[Needed for HSDK]

 - Currently IOC base is hardcoded to 0x8000_0000 which is default value
   of LINUX_LINK_BASE, but may not always be the case

 - IOC programming model imposes the constraint that IOC aperture size
   needs to be aligned to IOC base address, which we were not checking
   so far.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
[vgupta: reworked the changelog]

with clk frequency setting code gone by prev commits, we can elide the
unconditonal DT parsing to the specific case of quad core config where
we possibly need to fudge the DT value.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Add core pll node (core_clk) to manage cpu frequency.
core_clk represents pll itself.
input_clk represents clock signal source (basically xtal) which
comes to pll input.
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

historically axs103 platform code used to set the cpu clk by writing to
PLL registers directly. however the axs10x clk driver is now upstream so
no need to do this amymore.

Driver is selected automatically when CONFIG_ARC_PLAT_AXS10X is set
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
[vgupta: deleted more code not needed anymore]

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Current implementation relies on L1 line length which might easily
be smaller than L2 line (which is usually the case BTW).

Imagine this typical case: L2 line is 128 bytes while L1 line is
64-bytes. Now we want to allocate small buffer and later use it for DMA
(consider IOC is not available).

kmalloc() allocates small KMALLOC_MIN_SIZE-sized, KMALLOC_MIN_SIZE-aligned
That way if buffer happens to be aligned to L1 line and not L2 line we'll be
flushing and invalidating extra portions of data from L2 which will cause
cache coherency issues.

And since KMALLOC_MIN_SIZE is bound to ARCH_DMA_MINALIGN the fix could
be simple - set ARCH_DMA_MINALIGN to the largest cache line we may ever
get. As of today neither L1 of ARC700 and ARC HS38 nor SLC might not be
longer than 128 bytes.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Preserve eflags and gpa1 aux during entry/exit into kernel as these
could be modified by kernel mode

These registers used by compare exchange instructions.
  - GPA1 is used for compare value,
  - EFLAGS got bit reflects atomic operation response.

EFLAGS is zeroed for each new user task so it won't get its
parent value.
Signed-off-by: NLiav Rehana <liavr@mellanox.com>
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

save EFLAGS, and GPA1 auxiliary registers during context switch,
since they may be changed by the new task in kernel mode, while using atomic
ops e.g. cmpxchg.
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

HW bug description: in case of HW thread context switch
the dpc configuration of the exiting thread is dragged
one cycle into the next thread.
In order to avoid the consequences of this bug, the DPC register
is set to an initial value, and not changed afterwards.
Signed-off-by: NElad Kanfi <eladkan@mellanox.com>
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This commit add new configuration that enables us to distinguish
between building the kernel for platforms that have a different set
of auxiliary registers for each cpu and platforms that have a shared
set of auxiliary registers across every thread in each core.
On platforms that implement a different set of auxiliary registers
disabling this configuration insures that we initialize registers on
every cpu and not just for the first thread of the core.
Example for non shared registers is working with EZsim (non silicon)
Signed-off-by: NLiav Rehana <liavr@mellanox.com>
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

We add ability for all cores at NPS SoC to control the number of cycles
HW thread can execute before it is replace with another eligible
HW thread within the same core. The replacement is done by the
HW scheduler.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
[vgupta: simplified handlign of out of range argument value]

Some of the boot printing code had printk() w/o explicit log level.

This patch introduces consistency allowing platforms to switch to less
verbose console logging using cmdline.

NPS400 with 4K CPUs needs to avoid the cpu info printing for faster
bootup.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

On ARC700 (and nSIM), user mode memory error triggers an L2 interrupt
which is handled gracefully by kernel (or it tries to despite this being
imprecise, and error could get charged to kernel itself). The offending
task is killed and kernel moves on.

NPS hardware however raises a Machine Check exception for same error
which is NOT recoverable by kernel.

This patch aligns kernel handling for nSIM case, to same as hardware by
overriding the default user space bus error handler.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NElad Kanfi <eladkan@mellanox.com>
[vgupta: rewrote changelog]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

When HW threads are active we want CPU to enter idle state only
for the calling HW thread and not to put on sleep all HW threads
sharing this core. For this need the NPS400 got dedicated instruction
so only calling thread is entring sleep and all other are still awake
and can execute instructions.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
[vgupta: reworked patch to not use inline ifdef but a new function itself]

This paves way for creating a 3rd variant needed for NPS ARC700 without
littering ifdey'ery all over the place
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This way when we execute "ex" during trying to hold lock we can switch to
other HW thread and utilize the core intead of just spinning on a lock.

