It is DVB-S/S2 USB box.

* DNBU10512IST NIM
 * STV0903 demod
 * STV6110 tuner

* Intersil ISL6423 LNB controller
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is USB DVB-S/S2 box.

Conexant cx24116/cx24118 demod tuner combo
Intersil ISL6423 LNB controller
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is very rare I2C adapter hardware which can provide 32kB I2C write
as one write. Add .i2c_wr_max option to set desired max packet size.
Split transaction to smaller pieces according to that option.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently video capturing using streaming I/O method
doesn't work if capturing to overlay buffer took place
before.

When enabling the stream we have to check the overlay
enable driver flag and reset it so that the interrupt
handler won't execute the overlay interrupt path after
enabling DMA in streamon routine. Otherwise the capture
interrupt won't be handled correctly causing non working
VIDIOC_DQBUF ioctl.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently the driver enables overlay when running
VIDIOC_S_FMT ioctl with fmt type V4L2_BUF_TYPE_VIDEO_OVERLAY.
Actually, this is wrong. Add proper VIDIOC_OVERLAY support
instead of using VIDIOC_S_FMT for overlay enable.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

usb_altnum_to_altsetting() may return NULL. If it does we'll dereference a
NULL pointer in
drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c::pb0100_start().
As far as I can tell there's not really anything more sensible than
-ENODEV that we can return in that situation, but I'm not at all intimate
with this code so I'd like a bit of review/comments on this before it's
applied.
Anyway, here's a proposed patch.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Jean-Francois Moine <moinejf@free.fr>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Erik Andren <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Using ir_raw_event_store_with_filter() saves about 20 lines of code.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If an IR command is sent (using the LIRC userspace) to rc-loopback
which doesn't include a trailing space, the result is that the message
won't be completely decoded. In addition, "leftovers" from a previous
transmission can be left until the next one. Fix this by faking a long
silence after the end of TX data.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds preliminary IR TX capabilities to the
winbond-cir driver.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Using bool instead of an int helps readability a bit.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The MT9V032 is a parallel wide VGA sensor from Aptina (formerly Micron)
controlled through I2C.

The driver creates a V4L2 subdevice. It currently supports binning and
cropping, and the gain, auto gain, exposure, auto exposure and test
pattern controls.
Signed-off-by: NDetlev Casanova <detlev.casanova@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Bits 4 and 5 on register 02 should always be set to 1.

Opera1/Bsru6/z0194a/mantis_vp1033
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Acked-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Issues with Register 02 causing spurious channel locking from standby.
Should have always bits 4 & 5 written to 1.
Lower nibble not used in any current driver. Usage if necessary can be
applied through initab to mcr_reg. stv0299 not out of standby before
writing inittab.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Acked-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the core-assisted locking in fsl-viu driver and switch
to .unlocked_ioctl.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

users is always read or written with core->lock held.  A plain int is
simpler and faster.
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

mpeg_users is always read or written with core->lock held except
in mpeg_release (where it looks like a bug).  A plain int is simpler
and faster.
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It should not be possible to enter mpeg_open and acquire core->lock
without the blackbird driver being registered, so just error out if it
is not.  This makes the code more readable and should prevent the bug
fixed by the patch "hold device lock during sub-driver initialization"
from resurfacing again.

Similarly, if we enter mpeg_release and acquire core->lock then either
the blackbird driver is registered (since open files keep it loaded)
or the sysadmin forced the driver's removal.  In the latter case the
state will be inconsistent and this is worth a loud warning.
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add and use a mutex to protect the cx88-mpeg device list.  Previously
the BKL prevented races.

Based on work by Ben Hutchings <ben@decadent.org.uk>.
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

cx8802_blackbird_probe makes a device node for the mpeg sub-device
before it has been added to dev->drvlist.  If the device is opened
during that time, the open succeeds but request_acquire cannot be
called, so the reference count remains zero.  Later, when the device
is closed, the reference count becomes negative --- uh oh.

Close the race by holding core->lock during probe and not releasing
until the device is in drvlist and initialization finished.
Previously the BKL prevented this race.
Reported-by: NAndreas Huber <hobrom@gmx.at>
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Cc: stable@kernel.org
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The BKL conversion of this driver seems to have gone wrong.
Loading the cx88-blackbird driver deadlocks.

The cause: mpeg_ops::open in the cx2388x blackbird driver acquires the
device lock and calls the sub-driver's request_acquire, which tries to
acquire the lock again.  Fix it by clarifying the semantics of
request_acquire, request_release, advise_acquire, and advise_release:
now all will rely on the caller to acquire the device lock.

