SLAB_DEBUG_FREE allows expensive consistency checks at free to be turned
on or off.  Expand its use to be able to turn off all consistency
checks.  This gives a nice speed up if you only want features such as
poisoning or tracing.

Credit to Mathias Krause for the original work which inspired this
series
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 19c7ff9e ("slub: Take node lock during object free
checks") check_object has been incorrectly returning success as it
follows the out label which just returns the node.

Thanks to refactoring, the out and fail paths are now basically the
same.  Combine the two into one and just use a single label.

Credit to Mathias Krause for the original work which inspired this
series
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series takes the suggestion of Christoph Lameter and only focuses
on optimizing the slow path where the debug processing runs.  The two
main optimizations in this series are letting the consistency checks be
skipped and relaxing the cmpxchg restrictions when we are not doing
consistency checks.  With hackbench -g 20 -l 1000 averaged over 100
runs:

Before slub_debug=P
  mean 15.607
  variance .086
  stdev .294

After slub_debug=P
  mean 10.836
  variance .155
  stdev .394

This still isn't as fast as what is in grsecurity unfortunately so there's
still work to be done.  Profiling ___slab_alloc shows that 25-50% of time
is spent in deactivate_slab.  I haven't looked too closely to see if this
is something that can be optimized.  My plan for now is to focus on
getting all of this merged (if appropriate) before digging in to another
task.

This patch (of 4):

Currently, free_debug_processing has a comment "Keep node_lock to preserve
integrity until the object is actually freed".  In actuallity, the lock is
dropped immediately in __slab_free.  Rather than wait until __slab_free
and potentially throw off the unlikely marking, just drop the lock in
__slab_free.  This also lets free_debug_processing take its own copy of
the spinlock flags rather than trying to share the ones from __slab_free.
Since there is no use for the node afterwards, change the return type of
free_debug_processing to return an int like alloc_debug_processing.

Credit to Mathias Krause for the original work which inspired this series

[akpm@linux-foundation.org: fix build]
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current implementation of pfmemalloc handling in SLAB has some problems.

1) pfmemalloc_active is set to true when there is just one or more
   pfmemalloc slabs in the system, but it is cleared when there is no
   pfmemalloc slab in one arbitrary kmem_cache.  So, pfmemalloc_active
   could be wrongly cleared.

2) Search to partial and free list doesn't happen when non-pfmemalloc
   object are not found in cpu cache.  Instead, allocating new slab
   happens and it is not optimal.

3) Even after sk_memalloc_socks() is disabled, cpu cache would keep
   pfmemalloc objects tagged with SLAB_OBJ_PFMEMALLOC.  It isn't cleared
   if sk_memalloc_socks() is disabled so it could cause problem.

4) If cpu cache is filled with pfmemalloc objects, it would cause slow
   down non-pfmemalloc allocation.

To me, current pointer tagging approach looks complex and fragile so this
patch re-implement whole thing instead of fixing problems one by one.

Design principle for new implementation is that

1) Don't disrupt non-pfmemalloc allocation in fast path even if
   sk_memalloc_socks() is enabled.  It's more likely case than pfmemalloc
   allocation.

2) Ensure that pfmemalloc slab is used only for pfmemalloc allocation.

3) Don't consider performance of pfmemalloc allocation in memory
   deficiency state.

As a result, all pfmemalloc alloc/free in memory tight state will be
handled in slow-path.  If there is non-pfmemalloc free object, it will be
returned first even for pfmemalloc user in fast-path so that performance
of pfmemalloc user isn't affected in normal case and pfmemalloc objects
will be kept as long as possible.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Returing values by reference is bad practice.  Instead, just use
function return value.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Suggested-by: NChristoph Lameter <cl@linux.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SLAB needs an array to manage freed objects in a slab.  It is only used
if some objects are freed so we can use free object itself as this
array.  This requires additional branch in somewhat critical lock path
to check if it is first freed object or not but that's all we need.
Benefits is that we can save extra memory usage and reduce some
computational overhead by allocating a management array when new slab is
created.

