Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Optimise attribute revalidation when hardlinking. Add post-op attributes
 for the directory and the original inode.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 "Optional" means that the close call will not fail if the getattr
 at the end of the compound fails.
 If it does succeed, try to refresh inode attributes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Only force a getattr in nfs_file_flush() if the attribute
 cache is stale.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Since the directory attributes change every time we CREATE a file,
 we might as well pick up the new directory attributes in the same
 compound.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 nfs_lookup() used to consult a lookup cache before trying an actual wire
 lookup operation.  The lookup cache would be invalid, of course, if the
 parent directory's mtime had changed, so nfs_lookup performed an inode
 revalidation on the parent.

 Since nfs_lookup() doesn't use a cache anymore, the revalidation is no
 longer necessary.  There are cases where it will generate a lot of
 unnecessary GETATTR traffic.

 See http://bugzilla.linux-nfs.org/show_bug.cgi?id=9

 Test-plan:
 Use lndir and "rm -rf" and watch for excess GETATTR traffic or application
 level errors.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Since we almost always call nfs_end_data_update() after we called
 nfs_refresh_inode(), we now end up marking the inode metadata
 as needing revalidation immediately after having updated it.

 This patch rearranges things so that we mark the inode as needing
 revalidation _before_ we call nfs_refresh_inode() on those operations
 that need it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Allow nfs_refresh_inode() also to update attributes on the inode if the
 RPC call was sent after the last call to nfs_update_inode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This reverts 747c5534 commit.

This just makes sure that a thread's expiry times can't get reset after
it clears them in do_exit.

This is what allowed us to re-introduce the stricter BUG_ON() check in
a362f463.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit 3de463c7.

Roland has another patch that allows us to leave the BUG_ON() in place
by just making sure that the condition it tests for really is always
true.

That goes in next.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a silly off-by-one error in the code that updates the expiration
of posix CPU timers, causing them to not be properly updated when they
hit exactly on their expiration time (which should be the normal case).

This causes them to then fire immediately again, and only _then_ get
properly updated.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pointed out by Oleg Nesterov, who has been walking over the code
forwards and backwards.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've seen similar failure on alpha.

Obviously, someone forgot to convert sg->handle stuff for
PCI gart case.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert nanoseconds to microseconds correctly.

Spotted by Steve Dickson <SteveD@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fsck_hfs reveals lots of temporary files accumulating in the hidden
directory "\000\000\000HFS+ Private Data".  According to the HFS+
documentation these are files which are unlinked while in use.  However,
there may be a bug in the Linux hfsplus implementation which causes this to
happen even when the files are not in use.  It looks like the "opencnt"
field is never initialized as (I think) it should be in hfsplus_read_inode.
 This means that a file can appear to be still in use when in fact it has
been closed.  This patch seems to fix it for me.
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Although this message is having the intended effect of causing wireless
driver maintainers to upgrade their code, I never should have merged this
patch in its present form.  Leading to tons of bug reports and unhappy
users.

Some wireless apps poll for statistics regularly, which leads to a printk()
every single time they ask for stats.  That's a little bit _too_ much of a
reminder that the driver is using an old API.

Change this to printing out the message once, per kernel boot.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_SMP=n:

*** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined!

due to set_cpus_allowed().
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The mpic interrupt controller driver (used on G5 and early pSeries among
others) has a bug where it doesn't get the right virtual address for the
timer registers.  It causes the driver to poke at the MMIO space of
whatever has been mapped just next to it (ouch !) when initializing and
causes boot failures on some IBM machines.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never
cleared today.  This works ok for CPU 0 on NUMA machines because
boot_pageset[] is already zero, but for other CPU:s this results in
uninitialized counters.
Signed-off-by: NMagnus Damm <magnus@valinux.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are still a couple of cases where md threads (the resync/recovery
thread) is not interruptible since the change to use kthreads.  All places
there it tests "signal_pending", it should also test kthread_should_stop,
as with this patch.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Ian Campbell

Sparse complains about the definition of generic_fls in asm-arm/bitops.h:
  CHECK   /home/icampbell/devel/kernel/2.6/arch/arm/mach-pxa/viper.c
include2/asm/bitops.h:350:34: error: marked inline, but without a definition

The definition is unnecessary since linux/bitops.h defines generic_fls before including asm/bitops.h and asm/bitops.h should not be included directly. There are still some places where asm/bitops.h is directly included, but I think that code should be fixed. I was a little wary of the patch for this reason but lubbock, mainstone and assabet all build OK and so do my in house boards...

ARM is the only arch with the generic_fls prototype in this way.
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When reserving an PCI quirk, note that in the kernel bootup messages.

Also, parse the strange PIIX4 device resources - they should get their
own PCI resource quirks, but for now just print out what it finds to
verify that the code does the right thing.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NYan Zheng <yanzheng@21cn.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call
qla2x00_free_device() to clean up.  But because ha->dpc_pid hasn't been set
yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started
yet.  It does wait_for_completion() against an uninitialised completion struct
and the kernel hangs up.

Fix it by initialising ha->dpc_pid a bit earlier.

Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My alpha build is exploding because asm/atomic.h now needs smb_mb(), which is
over in the (not included) system.h.

I fear what will happen if I include system.h into atomic.h, so let's put the
barriers into their own header file.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes compile problem when CONFIG_FB_PXA is not set.

  LD      .tmp_vmlinux1
arch/arm/mach-pxa/built-in.o(.text+0x1d74): In function
`spitz_get_hsync_len':
: undefined reference to `pxafb_get_hsync_time'
make: *** [.tmp_vmlinux1] Error 1
3.46user 0.46system 5.10 (0m5.106s) elapsed 77.01%CPU
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>