Signed-off-by: NAndi Kleen <ak@suse.de>

This unifies the standard backtracer and the new stacktrace
in memory backtracer. The standard one is converted to use callbacks
and then reimplement stacktrace using new callbacks.

The main advantage is that stacktrace can now use the new dwarf2 unwinder
and avoid false positives in many cases.

I kept it simple to make sure the standard backtracer stays reliable.

Cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

Needed for use of the unwinder in lockdep, because lockdep runs really
early too.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Lockdep can call the dwarf2 unwinder early, and the dwarf2 code
uses safe_smp_processor_id which tries to access the local APIC page.
But that doesn't work before the APIC code has set up its fixmap.

Check for this case and always return boot cpu then.

Cc: jbeulich@novell.com
Cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

The new dwarf2 unwinder needs to take locks to do backtraces
inside modules. This patch makes sure lockdep which calls
stacktrace is not reentered.

Thanks to Ingo for suggesting this simpler approach.

Cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

- Remove unused all_contexts parameter
No caller used it
- Move skip argument into the structure (needed for
followon patches)

Cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

tce_cache_blast_stress was useful during bringup to stress the IOMMU's
cache flushing. Now that we quiesce DMAs on every cache flush, using
_stress() brings the machine down to its knees once you put it under
load. Remove this debug / bringup code that isn't useful anymore
completely.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Introduce new function verify_bit_range(). Define two versions, one
for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we
were checking that the bitmap was consistent every time we allocated
or freed an entry in the TCE table, which is good for debugging but
incurs an unnecessary penalty on non debug builds.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

is_at_popf() needs to test for the iret instruction as well as
popf.  So add that test and rename it to is_setting_trap_flag().

Also change max insn length from 16 to 15 to match reality.

LAHF / SAHF can't affect TF, so the comment in x86_64 is removed.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

And move one into proto.h

Cc: len.brown@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>

The combination of "local_save_flags" and "local_irq_disable" seems to be
equivalent to "local_irq_save" (see code snips below). Consequently, replace
occurrences of local_save_flags+local_irq_disable with local_irq_save.

* local_irq_save
#define raw_local_irq_save(flags) \
                do { (flags) = __raw_local_irq_save(); } while (0)

static inline unsigned long __raw_local_irq_save(void)
{
        unsigned long flags = __raw_local_save_flags();

        raw_local_irq_disable();

        return flags;
}

* local_save_flags
#define raw_local_save_flags(flags) \
                do { (flags) = __raw_local_save_flags(); } while (0)
Signed-off-by: NFernando Vazquez <fernando@intellilink.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Mostly by adding casts.

I didn't touch the "invalid access past ..." which are caused
by the sigset conversion.
Signed-off-by: NAndi Kleen <ak@suse.de>

Fixes

linux/arch/x86_64/mm/fault.c:125:7: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:125:7:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:125:7:    got unsigned char *[assigned] instr
linux/arch/x86_64/mm/fault.c:163:8: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:163:8:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:163:8:    got unsigned char *[assigned] instr
linux/arch/x86_64/mm/fault.c:179:9: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/mm/fault.c:179:9:    expected void [noderef] *<noident><asn:1>
linux/arch/x86_64/mm/fault.c:179:9:    got unsigned long *<noident>
Signed-off-by: NAndi Kleen <ak@suse.de>

Fixes

linux/arch/x86_64/kernel/vsyscall.c:276:7: warning: constant 0x0f40000000000 is so big it is long
linux/arch/x86_64/kernel/vsyscall.c:80:14: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:80:14:    expected void const volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:80:14:    got void *<noident>
linux/arch/x86_64/kernel/vsyscall.c:200:7: warning: incorrect type in assignment (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:200:7:    expected unsigned short [usertype] *map1
linux/arch/x86_64/kernel/vsyscall.c:200:7:    got void [noderef] *<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:203:7: warning: incorrect type in assignment (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:203:7:    expected unsigned short [usertype] *map2
linux/arch/x86_64/kernel/vsyscall.c:203:7:    got void [noderef] *<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:215:10: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:215:10:    expected void volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:215:10:    got unsigned short [usertype] *map2
linux/arch/x86_64/kernel/vsyscall.c:217:10: warning: incorrect type in argument 1 (different address spaces)
linux/arch/x86_64/kernel/vsyscall.c:217:10:    expected void volatile [noderef] *addr<asn:2>
linux/arch/x86_64/kernel/vsyscall.c:217:10:    got unsigned short [usertype] *map1
Signed-off-by: NAndi Kleen <ak@suse.de>

Minor cleanup. Keep setup.c free from unrelated clutter.
Signed-off-by: NAndi Kleen <ak@suse.de>

Move it into srat.c No need to clutter up setup.c for it

And remove use in setup.c completely - it only guarded a printk
which can be done unconditionally.
Signed-off-by: NAndi Kleen <ak@suse.de>

Removes code duplication between i386/x86-64.

