Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.

* Restartable sequences (per-cpu atomics)

Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.

The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.

Here are benchmarks of various rseq use-cases.

Test hardware:

arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading

The following benchmarks were all performed on a single thread.

* Per-CPU statistic counter increment

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                344.0                 31.4          11.0
x86-64:                15.3                  2.0           7.7

* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
             per-cpu buffer

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:               2502.0                 2250.0         1.1
x86-64:               117.4                   98.0         1.2

* liburcu percpu: lock-unlock pair, dereference, read/compare word

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                751.0                 128.5          5.8
x86-64:                53.4                  28.6          1.9

* jemalloc memory allocator adapted to use rseq

Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):

The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.

* Reading the current CPU number

Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.

Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:

- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
  executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
  assembly, which makes it a useful building block for restartable
  sequences.
- The approach of reading the cpu id through memory mapping shared
  between kernel and user-space is portable (e.g. ARM), which is not the
  case for the lsl-based x86 vdso.

On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.

Benchmarking various approaches for reading the current CPU number:

ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop):                                    8.4 ns
- Read CPU from rseq cpu_id:                               16.7 ns
- Read CPU from rseq cpu_id (lazy register):               19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu:                           301.8 ns
- getcpu system call:                                     234.9 ns

x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop):                                    0.8 ns
- Read CPU from rseq cpu_id:                                0.8 ns
- Read CPU from rseq cpu_id (lazy register):                0.8 ns
- Read using gs segment selector:                           0.8 ns
- "lsl" inline assembly:                                   13.0 ns
- glibc 2.19-0ubuntu6 getcpu:                              16.6 ns
- getcpu system call:                                      53.9 ns

- Speed (benchmark taken on v8 of patchset)

Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:

Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.

* CONFIG_RSEQ=n

avg.:      41.37 s
std.dev.:   0.36 s

* CONFIG_RSEQ=y

avg.:      40.46 s
std.dev.:   0.33 s

- Size

On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.

[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdfSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com

There are a number of bits of code sprinkled around the kernel to
set a thread flag if a certain condition is true, and clear it
otherwise.

To help make those call sites terser and less cumbersome, this
patch adds a new family of thread flag manipulators

	update*_thread_flag([...,] flag, cond)

which do the equivalent of:

	if (cond)
		set*_thread_flag([...,] flag);
	else
		clear*_thread_flag([...,] flag);
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The cond_resched_softirq() macro is not used anywhere in mainline, so
this commit simplifies the kernel by eliminating it.
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Tested-by: NNicholas Piggin <npiggin@gmail.com>

sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()

In the following commit:

  247f2f6f ("sched/core: Don't schedule threads on pre-empted vCPUs")

... we distinguish between idle_cpu() when the vCPU is not running for
scheduling threads.

However, the idle_cpu() function is used in other places for
actually checking whether the state of the CPU is idle or not.

Hence split the use of that function based on the desired return value,
by introducing the available_idle_cpu() function.

This fixes a (slight) regression in that initial vCPU commit, because
some code paths (like the load-balancer) don't care and shouldn't care
if the vCPU is preempted or not, they just want to know if there's any
tasks on the CPU.
Signed-off-by: NRohit Jain <rohit.k.jain@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dhaval.giani@oracle.com
Cc: linux-kernel@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Link: http://lkml.kernel.org/r/1525883988-10356-1-git-send-email-rohit.k.jain@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Gaurav reported a perceived problem with TASK_PARKED, which turned out
to be a broken wait-loop pattern in __kthread_parkme(), but the
reported issue can (and does) in fact happen for states that do not do
condition based sleeps.

When the 'current->state = TASK_RUNNING' store of a previous
(concurrent) try_to_wake_up() collides with the setting of a 'special'
sleep state, we can loose the sleep state.

Normal condition based wait-loops are immune to this problem, but for
sleep states that are not condition based are subject to this problem.

There already is a fix for TASK_DEAD. Abstract that and also apply it
to TASK_STOPPED and TASK_TRACED, both of which are also without
condition based wait-loop.
Reported-by: NGaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

For some as yet not understood reason, Tony gets unaligned access
traps on IA64 because of:

  struct util_est ue = READ_ONCE(p->se.avg.util_est);

and:

  WRITE_ONCE(p->se.avg.util_est, ue);

introduced by commit:

  d519329f ("sched/fair: Update util_est only on util_avg updates")

Normally those two fields should end up on an 8-byte aligned location,
but UP and RANDSTRUCT can mess that up so enforce the alignment
explicitly.