Code change is rather complex than what we can expect from the idea, in
order to handle debugging feature efficiently.  If you want to see core
idea only, please remove '#if DEBUG' block in the patch.

Although this idea can apply to all caches whose size is larger than
management array size, it isn't applied to caches which have a
constructor.  If such cache's object is used for management array,
constructor should be called for it before that object is returned to
user.  I guess that overhead overwhelm benefit in that case so this idea
doesn't applied to them at least now.

For summary, from now on, slab management type is determined by
following logic.

1) if management array size is smaller than object size and no ctor, it
   becomes OBJFREELIST_SLAB.

2) if management array size is smaller than leftover, it becomes
   NORMAL_SLAB which uses leftover as a array.

3) if OFF_SLAB help to save memory than way 4), it becomes OFF_SLAB.
   It allocate a management array from the other cache so memory waste
   happens.

4) others become NORMAL_SLAB.  It uses dedicated internal memory in a
   slab as a management array so it causes memory waste.

In my system, without enabling CONFIG_DEBUG_SLAB, Almost caches become
OBJFREELIST_SLAB and NORMAL_SLAB (using leftover) which doesn't waste
memory.  Following is the result of number of caches with specific slab
management type.

TOTAL = OBJFREELIST + NORMAL(leftover) + NORMAL + OFF

/Before/
126 = 0 + 60 + 25 + 41

/After/
126 = 97 + 12 + 15 + 2

Result shows that number of caches that doesn't waste memory increase
from 60 to 109.

I did some benchmarking and it looks that benefit are more than loss.

Kmalloc: Repeatedly allocate then free test

/Before/
[    0.286809] 1. Kmalloc: Repeatedly allocate then free test
[    1.143674] 100000 times kmalloc(32) -> 116 cycles kfree -> 78 cycles
[    1.441726] 100000 times kmalloc(64) -> 121 cycles kfree -> 80 cycles
[    1.815734] 100000 times kmalloc(128) -> 168 cycles kfree -> 85 cycles
[    2.380709] 100000 times kmalloc(256) -> 287 cycles kfree -> 95 cycles
[    3.101153] 100000 times kmalloc(512) -> 370 cycles kfree -> 117 cycles
[    3.942432] 100000 times kmalloc(1024) -> 413 cycles kfree -> 156 cycles
[    5.227396] 100000 times kmalloc(2048) -> 622 cycles kfree -> 248 cycles
[    7.519793] 100000 times kmalloc(4096) -> 1102 cycles kfree -> 452 cycles

/After/
[    1.205313] 100000 times kmalloc(32) -> 117 cycles kfree -> 78 cycles
[    1.510526] 100000 times kmalloc(64) -> 124 cycles kfree -> 81 cycles
[    1.827382] 100000 times kmalloc(128) -> 130 cycles kfree -> 84 cycles
[    2.226073] 100000 times kmalloc(256) -> 177 cycles kfree -> 92 cycles
[    2.814747] 100000 times kmalloc(512) -> 286 cycles kfree -> 112 cycles
[    3.532952] 100000 times kmalloc(1024) -> 344 cycles kfree -> 141 cycles
[    4.608777] 100000 times kmalloc(2048) -> 519 cycles kfree -> 210 cycles
[    6.350105] 100000 times kmalloc(4096) -> 789 cycles kfree -> 391 cycles

In fact, I tested another idea implementing OBJFREELIST_SLAB with
extendable linked array through another freed object.  It can remove
memory waste completely but it causes more computational overhead in
critical lock path and it seems that overhead outweigh benefit.  So, this
patch doesn't include it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cache_init_objs() will be changed in following patch and current form
doesn't fit well for that change.  So, before doing it, this patch
separates debugging initialization.  This would cause two loop iteration
when debugging is enabled, but, this overhead seems too light than debug
feature itself so effect may not be visible.  This patch will greatly
simplify changes in cache_init_objs() in following patch.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab list should be fixed up after object is detached from the slab and
this happens at two places.  They do exactly same thing.  They will be
changed in the following patch, so, to reduce code duplication, this
patch factor out them and make it common function.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To become an off slab, there are some constraints to avoid bootstrapping
problem and recursive call.  This can be avoided differently by simply
checking that corresponding kmalloc cache is ready and it's not a off
slab.  It would be more robust because static size checking can be
affected by cache size change or architecture type but dynamic checking
isn't.

