Based on an older patch from  Mike Kravetz <kravetz@us.ibm.com>

We need to have a mem_map for high addresses in order to make fops->no_page
work on spufs mem and register files.  So far, we have used the
memory_present() function during early bootup, but that did not work when
CONFIG_NUMA was enabled.

We now use the __add_pages() function to add the mem_map when loading the
spufs module, which is a lot nicer.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes two bugs with the way sparsemem interacts with memory add.
They are:

- memory leak if memmap for section already exists

- calling alloc_bootmem_node() after boot

These bugs were discovered and a first cut at the fixes were provided by
Arnd Bergmann <arnd@arndb.de> and Joel Schopp <jschopp@us.ibm.com>.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently loading the ioc3 as a module will cause the ports to be numbered
in reverse order.  This mod maintains the proper order of cards for port
numbering.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently we check PageDirty() in order to make the decision to swap out
the page.  However, the dirty information may be only be contained in the
ptes pointing to the page.  We need to first unmap the ptes before checking
for PageDirty().  If unmap is successful then the page count of the page
will also be decreased so that pageout() works properly.

This is a fix necessary for 2.6.17.  Without this fix we may migrate dirty
pages for filesystems without migration functions.  Filesystems may keep
pointers to dirty pages.  Migration of dirty pages can result in the
filesystem keeping pointers to freed pages.

Unmapping is currently not be separated out from removing all the
references to a page and moving the mapping.  Therefore try_to_unmap will
be called again in migrate_page() if the writeout is successful.  However,
it wont do anything since the ptes are already removed.

The coming updates to the page migration code will restructure the code
so that this is no longer necessary.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Blaisorblade's uml-makefile-nicer makes a V=0 build say SYMLINK where
what's happening is really a LINK.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Acked-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GCC hardened introduces additional symbol refererences (for the canary and
friends), also in modules - add weak export_symbols for them.  We already
tested that the weak declaration creates no problem on both GCC's providing
the function definition and on GCC's which don't provide it.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*) Rather than duplicate in various buggy ways the application of
   CFLAGS_NO_HARDENING and UNPROFILE (which apply to the same files),
   centralize it in Makefile.rules.  UNPROFILE_OBJS mustn't be listed in
   USER_OBJS but are compiled as such.

I've also verified that unprofile didn't work in the current form, because we
set _c_flags directly (using CFLAGS and not USER_CFLAGS, which is wrong),
which is normally used by c_flags, but we also override c_flags for all
USER_OBJS, and there we don't call unprofile.

Instead it only worked for unmap.o, the only one which wasn't a USER_OBJ.

We need to set c_flags (which is not a public Kbuild API) to clear a lot of
compilation flags like -nostdinc which Kbuild forces on everything.

*) Rather than $(CFLAGS_$(notdir $@)), which expands to CFLAGS_anObj.s when
   building "anObj.s", use $(CFLAGS_$(*F).o) which always accesses
   CFLAGS_anObj.o, like done by Kbuild.

*) Make c_flags apply to all targets having the same basename, rather than
   listing .s, .i, .lst and .o, with the use (which I tested) of

	$(USER_OBJS:.o=.%): c_flags = ...

and of

 -      $(obj)/unmap.c: _c_flags = ...
 +      $(obj)/unmap.%: _c_flags = ...
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To make some half-assembly stubs compile, disable various "hardened" GCC
features:

*) we can't make it build PIC code as we need %ebx to do syscalls and GCC
   wants it free for PIC

*) we can't leave stack protection as the stub is moved (not relocated!) in
   memory so the RIP-relative access to the canary tries reading from an
   unmapped address and causes a segfault, since we move the stub of various
   megabytes (the exact amount will be decided at runtime) away from the
   link-time address.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the build of user-offsets to arch/um/sys-$(SUBARCH), where it's located.
So we can also build it via Kbuild with its dependency tracking rather than by
hand.  While hacking here, fix also a lot of little cosmetic things.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Append /usr/lib/uml to the existing PATH environment variable to let execvp()
search uml_net in FHS compliant locations.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I sent a patch, it was applied as cda402b2,
then it was applied again as 181ae400 by
mistake.  But while the 1st time it modified (correctly) cow_header_v3, the
2nd it modified cow_header_v3_broken.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Blairsorblade noticed some confusion between our use of a system
call's return value and errno.  This patch fixes a number of related
bugs -
	using errno instead of a return value
	using a return value instead of errno
	forgetting to negate a error return to get a positive error code
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bring defconfig up to date.

Also disable CONFIG_BLK_DEV_UBD_SYNC by default.  By performing synchronous
I/O to the host, it slows things down, only protects against host crashes, and
can make a UML appear to hang while it waits for the host's disk.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The MADVISE_REMOVE-checking code didn't clean up after itself.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove redundant NULL checks before [kv]free + small CodingStyle cleanup for
arch/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A quick hack to allow skas0 mode to run on 2G/2G hosts.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to walk the region list properly.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Suppress the initcall-return-value warnings unless initcall_debug was
specified.

They do find bugs, but they're extremely small ones and as Andi points out,
people get distressed.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The apic= option can be used to set the APIC driver too.  When that is done
this code would always produce bogus warnings.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The 32bit version of e820_all_mapped() needs to use u64 to avoid overflows on
PAE systems.  Pointed out by Jan Beulich
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch I submitted earlier to fix disabled LAPIC handling in ACPI was
mismerged for some reason I still don't quite understand.  Parts of it was
applied to the wrong function.

This patch fixes it up.

