Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 18 9月, 2012 2 次提交
  3. 11 9月, 2012 1 次提交
    • I
      perf tools: Use __maybe_used for unused variables · 1d037ca1
      由 Irina Tirdea 提交于 
      perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05d in builtin-sched.c ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d037ca1
  5. 06 9月, 2012 1 次提交
  7. 15 8月, 2012 3 次提交
    • A
      perf evlist: Introduce evsel list accessors · 0c21f736
      由 Arnaldo Carvalho de Melo 提交于 
      To replace the longer list_entry constructs for things that are widely
used:

	perf_evlist__{first,last}(evlist)
	perf_evsel__next(evsel)
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0c21f736
    • A
      perf evlist: Rename __group method to __set_leader · 63dab225
      由 Arnaldo Carvalho de Melo 提交于 
      Just like was done for parse_events__set_leader.

Also we need to have the list_entry set_leader method in evlist.c so that we
don't grow another dep in the python binding:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader

And also remove a pr_debug from evsel.c so that we avoid this one too:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      63dab225
    • J
      perf tools: Enable grouping logic for parsed events · 6a4bb04c
      由 Jiri Olsa 提交于 
      This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.

The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.

With the new '{}' group syntax you can create group like:
  # perf record -e '{cycles,faults}' ls

resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.

All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.

Examples (first event in brackets is group leader):

  # 1 group (cpu-clock,task-clock)
  perf record --group -e cpu-clock,task-clock ls
  perf record -e '{cpu-clock,task-clock}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls

  # 1 group (cpu-clock,task-clock,minor-faults,major-faults)
  perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
  perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
   -e instructions ls

  # 1 group
  # (cpu-clock,task-clock,minor-faults,major-faults,instructions)
  perf record --group -e cpu-clock,task-clock \
   -e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls

It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:

  # perf record -r '{faults:k,cache-references}:p'

resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6a4bb04c
  9. 20 6月, 2012 1 次提交
  11. 11 6月, 2012 1 次提交
    • S
      perf stat: Fix default output file · fc3e4d07
      由 Stephane Eranian 提交于 
      The following commit:

commit 56f3bae7
Author: Jim Cromie <jim.cromie@gmail.com>
Date:   Wed Sep 7 17:14:00 2011 -0600

    perf stat: Add --log-fd <N> option to redirect stderr elsewhere

introduced a bug in the way perf stat outputs the results by default,
i.e., without the --log-fd or --output option. It would default to
writing to file descriptor 0, i.e., stdin. Writing to stdin is allowed
and is equivalent to writing to stdout. However, there is a major
difference for any script that was already capturing the output of perf
stat via redirection:

    perf stat >/tmp/log .... or perf stat 2>/tmp/log ....

They would not capture anything anymore. They would have to do:
    perf stat 0>/tmp/log ...

This breaks compatibility with existing scripts and does not look very
natural.

This patch fixes the problem by looking at output_fd only when it was
modified by user (> 0). It also checks that the value if positive.
Passing --log-fd 0 is ignored.

I would also argue that defaulting to stderr for the results is not the
right thing to do, though this patch does not address this specific
issue.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Link: http://lkml.kernel.org/r/20120515111111.GA9870@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fc3e4d07
  13. 31 5月, 2012 1 次提交
    • A
      perf stat: Initialize default events wrt exclude_{guest,host} · 79695e1b
      由 Arnaldo Carvalho de Melo 提交于 
      When no event is specified the tools use perf_evlist__add_default(), that will
call event_attr_init to initialize the KVM exclusion bits.

When the change was made to the tools so that by default guest samples would be
excluded, the changes were made just to the parsing routines and to
perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far
just by perf stat to add multiple events, according to the level of detail
specified.

Recently the tools were changed to reconstruct the event name from all the
details in perf_event_attr, not just from .type and .config, but taking into
account all the feature bits (.exclude_{guest,host,user,kernel,etc},
.precise_ip, etc).

That is when we noticed that the default for perf stat wasn't the one for the
rest of the tools, i.e. the .exclude_guest bit wasn't being set.