One check 'freelist_cache->size > cachep->size / 2' is added to check
benefit of choosing off slab, because, now, there is no size constraint
which ensures enough advantage when selecting off slab.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can fail to setup off slab in some conditions.  Even in this case,
debug pagealloc increases cache size to PAGE_SIZE in advance and it is
waste because debug pagealloc cannot work for it when it isn't the off
slab.  To improve this situation, this patch checks first that this
cache with increased size is suitable for off slab.  It actually
increases cache size when it is suitable for off-slab, so possible waste
is removed.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current cache type determination code is open-code and looks not
understandable.  Following patch will introduce one more cache type and
it would make code more complex.  So, before it happens, this patch
abstracts these codes.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Finding suitable OFF_SLAB candidate is more related to aligned cache
size rather than original size.  Same reasoning can be applied to the
debug pagealloc candidate.  So, this patch moves up alignment fixup to
proper position.  From that point, size is aligned so we can remove some
alignment fixups.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the freelist is at the front of slab page.  This requires
extra space to meet object alignment requirement.  If we put the
freelist at the end of a slab page, objects could start at page boundary
and will be at correct alignment.  This is possible because freelist has
no alignment constraint itself.

This gives us two benefits: It removes extra memory space for the
freelist alignment and remove complex calculation at cache
initialization step.  I can't think notable drawback here.

I mentioned that this would reduce extra memory space, but, this benefit
is rather theoretical because it can be applied to very few cases.
Following is the example cache type that can get benefit from this
change.

  size align num before after
    32    8  124  4100  4092
    64    8   63  4103  4095
    88    8   46  4102  4094
   272    8   15  4103  4095
   408    8   10  4098  4090
    32   16  124  4108  4092
    64   16   63  4111  4095
    32   32  124  4124  4092
    64   32   63  4127  4095
    96   32   42  4106  4074

before means whole size for objects and aligned freelist before applying
patch and after shows the result of this patch.

Since before is more than 4096, number of object should decrease and
memory waste happens.

Anyway, this patch removes complex calculation so looks beneficial to
me.

[akpm@linux-foundation.org: fix kerneldoc]
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, we don't use object status buffer in any setup. Remove it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DEBUG_SLAB_LEAK is a debug option.  It's current implementation requires
status buffer so we need more memory to use it.  And, it cause
kmem_cache initialization step more complex.

To remove this extra memory usage and to simplify initialization step,
this patch implement this feature with another way.

When user requests to get slab object owner information, it marks that
getting information is started.  And then, all free objects in caches
are flushed to corresponding slab page.  Now, we can distinguish all
freed object so we can know all allocated objects, too.  After
collecting slab object owner information on allocated objects, mark is
checked that there is no free during the processing.  If true, we can be
sure that our information is correct so information is returned to user.

Although this way is rather complex, it has two important benefits
mentioned above.  So, I think it is worth changing.

There is one drawback that it takes more time to get slab object owner
information but it is just a debug option so it doesn't matter at all.

To help review, this patch implements new way only.  Following patch
will remove useless code.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, open code for checking DEBUG_PAGEALLOC cache is spread to
some sites.  It makes code unreadable and hard to change.

This patch cleans up this code.  The following patch will change the
criteria for DEBUG_PAGEALLOC cache so this clean-up will help it, too.

[akpm@linux-foundation.org: fix build with CONFIG_DEBUG_PAGEALLOC=n]
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

debug_pagealloc debugging is related to SLAB_POISON flag rather than
FORCED_DEBUG option, although FORCED_DEBUG option will enable
SLAB_POISON.  Fix it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some of "#if DEBUG" are for reporting slab implementation bug rather
than user usecase bug.  It's not really needed because slab is stable
for a quite long time and it makes code too dirty.  This patch remove
it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is obsolete so remove it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset implements a new freed object management way, that is,
OBJFREELIST_SLAB.  Purpose of it is to reduce memory overhead in SLAB.

