Fix a couple of infrequently encountered 'sleeping function called from
invalid context' in the cpuset hooks in __alloc_pages.  Could sleep while
interrupts disabled.

The routine cpuset_zone_allowed() is called by code in mm/page_alloc.c
__alloc_pages() to determine if a zone is allowed in the current tasks
cpuset.  This routine can sleep, for certain GFP_KERNEL allocations, if the
zone is on a memory node not allowed in the current cpuset, but might be
allowed in a parent cpuset.

But we can't sleep in __alloc_pages() if in interrupt, nor if called for a
GFP_ATOMIC request (__GFP_WAIT not set in gfp_flags).

The rule was intended to be:
  Don't call cpuset_zone_allowed() if you can't sleep, unless you
  pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
  the code that might scan up ancestor cpusets and sleep.

This rule was being violated in a couple of places, due to a bogus change
made (by myself, pj) to __alloc_pages() as part of the November 2005 effort
to cleanup its logic, and also due to a later fix to constrain which swap
daemons were awoken.

The bogus change can be seen at:
  http://linux.derkeiler.com/Mailing-Lists/Kernel/2005-11/4691.html
  [PATCH 01/05] mm fix __alloc_pages cpuset ALLOC_* flags

This was first noticed on a tight memory system, in code that was disabling
interrupts and doing allocation requests with __GFP_WAIT not set, which
resulted in __might_sleep() writing complaints to the log "Debug: sleeping
function called ...", when the code in cpuset_zone_allowed() tried to take
the callback_sem cpuset semaphore.

We haven't seen a system hang on this 'might_sleep' yet, but we are at
decent risk of seeing it fairly soon, especially since the additional
cpuset_zone_allowed() check was added, conditioning wakeup_kswapd(), in
March 2006.

Special thanks to Dave Chinner, for figuring this out, and a tip of the hat
to Nick Piggin who warned me of this back in Nov 2005, before I was ready
to listen.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The OSC set and query functions do not allocate enough space for return
values, and set the output buffer length to a false, too large value.  This
causes the acpi-ca code to assume that the output buffer is larger than it
actually is, and overwrite memory when copying acpi return buffers into
this caller provided buffer.  In some cases this can cause kernel oops if
the memory that is overwritten is a pointer.  This patch will change these
calls to use a dynamically allocated output buffer, thus allowing the
acpi-ca code to decide how much space is needed.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Yu, Luming" <luming.yu@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't reassign to watch.  If idr_find() returns NULL, then
put_inotify_watch() will choke.
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While doing some inotify stress testing, I hit the following race.  In
inotify_release(), it's possible for a watch to be removed from the lists
in between dropping dev->mutex and taking inode->inotify_mutex.  The
reference we hold prevents the watch from being freed, but not from being
removed.

Checking the dev's idr mapping will prevent a double list_del of the
same watch.
Signed-off-by: NAmy Griffis <amy.griffis@hp.com>
Acked-by: NJohn McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A bad calculation/loop in __section_nr() could result in incorrect section
information being put into sysfs memory entries.  This primarily impacts
memory add operations as the sysfs information is used while onlining new
memory.

Fix suggested by Dave Hansen.

Note that the bug may not be obvious from the patch.  It actually occurs in
the function's return statement:

	return (root_nr * SECTIONS_PER_ROOT) + (ms - root);

In the existing code, root_nr has already been multiplied by
SECTIONS_PER_ROOT.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

typo in #ifdefs.  Fixes http://bugme.osdl.org/show_bug.cgi?id=6538Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bernd Schmidt points out that binfmt_flat is now leaving the exec file open
while the application runs.  This offsets all the application's fd numbers.
We should have closed the file within exec(), not at exit()-time.

But there doesn't seem to be a lot of point in doing all this just to avoid
going over RLIMIT_NOFILE by one fd for a few microseconds.  So take the EMFILE
checking out again.  This will cause binfmt_flat to again fail LTP's
exec-should-return-EMFILE-when-fdtable-is-full test.  That test appears to be
wrong anyway - Open Group specs say nothing about exec() returning EMFILE.

Cc: Bernd Schmidt <bernd.schmidt@analog.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make a read of a HID device block until data is available.  Without it, the
read goes into a busy-wait loop until data is available.

Cc: Greg KH <greg@kroah.com>
Acked-by: NVojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Assigning the result of posix_acl_to_xattr() to an unsigned data type
(size/size_t) obscures possible errors.

