- 24 10月, 2010 40 次提交
-
-
由 Alexander Graf 提交于
We have a debug printk on every exit that is usually #ifdef'ed out. Using tracepoints makes a lot more sense here though, as they can be dynamically enabled. This patch converts the most commonly used debug printks of EXIT_DEBUG to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Takuya Yoshikawa 提交于
The following patch commit 57ce1659316f4ca298919649f9b1b55862ac3826 KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's ignored the fact that kvm_irq_delivery_to_apic() was also used by ia64. We define kvm_lapic_enabled() to fix a compile error caused by this. This will have the same effect as reverting the problematic patch for ia64. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The audit is very high overhead, so we need lower the frequency to assure the guest is running. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Both audit_mappings() and audit_sptes_have_rmaps() need to walk vcpu's page table, so we can do these checking in a spte walking Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Both audit_rmap() and audit_write_protection() need to walk all active sp, so we can do these checking in a sp walking Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Add a r/w module parameter named 'mmu_audit', it can control audit enable/disable: enable: echo 1 > /sys/module/kvm/parameters/mmu_audit disable: echo 0 > /sys/module/kvm/parameters/mmu_audit This patch not change the logic Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant on said old AMD CPU models. This change returns the expected value, which the Linux kernel is expecting to avoid writing back the MSR, plus it ignores all writes to the MSR. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
ICW is not a full reset, instead it resets a limited number of registers in the PIC. Change ICW1 emulation to only reset those registers. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
x86_emulate_insn() is full of things like if (rc != X86EMUL_CONTINUE) goto done; break; consolidate all of those at the end of the switch statement. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
These are all undefined. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
It is read/only; restoring it only results in annoying messages. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise EFER_LMA bit is retained across a SIPI reset. Fixes guest cpu onlining. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Since commit aad82703 no mmu reinitialization is performed via init_vmcb. Zero vcpu->arch.cr0 and pass the reset value as a parameter to kvm_set_cr0. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
out = write, in = read, not the other way round. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Nothing is checked in count_rmaps(), so remove it Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The audit code reports some sp not write protected in current code, it's just the bug in audit_write_protection(), since: - the invalid sp not need write protected - using uninitialize local variable('gfn') - call kvm_mmu_audit() out of mmu_lock's protection Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The read-only spte also has reverse mapping, so fix the code to check them, also modify the function name to fit its doing Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
fix: arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’: arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’: arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘set_spte’: arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’: arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’ Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jason Wang 提交于
Pit interrupt injection was done by workqueue, so no need to check pending pit timer in vcpu thread which could lead unnecessary unblocking of vcpu. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
When CONFIG_KVM_GUEST is selected, but CONFIG_KVM is not, we were missing some defines in asm-offsets.c and included too many headers at other places. This patch makes above configuration work. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The ALU opcode block is very regular; introduce D6ALU() to define decode flags for 6 instructions at a time. Suggested by Paolo Bonzini. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use do_div() instead. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Like DIV and IDIV. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Use the new byte/word dual opcode decode. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Many x86 instructions come in byte and word variants distinguished with bit 0 of the opcode. Add macros to aid in defining them. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
SrcMemFAddr is not defined with the modrm operand designating a register instead of a memory address. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
x86_emulate_insn() will return 1 if instruction can be restarted without re-entering a guest. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Wei Yongjun 提交于
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-