Remove code in async receive handling that serves no purpose with new tty
receive buffering.  Previously this code tried to free up receive buffer
space, but now does nothing useful while making expensive calls.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add driver support for general purpose I/O feature of the Synclink GT
adapters.
Signed-off-by: NPaul Fulghum <paulkf@micrgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dead code from synclink driver.  This was used previously when the
write method had a from_user flag, which has been removed.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that Christoph Lameter's atomic_long_t support is merged in mainline,
might as well convert asm-generic/local.h to use it, so the same code can
be used for both sizes of 32 and 64-bit unsigned longs.

akpm sayeth:

Q:

  Is there any particular reason why these routines weren't simply
  implemented with local_save/restore_flags, if they are only meant to
  guarantee atomicity to the local cpu?  I'm sure on most platforms this
  would be more efficient than using an atomic...

A:

  The whole _point_ of local_t is to avoid local_irq_disable().  It's
  designed to exploit the fact that many CPUs can do incs and decs in a way
  which is atomic wrt local interrupts, but not atomic wrt SMP.

But this patch makes sense, because asm-generic/local.h is just a fallback
implementation for architectures which either cannot perform these
local-irq-atomic operations, or its maintainers haven't yet got around to
implementing them.

We need more work done on local_t in the 2.6.17 timeframe - they're defined as
unsigned long, but some architectures implement them as signed long.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove some duplicate BCD definitions
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up some RTC whitespace and style
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sync may still be needed for CPU clock calibration but we don't sync in
the regular case.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move real_year inside the read loop and move the spinlock up as well
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reading the CMOS clock on x86 and some other arches currently takes up to one
second because it synchronizes with the CMOS second tick-over.  This delay
shows up at boot time as well a resume time.

This is the currently the most substantial boot time delay for machines that
are working towards instant-on capability.  Also, a quick back of the envelope
calculation (.5sec * 2M users * 1 boot a day * 10 years) suggests it has cost
Linux users in the neighborhood of a million man-hours.

An earlier thread on this topic is here:

http://groups.google.com/group/linux.kernel/browse_frm/thread/8a24255215ff6151/2aa97e66a977653d?hl=en&lr=&ie=UTF-8&rnum=1&prev=/groups%3Fhl%3Den%26lr%3D%26ie%3DUTF-8%26selm%3D1To2R-2S7-11%40gated-at.bofh.it#2aa97e66a977653d

..from which the consensus seems to be that it's no longer desirable.

In my view, there are basically four cases to consider:

1) networked, need precise walltime: use NTP
2) networked, don't need precise walltime: use NTP anyway
3) not networked, don't need sub-second precision walltime: don't care
4) not networked, need sub-second precision walltime:
   get a network or a radio time source because RTC isn't good enough anyway

So this patch series simply removes the synchronization in favor of a simple
seqlock-like approach using the seconds value.

Note that for purposes of timer accuracy on wakeup, this patch will cause us
to fire timers up to one second late.  But as the current timer resume code
will already sync once (or more!), it's no worse for short timers.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix off-by-1 error in TSB grow check.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: drop duplicate assignment in request_sock
  [IPSEC]: Fix tunnel error handling in ipcomp6

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Don't make debugfs depend on DEBUG_KERNEL
  [PATCH] Fix blktrace compile with sysfs not defined
  [PATCH] unused label in drivers/block/cciss.
  [BLOCK] increase size of disk stat counters
  [PATCH] blk_execute_rq_nowait-speedup
  [PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failure
  [BLOCK] ll_rw_blk: kmalloc -> kzalloc conversion
  [PATCH] kzalloc() conversion in drivers/block
  [PATCH] update max_sectors documentation

... being careful that mutex_trylock is inverted wrt down_trylock
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When retrying a write due to barrier failure, we don't reset 'remaining', so
it goes negative and never hits 0 again.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An md array can be asked to change the amount of each device that it is using,
and in particular can be asked to use the maximum available space.  This
currently only works if the first device is not larger than the rest.  As
'size' gets changed and so 'fit' becomes wrong.  So check if a 'fit' is
required early and don't corrupt it.
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

raid5 overloads bi_phys_segments to count the number of blocks that the
request was broken in to so that it knows when the bio is completely handled.

Accessing this must always be done under a spinlock.  In one case we also call
bi_end_io under that spinlock, which probably isn't ideal as bi_end_io could
be expensive (even though it isn't allowed to sleep).

So we reducde the range of the spinlock to just accessing bi_phys_segments.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

wait_event_lock_irq puts a ';' after its usage of the 4th arg, so we don't
need to.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This allows user-space to access data safely.  This is needed for raid5
reshape as user-space needs to take a backup of the first few stripes before
allowing reshape to commence.