SLAB needs a array to manage freed objects in a slab.  If there is
leftover after objects are packed into a slab, we can use it as a
management array, and, in this case, there is no memory waste.  But, in
the other cases, we need to allocate extra memory for a management array
or utilize dedicated internal memory in a slab for it.  Both cases
causes memory waste so it's not good.

With this patchset, freed object itself can be used for a management
array.  So, memory waste could be reduced.  Detailed idea and numbers
are described in last patch's commit description.  Please refer it.

In fact, I tested another idea implementing OBJFREELIST_SLAB with
extendable linked array through another freed object.  It can remove
memory waste completely but it causes more computational overhead in
critical lock path and it seems that overhead outweigh benefit.  So,
this patchset doesn't include it.  I will attach prototype just for a
reference.

This patch (of 16):

We use freelist_idx_t type for free object management whose size would be
smaller than size of unsigned int.  Fix it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up trivial spelling errors, noticed while reading the code.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch introduce a new API call kfree_bulk() for bulk freeing memory
objects not bound to a single kmem_cache.

Christoph pointed out that it is possible to implement freeing of
objects, without knowing the kmem_cache pointer as that information is
available from the object's page->slab_cache.  Proposing to remove the
kmem_cache argument from the bulk free API.

Jesper demonstrated that these extra steps per object comes at a
performance cost.  It is only in the case CONFIG_MEMCG_KMEM is compiled
in and activated runtime that these steps are done anyhow.  The extra
cost is most visible for SLAB allocator, because the SLUB allocator does
the page lookup (virt_to_head_page()) anyhow.

Thus, the conclusion was to keep the kmem_cache free bulk API with a
kmem_cache pointer, but we can still implement a kfree_bulk() API fairly
easily.  Simply by handling if kmem_cache_free_bulk() gets called with a
kmem_cache NULL pointer.

This does increase the code size a bit, but implementing a separate
kfree_bulk() call would likely increase code size even more.

Below benchmarks cost of alloc+free (obj size 256 bytes) on CPU i7-4790K
@ 4.00GHz, no PREEMPT and CONFIG_MEMCG_KMEM=y.

Code size increase for SLAB:

 add/remove: 0/0 grow/shrink: 1/0 up/down: 74/0 (74)
 function                                     old     new   delta
 kmem_cache_free_bulk                         660     734     +74

SLAB fastpath: 87 cycles(tsc) 21.814
  sz - fallback             - kmem_cache_free_bulk - kfree_bulk
   1 - 103 cycles 25.878 ns -  41 cycles 10.498 ns - 81 cycles 20.312 ns
   2 -  94 cycles 23.673 ns -  26 cycles  6.682 ns - 42 cycles 10.649 ns
   3 -  92 cycles 23.181 ns -  21 cycles  5.325 ns - 39 cycles 9.950 ns
   4 -  90 cycles 22.727 ns -  18 cycles  4.673 ns - 26 cycles 6.693 ns
   8 -  89 cycles 22.270 ns -  14 cycles  3.664 ns - 23 cycles 5.835 ns
  16 -  88 cycles 22.038 ns -  14 cycles  3.503 ns - 22 cycles 5.543 ns
  30 -  89 cycles 22.284 ns -  13 cycles  3.310 ns - 20 cycles 5.197 ns
  32 -  88 cycles 22.249 ns -  13 cycles  3.420 ns - 20 cycles 5.166 ns
  34 -  88 cycles 22.224 ns -  14 cycles  3.643 ns - 20 cycles 5.170 ns
  48 -  88 cycles 22.088 ns -  14 cycles  3.507 ns - 20 cycles 5.203 ns
  64 -  88 cycles 22.063 ns -  13 cycles  3.428 ns - 20 cycles 5.152 ns
 128 -  89 cycles 22.483 ns -  15 cycles  3.891 ns - 23 cycles 5.885 ns
 158 -  89 cycles 22.381 ns -  15 cycles  3.779 ns - 22 cycles 5.548 ns
 250 -  91 cycles 22.798 ns -  16 cycles  4.152 ns - 23 cycles 5.967 ns