Also make the alignment on sched_avg unconditional, as it is really
about data locality, not false-sharing.

With or without this patch the layout for sched_avg on a
ia64-defconfig build looks like:

	$ pahole -EC sched_avg ia64-defconfig/kernel/sched/core.o
	die__process_function: tag not supported (INVALID)!
	struct sched_avg {
		/* typedef u64 */ long long unsigned int     last_update_time;                   /*     0     8 */
		/* typedef u64 */ long long unsigned int     load_sum;                           /*     8     8 */
		/* typedef u64 */ long long unsigned int     runnable_load_sum;                  /*    16     8 */
		/* typedef u32 */ unsigned int               util_sum;                           /*    24     4 */
		/* typedef u32 */ unsigned int               period_contrib;                     /*    28     4 */
		long unsigned int          load_avg;                                             /*    32     8 */
		long unsigned int          runnable_load_avg;                                    /*    40     8 */
		long unsigned int          util_avg;                                             /*    48     8 */
		struct util_est {
			unsigned int       enqueued;                                             /*    56     4 */
			unsigned int       ewma;                                                 /*    60     4 */
		} util_est; /*    56     8 */
		/* --- cacheline 1 boundary (64 bytes) --- */

		/* size: 64, cachelines: 1, members: 9 */
	};
Reported-and-Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Norbert Manthey <nmanthey@amazon.de>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony <tony.luck@intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: d519329f ("sched/fair: Update util_est only on util_avg updates")
Link: http://lkml.kernel.org/r/20180405080521.GG4129@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The util_avg signal computed by PELT is too variable for some use-cases.
For example, a big task waking up after a long sleep period will have its
utilization almost completely decayed. This introduces some latency before
schedutil will be able to pick the best frequency to run a task.

The same issue can affect task placement. Indeed, since the task
utilization is already decayed at wakeup, when the task is enqueued in a
CPU, this can result in a CPU running a big task as being temporarily
represented as being almost empty. This leads to a race condition where
other tasks can be potentially allocated on a CPU which just started to run
a big task which slept for a relatively long period.

Moreover, the PELT utilization of a task can be updated every [ms], thus
making it a continuously changing value for certain longer running
tasks. This means that the instantaneous PELT utilization of a RUNNING
task is not really meaningful to properly support scheduler decisions.

For all these reasons, a more stable signal can do a better job of
representing the expected/estimated utilization of a task/cfs_rq.
Such a signal can be easily created on top of PELT by still using it as
an estimator which produces values to be aggregated on meaningful
events.

This patch adds a simple implementation of util_est, a new signal built on
top of PELT's util_avg where:

    util_est(task) = max(task::util_avg, f(task::util_avg@dequeue))

This allows to remember how big a task has been reported by PELT in its
previous activations via f(task::util_avg@dequeue), which is the new
_task_util_est(struct task_struct*) function added by this patch.

If a task should change its behavior and it runs longer in a new
activation, after a certain time its util_est will just track the
original PELT signal (i.e. task::util_avg).

The estimated utilization of cfs_rq is defined only for root ones.
That's because the only sensible consumer of this signal are the
scheduler and schedutil when looking for the overall CPU utilization
due to FAIR tasks.

For this reason, the estimated utilization of a root cfs_rq is simply
defined as:

    util_est(cfs_rq) = max(cfs_rq::util_avg, cfs_rq::util_est::enqueued)

where:

    cfs_rq::util_est::enqueued = sum(_task_util_est(task))
                                 for each RUNNABLE task on that root cfs_rq

It's worth noting that the estimated utilization is tracked only for
objects of interests, specifically:

 - Tasks: to better support tasks placement decisions
 - root cfs_rqs: to better support both tasks placement decisions as
                 well as frequencies selection
Signed-off-by: NPatrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@android.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20180309095245.11071-2-patrick.bellasi@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It's unused:

  $ git grep "\<TASK_ALL\>" | wc -l
  1

... and it is also dangerous, kill the bugger.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180227160510.10829-1-bigeasy@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are several functions that do find_task_by_vpid() followed by
get_task_struct().  We can use a helper function instead.