I.e. the default, that doesn't call event_attr_init was showing the :HG
modifier:

  $ perf stat usleep 1

   Performance counter stats for 'usleep 1':

            0.942119 task-clock                #    0.454 CPUs utilized
                   1 context-switches          #    0.001 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 126 page-faults               #    0.134 M/sec
             693,193 cycles:HG                 #    0.736 GHz                     [40.11%]
             407,461 stalled-cycles-frontend:HG #   58.78% frontend cycles idle    [72.29%]
             365,403 stalled-cycles-backend:HG #   52.71% backend  cycles idle
             465,982 instructions:HG           #    0.67  insns per cycle
                                               #    0.87  stalled cycles per insn
              89,760 branches:HG               #   95.275 M/sec
               6,178 branch-misses:HG          #    6.88% of all branches

         0.002077228 seconds time elapsed

While if one explicitely specifies the same events, which will make the parsing code
to be called and thus event_attr_init is called:

  $ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1

   Performance counter stats for 'usleep 1':

            1.040349 task-clock                #    0.500 CPUs utilized
                   2 context-switches          #    0.002 M/sec
                   0 CPU-migrations            #    0.000 K/sec
                 127 page-faults               #    0.122 M/sec
             587,966 cycles                    #    0.565 GHz                     [13.18%]
             459,167 stalled-cycles-frontend   #   78.09% frontend cycles idle
             390,249 stalled-cycles-backend    #   66.37% backend  cycles idle
             504,006 instructions              #    0.86  insns per cycle
                                               #    0.91  stalled cycles per insn
              96,455 branches                  #   92.714 M/sec
               6,522 branch-misses             #    6.76% of all branches         [96.12%]

         0.002078681 seconds time elapsed

Fix it by introducing a perf_evlist__add_default_attrs method that will call
evlist_attr_init in all the perf_event_attr entries before adding the events.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      79695e1b
  15. 16 5月, 2012 1 次提交
  17. 10 5月, 2012 1 次提交
    • D
      perf stat: handle ENXIO error for perf_event_open · 20d23aaa
      由 David Ahern 提交于 
      perf stat on PPC currently fails to run:

$ perf stat -- sleep 1
  Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

The problem is that until 2.6.37 (behavior changed with commit b0a873eb)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.

...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      20d23aaa
  19. 09 5月, 2012 1 次提交
    • D
      perf stat: handle ENXIO error for perf_event_open · 979987a5
      由 David Ahern 提交于 
      perf stat on PPC currently fails to run:

$ perf stat -- sleep 1
  Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

The problem is that until 2.6.37 (behavior changed with commit b0a873eb)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.

...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      979987a5
  21. 08 5月, 2012 2 次提交
  23. 03 5月, 2012 2 次提交
  25. 02 5月, 2012 1 次提交
    • S
      perf stat: Fix case where guest/host monitoring is not supported by kernel · 5622c07b
      由 Stephane Eranian 提交于 
      By default, perf stat sets exclude_guest = 1. But when you run perf on a
kernel which does not support  host/guest filtering, then you get an
error saying the event in unsupported. This comes from the fact that
when the perf_event_attr struct passed by the user is larger than the
one known to the kernel there is safety check which ensures that all
unknown bits are zero. But here, exclude_guest is 1 (part of the unknown
bits) and thus the perf_event_open() syscall return EINVAL.

To my surprise, running perf record on the same kernel did not exhibit
the problem. The reason is that perf record handles the problem by
catching the error and retrying with guest/host excludes set to zero.
For some reason, this was not done with perf stat. This patch fixes this
problem.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/20120427124538.GA7230@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5622c07b
  27. 12 4月, 2012 1 次提交
  29. 17 3月, 2012 1 次提交
    • N
      perf stat: Fix event grouping on forked task · 4c19ea45
      由 Namhyung Kim 提交于 
      When event group is enabled for forked task (i.e. no target task was
specified) all events were disabled and marked ->enable_on_exec.
However they are not counted at all since only group leader will be
enabled on exec actually. So the result looked like below:

 $ ./perf stat --group -- sleep 1

 Performance counter stats for 'sleep 1':

          0.554926 task-clock                #    0.001 CPUs utilized
     <not counted> context-switches
     <not counted> CPU-migrations
     <not counted> page-faults
     <not counted> cycles
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
     <not counted> instructions
     <not counted> branches
     <not counted> branch-misses

       1.001228093 seconds time elapsed

Fix it by disabling group leader only.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887340-32448-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4c19ea45
  31. 14 2月, 2012 1 次提交
  33. 07 2月, 2012 2 次提交
  35. 25 1月, 2012 1 次提交
  37. 04 1月, 2012 1 次提交
  39. 06 12月, 2011 1 次提交
    • A
      perf stat: Failure with "Operation not supported" · 38f6ae1e
      由 Anton Blanchard 提交于 
      perf stat is failing on PowerPC:

  Error: open_counter returned with 95 (Operation not supported). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

commit 370faf1d (perf stat: Fail softly on unsupported events)
added a check for failure returning ENOENT, but the POWER backend
returns EOPNOTSUPP. It looks like alpha, blackfin and mips do the
same.

