The cpu is powered by regulator vdd_core on RV1108 evalution
board. Add it to the cpu dt node.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add cpu opp table for rv1108 to support frequency
from 408MHZ to 1008MHZ.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add VPU/VDEC/VOP/IEP iommu nodes
Signed-off-by: NSimon Xue <xxm@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add dt node of bosch accelerometer bma250e on rv1108 evb.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

RK805 is used as the voltage regulator on rv1108 evaluation
board. Add device tree node for it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

RV1108 EVB uses pwm0 modulate the backlight, add dt
node to enable it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add pwm device tree node for rv1108 soc
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add SPI device tree node for rv1108.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add saradc device tree node for rv1108 soc
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add watchdog device tree node for rv1108
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

There are four i2c controllers on rv1108, add
device tree node for them.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Make the code look better.
Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

i2s1 has 2 channels but not 8 channels.
Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>

[and the clock id hasn't been used in either clock-driver nor dts,
 so is safe to rename]
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add new clk ids for the peripherals on rv1108 soc.
Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add IEP/ISP/VPU/HEVC iommu nodes
Signed-off-by: NSimon Xue <xxm@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

In order to be able to use more than 4GB of RAM when the LPAE is
activated, the dts must be converted in 64 bits.
Signed-off-by: NTao Huang <huangtao@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add spi node and spi pinctrl for rk322x
Signed-off-by: NHuibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Somehow the strange property ordering of the rv1108 mmc nodes slipped
through when it was added. To lessen the confusion in the future, do
the needed reordering to bring them in line with our regular order.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Enable sdmmc on rv1108 evaluation board. Also
add pinctrl for sdmmc controller.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add a efuse node in the device tree for the rk3228 SoC.
Signed-off-by: NFinley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds gpio power-key support for rk3229-evb board.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch enables the tsadc for rk3229-evb board.

The rk3229 evb board uses the CRU to reset the chip since it has not
the PMIC to connect it, and TSHUT is low active on evb board.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch enables eMMC support for rk3229-evb board.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch enables io-domain support for rk3229-evb board.

The power domain of VCCIO3 is selected from maskrom, so we do not
need to configure it.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds the cpu-supply property so that cpu can do dvfs
on rk3229-evb board.
Signed-off-by: NFinley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds regulator info for rk3229-evb board.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds sdmmc/sdio controller nodes for rk3228 SoC.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This adds amend compatible content for eMMC of RK3228 SoC.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch sets PSCI as the default cpu enable-method for RK3228 SoC.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

We deprecated the "num-slots" property now and plan to get
rid of it finally. Just move a step to cleanup it from DT.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds io-domain support for rk3228 SoC.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Due to some tiny differences between RK3228 and RK3229, this patch adds
a basic dtsi file which first includes a new CPU opp table for RK3229.
Signed-off-by: NFrank Wang <frank.wang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

rk3288-evb have many tablet-used adc buttons.
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

saradc in rk3288-evb use 1.8v ref.
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add reference to the Mali GPU device tree node on rk3288-fennec
Tested on Fennec board.
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add reference to the Mali GPU device tree node on rk3288-evb.
Tested on rk3288-evb-act8846 board.
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add reference to the Mali GPU device tree node on rk3288-tinker.
Tested on Tinker board.
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

replace sdmcc with sdmmc rk3036.dtsi
Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch add spdif node for rk322x.
Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>