Coverity CID: 1206.
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should be able to write 'repair' to /sys/block/mdX/md/sync_action,
however due to and inverted test, that always given EINVAL.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Address a problem found when a Linux NFS server uses the "subtree_check"
export option.

The "subtree_check" NFS export option was designed to prohibit a client
from using a file handle for which it should not have permission.  The
algorithm used is to ensure that the entire path to the file being
referenced is accessible to the user attempting to use the file handle.  If
some part of the path is not accessible, then the operation is aborted and
the appropriate version of ESTALE is returned to the NFS client.

The error, ESTALE, is unfortunate in that it causes NFS clients to make
certain assumptions about the continued existence of the file.  They assume
that the file no longer exists and refuse to attempt to access it again.
In this case, the file really does exist, but access was denied by the
server for a particular user.

A better error to return would be an EACCES sort of error.  This would
inform the client that the particular operation that it was attempting was
not allowed, without the nasty side effects of the ESTALE error.
Signed-off-by: NPeter Staubach <staubach@redhat.com>
Acked-By: NNeilBrown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update MAINTAINERS file for info regarding kdump maintainership.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It looks like the generic ide code now wants ide_init_hwif_ports() to set
the parent struct device into the ide_hw structure (new field ?).  Without
this, the mac ide code can cause the ide probing code to explode in flames
in sysfs registration due to what looks like a stale pointer in there
(happens when removing/re-inserting one of the hotswap media bays on some
laptops).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

i386 stack dump has a "<0>" in the middle of the line and an extra space
between columns in multicolumn mode.  Remove those and also remove an extra
blank line of source code.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There has been a longstanding problem with the Matrox G450 and perhaps
other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes
running Linux.  Higher resolutions and/or higher refresh rates resulted in
a very noticably "jittery" display, and sometimes no display, depending on
the physical monitor.  This patch fixes that problem on the systems I have
easy access to...

I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on
an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a
colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32
box (w/GXT135P).  I also tested it on IA32 box I have with a GXT135P to
verify that it didn't obviously break anything.  In my testing, I covered
single-card, single and dual-head setups using both HD15 and DVI-D signals,
on both the IA32 and ppc64 boxes.  While everything appeared fine on both
boxes, I did encounter one problem: I can't get any signal on the DVI-D
output on the ppc64 box.  However, this is also the case without my patch.

I just noticed that screen-blanking only occurs on the primary display as
well.
Signed-off-by: NPaul A. Clarke <pc@us.ibm.com>
Signed-off-by: NIan Romanick <idr@us.ibm.com>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Functions compat_nfs_svc_trans, compat_nfs_clnt_trans,
compat_nfs_exp_trans, compat_nfs_getfd_trans and compat_nfs_getfs_trans,
which are called by compat_sys_nfsservctl(fs/compat.c), don't handle the
return value of access_ok properly.  access_ok return 1 when the addr is
valid, and 0 when it's not, but these functions have the reversed
understanding.  When the address is valid, they always return -EFAULT to
compat_sys_nfsservctl.

An example is to run /usr/sbin/rpc.nfsd(32bit program on Power5).  It
doesn't function as expected.  strace showes that nfsservctl returns
-EFAULT.

The patch fixes this by correcting the error handling on the return value
of access_ok in the five functions.
Signed-off-by: NLin Feng Shen <shenlinf@cn.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With Manfred Spraul <manfred@colorfullife.com> and
     Andrew Morton <akpm@osdl.org>

Bring back this recently-reverted patch, only fixed.

Original changelog:

    From: Ayaz Abdulla <aabdulla@nvidia.com>

    This patch fixes the issues with multiple irqs.

    I am resending based on feedback. I decoupled the dma mask for
    consistent memory and fixed leak with multiple irq in error path.

    Thanks to Manfred for catching the spin lock problem.

Fix it:

    From: Manfred Spraul <manfred@colorfullife.com>

    Fix bug introduced by ebf34c9b, covered in
    http://bugzilla.kernel.org/show_bug.cgi?id=6568.

    Remove second instance of the request_irq() calls: they were moved
    from nv_open into nv_request_irq.

    Thanks to Alistair Strachan <alistair@devzero.co.uk> for reporting and
    persisting.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata-core: fix current kernel-doc warnings
  [PATCH] sata_mv: version bump
  [PATCH] sata_mv: endian fix
  [PATCH] sata_mv: remove local copy of queue indexes
  [PATCH] sata_mv: spurious interrupt workaround
  [PATCH] sata_mv: chip initialization fixes
  [PATCH] sata_mv: deal with interrupt coalescing interrupts
  [PATCH] sata_mv: prevent unnecessary double-resets

Fix all current kernel-doc warnings.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Increment the version number inside sata_mv.c.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This fixes a byte-swap issue on PPC, found by Zang Roy-r61911
on the powerpc platform.  His original patch also had some other
platform-specific changes in #ifdef's, but I'm not sure yet how to
incorporate them.  Look for another patch for those (soon).
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The driver currently keeps local copies of the hardware request/response queue indexes.
But it expends significant effort ensuring consistency between the two views,
and still gets it wrong after an error or reset occurs.