Link: http://lkml.kernel.org/r/1509602027-11337-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The select_idle_sibling() (SIS) rewrite in commit:

  10e2f1ac ("sched/core: Rewrite and improve select_idle_siblings()")

... replaced a domain iteration with a search that broadly speaking
does a wrapped walk of the scheduler domain sharing a last-level-cache.

While this had a number of improvements, one consequence is that two tasks
that share a waker/wakee relationship push each other around a socket. Even
though two tasks may be active, all cores are evenly used. This is great from
a search perspective and spreads a load across individual cores, but it has
adverse consequences for cpufreq. As each CPU has relatively low utilisation,
cpufreq may decide the utilisation is too low to used a higher P-state and
overall computation throughput suffers.

While individual cpufreq and cpuidle drivers may compensate by artifically
boosting P-state (at c0) or avoiding lower C-states (during idle), it does
not help if hardware-based cpufreq (e.g. HWP) is used.

This patch tracks a recently used CPU based on what CPU a task was running
on when it last was a waker a CPU it was recently using when a task is a
wakee. During SIS, the recently used CPU is used as a target if it's still
allowed by the task and is idle.

The benefit may be non-obvious so consider an example of two tasks
communicating back and forth. Task A may be an application doing IO where
task B is a kworker or kthread like journald. Task A may issue IO, wake
B and B wakes up A on completion.  With the existing scheme this may look
like the following (potentially different IDs if SMT is in use but similar
principal applies).

 A (cpu 0)	wake	B (wakes on cpu 1)
 B (cpu 1)	wake	A (wakes on cpu 2)
 A (cpu 2)	wake	B (wakes on cpu 3)
 etc.

A careful reader may wonder why CPU 0 was not idle when B wakes A the
first time and it's simply due to the fact that A can be rescheduled to
another CPU and the pattern is that prev == target when B tries to wakeup A
and the information about CPU 0 has been lost.

With this patch, the pattern is more likely to be:

 A (cpu 0)	wake	B (wakes on cpu 1)
 B (cpu 1)	wake	A (wakes on cpu 0)
 A (cpu 0)	wake	B (wakes on cpu 1)
 etc

i.e. two communicating casts are more likely to use just two cores instead
of all available cores sharing a LLC.

The most dramatic speedup was noticed on dbench using the XFS filesystem on
UMA as clients interact heavily with workqueues in that configuration. Note
that a similar speedup is not observed on ext4 as the wakeup pattern
is different:

                          4.15.0-rc9             4.15.0-rc9
                           waprev-v1        biasancestor-v1
 Hmean      1      287.54 (   0.00%)      817.01 ( 184.14%)
 Hmean      2     1268.12 (   0.00%)     1781.24 (  40.46%)
 Hmean      4     1739.68 (   0.00%)     1594.47 (  -8.35%)
 Hmean      8     2464.12 (   0.00%)     2479.56 (   0.63%)
 Hmean     64     1455.57 (   0.00%)     1434.68 (  -1.44%)

The results can be less dramatic on NUMA where automatic balancing interferes
with the test. It's also known that network benchmarks running on localhost
also benefit quite a bit from this patch (roughly 10% on netperf RR for UDP
and TCP depending on the machine). Hackbench also seens small improvements
(6-11% depending on machine and thread count). The facebook schbench was also
tested but in most cases showed little or no different to wakeup latencies.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180130104555.4125-5-mgorman@techsingularity.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Worker kthread needs to be able to change frequency for all other
threads.

Make it special, just under STOP class.
Signed-off-by: NJuri Lelli <juri.lelli@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: alessio.balsini@arm.com
Cc: bristot@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: joelaf@google.com
Cc: juri.lelli@redhat.com
Cc: mathieu.poirier@linaro.org
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: rjw@rjwysocki.net
Cc: rostedt@goodmis.org
Cc: tkjos@android.com
Cc: tommaso.cucinotta@santannapisa.it
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/20171204102325.5110-4-juri.lelli@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds the possibility of getting the delivery of a SIGXCPU
signal whenever there is a runtime overrun. The request is done through
the sched_flags field within the sched_attr structure.

Forward port of https://lkml.org/lkml/2009/10/16/170Tested-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NLuca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1513077024-25461-1-git-send-email-claudio@evidence.eu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: NPalmer Dabbelt <palmer@sifive.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>

gcc-8 warns about using strncpy() with the source size as the limit:

  fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]

This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.

This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.