Not needed anymore in setup.c since early_param cleanup

Cc: len.brown@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>

I think it was only needed for the printks and we can do them later.

I put in a single early_printk so that we know the kernel is alive
(early_printk doesn't need any locks)

This makes some things easier for initialization of unwind for
lockdep, which is needed by later patches.

cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

Instead of hackish manual parsing

Requires earlier i386 patchkit, but also fixes i386 early_printk again.

I removed some obsolete really early parameters which didn't do anything useful.
Also made a few parameters that needed it early (mostly oops printing setup)

Also removed one panic check that wasn't visible without
early console anyways (the early console is now initialized after that
panic)

This cleans up a lot of code.
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch replaces the open-coded early commandline parsing
throughout the i386 boot code with the generic mechanism (already used
by ppc, powerpc, ia64 and s390).  The code was inconsistent with
whether it deletes the option from the cmdline or not, meaning some of
these will get passed through the environment into init.

This transformation is mainly mechanical, but there are some notable
parts:

1) Grammar: s/linux never set's it up/linux never sets it up/

2) Remove hacked-in earlyprintk= option scanning.  When someone
   actually implements CONFIG_EARLY_PRINTK, then they can use
   early_param().
[AK: actually it is implemented, but I'm adding the early_param it in the next
x86-64 patch]

3) Move declaration of generic_apic_probe() from setup.c into asm/apic.h

4) Various parameters now moved into their appropriate files (thanks Andi).

5) All parse functions which examine arg need to check for NULL,
   except one where it has subtle humor value.

AK: readded acpi_sci handling which was completely dropped
AK: moved some more variables into acpi/boot.c

Cc: len.brown@intel.com
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>

We currently assume that boot parameters which are handled by
early_param() will not overlap boot parameters handled by __setup: if
they do, behaviour is dependent on link order, usually meaning __setup
will not get called.

ACPI wants to use early_param("pci"), and pci uses __setup("pci="), so
we modify the core to let them coexist: "pci=noacpi" will now get
passed to both.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>

This makes it possible to modify CPU flags in command line
options without hacks.

And remove another copy in head64.c
Signed-off-by: NAndi Kleen <ak@suse.de>

The lock prefix will cause an exception when used with the
popf instruction, so no need to continue searching after it's
found.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

There's no need to check for invalid DMA data direction in nommu and
gart since we do it in dma-mapping.h anyway before calling the
individual dma-ops.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Allows easier extension of the GDT by using the proper C symbol
for the size in the descriptor.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add unwind annotations to arch/x86_64/lib/*.S, and also use the macros
provided by linux/linkage.h where-ever possible.

Some of the alternative instructions handling needed to be adjusted so
that the replacement code would also have valid unwind information.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

- Inline spinlock strings into their inline functions
- Convert macros to typesafe inlines
- Replace some leftover __asm__ __volatile__s with asm volatile
Signed-off-by: NAndi Kleen <ak@suse.de>

- Inline spinlock strings into their inline functions
- Convert macros to typesafe inlines
- Replace some leftover __asm__ __volatile__s with asm volatile
Signed-off-by: NAndi Kleen <ak@suse.de>

When testing for the REX instruction prefix, first check
for 32-bit mode because in compat mode the REX prefix is an
increment instruction.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Lock sections cannot be handled by the dwarf2 unwinder.

Disadvantage is a taken branch in the hot path.
Signed-off-by: NAndi Kleen <ak@suse.de>

Lock sections don't work the new dwarf2 unwinder
This generates slightly smaller code. It adds one more taken
jump to the fast path.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Lock sections don't work the new dwarf2 unwinder
This generates slightly smaller code. It adds one more taken
jump to the fast path.

Also move the trampolines into semaphore.S and add proper CFI
annotations.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Lock sections don't work the new dwarf2 unwinder
This generates slightly smaller code. It adds one more taken
jump to the fast path.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

Make translation_disabled a uchar rather than an int
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The pci_get_device() API decrements the reference count on the 'from'
parameter when it continues searching. Therefore, take a ref count on
Calgary bus when we initialize them in either translated or
non-translated mode.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

We were freeing the iommu_table and leaking the bitmap pages. Also
rename it to calgary_free_bus, which is more accurate.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>