SLAB when enabling MEMCG_KMEM runtime:
 - kmemcg fastpath: 130 cycles(tsc) 32.684 ns (step:0)
 1 - 148 cycles 37.220 ns -  66 cycles 16.622 ns - 66 cycles 16.583 ns
 2 - 141 cycles 35.510 ns -  51 cycles 12.820 ns - 58 cycles 14.625 ns
 3 - 140 cycles 35.017 ns -  37 cycles 9.326 ns - 33 cycles 8.474 ns
 4 - 137 cycles 34.507 ns -  31 cycles 7.888 ns - 33 cycles 8.300 ns
 8 - 140 cycles 35.069 ns -  25 cycles 6.461 ns - 25 cycles 6.436 ns
 16 - 138 cycles 34.542 ns -  23 cycles 5.945 ns - 22 cycles 5.670 ns
 30 - 136 cycles 34.227 ns -  22 cycles 5.502 ns - 22 cycles 5.587 ns
 32 - 136 cycles 34.253 ns -  21 cycles 5.475 ns - 21 cycles 5.324 ns
 34 - 136 cycles 34.254 ns -  21 cycles 5.448 ns - 20 cycles 5.194 ns
 48 - 136 cycles 34.075 ns -  21 cycles 5.458 ns - 21 cycles 5.367 ns
 64 - 135 cycles 33.994 ns -  21 cycles 5.350 ns - 21 cycles 5.259 ns
 128 - 137 cycles 34.446 ns -  23 cycles 5.816 ns - 22 cycles 5.688 ns
 158 - 137 cycles 34.379 ns -  22 cycles 5.727 ns - 22 cycles 5.602 ns
 250 - 138 cycles 34.755 ns -  24 cycles 6.093 ns - 23 cycles 5.986 ns

Code size increase for SLUB:
 function                                     old     new   delta
 kmem_cache_free_bulk                         717     799     +82

SLUB benchmark:
 SLUB fastpath: 46 cycles(tsc) 11.691 ns (step:0)
  sz - fallback             - kmem_cache_free_bulk - kfree_bulk
   1 -  61 cycles 15.486 ns -  53 cycles 13.364 ns - 57 cycles 14.464 ns
   2 -  54 cycles 13.703 ns -  32 cycles  8.110 ns - 33 cycles 8.482 ns
   3 -  53 cycles 13.272 ns -  25 cycles  6.362 ns - 27 cycles 6.947 ns
   4 -  51 cycles 12.994 ns -  24 cycles  6.087 ns - 24 cycles 6.078 ns
   8 -  50 cycles 12.576 ns -  21 cycles  5.354 ns - 22 cycles 5.513 ns
  16 -  49 cycles 12.368 ns -  20 cycles  5.054 ns - 20 cycles 5.042 ns
  30 -  49 cycles 12.273 ns -  18 cycles  4.748 ns - 19 cycles 4.758 ns
  32 -  49 cycles 12.401 ns -  19 cycles  4.821 ns - 19 cycles 4.810 ns
  34 -  98 cycles 24.519 ns -  24 cycles  6.154 ns - 24 cycles 6.157 ns
  48 -  83 cycles 20.833 ns -  21 cycles  5.446 ns - 21 cycles 5.429 ns
  64 -  75 cycles 18.891 ns -  20 cycles  5.247 ns - 20 cycles 5.238 ns
 128 -  93 cycles 23.271 ns -  27 cycles  6.856 ns - 27 cycles 6.823 ns
 158 - 102 cycles 25.581 ns -  30 cycles  7.714 ns - 30 cycles 7.695 ns
 250 - 107 cycles 26.917 ns -  38 cycles  9.514 ns - 38 cycles 9.506 ns