It will also be useful in cluster-aware raid1 configurations so that all
cluster members can leave a section of the array untouched while a
resync/recovery happens.

A 'start' and 'end' of the suspended range are written to 2 sysfs attributes.
Note that only one range can be suspended at a time.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This allows reshape to be triggerred via sysfs (which is the only way to start
it happening).
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

check_reshape checks validity and does things that can be done instantly -
like adding devices to raid1.  start_reshape initiates a restriping process to
convert the whole array.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of checkpointing at each stripe, only checkpoint when a new write
would overwrite uncheckpointed data.  Block any write to the uncheckpointed
area.  Arbitrarily checkpoint at least every 3Meg.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We allow the superblock to record an 'old' and a 'new' geometry, and a
position where any conversion is up to.  The geometry allows for changing
chunksize, layout and level as well as number of devices.

When using verion-0.90 superblock, we convert the version to 0.91 while the
conversion is happening so that an old kernel will refuse the assemble the
array.  For version-1, we use a feature bit for the same effect.

When starting an array we check for an incomplete reshape and restart the
reshape process if needed.  If the reshape stopped at an awkward time (like
when updating the first stripe) we refuse to assemble the array, and let
user-space worry about it.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds raid5_reshape and end_reshape which will start and finish the
reshape processes.

raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set, to discourage
accidental use.

Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry.

and Make sure that you have backups, just in case.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch provides the core of the resize/expand process.

sync_request notices if a 'reshape' is happening and acts accordingly.

It allocated new stripe_heads for the next chunk-wide-stripe in the target
geometry, marking them STRIPE_EXPANDING.

Then it finds which stripe heads in the old geometry can provide data needed
by these and marks them STRIPE_EXPAND_SOURCE.  This causes stripe_handle to
read all blocks on those stripes.

Once all blocks on a STRIPE_EXPAND_SOURCE stripe_head are read, any that are
needed are copied into the corresponding STRIPE_EXPANDING stripe_head.  Once a
STRIPE_EXPANDING stripe_head is full, it is marks STRIPE_EXPAND_READY and then
is written out and released.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to allow that different stripes are of different effective sizes, and
use the appropriate size.  Also, when a stripe is being expanded, we must
block any IO attempts until the stripe is stable again.

Key elements in this change are:
 - each stripe_head gets a 'disk' field which is part of the key,
   thus there can sometimes be two stripe heads of the same area of
   the array, but covering different numbers of devices.  One of these
   will be marked STRIPE_EXPANDING and so won't accept new requests.
 - conf->expand_progress tracks how the expansion is progressing and
   is used to determine whether the target part of the array has been
   expanded yet or not.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before a RAID-5 can be expanded, we need to be able to expand the stripe-cache
data structure.

This requires allocating new stripes in a new kmem_cache.  If this succeeds,
we copy cache pages over and release the old stripes and kmem_cache.

We then allocate new pages.  If that fails, we leave the stripe cache at it's
new size.  It isn't worth the effort to shrink it back again.

Unfortuanately this means we need two kmem_cache names as we, for a short
period of time, we have two kmem_caches.  So they are raid5/%s and
raid5/%s-alt
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The remainder of this batch implements raid5 reshaping.  Currently the only
shape change that is supported is added a device, but it is envisioned that
changing the chunksize and layout will also be supported, as well as changing
the level (e.g.  1->5, 5->6).

The reshape process naturally has to move all of the data in the array, and so
should be used with caution.  It is believed to work, and some testing does
support this, but wider testing would be great for increasing my confidence.

You will need a version of mdadm newer than 2.3.1 to make use of raid5 growth.
 This is because mdadm need to take a copy of a 'critical section' at the
start of the array incase there is a crash at an awkward moment.  On restart,
mdadm will restore the critical section and allow reshape to continue.

I hope to release a 2.4-pre by early next week - it still needs a little more
polishing.

This patch:

Previously the array of disk information was included in the raid5 'conf'
structure which was allocated to an appropriate size.  This makes it awkward
to change the size of that array.  So we split it off into a separate
kmalloced array which will require a little extra indexing, but is much easier
to grow.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

status_resync - used by /proc/mdstat to report the status of a resync, assumes
that device sizes will always fit into an 'unsigned long' This is no longer
the case...
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We are counting failed devices twice, once of the device that is failed, and
once for the hole that has been left in the array.  Remove the former so
'failed' matches 'missing'.  Storing these counts in the superblock is a bit
silly anyway....
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>