret_check+0x1b/0x56
[   92.634294]  [<ffffffff81088503>] ? __audit_syscall_entry+0x195/0x1c8
[   92.634294]  [<ffffffff811cc26e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   92.634294]  [<ffffffff813fd3e2>] system_call_fastpath+0x16/0x1b
[   92.634294] Code:  Bad RIP value.
[   92.634294] RIP  [<          (null)>]           (null)
[   92.634294]  RSP <ffff880245fc7cb0>
[   92.634294] CR2: 0000000000000000
[   92.648982] ---[ end trace 24e2bed94314c8d9 ]---
[   92.649146] Kernel panic - not syncing: Fatal exception in interrupt

Fix this using inet_sk_rx_dst_set(), and export this function in case
IPv6 is modular.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit be9f4a44 (ipv4: tcp: remove per net tcp_sock) added a
selinux regression, reported and bisected by John Stultz

selinux_ip_postroute_compat() expect to find a valid sk->sk_security
pointer, but this field is NULL for unicast_sock

It turns out that unicast_sock are really temporary stuff to be able
to reuse  part of IP stack (ip_append_data()/ip_push_pending_frames())

Fact is that frames sent by ip_send_unicast_reply() should be orphaned
to not fool LSM.

Note IPv6 never had this problem, as tcp_v6_send_response() doesnt use a
fake socket at all. I'll probably implement tcp_v4_send_response() to
remove these unicast_sock in linux-3.7
Reported-by: NJohn Stultz <johnstul@us.ibm.com>
Bisected-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During probe, every function probed clears the recovery registers from
all functions on its path - thus signaling that given a future recovery
event, there will be no need to wait for those functions.

This is a flawed behaviour - each function should only be responsible
for its own bit.

Since this registers are handled during the load/unload routines,
this cleanup is removed altogether.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>