We noticed about 10% improvement of execution time with hackbench test.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This counter represents threshold for consecutive stall which
would trigger HW threads scheduling. However when enabled, low
threshhold values cause performance degradation and in the
worst case even livelock.

So disable it by resorting to HW reset value
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Reviewed-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
[vgupta: fixed changelog]

Due to a HW bug in NPS400 we get from time to time false TLB miss.
Workaround this by validating each miss.
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NNoam Camus <noamca@mellanox.com>
Reviewed-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NLiav Rehana <liavr@mellanox.com>
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Reviewed-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NLiav Rehana <liavr@mellanox.com>
Signed-off-by: NNoam Camus <noamca@mellanox.com>
Reviewed-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Pull IOMMU fix from Joerg Roedel:
 "Another fix, this time in common IOMMU sysfs code.

  In the conversion from the old iommu sysfs-code to the
  iommu_device_register interface, I missed to update the release path
  for the struct device associated with an IOMMU. It freed the 'struct
  device', which was a pointer before, but is now embedded in another
  struct.

  Freeing from the middle of allocated memory had all kinds of nasty
  side effects when an IOMMU was unplugged. Unfortunatly nobody
  unplugged and IOMMU until now, so this was not discovered earlier. The
  fix is to make the 'struct device' a pointer again"

* tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix wrong freeing of iommu_device->dev

Pull char/misc fix from Greg KH:
 "Here is a single misc driver fix for 4.13-rc7. It resolves a reported
  problem in the Android binder driver due to previous patches in
  4.13-rc.

  It's been in linux-next with no reported issues"

* tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ANDROID: binder: fix proc->tsk check.

Pull staging/iio fixes from Greg KH:
 "Here are few small staging driver fixes, and some more IIO driver
  fixes for 4.13-rc7. Nothing major, just resolutions for some reported
  problems.

  All of these have been in linux-next with no reported problems"

* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: magnetometer: st_magn: remove ihl property for LSM303AGR
  iio: magnetometer: st_magn: fix status register address for LSM303AGR
  iio: hid-sensor-trigger: Fix the race with user space powering up sensors
  iio: trigger: stm32-timer: fix get trigger mode
  iio: imu: adis16480: Fix acceleration scale factor for adis16480
  PATCH] iio: Fix some documentation warnings
  staging: rtl8188eu: add RNX-N150NUB support
  Revert "staging: fsl-mc: be consistent when checking strcmp() return"
  iio: adc: stm32: fix common clock rate
  iio: adc: ina219: Avoid underflow for sleeping time
  iio: trigger: stm32-timer: add enable attribute
  iio: trigger: stm32-timer: fix get/set down count direction
  iio: trigger: stm32-timer: fix write_raw return value
  iio: trigger: stm32-timer: fix quadrature mode get routine
  iio: bmp280: properly initialize device for humidity reading

Pull NTB fixes from Jon Mason:
 "NTB bug fixes to address an incorrect ntb_mw_count reference in the
  NTB transport, improperly bringing down the link if SPADs are
  corrupted, and an out-of-order issue regarding link negotiation and
  data passing"

* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
  ntb: ntb_test: ensure the link is up before trying to configure the mws
  ntb: transport shouldn't disable link due to bogus values in SPADs
  ntb: use correct mw_count function in ntb_tool and ntb_transport

The "lock_page_killable()" function waits for exclusive access to the
page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry
set.

That means that if it gets woken up, other waiters may have been
skipped.

That, in turn, means that if it sees the page being unlocked, it *must*
take that lock and return success, even if a lethal signal is also
pending.

So instead of checking for lethal signals first, we need to check for
them after we've checked the actual bit that we were waiting for.  Even
if that might then delay the killing of the process.

This matches the order of the old "wait_on_bit_lock()" infrastructure
that the page locking used to use (and is still used in a few other
areas).

Note that if we still return an error after having unsuccessfully tried
to acquire the page lock, that is ok: that means that some other thread
was able to get ahead of us and lock the page, and when that other
thread then unlocks the page, the wakeup event will be repeated.  So any
other pending waiters will now get properly woken up.

Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists.  The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.

Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes.  That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.