SLUB when enabling MEMCG_KMEM runtime:
 - kmemcg fastpath: 71 cycles(tsc) 17.897 ns (step:0)
 1 - 85 cycles 21.484 ns -  78 cycles 19.569 ns - 75 cycles 18.938 ns
 2 - 81 cycles 20.363 ns -  45 cycles 11.258 ns - 44 cycles 11.076 ns
 3 - 78 cycles 19.709 ns -  33 cycles 8.354 ns - 32 cycles 8.044 ns
 4 - 77 cycles 19.430 ns -  28 cycles 7.216 ns - 28 cycles 7.003 ns
 8 - 101 cycles 25.288 ns -  23 cycles 5.849 ns - 23 cycles 5.787 ns
 16 - 76 cycles 19.148 ns -  20 cycles 5.162 ns - 20 cycles 5.081 ns
 30 - 76 cycles 19.067 ns -  19 cycles 4.868 ns - 19 cycles 4.821 ns
 32 - 76 cycles 19.052 ns -  19 cycles 4.857 ns - 19 cycles 4.815 ns
 34 - 121 cycles 30.291 ns -  25 cycles 6.333 ns - 25 cycles 6.268 ns
 48 - 108 cycles 27.111 ns -  21 cycles 5.498 ns - 21 cycles 5.458 ns
 64 - 100 cycles 25.164 ns -  20 cycles 5.242 ns - 20 cycles 5.229 ns
 128 - 155 cycles 38.976 ns -  27 cycles 6.886 ns - 27 cycles 6.892 ns
 158 - 132 cycles 33.034 ns -  30 cycles 7.711 ns - 30 cycles 7.728 ns
 250 - 130 cycles 32.612 ns -  38 cycles 9.560 ns - 38 cycles 9.549 ns
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch implements the free side of bulk API for the SLAB allocator
kmem_cache_free_bulk(), and concludes the implementation of optimized
bulk API for SLAB allocator.

Benchmarked[1] cost of alloc+free (obj size 256 bytes) on CPU i7-4790K @
4.00GHz, with no debug options, no PREEMPT and CONFIG_MEMCG_KMEM=y but
no active user of kmemcg.

SLAB single alloc+free cost: 87 cycles(tsc) 21.814 ns with this
optimized config.

bulk- Current fallback          - optimized SLAB bulk
  1 - 102 cycles(tsc) 25.747 ns - 41 cycles(tsc) 10.490 ns - improved 59.8%
  2 -  94 cycles(tsc) 23.546 ns - 26 cycles(tsc)  6.567 ns - improved 72.3%
  3 -  92 cycles(tsc) 23.127 ns - 20 cycles(tsc)  5.244 ns - improved 78.3%
  4 -  90 cycles(tsc) 22.663 ns - 18 cycles(tsc)  4.588 ns - improved 80.0%
  8 -  88 cycles(tsc) 22.242 ns - 14 cycles(tsc)  3.656 ns - improved 84.1%
 16 -  88 cycles(tsc) 22.010 ns - 13 cycles(tsc)  3.480 ns - improved 85.2%
 30 -  89 cycles(tsc) 22.305 ns - 13 cycles(tsc)  3.303 ns - improved 85.4%
 32 -  89 cycles(tsc) 22.277 ns - 13 cycles(tsc)  3.309 ns - improved 85.4%
 34 -  88 cycles(tsc) 22.246 ns - 13 cycles(tsc)  3.294 ns - improved 85.2%
 48 -  88 cycles(tsc) 22.121 ns - 13 cycles(tsc)  3.492 ns - improved 85.2%
 64 -  88 cycles(tsc) 22.052 ns - 13 cycles(tsc)  3.411 ns - improved 85.2%
128 -  89 cycles(tsc) 22.452 ns - 15 cycles(tsc)  3.841 ns - improved 83.1%
158 -  89 cycles(tsc) 22.403 ns - 14 cycles(tsc)  3.746 ns - improved 84.3%
250 -  91 cycles(tsc) 22.775 ns - 16 cycles(tsc)  4.111 ns - improved 82.4%

Notice it is not recommended to do very large bulk operation with
this bulk API, because local IRQs are disabled in this period.

