- 26 10月, 2010 1 次提交
-
-
由 James Smart 提交于
Fix critical errors - Update send_scsi_event to validate pnode pointer active before copying the wwpn information. - Add a message, mailbox_idle, and unlock before failing SECURITY_MGMT or AUTH_PORT mailbox commands - Prevent spin_lock_irqsave from being called twice in a row. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 08 10月, 2010 1 次提交
-
-
由 James Smart 提交于
- Fail I/Os with incomplete data that complete with SCSI Check condition. - Complete aborted I/Os with host_scribble equal to NULL with success. - Initialize context1 field of iocbq in the new_scsi_buf routines. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 06 9月, 2010 1 次提交
-
-
由 Mike Christie 提交于
This fixes a bug where the driver was resetting the rport dev_loss_tmo when devices were added by adding support for the get_host_def_dev_loss_tmo callout. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 07 8月, 2010 1 次提交
-
-
由 James Smart 提交于
- Remove unneeded Endian swap for Block Guard IOCB response - Add a check for mailbox active before issuing the heartbeat command - Correct heartbeat last_completion updates to avoid unneeded heartbeats - Add Security crypto support to CONFIG_PORT mailbox command - Add fips level and fips spec revision sysfs parameters - Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox - Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy - Change log message 0318 from an error to a warning as it is not an error - Patch an incorrect call to lpfc_drain_txq on SLI-3 functions Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 28 7月, 2010 6 次提交
-
-
由 James Smart 提交于
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- BSG interface related: - Fix node reference count if node is active - Warn if we're overwriting an active CT context - Discovery related: - Clear "Ignore Reg Login" flag when purging mailbox queue - Pay attention to return code for fc_block_scsi_eh() - Stall device loss code if we're almost done when it fires (we're logged in, but PRLI is outstanding) - Bugs - Correct DIF code for endianness issues - Correct where we had missed points to check txq on i/o completion/cleanup Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Fixed accounting of allocated SCSI buffers when post sgl fails. - Restrict scsi buffer allocation based on LUN count (sdev_cnt). - Create __lpfc_sli_free_rpi that doesn't take out the hbalock. - Modify lpfc_sli_free_rpi to call __lpfc_sli_free_rpi. - Call __lpfc_sli_free_rpi in lpfc_cleanup_pending_mbox. - Do not swap the strings returned in mailbox commands and do not swap byte aligned data in VPD. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Allow enabling MSI-X intterupts with fewer vectors than requested by looking at the return value from pci_enable_msix. - Implemented driver PCI AER error handling routines for supporting AER error recovering on SLI4 devices. - Remove redundant SLI_ACTIVE checks Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Fix hba_queue_depth to reflect actual available XRIs - Add support for new SLER specific firmware status codes. - Free SCSI buffer when iotag allocation fails. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 12 4月, 2010 1 次提交
-
-
由 James Smart 提交于
Update driver for change in T10-PI interface on adapter - Remove Profiles. - Add new SLI Opcodes. - Add new PDE structures used for BlockGuard. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 03 3月, 2010 2 次提交
-
-
由 James Smart 提交于
- Clear LPFC_DRIVER_ABORTED on FCP command completion. - Clear exchange busy flag when I/O is aborted and found on aborted list. - Free sglq when XRI_ABORTED event is processed before release of IOCB. - Only process iocb as aborted when LPFC_DRIVER_ABORTED is set. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Add Logging message for critial errors. - Remove unused variable from lpfc_nodev_tmo_show - Update supress_link_up parameter with #define values. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 18 2月, 2010 2 次提交
-
-
由 James Smart 提交于
- Convert all sysfs parameters to uint instead of int. - Add lpfc_supress_link_up parameter. - Change link_state to writable sysfs parameter. - Add support to be able to "up" or "down" link from link_state parameter. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Add support for the INTF (Interface) PCI register. - Add support for greater than 2 page SGLs. - Add support for up to 32 bit BDE lengths. - Implement the Port Capabilities Mailbox command. - Stop checking the Minor Code in the EQE structure. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 09 2月, 2010 2 次提交
-
-
由 James Smart 提交于