In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably.  If you have thousands of threads
waiting for the same page, it will be painful.  We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.

That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:

 (a) we don't want to continue walking the page wait list if the bit
     we're waiting for already got set again (which seems to be one of
     the patterns of the bad load).  That makes no progress and just
     causes pointless cache pollution chasing the pointers.

 (b) we don't want to put the non-locking waiters always on the front of
     the queue, and the locking waiters always on the back.  Not only is
     that unfair, it means that we wake up thousands of reading threads
     that will just end up being blocked by the writer later anyway.

Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members.  It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.

Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.

It turns out that our 32-bit value for that limit was bogus.  On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong.  We used to
define that value to

	(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)

which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).

Neither of those limitations make sense.  The index is actually the full
32 bit unsigned value, and we can use that whole full page.  So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".

However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow.  So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.

So the actual limit is ULONG_MAX << PAGE_SHIFT.  That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.

The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume.  It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.

This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.

NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed.  But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.

So just use LLONG_MAX for the 64-bit case.  That was what the value had
been before too, just written out as a hex constant.

Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: NDoug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull input fixes from Dmitry Torokhov:

 - a tweak to the IBM Trackpoint driver that helps recognizing
   trackpoints on never Lenovo Carbons

 - a fix to the ALPS driver solving scroll issues on some Dells

 - yet another ACPI ID has been added to Elan I2C toucpad driver

 - quieted diagnostic message in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
  Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
  Input: trackpoint - add new trackpoint firmware ID
  Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310

Pull PCI fix from Bjorn Helgaas:
 "Remove needlessly alarming MSI affinity warning (this is not actually
  a bug fix, but the warning prompts unnecessary bug reports)"

* tag 'pci-v4.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULL

Pull x86 fixes from Ingo Molnar:
 "Two fixes: one for an ldt_struct handling bug and a cherry-picked
  objtool fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix use-after-free of ldt_struct
  objtool: Fix '-mtune=atom' decoding support in objtool 2.0

Pull timer fix from Ingo Molnar:
 "Fix a timer granularity handling race+bug, which would manifest itself
  by spuriously increasing timeouts of some timers (from 1 jiffy to ~500
  jiffies in the worst case measured) in certain nohz states"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Fix excessive granularity of new timers after a nohz idle

Pull perf fix from Ingo Molnar:
 "A single fix to not allow nonsensical event groups that result in
  kernel warnings"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix group {cpu,task} validation

Merge misc fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: reversed logic in memblock_discard()
  fork: fix incorrect fput of ->exe_file causing use-after-free
  mm/madvise.c: fix freeing of locked page with MADV_FREE
  dax: fix deadlock due to misaligned PMD faults
  mm, shmem: fix handling /sys/kernel/mm/transparent_hugepage/shmem_enabled
  PM/hibernate: touch NMI watchdog when creating snapshot

Pull Paolo Bonzini:
 "Bugfixes for x86, PPC and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce()
  KVM, pkeys: do not use PKRU value in vcpu->arch.guest_fpu.state
  KVM: x86: simplify handling of PKRU
  KVM: x86: block guest protection keys unless the host has them enabled
  KVM: PPC: Book3S HV: Add missing barriers to XIVE code and document them
  KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit loss
  KVM: PPC: Book3S HV: Use msgsync with hypervisor doorbells on POWER9
  KVM: s390: sthyi: fix specification exception detection
  KVM: s390: sthyi: fix sthyi inline assembly

Pull virtio fixes from Michael Tsirkin:
 "Fixes two obvious bugs in virtio pci"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: fix cpu affinity support
  virtio_blk: fix incorrect message when disk is resized

Pull powerpc fix from Michael Ellerman:
 "Just one fix, to add a barrier in the switch_mm() code to make sure
  the mm cpumask update is ordered vs the MMU starting to load
  translations. As far as we know no one's actually hit the bug, but
  that's just luck.

  Thanks to Benjamin Herrenschmidt, Nicholas Piggin"

* tag 'powerpc-4.13-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Ensure cpumask update is ordered

Pull nfsd fixes from Bruce Fields:
 "Two nfsd bugfixes, neither 4.13 regressions, but both potentially
  serious"

* tag 'nfsd-4.13-2' of git://linux-nfs.org/~bfields/linux:
  net: sunrpc: svcsock: fix NULL-pointer exception
  nfsd: Limit end of page list when decoding NFSv4 WRITE