This patch removes the local copies, in favour of just accessing the hardware
whenever we need them.  Eventually this may need to be tweaked again for NCQ,
but for now this works and solves problems some users were seeing.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The 60xx chips, and possibly others, incorrectly assert DEV_IRQ interrupts
on a regular basis.  The cause of this is under investigation (by me and
in theory by Marvell also), but regardless we do need to deal with these events.

This patch tidies up some interrupt handler code, and ensures that we ignore
DEV_IRQ interrupts when the drive still  has ATA_BUSY asserted.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The interface control register of the 60xx (and later) Marvell chip
requires certain bits to always be set when writing to it.  These bits
incorrectly read-back as zeros, so the pattern must be ORed in
with each write of the register.  Also, bit 12 should NOT be set
(note that Marvell's own driver also had bit-12 wrong here).

While we're at it, we also now do pci_set_master() in the init code.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

In some systems, it is possible that the BIOS may have enabled interrupt coalescing
for the Marvell controllers which support it.  This patch adds code to detect/ack
interrupts from the chip's coalescing (combing) logic.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The mv_err_intr() function is invoked from the driver's interrupt handler,
as well as from the timeout function.  This patch prevents it from triggering
a one-after-the-other double reset of the controller when invoked
from the timeout function.

This also adds a check for a timeout race condition that has been observed
to occur with this driver in earlier kernels.  This should not be needed,
in theory, but in practice it has caught bugs.  Maybe nuke it at a later date.
Signed-off-by: NMark Lord <liml@rtr.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Call pci_map_single() with the actual size of the receive
buffers, not 0 (which skb->len is initialized to by dev_alloc_skb()).
Signed-off-by: NErling A. Jacobsen <linuxcub@email.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Dear Jeff

axnet_cs: bug fix multicast code (support older ax88190 chipset)

Signed-off-by: komurojun-mbn@nifty.com

Best Regards
Komuro
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The driver will get stuck (permanent transmit timeout), if the transmit
ring size is set too small.  It needs to have enough ring elements to
hold one maximum size transmit.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Skge driver always causes  bad checksums on big-endian.
The checksum in the receive control block was being swapped
when it doesn't need to be.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Need to track impact of this group of changes.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

If the status ring processing can't keep up with the incoming frames,
it is more efficient to have NAPI keep scheduling the poll routine
rather than causing another interrupt.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Logic error in the phy initialization code. Also, turn on wake on lan
bit in status control.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The Dlink DGE-560T uses Yukon2 chipset so it needs sky2 driver; and
the DGE-530T uses Yukon1 so it uses skge driver.

Bug: http://bugzilla.kernel.org/show_bug.cgi?id=6544Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

If both ports are receiving on the SysKonnect dual port cards,
then it appears the bus interface unit can give an interrupt status
for frame before DMA has completed.  This leads to bogus frames
and general confusion. This is why receive checksumming is also
messed up on dual port cards.

A workaround for the out of order receive problem is to eliminating
split transactions on PCI-X.

This version is based of the current linux-2.6.git including earlier
patch to disable dual ports.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Revert previous patch with subject "change mdelay to msleep and remove
from ISR path".  This patch seems to have caused bigger problems than
it solved, and it didn't solve much of a problem to begin with...

Discussion about backing-out this patch can be found here:

	http://marc.theaimsgroup.com/?l=linux-netdev&m=114321570402396&w=2

The git commit associated w/ the original patch is:

	6ba98d31

Signed-off-by: John W. Linville <linville@tuxdriver.com
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Revert ebf34c9b.  Maybe.  Due to crashes
at shutdown - see http://bugzilla.kernel.org/show_bug.cgi?id=6568.

Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Fix posting lists of 256 receive requests for Tavor
  IB/uverbs: Don't leak ref to mm on error path
  IB/srp: Complete correct SCSI commands on device reset
  IB/srp: Get rid of extra scsi_host_put()s if reconnection fails
  IB/srp: Don't wait for disconnection if sending DREQ fails
  IB/mthca: Make fw_cmd_doorbell default to 0