There are only 23 callsites which I all reviewed to ensure this is
currently the case.  We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.

Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NKees Cook <keescook@chromium.org>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.

If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.

Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...

This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.

Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.

( Note that it might make sense to maintain it out of tree and go through
  the false positives every now and then and see whether new bugs were
  introduced. )

Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It doesn't cause a run-time bug, but these bitfields should be unsigned.
When it's signed ->dl_throttled is set to either 0 or -1, instead of
0 and 1 as expected.

The sched.h file is included into tons of places so Sparse generates
a flood of warnings like this:

  ./include/linux/sched.h:477:54: error: dubious one-bit signed bitfield
Reported-by: NMatthew Wilcox <willy@infradead.org>
Reported-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLuca Abeni <luca.abeni@santannapisa.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Cc: luca abeni <luca.abeni@santannapisa.it>
Link: http://lkml.kernel.org/r/20171013070121.dzcncojuj2f4utij@mwandaSigned-off-by: NIngo Molnar <mingo@kernel.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want to centralize the isolation features, to be done by the housekeeping
subsystem and scheduler domain isolation is a significant part of it.

No intended behaviour change, we just reuse the housekeeping cpumask
and core code.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Ask the compiler to use a single bit for storing true / false values,
instead of wasting the size of a whole int value.
Tested with gcc 5.4.0 on x86_64, and the compiler produces the expected
Assembly (similar to the Assembly code generated when explicitly accessing
the bits with bitmasks, "&" and "|").
Signed-off-by: Nluca abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-5-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

Steve requested better names for the new task-state helper functions.

So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().
Requested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The load balancer uses runnable_load_avg as load indicator. For
!cgroup this is:

  runnable_load_avg = \Sum se->avg.load_avg ; where se->on_rq

That is, a direct sum of all runnable tasks on that runqueue. As
opposed to load_avg, which is a sum of all tasks on the runqueue,
which includes a blocked component.

However, in the cgroup case, this comes apart since the group entities
are always runnable, even if most of their constituent entities are
blocked.

Therefore introduce a runnable_weight which for task entities is the
same as the regular weight, but for group entities is a fraction of
the entity weight and represents the runnable part of the group
runqueue.

Then propagate this load through the PELT hierarchy to arrive at an
effective runnable load avgerage -- which we should not confuse with
the canonical runnable load average.
Suggested-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it
its own print state because it will not in fact get woken by regular
wakeups and is a long-term state.

This requires moving TASK_PARKED into the TASK_REPORT mask, and since
that latter needs to be a contiguous bitmask, we need to shuffle the
bits around a bit.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.

This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove yet another task-state char instance.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Convert trace_sched_switch to use the common task-state helpers and
fix the "X" and "Z" order, possibly they ended up in the wrong order
because TASK_REPORT has them in the wrong order too.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Bit patterns are easier in hex.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Currently get_task_state() and task_state_to_char() report different
states, create a number of common helpers and unify the reported state
space.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

... with the generic rbtree flavor instead. No changes
in semantics whatsoever.

Link: http://lkml.kernel.org/r/20170719014603.19029-10-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This was reported many times, and this was even mentioned in commit
52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.

We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups.  Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: NTroy Kensinger <tkensinger@google.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the exit-time support for TASKS_RCU is open-coded in do_exit().
This commit creates exit_tasks_rcu_start() and exit_tasks_rcu_finish()
APIs for do_exit() use.  This has the benefit of confining the use of the
tasks_rcu_exit_srcu variable to one file, allowing it to become static.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The ring buffer can be overwritten by hardirq/softirq/work contexts.
That cases must be considered on rollback or commit. For example,

          |<------ hist_lock ring buffer size ----->|
          ppppppppppppiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
wrapped > iiiiiiiiiiiiiiiiiiiiiii....................

          where 'p' represents an acquisition in process context,
          'i' represents an acquisition in irq context.

On irq exit, crossrelease tries to rollback idx to original position,
but it should not because the entry already has been invalid by
overwriting 'i'. Avoid rollback or commit for entries overwritten.
Signed-off-by: NByungchul Park <byungchul.park@lge.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-7-git-send-email-byungchul.park@lge.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Lockdep is a runtime locking correctness validator that detects and
reports a deadlock or its possibility by checking dependencies between
locks. It's useful since it does not report just an actual deadlock but
also the possibility of a deadlock that has not actually happened yet.
That enables problems to be fixed before they affect real systems.

