- 06 8月, 2005 2 次提交
-
-
由 Mark Haverkamp 提交于
Received from Mark Salyzyn from Adaptec: If more than two commands are outstanding to the controller, there is no need to notify the adapter via a PCI bus transaction of additional commands added into the queue; it will get to them when it works through the produce/consumer indexes. This reduced the PCI traffic in the driver to submit a command to the queue to near zero allowing a significant number of commands to be turned around with no need to block for the PCI bridge to flush the notify request to the adapter. Interrupt mitigation has always been present in the driver; it was turned off because of a bug that prevented one from realizing the usefulness of the feature. This bug is fixed in this patch. Signed-off-by: NMark Haverkamp <markh@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
I ran into this one sending bus resets across the hardware. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 05 8月, 2005 2 次提交
-
-
由 James Bottomley 提交于
This patch upports all relevant code fixes and bumps the driver version to 7.0 to signify starting a new tree. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Hannes Reinecke 提交于
this patch is just a cross-port of the fixup for aic7xxx DT settings. As the same restrictions apply for aic79xx also (DT requires wide transfers) the dt setting routine should be modified equivalently. And an invalid period setting will be caught by ahd_find_syncrate() anyway. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 04 8月, 2005 6 次提交
-
-
由 James Bottomley 提交于
since this card can support the setting, add it to the parameter list. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
This parameter is important only to people who take the time to tune the margin control settings, otherwise it's completely irrelevant. However, just in case anyone should want to do this, it's appropriate to include the parameter. I don't do anything with it in DV by design, so the parameter will come up as off by default, so if anyone actually wants to play with the margin control settings they'll have to enable it under the spi_transport class first. I also updated the transfer settings display to report all of the PPR settings instead of only DT, IU and QAS Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
There's a slight problem in the way you've done the transport parameters; reading from the variables actually produces the current settings, not the ones you just set (and there's usually a lag because devices don't renegotiate until the next command goes over the bus). If you set the bit immediately, you get into the situation where the transport parameters report something as being set even if the drive cannot support it. I patched the driver to do it this way and also corrected a panic in the proc routines. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Hannes Reinecke 提交于
This patch updates various scsi_transport_spi parameters with the actual parameters used by the driver internally. Domain Validation for all devices should now work properly. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Hannes Reinecke 提交于
This patch updates the aic79xx driver to take advantage of the scsi_transport_spi infrastructure. Patch is quite a mess as some procedures have been reshuffled to be closer to the aic7xxx driver. Rejections fixed and Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Hannes Reinecke 提交于
From: Jeff Garzik <jgarzik@pobox.com> This patch removes the busyq in aic79xx and uses the command-queue from the midlayer instead. Additionally some dead code is removed. Signed-off-by: NHannes Reinecke <hare@suse.de> Fixed rejections Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 03 8月, 2005 9 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
we have the most recent microcode, make sure to always load it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
print message tidy ups and some excess brace removal. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NThiemo Seufer <ths@linux-mips.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 31 7月, 2005 4 次提交
-
-
由 James Bottomley 提交于
Fixes up some warnings in the tree. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Anderson 提交于
Add support to not allow additions to a host when it is being removed. Signed-off-by: NMike Anderson <andmike@us.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Anderson 提交于
Remove the old scsi_host_cancel function as it has not been working for sometime do to the device list possibly being empty when it is called and possible race issues. Add setting of SHOST_CANCEL at the state of beginning of scsi_remove_host. Signed-off-by: NMike Anderson <andmike@us.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Anderson 提交于
Migrate the current SCSI host state model to a model like SCSI device is using. Signed-off-by: NMike Anderson <andmike@us.ibm.com> Rejections fixed up and Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 30 7月, 2005 17 次提交
-
-
由 Adrian Bunk 提交于
It seems very unlikely that this driver will go into any stable kernel before devfs will be removed. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Olaf Hering 提交于
aic doesnt work anymore after this change which appeared int 2.6.13-rc1: [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft 2 files did not include byteorder.h, aic died with panic "Unknown opcode encountered in seq program" This patch fixes it for me. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Garrett 提交于