[1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/mm/slab_bulk_test01.cSigned-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the call to cache_alloc_debugcheck_after() outside the IRQ disabled
section in kmem_cache_alloc_bulk().

When CONFIG_DEBUG_SLAB is disabled the compiler should remove this code.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch implements the alloc side of bulk API for the SLAB allocator.

Further optimization are still possible by changing the call to
__do_cache_alloc() into something that can return multiple objects.
This optimization is left for later, given end results already show in
the area of 80% speedup.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reviewers notice that the order in slab_post_alloc_hook() of
kmemcheck_slab_alloc() and kmemleak_alloc_recursive() gets swapped
compared to slab.c / SLAB allocator.

Also notice memset now occurs before calling kmemcheck_slab_alloc() and
kmemleak_alloc_recursive().

I assume this reordering of kmemcheck, kmemleak and memset is okay
because this is the order they are used by the SLUB allocator.

This patch completes the sharing of alloc_hook's between SLUB and SLAB.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the SLAB allocator kmemcheck_slab_alloc() is guarded against being
called in case the object is NULL.  In SLUB allocator this NULL pointer
invocation can happen, which seems like an oversight.

Move the NULL pointer check into kmemcheck code (kmemcheck_slab_alloc)
so the check gets moved out of the fastpath, when not compiled with
CONFIG_KMEMCHECK.

This is a step towards sharing post_alloc_hook between SLUB and SLAB,
because slab_post_alloc_hook() does not perform this check before
calling kmemcheck_slab_alloc().
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Deduplicate code in SLAB allocator functions slab_alloc() and
slab_alloc_node() by using the slab_pre_alloc_hook() call, which is now
shared between SLUB and SLAB.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the SLAB specific function slab_should_failslab(), by moving the
check against fault-injection for the bootstrap slab, into the shared
function should_failslab() (used by both SLAB and SLUB).

This is a step towards sharing alloc_hook's between SLUB and SLAB.

This bootstrap slab "kmem_cache" is used for allocating struct
kmem_cache objects to the allocator itself.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

First step towards sharing alloc_hook's between SLUB and SLAB
allocators.  Move the SLUB allocators *_alloc_hook to the common
mm/slab.h for internal slab definitions.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This change is primarily an attempt to make it easier to realize the
optimizations the compiler performs in-case CONFIG_MEMCG_KMEM is not
enabled.

Performance wise, even when CONFIG_MEMCG_KMEM is compiled in, the
overhead is zero.  This is because, as long as no process have enabled
kmem cgroups accounting, the assignment is replaced by asm-NOP
operations.  This is possible because memcg_kmem_enabled() uses a
static_key_false() construct.

It also helps readability as it avoid accessing the p[] array like:
p[size - 1] which "expose" that the array is processed backwards inside
helper function build_detached_freelist().

Lastly this also makes the code more robust, in error case like passing
NULL pointers in the array.  Which were previously handled before commit
03374518 ("slub: add missing kmem cgroup support to
kmem_cache_free_bulk").

Fixes: 03374518 ("slub: add missing kmem cgroup support to kmem_cache_free_bulk")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc-6.0 found an ancient bug in the paride driver, which had a
"module_param(verbose, bool, 0);" since before 2.6.12, but actually uses
it to accept '0', '1' or '2' as arguments:

  drivers/block/paride/pd.c: In function 'pd_init_dev_parms':
  drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare]
   #define DBMSG(msg) ((verbose>1)?(msg):NULL)

In 2012, Rusty did a cleanup patch that also changed the type of the
variable to 'bool', which introduced what is now a gcc warning.

This changes the type back to 'int' and adapts the module_param() line
instead, so it should work as documented in case anyone ever cares about
running the ancient driver with debugging.

Fixes: 90ab5ee9 ("module_param: make bool parameters really bool (drivers & misc)")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Rusty Russell <rusty@rustcorp.com.au>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch has been carried in the Android tree for quite some time and
is one of the few patches required to get a mainline kernel up and
running with an exsiting Android userspace.  So I wanted to submit it
for review and consideration if it should be merged.

