This commit changes some interfaces in extent status tree because we
need to use inode to count the cached objects in a extent status tree.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>

Single extent cache could be removed because we have extent status tree
as a extent cache, and it would be better.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>

After tracking all extent status, we already have a extent cache in
memory.  Every time we want to lookup a block mapping, we can first
try to lookup it in extent status tree to avoid a potential disk I/O.

A new function called ext4_es_lookup_extent is defined to finish this
work.  When we try to lookup a block mapping, we always call
ext4_map_blocks and/or ext4_da_map_blocks.  So in these functions we
first try to lookup a block mapping in extent status tree.

A new flag EXT4_GET_BLOCKS_NO_PUT_HOLE is used in ext4_da_map_blocks
in order not to put a hole into extent status tree because this hole
will be converted to delayed extent in the tree immediately.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>

By recording the phycisal block and status, extent status tree is able
to track the status of every extents.  When we call _map_blocks
functions to lookup an extent or create a new written/unwritten/delayed
extent, this extent will be inserted into extent status tree.

We don't load all extents from disk in alloc_inode() because it costs
too much memory, and if a file is opened and closed frequently it will
takes too much time to load all extent information.  So currently when
we create/lookup an extent, this extent will be inserted into extent
status tree.  Hence, the extent status tree may not comprehensively
contain all of the extents found in the file.

Here a condition we need to take care is that an extent might contains
unwritten and delayed status simultaneously because an extent is delayed
allocated and could be allocated by fallocate.  At this time we need to
keep delayed status because later we need to update delayed reservation
space using it.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>

This commit lets ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
because in later commit ext4_map_blocks needs to use this flag to
determine the extent status.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

This commit renames ext4_es_find_extent with ext4_es_find_delayed_extent
and improve this function.  First, we split input and output parameter.
Second, this function never return the first block of the next delayed
extent after 'es'.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan kara <jack@suse.cz>

This commit adds two members in extent_status structure to let it record
physical block and extent status.  Here es_pblk is used to record both
of them because physical block only has 48 bits.  So extent status could
be stashed into it so that we can save some memory.  Now written,
unwritten, delayed and hole are defined as status.

Due to new member is added into extent status tree, all interfaces need
to be adjusted.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

This commit refines the extent status tree code.

1) A prefix 'es_' is added to to the extent status tree structure
members.

2) Refactored es_remove_extent() so that __es_remove_extent() can be
used by es_insert_extent() to remove the old extent entry(-ies) before
inserting a new one.

3) Rename extent_status_end() to ext4_es_end()

4) ext4_es_can_be_merged() is define to check whether two extents can
be merged or not.

5) Update and clarified comments.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Use ERR_PTR()/IS_ERR() abstraction instead of passing in a separate
pointer to an integer for the error code, as a code cleanup.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The code to read in directory blocks and verify their metadata
checksums was replicated in ten different places across
fs/ext4/namei.c, and the code was buggy in subtle ways in a number of
those replicated sites.  In some cases, ext4_error() was called with a
training newline.  In others, in particularly in empty_dir(), it was
possible to call ext4_dirent_csum_verify() on an index block, which
would trigger false warnings requesting the system adminsitrator to
run e2fsck.

By refactoring the code, we make the code more readable, as well as
shrinking the compiled object file by over 700 bytes and 50 lines of
code.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Print some additional debugging context to hopefully help to debug a
warning which is getting triggered by xfstests #74.

Also remove extraneous newlines from when printk's were converted to
ext4_warning() and ext4_msg().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Some messages printed related to a WARN_ON(1) were printed using
KERN_NOTICE.  Use KERN_WARNING or ext4_warning() instead so that
context related to the WARN_ON() is printed at the same printk warning
level (and log files, etc.)
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There are multiple reasons to move away from debugfs.  First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the jbd2 module.

Secondly, as a module paramter it can be specified as a boot option if
jbd2 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/jbd2/parameters/jbd2_debug.  So it is more flexible.

Ultimately we want to move away from using jbd_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There are multiple reasons to move away from debugfs.  First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the ext4 module.

Secondly, as a module paramter it can be specified as a boot option if
ext4 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/ext4/parameters/mballoc_debug.  So it is more flexible.

Ultimately we want to move away from using mb_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In ext4_{create,mknod,mkdir,symlink}(), don't start the journal handle
until the inode has been succesfully allocated.  In order to do this,
we need to start the handle in the ext4_new_inode().  So create a new
variant of this function, ext4_new_inode_start_handle(), so the handle
can be created at the last possible minute, before we need to modify
the inode allocation bitmap block.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Operations which modify extended attributes may need extra journal
credits if inline data is used, since there is a chance that some
extended attributes may need to get pushed to an external attribute
block.

Changes to reflect this was made in xattr.c, but they were missed in
fs/ext4/acl.c.  To fix this, abstract the calculation of the number of
credits needed for xattr operations to an inline function defined in
ext4_jbd2.h, and use it in acl.c and xattr.c.

Also move the function declarations used in inline.c from xattr.h
(where they are non-obviously hidden, and caused problems since
ext4_jbd2.h needs to use the function ext4_has_inline_data), and move
them to ext4.h.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NTao Ma <boyu.mt@taobao.com>
Reviewed-by: NJan Kara <jack@suse.cz>

The ext4_unlink() and ext4_rmdir() don't actually release the blocks
associated with the file/directory.  This gets done in a separate jbd2
handle called via ext4_evict_inode().  Thus, we don't need to reserve
lots of journal credits for the truncate.