Based on work by Ben Hutchings <ben@decadent.org.uk>.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=31962Reported-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Cc: stable@kernel.org
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The BKL conversion of this driver seems to have gone wrong.  Various
uses of the sub-device and driver lists appear to be subject to race
conditions.

In particular, some functions access drvlist without a relevant lock
held, which will race against removal of drivers.  Let's start with
that --- clean up by consistently protecting dev->drvlist with
dev->core->lock, noting driver functions that require the device lock
to be held or not to be held.

After this patch, there are still some races --- e.g.,
cx8802_blackbird_remove can run between the time the blackbird driver
is acquired and the time it is used in mpeg_release, and there's a
similar race in cx88_dvb_bus_ctrl.  Later patches will address the
remaining known races and the deadlock noticed by Andi.  This patch
just makes the semantics clearer in preparation for those later
changes.

Based on work by Ben Hutchings <ben@decadent.org.uk>.
Tested-by: NAndi Huber <hobrom@gmx.at>
Tested-by: NMarlon de Boer <marlon@hyves.nl>
Cc: stable@kernel.org
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHIRANO Takahito <hiranotaka@zng.info>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Enabling force_testpattern module parameter in usbvision causes kernel panic.
Things like that does not belong to the kernel anyway so the fix is easy.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add Nogatech USB MicroCam PAL (NV3001P) and NTSC (NV3000N) support to
usbvision driver.
PAL version is tested, NTSC untested.
Data captured using usbsnoop, init_values are listed in the INF file along
with image dimensions, offsets and frame rates.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Improve PID filtering and program register 20 correctly.
 Make sure stream_on message is sent if streaming is off, otherwise
 PIDs are not registered.
 Move mutex outside lme2510_enable_pid.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

usb_buffer not inside mutex lock, waiting caller can alter buffer.
 Static added to lme2510_exit and lme2510_exit_int.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Gate could close after first I2C message. On stv0288 it does.
 Keep 2nd and 3rd message I2C gate control alive.
 Remove unnecessary gate closing in this module.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In drivers/media/dvb/siano/smsusb.c we have this code:
 ...
               kfree(dev);

               sms_info("device %p destroyed", dev);
 ...

at least one static analysis tool (Coverity Prevent) complains about this
as a use-after-free bug.
While it's true that we do use the pointer variable after freeing it, the
only use is to print the value of the pointer, so there's not actually any
problem here. But still, silencing the complaint is trivial by just moving
the kfree() call below the sms_info(), so why not just do it?. It doesn't
change the workings of the code in any way, but it makes the tool shut up.
The patch below also removes a rather pointless blank line.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On some situations, it is desired to use eeprom data to detect
the board type. This patch adds a logic for it and fixes 2 detection
issues:
	1) 10Moons UT-821 uses a generic Trident ID. Other boards
also share the same ID. So, better to use an alternative way for
it;
	2) Sometimes, HVR-900H is loaded with the default Trident
ID. This seems to be some hardware bug or race condition.

The new logic will only be enabled if the device is detected as
having a generic ID.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Return device errors to demuxer from on/off streamming and
 pid filtering.

Please test this patch with all dvb-usb devices.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are a couple of places where mutex_unlock() is called even
if mutex_lock_interruptible() failed. The patch fixes the issue.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[mchehab@redhat.com: avoided board renumberation, removed an unused #define
 and re-used the existing mb86a20s dvb attach code]
Signed-off-by: NMárcio A Alves <froooozen@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Avoid unnecessary DVB TS 188 sized packet copying from DMA buffer into stack.
Backtrack one 188 sized packet just after some garbage bytes when possible.
This obsoletes patch https://patchwork.kernel.org/patch/118147/Signed-off-by: NMarko Ristola <marko.ristola@kolumbus.fi>
Acked-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We leak the memory allocated to 'fw' (the firmware) when the variable goes
out of scope.
Fix the leak by calling release_firmware(fw) before 'fw' goes out of
scope.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If the second memory allocation in dib9000_attach() fails, we'll leak the
memory allocated by the first.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for mmap method streaming of raw YUV video on cx18-based
hardware, in addition to the existing support for read() streaming of
raw YUV and MPEG-2 encoded video.

[simon.farnsworth@onelan.co.uk: I forward-ported this from Steven's original work,
 done under contract to ONELAN. The original code is at
 http://www.kernellabs.com/hg/~stoth/cx18-videobuf]
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add CARDLIST
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adding jpeg enable module parameter.
Signed-off-by: NDean Anderson <linux-dev@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

adding MJPEG format
Signed-off-by: NDean Anderson <linux-dev@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>