For partitions, add new uevent parameters 'PARTN' which specifies the
partitions index in the table, and 'PARTNAME', which specifies PARTNAME
specifices the partition name of a partition device.

Android's userspace uses this for creating device node links from the
partition name and number, ie:

    /dev/block/platform/soc/by-name/system
or
    /dev/block/platform/soc/by-num/p1

One can see its usage here:
    https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355
and
    https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494

[john.stultz@linaro.org: dropped NPARTS and reworded commit message for context]
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <harald@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_send_join_cancels(), node is defined with type unsigned int, but
initialized with -1, this will lead variable overflow.  Although this
won't cause any runtime problem, the code looks a little uncoordinated.
Signed-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

when o2hb detect a node down, it first set the dead node to recovery map
and create ocfs2rec which will replay journal for dead node.  o2hb
thread then call dlm_do_local_recovery_cleanup() to delete the lock for
dead node.  After the lock of dead node is gone, locks for other nodes
can be granted and may modify the meta data without replaying journal of
the dead node.  The detail is described as follows.

     N1                         N2                   N3(master)
modify the extent tree of
inode, and commit
dirty metadata to journal,
then goes down.
                                                 o2hb thread detects
                                                 N1 goes down, set
                                                 recovery map and
                                                 delete the lock of N1.

                                                 dlm_thread flush ast
                                                 for the lock of N2.
                        do not detect the death
                        of N1, so recovery map is
                        empty.

                        read inode from disk
                        without replaying
                        the journal of N1 and
                        modify the extent tree
                        of the inode that N1
                        had modified.
                                                 ocfs2rec recover the
                                                 journal of N1.
                                                 The modification of N2
                                                 is lost.

The modification of N1 and N2 are not serial, and it will lead to
read-only file system.  We can set recovery_waiting flag to the lock
resource after delete the lock for dead node to prevent other node from
getting the lock before dlm recovery.  After dlm recovery, the recovery
map on N2 is not empty, ocfs2_inode_lock_full_nested() will wait for ocfs2
recovery.
Signed-off-by: NJiufei Xue <xuejiufei@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If master migrate this lock resource to node when it happened to purge
it, a new lock resource will be created and inserted into hash list.  If
then master goes down, the lock resource being purged is recovered, so
there exist two lock resource with different owner.  So return error to
master if the lock resource is in DROPPING state, master will retry to
migrate this lock resource.
Signed-off-by: Nxuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the master goes down after return in-progress for deref message.  The
lock resource on non-master node can not be purged.  Clear the
DROPPING_REF flag and recovery it.
Signed-off-by: Nxuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Master returns in-progress to non-master node when it can not clear the
refmap bit right now.  And non-master node will not purge the lock
resource until receiving deref done message.
Signed-off-by: Nxuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series of patches is to fix the dis-order issue of setting/clearing
refmap bit described below.

Node 1                               Node 2(master)
dlmlock
dlm_do_master_request
                                dlm_master_request_handler
                                -> dlm_lockres_set_refmap_bit
dlmlock succeed
dlmunlock succeed

dlm_purge_lockres
                                dlm_deref_handler
                                -> find lock resource is in
                                   DLM_LOCK_RES_SETREF_INPROG state,
                                   so dispatch a deref work
dlm_purge_lockres succeed.

call dlmlock again
dlm_do_master_request
                                dlm_master_request_handler
                                -> dlm_lockres_set_refmap_bit

                                deref work trigger, call
                                dlm_lockres_clear_refmap_bit
                                to clear Node 1 from refmap

                                dlm_purge_lockres succeed

dlm_send_remote_lock_request
                                return DLM_IVLOCKID because
                                the lockres is not exist
BUG if the lockres is $RECOVERY

This series of patches add a new message to keep the order of set and
clear.  Other nodes can purge the lock resource only after the refmap bit
on master is cleared.

This patch is to add DEREF_DONE message and corresponding handler.  Node
can purge the lock resource after receiving this message.  As a new
message is added, so increase the minor number of dlm protocol version.
Signed-off-by: Nxuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>