Note that using too many journal credits is non-optimal because it can
leading to the journal transmit getting closed too early, before it is
strictly necessary.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

The migration ioctl creates a temporary inode.  Since this inode is
never linked to a directory, we don't need to reserve journal credits
required for modifying the directory.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Don't start the jbd2 transaction handle until after the directory
entry has been found, to minimize the amount of time that a handle is
held active.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

The grab_cache_page_write_begin() function can potentially sleep for a
long time, since it may need to do memory allocation which can block
if the system is under significant memory pressure, and because it may
be blocked on page writeback.  If it does take a long time to grab the
page, it's better that we not hold an active jbd2 handle.

So grab a handle on the page first, and _then_ start the transaction
handle.

This commit fixes the following long transaction handle hold time:

postmark-2917  [000] ....   196.435786: jbd2_handle_stats: dev 254,32
   tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
   dirtied_blocks 0
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.

The recommended way for finding the longer-running handles is:

   T=/sys/kernel/debug/tracing
   EVENT=$T/events/jbd2/jbd2_handle_stats
   echo "interval > 5" > $EVENT/filter
   echo 1 > $EVENT/enable

   ./run-my-fs-benchmark

   cat $T/trace > /tmp/problem-handles

This will list handles that were active for longer than 20ms.  Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation.  Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:

postmark-2917  [000] ....   196.435786: jbd2_handle_stats: dev 254,32 
   tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
   dirtied_blocks 0
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Move the jbd2 wrapper functions which start and stop handles out of
super.c, where they don't really logically belong, and into
ext4_jbd2.c.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Handles which stay open a long time are problematic when it comes time
to close down a transaction so it can be committed.  These tracepoints
will help us determine which ones are the problematic ones, and to
validate whether changes makes things better or worse.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This reverts commit 93737456.

The cow-snapshots effort is no longer active, so remove these extra
fields to shrink down the handle structure.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Track the delay between when we first request that the commit begin
and when it actually begins, so we can see how much of a gap exists.
In theory, this should just be the remaining scheduling quantuum of
the thread which requested the commit (assuming it was not a
synchronous operation which triggered the commit request) plus
scheduling overhead; however, it's possible that real time processes
might get in the way of letting the kjournald thread from executing.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The ext4 block allocator only maintains buddy bitmaps for chunks which
are less than or equal to one quarter of a block group.  That is, for
a file aystem with a 1k blocksize, and where the number of blocks in a
block group is 8192 blocks, the largest chunk size tracked by buddy
bitmaps is 2048 blocks.

For a file system with a 4k blocksize, and where the number of blocks
in a block group is 32768 blocks, the largest chunk size tracked by
buddy bitmaps is 8192 blocks.

To work around this code, mballoc.c before this commit would truncate
allocation requests to the number of blocks in a block group minus 10.
Why 10?  Aside from being a completely arbitrary number, it avoids
block allocation to be a power of two larger than 25% of the block
group.  If you try to explicitly fallocate 50% of the block group
size, this will demonstrate the problem; the block allocation code
will scan the all of the blocks in the file system with cr==0 (since
the request is for a natural power of two), but then completely fail
for all blocks groups, since the buddy bitmaps don't track chunk sizes
of 50% of the block group.

To fix this, in these we use ext4_mb_complex_scan_group() instead of
ext4_mb_simple_scan_group().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>

Check for incompatible mount options when using the ext4 file system
driver to mount ext2 or ext3 file systems.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If argument of inode_readahead_blk is too big, we just bail out
without printing any error. Fix this since it could confuse users.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The loop looking for correct mount option entry is more logical if it is
written rewritten as an empty loop looking for correct option entry and then
code handling the option. It also saves one level of indentation for a lot of
code so we can join a couple of split lines.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Several mount option (resuid, resgid, journal_dev, journal_ioprio) are
currently handled before we enter standard option handling loop. I don't
see a reason for this so move them to normal handling loop to make things
more regular.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

It is unnecessary to check i<4 after the loop; just do it before the
break.
Signed-off-by: NCong Ding <dinggnu@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.
Signed-off-by: NNiu Yawei <yawei.niu@intel.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Commit 2147b1a6 resulted in a new smatch warning:

> fs/ext4/move_extent.c:693 mext_replace_branches()
> 	 warn: variable dereferenced before check 'dext' (see line 683)

Fix this by adding a check to make sure dext is non-NULL before we
derefrence it.
Signed-off-by: NAkria Fujita <a-fujita@rs.jp.nec.com>
[ modified by tytso to make sure an ext4_error is called ]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use WARN rather than printk followed by WARN_ON(1), for conciseness.

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression list es;
@@

-printk(
+WARN(1,
  es);
-WARN_ON(1);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Don't send an extra wakeup to kjournald in the case where we
already have the proper target in j_commit_request, i.e. that
transaction has already been requested for commit.

commit deeeaf13 "jbd2: fix fsync() tid wraparound bug" changed
the logic leading to a wakeup, but it caused some extra wakeups
which were found to lead to a measurable performance regression.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
[tytso@mit.edu: reworked check to make it clearer]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

CC: stable@vger.kernel.org
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

brelse() and ext4_journal_force_commit() are both inlined and able
to handle NULL.
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

After commit 978fef91 (create __ext4_insert_dentry for dir entry
insertion), 'reclen' is not used anymore.
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>