However, this facility is only applicable to typical locks, such as
spinlocks and mutexes, which are normally released within the context in
which they were acquired. However, synchronization primitives like page
locks or completions, which are allowed to be released in any context,
also create dependencies and can cause a deadlock.

So lockdep should track these locks to do a better job. The 'crossrelease'
implementation makes these primitives also be tracked.
Signed-off-by: NByungchul Park <byungchul.park@lge.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/1502089981-21272-6-git-send-email-byungchul.park@lge.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

A while ago someone, and I cannot find the email just now, asked if we
could not implement the RECLAIM_FS inversion stuff with a 'fake' lock
like we use for other things like workqueues etc. I think this should
be possible which allows reducing the 'irq' states and will reduce the
amount of __bfs() lookups we do.

Removing the 1 IRQ state results in 4 less __bfs() walks per
dependency, improving lockdep performance. And by moving this
annotation out of the lockdep code it becomes easier for the mm people
to extend.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: iamjoonsoo.kim@lge.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Now that we have more than one place to get the task state,
intruduce the task_state_to_char() helper function to save some code.

No functionality changed.
Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <cj.chengjian@huawei.com>
Cc: <huawei.libin@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1502095463-160172-3-git-send-email-xiexiuqi@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The root directory, ctrl_mon and monitor groups are populated
with a read/write file named "tasks". When read, it shows all the task
IDs assigned to the resource group.

Tasks can be added to groups by writing the PID to the file. A task can
be present in one "ctrl_mon" group "and" one "monitor" group. IOW a
PID_x can be seen in a ctrl_mon group and a monitor group at the same
time. When a task is added to a ctrl_mon group, it is automatically
removed from the previous ctrl_mon group where it belonged. Similarly if
a task is moved to a monitor group it is removed from the previous
monitor group . Also since the monitor groups can only have subset of
tasks of parent ctrl_mon group, a task can be moved to a monitor group
only if its already present in the parent ctrl_mon group.

Task membership is indicated by a new field in the task_struct "u32
rmid" which holds the RMID for the task. RMID=0 is reserved for the
default root group where the tasks belong to at mount.

[tony: zero the rmid if rdtgroup was deleted when task was being moved]
Signed-off-by: NTony Luck <tony.luck@linux.intel.com>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-16-git-send-email-vikas.shivappa@linux.intel.com

OS associates a CLOSid(Class of service id) to a task by writing the
high 32 bits of per CPU IA32_PQR_ASSOC MSR when a task is scheduled in.
CPUID.(EAX=10H, ECX=1):EDX[15:0] enumerates the max CLOSID supported and
it is zero indexed. Hence change the type to u32 from int.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-15-git-send-email-vikas.shivappa@linux.intel.com

We currently have a CONFIG_RDT_A which is for RDT(Resource directory
technology) allocation based resctrl filesystem interface. As a
preparation to add support for RDT monitoring as well into the same
resctrl filesystem, change the config option to be CONFIG_RDT which
would include both RDT allocation and monitoring code.

No functional change.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-4-git-send-email-vikas.shivappa@linux.intel.com

The value written to fail-nth file is parsed as 0-based.  Parsing as
one-based is more natural to understand and it enables to cancel the
previous setup by simply writing '0'.

This change also converts task->fail_nth from signed to unsigned int.

Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

 "Write to this file of integer N makes N-th call in the current task
  fail (N is 0-based). Read from this file returns a single char 'Y' or
  'N' that says if the fault setup with a previous write to this file
  was injected or not, and disables the fault if it wasn't yet injected.
  Note that this file enables all types of faults (slab, futex, etc).
  This setting takes precedence over all other generic settings like
  probability, interval, times, etc. But per-capability settings (e.g.
  fail_futex/ignore-private) take precedence over it. This feature is
  intended for systematic testing of faults in a single system call. See
  an example below"

Why add a new setting:
1. Existing settings are global rather than per-task.
   So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
   which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
   of all of probability, interval, times, space, task-filter and
   unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
   types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
   stress testing better be done from an unprivileged user.
   Similarly, this would require opening the debugfs files to the
   unprivileged user, as he would need to reopen at least times file
   (not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

We want to integrate this into syzkaller fuzzer.  A prototype has found
10 bugs in kernel in first day of usage:

  https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned.  So I am fine with the current
version of the code.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>