Cc: <len.brown@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When retrying a failed BIO_RW_BARRIER request, we need to keep the reference
in ->nr_pending over the whole retry.  Currently, we only hold the reference
if the failed request is the *last* one to finish - which is silly, because it
would normally be the first to finish.

So move the rdev_dec_pending call up into the didn't-fail branch.  As the rdev
isn't used in the later code, calling rdev_dec_pending earlier doesn't hurt.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the test for 'do barrier work' down a bit so that if the first write to a
raid1 is a BIO_RW_BARRIER write, the checking done by superblock writes will
cause the right thing to happen.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Because that is what you get if a BIO_RW_BARRIER isn't supported!
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to hold a reference to rdevs while reading and writing to attempt to
correct read errors.  This reference must be taken under an rcu lock.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should add to the counter for the rdev *after* checking if the rdev is
NULL!!!
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NBastian Blank <bastian@waldi.eu.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Update version and reldate
  [TG3]: Fix bug in nvram write
  [TG3]: Add reset_phy parameter to chip reset functions
  [TG3]: Reset chip when changing MAC address
  [TG3]: Add phy workaround
  [TG3]: Call netif_carrier_off() during phy reset
  [IPV6]: Fix race in route selection.
  [XFRM]: fix incorrect xfrm_policy_afinfo_lock use
  [XFRM]: fix incorrect xfrm_state_afinfo_lock use
  [TCP]: Fix unlikely usage in tcp_transmit_skb()
  [XFRM]: fix softirq-unsafe xfrm typemap->lock use
  [IPSEC]: Fix IP ID selection
  [NET]: use hlist_unhashed()
  [IPV4]: inet_init() -> fs_initcall
  [NETLINK]: cleanup unused macro in net/netlink/af_netlink.c
  [PKT_SCHED] netem: fix loss
  [X25]: fix for spinlock recurse and spinlock lockup with timer handler

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Disable preemption during flush_tlb_pending().
  [SPARC64]: Kill __flush_tlb_page() prototype.

* git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: make EVIOCGSND return meaningful data
  Input: ressurect EVIOCGREP and EVIOCSREP
  Input: psmouse - fix new device detection logic
  Input: move input_device_id to mod_devicetable.h
  Input: allow using several chords for braille
  Input: allow passing NULL to input_free_device()
  Input: spitzkbd - fix the reversed Address and Calender keys
  Input: ads7846 - improve filtering for thumb press accuracy
  Input: ads7846 - report 0 pressure value along with pen up event
  Input: ads7846 - handle IRQs that were latched during disabled IRQs
  Input: ads7846 - miscellaneous fixes
  Input: ads7846 - use msleep() instead of udelay() in suspend
  Input: ads7846 - debouncing and rudimentary sample filtering
  Input: ads7846 - power down ADC a bit later
  Input: ads7846 - add pen_down sysfs attribute
  Input: wistron - add support for Fujitsu N3510
  Input: wistron - add signature for Amilo M7400

* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (22 commits)
  [ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips
  [ALSA] hda-codec - Add model entry for ASUS Z62F
  [ALSA] PCMCIA sound devices shouldn't depend on ISA
  [ALSA] hda-codec - Fix capture from line-in on VAIO SZ/FE laptops
  [ALSA] Fix Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n
  [ALSA] PCM core - introduce CONFIG_SND_PCM_XRUN_DEBUG
  [ALSA] adding __devinitdata to pci_device_id
  [ALSA] add __devinitdata to all pci_device_id
  [ALSA] hda-codec - Add codec id for AD1988B codec chip
  [ALSA] hda-codec - Add model entry for ASUS M9 laptop
  [ALSA] pcxhr - Fix a compiler warning on 64bit architectures
  [ALSA] via82xx: tweak VT8251 workaround
  [ALSA] intel8x0 - Disable ALI5455 SPDIF-input
  [ALSA] via82xx: add support for VIA VT8251 (AC'97)
  [ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txt
  [ALSA] Fix double free in error path of miro driver
  [ALSA] hda-codec - Add entry for Epox EP-5LDA+ GLi
  [ALSA] sound/pci/: remove duplicate #include's
  [ALSA] hda-codec - Use model 'hp' for all HP laptops with AD1981HD
  [ALSA] continue on IS_ERR from platform device registration
  ...

A context switch will force a call to flush_tlb_pending() (via
switch_to()), so if we test tlb_nr to be non-zero, then sleep, it
would become zero and later back at the original context we'll pass
zero down into the TLB flushing code which should never see a nr
argument of zero.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function no longer exists.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update version to 3.57.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix bug in nvram write function. If the starting nvram address offset
happens to be the last dword of the page, the NVRAM_CMD_LAST bit will
not get set in the existing code. This patch fixes the bug by changing
the "else if" to "if" so that the last dword condition always gets
checked.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With
the full chip reset during MAC address change, the automatic PHY reset
during chip reset will cause a link down and bonding will not work
properly as a result. With this reset_phy parameter, we can do a chip
reset without link down when changing MAC address or MTU.
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do the full chip reset when changing MAC address if ASF is enabled.

ASF sometimes uses a different MAC address than the driver. Without
the reset, the ASF MAC address may be overwritten when the driver's
MAC address is changed.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add some PHY workaround code to reduce jitter on some PHYs.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add netif_carrier_off() call during tg3_phy_reset(). This is needed
to properly track the netif_carrier state in cases where we do a
PHY reset with interrupts disabled. The SerDes code will not run
properly if the netif_carrier state is wrong.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>