- 19 11月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
These got lost in the last i2c cleanup. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=23222Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 11月, 2010 38 次提交
-
-
由 Thomas Hellstrom 提交于
A process suspended waiting for a higher sequence or no sequence to unreserve, a bo may be beaten to the reservation by a process with a lower sequence. In that case the first process should give up trying to reserve and return -EAGAIN. In order for that to happen, we must wake waiting processes when we change sequence, so that they have a chance to detect the new sequence. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We aren't currently using tiling in userspace on evergreen, but the info we currently return for the tiling info query (gb_addr_config) is no adequate for userspace tiling alignment calculations. It does not contain the bank info. Create a custom tiling info dword with all the necessary info (num channels, num banks, group size, row size). Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We were previously dropping alignment requests on the floor when allocating buffers so we always ended up page aligned. Certain tiling modes on 6xx+ require larger alignment which wasn't happening before. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This causes the connector to not be added since i2c init fails for the adapter. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31688 Noticed by Ari Savolainen. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Ari Savolainen <ari.m.savolainen@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
These are external encoder chips connected via DVO or DP. The actual external encoder programming is handled by the kms encoder functions for primary encoder. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Handle all the various asic family specific things for DVO. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The eDP panel must be powered up for aux transactions, so power it up for detect and mode probe functions, otherwise power it up or down based on dpms. v2: - only mess with eDP panel on DCE4+ - only mess with eDP panel on eDP connectors, not all DP connectors v3: - be extra careful to only mess with eDP panels on eDP connectors v4: - avoid possible null derefernce if a connector has not been assigned to the encoder Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
If there was no connector mapped to the encoder, atombios_get_encoder_mode() returned 0 which is the id for DP. Return something sane instead based on the encoder id. This avoids hitting the DP paths on non-DP encoders. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Seems some newer systems require this explicitly. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Looks like a typo in: drm/radeon/r600: fix tiling issues in CS checker. (f30df2fa) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Vasiliy Kulikov 提交于
enable_vblank implementations should use negative result to indicate error. radeon_enable_vblank() returns EINVAL in this case. Change this to -EINVAL. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Tiled buffers have the same alignment requirements regardless of whether the surface is for db, cb, or textures. Previously, the calculations where inconsistent for each buffer type. - Unify the alignment calculations in a common function - Standardize the alignment units (pixels for pitch/height/depth, bytes for base) - properly check the buffer base alignments Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Andy Lutomirski 提交于
The old code generated an interrupt storm bad enough to completely take down my system. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Avoid confusing userspace by not publishing backlight controls if ACPI equivalents are available. Reported-by: NAaron Sowry <aaron@aeneby.se> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Improvements: - Fix bug in switch statement - Add parts of 0x10022c, 0x10023c - Clean up 0x100234 - Comment out assumption in 0x100228 until verified Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Reported-by: NTomas Miljenovic <tomasmiljenovic@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Reported-by: NTomas Miljenovic <tomasmiljenovic@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Martin Peres 提交于
Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Analog output polling makes GL programs jerky when pageflip is being used because it's carried out with the mode_config mutex held. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Reported-by: NXavier Chantry <chantry.xavier@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Lucas Stach 提交于
Nouveau sets the PCIE GART size to 64MiB for all cards before nv50, but nv40 has enough RAMIN space to support 512MiB GART size. This patch fixes this value to make use of this hardware capability. Signed-off-by: NLucas Stach <dev@lynxeye.de> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
And a slight tweak which gets us closer to VBIOS-calculated numbers. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
This will be needed for Z compression and to take smarter placement decisions. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Acked-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Acked-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
The ramht code called some gpuobj functions with the HARDIRQ-safe RAMHT spinlock held, this could potentially lead to a dead lock because ramin_lock is HARDIRQ-unsafe. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Remove some unused/duplicated definitions and make sparse happy again. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
This allows the user to set a mode larger than the native one, useful if we had trouble finding the actual native mode (e.g. because it goes above the hardware bandwidth limits). Reported-by: NGrzesiek Sójka <pld@pfu.pl> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Reported-by: NGrzesiek Sójka <pld@pfu.pl> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Jiri Slaby 提交于
There are two messages in the ISR of nouveau which might be printed out hundred times in a second. Ratelimit them. (We need to move nouveau_ratelimit to the top of the file.) Signed-off-by: NJiri Slaby <jslaby@suse.cz> Reviewed-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 10 11月, 2010 1 次提交
-
-
由 Thomas Hellstrom 提交于
Call destroy() on _all_ ttm_bo_init() failures, and make sure that behavior is documented in the function description. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-