With the patch applied, things work as expected:

 Performance counter stats for '/bin/true':

          0.362176 task-clock                #    0.623 CPUs utilized
                 0 context-switches          #    0.000 M/sec
                 0 CPU-migrations            #    0.000 M/sec
                28 page-faults               #    0.077 M/sec
         1,677,020 cycles                    #    4.630 GHz
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
           431,220 instructions              #    0.26  insns per cycle
           101,889 branches                  #  281.325 M/sec
             4,145 branch-misses             #    4.07% of all branches

       0.000581361 seconds time elapsed

Cc: <stable@kernel.org> # 3.0+
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111202093833.5fef7226@krytenSigned-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      38f6ae1e
  41. 29 11月, 2011 1 次提交
  43. 28 11月, 2011 1 次提交
  45. 26 10月, 2011 1 次提交
  47. 30 9月, 2011 6 次提交
  49. 18 8月, 2011 2 次提交
  51. 21 7月, 2011 1 次提交
  53. 01 7月, 2011 1 次提交
    • Z
      perf stat: Add noise output for csv mode · 3ae9a34d
      由 Zhengyu He 提交于 
      Previously, when you want perf-stat to output the statistics in
csv mode, no information of the noise will be printed out.

For example right now we output this --repeat information:

 ./perf stat -r3 -x, sleep 1
 1.164789,task-clock
 8,context-switches
 0,CPU-migrations
 219,page-faults
 3337800,cycles

With this patch, the output will be appended with an additional
entry for the noise value:

 ./perf stat -r3 -x, sleep 1
 1.164789,task-clock,3.75%
 8,context-switches,75.00%
 0,CPU-migrations,100.00%
 219,page-faults,0.00%
 3337800,cycles,3.36%
Signed-off-by: NZhengyu He <zhengyuh@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1308861942-4945-1-git-send-email-zhengyuh@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      3ae9a34d
  55. 03 6月, 2011 1 次提交
    • D
      perf stat: clarify unsupported events from uncounted events · 2cee77c4
      由 David Ahern 提交于 
      perf stat continues running even if the event list contains counters
that are not supported. The resulting output then contains <not counted>
for those events which gets confusing as to which events are supported,
but not counted and which are not supported.

Before:

perf stat -ddd -- sleep 1

      Performance counter stats for 'sleep 1':

          0.571283 task-clock                #    0.001 CPUs utilized
                 1 context-switches          #    0.002 M/sec
                 0 CPU-migrations            #    0.000 M/sec
               157 page-faults               #    0.275 M/sec
         1,037,707 cycles                    #    1.816 GHz
     <not counted> stalled-cycles-frontend
     <not counted> stalled-cycles-backend
           654,499 instructions              #    0.63  insns per cycle
           136,129 branches                  #  238.286 M/sec
     <not counted> branch-misses
     <not counted> L1-dcache-loads
     <not counted> L1-dcache-load-misses
     <not counted> LLC-loads
     <not counted> LLC-load-misses
     <not counted> L1-icache-loads
     <not counted> L1-icache-load-misses
     <not counted> dTLB-loads
     <not counted> dTLB-load-misses
     <not counted> iTLB-loads
     <not counted> iTLB-load-misses
     <not counted> L1-dcache-prefetches
     <not counted> L1-dcache-prefetch-misses

       1.001004836 seconds time elapsed

After:

perf stat -ddd -- sleep 1

 Performance counter stats for 'sleep 1':

          1.350326 task-clock                #    0.001 CPUs utilized
                 2 context-switches          #    0.001 M/sec
                 0 CPU-migrations            #    0.000 M/sec
               157 page-faults               #    0.116 M/sec
            11,986 cycles                    #    0.009 GHz
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
           496,986 instructions              #   41.46  insns per cycle
           138,065 branches                  #  102.246 M/sec
             7,245 branch-misses             #    5.25% of all branches
     <not counted> L1-dcache-loads
     <not counted> L1-dcache-load-misses
     <not counted> LLC-loads
     <not counted> LLC-load-misses
     <not counted> L1-icache-loads
     <not counted> L1-icache-load-misses
     <not counted> dTLB-loads
     <not counted> dTLB-load-misses
     <not counted> iTLB-loads
     <not counted> iTLB-load-misses
     <not counted> L1-dcache-prefetches
   <not supported> L1-dcache-prefetch-misses

       1.002397333 seconds time elapsed

v1->v2:
changed supported type from int to bool

v2->v3
fixed vertical alignment of new struct element

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306767359-13221-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2cee77c4