When leaving S3 state, the AGP bridge may not have all PCI configuration registers set in the same way as they were at boot. This should be fixed by pci_restore_state - however, the APBASE register cannot be set to conflict with the APSIZE register. If APSIZE is larger than it was before suspend, pci_restore_state will not restore APBASE correctly. The attached patch adds an extra item to the agp_bridge_data structure and uses it to store the value of APBASE. On resume, this is then written after APSIZE has been set. This patch only touches the path used for Intel chipsets without integrated graphics, and may need to be extended to work with the others. Without this patch, I get the symptoms described in bug 4921 - APBASE ends up overlapping various PCI devices, and as a result they fail to work after resume. Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerald Schaefer 提交于
Fix inline assembly that gets miscompiled by gcc 4. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Cornelia Huck 提交于
Close a small window where a device may be not operational again after senseid finished and the "same device" check fails due to dev=0000 by checking for dnv after stsch() by then setting the device to not operational. (No need to check for dnv in ccw_device_handle_oper() again since we don't do stsch() into the subchannel's schib in the meantime and will get a crw anyway if the device becomes not oper again). Signed-off-by: NCornelia Huck <cohuck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
The patch that introduced waiting for interrupts after resetting the reader can cause the boot to fail because the system is waiting for an interrupt that will never arrive. Add code to check if an interrupt is supposed to arrive before waiting endlessly. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Update default configuration of s390. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The #if/#ifdef cleanup exposed a bug in UML's ELF header processing. With this bug fixed, UML recognizes the vsyscall info coming from the host. On FC4, there is a vsyscall page low in the address space, which UML doesn't provide. This causes an infinite page fault loop and a hang on boot. This patch works around that by making this look like a no-vsyscall system. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Do not use memcpy in fb_pad_aligned_buffer. It is suboptimal because only a few bytes are moved at a time. Replace with a for-loop. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
The patch addresses a problem with ACPI SCI interrupt entry, which gets re-used, and the IRQ is assigned to another unrelated device. The patch corrects the code such that SCI IRQ is skipped and duplicate entry is avoided. Second issue came up with VIA chipset, the problem was caused by original patch assigning IRQs starting 16 and up. The VIA chipset uses 4-bit IRQ register for internal interrupt routing, and therefore cannot handle IRQ numbers assigned to its devices. The patch corrects this problem by allowing PCI IRQs below 16. Signed-off by: Natalie Protasevich <Natalie.Protasevich@unisys.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
>> vesafb: mode is 800x600x16, linelength=1600, pages=16 >> vesafb: scrolling: redraw >> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >> mtrr: type mismatch for fc000000,1000000 old: write-back new: write- >> combining Range is already set to write-back, vesafb attempts to add a write-combining mtrr (default for vesafb). >> mtrr: size and base must be multiples of 4 kiB This is a bug, vesafb attempts to add a size < PAGE_SIZE triggering the messages below. To eliminate the warning messages, you can add the option mtrr:2 to add a write-back mtrr for vesafb. Or just use nomtrr option. 1. Fix algorithm for finding the best power of 2 size with mtrr_add(). 2. Add option to choose the mtrr type by extending the mtrr boot option: mtrr:n where n 0 = no mtrr (equivalent to using the nomtrr option) 1 = uncachable 2 = write back 3 = write combining (default) 4 = write through Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bjorn Helgaas 提交于
Add support for UARTs in MMIO space and clean up a little whitespace. HP legacy-free ia64 machines need this. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
sync_tsc was using smp_call_function to ask the boot processor to report it's tsc value. smp_call_function performs an IPI_send_allbutself which is a broadcast ipi. There is a window during processor startup during which the target cpu has started and before it has initialized it's interrupt vectors so it can properly process an interrupt. Receveing an interrupt during that window will triple fault the cpu and do other nasty things. Why cli does not protect us from that is beyond me. The simple fix is to match ia64 and provide a smp_call_function_single. Which avoids the broadcast and is more efficient. This certainly fixes the problem of getting stuck on boot which was very easy to trigger on my SMP Hyperthreaded Xeon, and I think it fixes it for the right reasons. Minor changes by AK Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
While reserving KVA for lmem_maps of node, we have to make sure that node_remap_start_pfn[] is aligned to a proper pmd boundary. (node_remap_start_pfn[] gets its value from node_end_pfn[]) Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Pete Zaitcev 提交于
It seems that I see a bug in hidinput_hid_event. The check for NULL can never work, becaue &hidinput->input is nonzero at all times. Cc: <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dan Streetman 提交于
This patch does the same swap, i.e. use the ISO macro if (isoc). Additionally, it fixes the return value - the usb_calc_bus_time function returns the time in nanoseconds (I didn't notice that before) while the HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to return nanoseconds always, and adjusts ehci-q.c (the only high-speed caller of the function) to wrap the call in NS_TO_US(). Signed-off-by: NDan Streetman <ddstreet@ieee.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-