Display Logical Link Speed when supported and is non-zero. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Fix hardware/SLI relates issues: - Handle XB bit so that ELS XRIs are not prematurely released. - Handle XB bit so that FCP XRIs are not prematurely released. - Define new security SLI Commands. - Remove unused security SLI commands - Skip receive data size parameter check on received FLOGI. - Added LPFC_USE_FCPWQIDX flag to iocb to force SLI layer to submit abort WQE on same WQ as the command WQE. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 2月, 2010 1 次提交
-
-
由 Adam Buchbinder 提交于
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 12月, 2009 5 次提交
-
-
由 James Smart 提交于
Fix errors relating to crashes and hangs. - Fix crash due to list corruption while unloading driver. - Fix panic during pci-hot-plug testing. - Fix panic when unmapping luns. - Fixed total_scsi_bufs counting could cause exhausted memory. - Fixed locking issue causing hang. - Fixed the call from lpfc_new_scsi_buf_s3 to use lpfc_release_scsi_buf_s3. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
[SCSI] lpfc 8.3.5: fix fcp command polling, add FIP mode, performance optimisations and devloss timout fixes This patch includes the following changes: - Fixed Panic/Hang when using polling mode for fcp commands - Added support for Read_rev mbox bits indicating FIP mode of HBA - Optimize performance of slow-path handling of els responses - Add code to cleanup orphaned unsolicited receive sequences - Fixed Devloss timeout when multiple initiators are in same zone Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Move the duplicated code from FC LLDs to SCSI FC transport class. Acked-by: NJames Smart <james.smart@emulex.com> Acked-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Acked-by: NAbhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 02 10月, 2009 1 次提交
-
-
由 Martin K. Petersen 提交于
The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Acked-by: NIhab Hamadi <Ihab.Hamadi@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 23 8月, 2009 2 次提交
-
-
由 James Smart 提交于
Remove spaces before newlines in several log messages Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Add bsg (SGIOv4) support for sending and receiving ELS, CT commands This patch adds a new file, lpfc_bsg.c. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 15 6月, 2009 2 次提交
-
-
由 James Smart 提交于
Patch was originally submitted upstream on 4/21/2008: http://marc.info/?l=linux-scsi&m=120880973719266&w=2 Somewhere, it never get merged. The patch restructures the task mgmt routines, commonizing like behavior. Then the patch changes device reset to LUN resets, and adds a target reset handler. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Contains the following changes - Set the CT field of FDISC to 3 - Fixed over allocation of SCSI buffers on SLI4 - Removed unused jump table entries - Increase LPFC_WQE_DEF_COUNT to 256 - Updated FDISC context to VPI - Fixed immediate SCSI command for LUN reset translation to WQE - Extended mailbox handling to allow MBX_POLL commands in between async MBQ commands - Fixed SID used for FDISC - Fix crash when accessing ctlregs from sysfs for SLI4 HBAs - Fix SLI4 firmware version not being saved or displayed correctly - Expand CQID field in WQE structure to 16 bits - Fix post header template mailbox command timing out - Removed FCoE PCI device ID 0x0705 Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 13 6月, 2009 1 次提交
-
-
由 Martin Olsson 提交于
trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments. Signed-off-by: NMartin Olsson <martin@minimum.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 6月, 2009 4 次提交
-
-
由 James Smart 提交于
Add support for persistent vport definitions at creation at boot time Also includes a few misc fixes for: - conversion to vpi name from vport slang name - couple of small mailbox references - some additional discovery mods Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Update of copyrights on modified files Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 11 5月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: NMike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 27 4月, 2009 2 次提交
-
-
由 James Smart 提交于
8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 15 4月, 2009 1 次提交
-
-
由 David Howells 提交于
Fix lpfc_parse_bg_err()'s use of do_div(). It should be passing a 64-bit variable as the first parameter. However, since it's only using a 32-bit variable, it doesn't need to use do_div() at all, but can instead use the division operator. This deals with the following warnings: CC drivers/scsi/lpfc/lpfc_scsi.o drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err': drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 3月, 2009 1 次提交
-
-
由 Martin K. Petersen 提交于
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 30 12月, 2008 1 次提交
-
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-