The mpic alias is already defined in the common armada-370-xp.dtsi, so
there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi
level.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

We now cache the MSI-X capability offset in the struct pci_dev, so no
need to find the capability again.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This tracks Alexandre Courbot's mainline GPIO rework
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>

The 'samsung,vbus-gpio' was submitted before pinmux landed for
exynos5250 and uses the old-style gpio specifier.  Fix the two
exynos5250 boards that use it.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.

This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.
Signed-off-by: NInderpal Singh <inderpal.singh@linaro.org>
Tested-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
        ‘regulator_enable’, declared with attribute warn_unused_result
        [-Wunused-result]
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Fix db8500_read_soc_id() to read all five soc_id number locations
instead of repeating the second one two times.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Trivial patch, adding the i2c Cypress trackpad used on Snow.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>

Since commit 657eee7d (media: coda: use genalloc API) the following build
error happens with imx_v4_v5_defconfig:

drivers/built-in.o: In function 'coda_remove':
clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free'
drivers/built-in.o: In function 'coda_probe':
clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool'
clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc'
clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys'
clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool'

Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit bca7a5a0 (ARM: cpu hotplug: remove majority of cache flushing
from platforms) removes include of <asm/cacheflush.h> and hence
discovers a few indirect inclusion and declaration problems as below.

  CC      arch/arm/mach-imx/hotplug.o
In file included from arch/arm/mach-imx/hotplug.c:16:0:
arch/arm/mach-imx/common.h:100:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/common.h:100:29: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
arch/arm/mach-imx/common.h:101:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_die’:
arch/arm/mach-imx/hotplug.c:53:2: error: implicit declaration of function ‘cpu_do_idle’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_kill’:
arch/arm/mach-imx/hotplug.c:58:26: error: ‘jiffies’ undeclared (first use in this function)
arch/arm/mach-imx/hotplug.c:58:26: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-imx/hotplug.c:58:2: error: implicit declaration of function ‘msecs_to_jiffies’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c:61:3: error: implicit declaration of function ‘time_after’ [-Werror=implicit-function-declaration]

Fix them by adding the needed inclusion and declaration.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

arch/xtensa/platforms/iss/simdisk.c: In function 'proc_read_simdisk':
arch/xtensa/platforms/iss/simdisk.c:220:12: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_write_simdisk':
arch/xtensa/platforms/iss/simdisk.c:241:38: error: 'buffer' undeclared (first use in this function)
arch/xtensa/platforms/iss/simdisk.c:241:38: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit a69755b1 ("xtensa
simdisk: switch to proc_create_data()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Enforce congruency of userspace shared mappings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Fix the one zillion warnings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This is the meat of the series which prevents any dcache alias creation
by always keeping the U and K mapping of a page congruent.
If a mapping already exists, and other tries to access the page, prev
one is flushed to physical page (wback+inv)

Essentially flush_dcache_page()/copy_user_highpage() create K-mapping
of a page, but try to defer flushing, unless U-mapping exist.
When page is actually mapped to userspace, update_mmu_cache() flushes
the K-mapping (in certain cases this can be optimised out)

Additonally flush_cache_mm(), flush_cache_range(), flush_cache_page()
handle the puring of stale userspace mappings on exit/munmap...

flush_anon_page() handles the existing U-mapping for anon page before
kernel reads it via the GUP path.

Note that while not complete, this is enough to boot a simple
dynamically linked Busybox based rootfs
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This preps the low level dcache flush helpers to take vaddr argument in
addition to the existing paddr to properly flush the VIPT dcache
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

If a board isn't using twl4030, then dtc will complain about the missing
phandle (which is in twl4030.dtsi).  Move the phy declaration to the dts
files.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 6770b211 (ARM: OMAP2+: Export SoC information to userspace)
had some broken return value handling as noted by Russell King:

+       soc_dev = soc_device_register(soc_dev_attr);
+       if (IS_ERR_OR_NULL(soc_dev)) {
+               kfree(soc_dev_attr);
+               return;
+       }
+
+       parent = soc_device_to_device(soc_dev);
+       if (!IS_ERR_OR_NULL(parent))
+               device_create_file(parent, &omap_soc_attr);

This is nonsense.  For the first, IS_ERR() is sufficient.  For the second,
tell me what error checking is required in the return value of this
function:

struct device *soc_device_to_device(struct soc_device *soc_dev)
{
        return &soc_dev->dev;
}

when you've already determined that the passed soc_dev is a valid pointer.
If you read the comments against the prototype:

/**
 * soc_device_to_device - helper function to fetch struct device
 * @soc: Previously registered SoC device container
 */
struct device *soc_device_to_device(struct soc_device *soc);

if "soc" is valid, it means the "previously registered SoC device container"
must have succeeded and that can only happen if the struct device has been
registered.  Ergo, there will always be a valid struct device pointer for
any registered SoC device container.  Therefore, if soc_device_register()
succeeds, then the return value from soc_device_to_device() will always be
valid and no error checking of it is required.

Simples.  The rule as ever applies here: get to know the APIs your using
and don't fumble around in the dark hoping that you'll get this stuff
right.

Fix it as noted by Russell.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add new clockevent driver that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: NRaghu Gandham <Raghu.Gandham@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Various whitespace and #ifdef removals for GIC and R4K clocksources.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.

  * No longer select CSRC_GIC by default for Malta platform.
  * Limit choice for either the GIC or R4K clocksource, not both.
  * Change location in Makefile.
  * Created new 'gic_read_count' function in common 'irq-gic.c' file.
  * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
  * Surround GIC specific code in Malta platform code with #ifdef's.
  * Only initialize the GIC clocksource if it was selected. Original
    code called it unconditionally if a GIC was found.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Move the global variable 'gic_frequency' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Move the global variable 'gic_present' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add logic needed to handle unaligned accesses in MIPS16e mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>

Add logic needed to properly calculate exceptions for delay slots
when in MIPS16e mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add structures for all the MIPS16e instructions. Also add the
enumerations for all the bit fields for opcodes, functions, etc.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strnlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strncpy' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'memset' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

This adds the option to build the Linux kernel using only the
microMIPS ISA. The resulting kernel binary is, at a minimum,
20% smaller than using the MIPS32R2 ISA.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b
and turn off LL/SC when building a pure microMIPS kernel. This is
a temporary fix until the cmpxchg assembly macro functions are
re-written to not use the HI/LO registers in address calculations.

Also add .insn in selected user access functions which would
otherwise produce ISA mode jump incompatibilities. This is also a
temporary fix.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Support vdso in microMIPS mode.
Signed-off-by: NDouglas Leung <Douglas.Leung@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add logic needed to handle unaligned accesses in microMIPS mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>

Add logic needed to properly calculate exceptions for delay slots
when in microMIPS mode.
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

All exceptions must be taken in microMIPS mode, never in classic
MIPS mode or the kernel falls apart. A few NOP instructions are
used to maintain the correct alignment of microMIPS versions of
the exception vectors.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>